Hi All,
I have a bluetooth USB dongle connected to our embedded device. I am
having problem in making my embedded device locatable by other devices. I
am able to scan the list of devices in the vicinity from my device. I have
made sure that PSCAN and ISCAN are enabled. Inspite of that my embedded
device is not locatable by other devices.
The output of "hciconfig" is:
hci0: Type: USB
BD Address: 00:02:72:01:C3:A0 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:151 acl:0 sco:0 events:15 errors:0
TX bytes:42 acl:0 sco:0 commands:10 errors:0
Please let me know, how can I proceed further in fixing this issue. I am
using linux kernel 2.6.20 and bluez-libs/utils 3.9.
Thanks in advance,
--
N Santhosh
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Mats,
Thanks for the reply. It worked for me.
Warm Regards,
--
N Santhosh,
On Tue, 10 Jul 2007, Mats Erik Andersson wrote:
> Hi Santhosh,
>
> you should add a line to hcid.conf in the device block:
>
> device {
> ...
> discoverto 0;
> ...
> }
>
> This disables the timer that normally shuts the window
> allowing for external discovery. Make "man hcid.conf"
> to learn more.
>
> Regards, Mats E A
>
>
>
> tis 2007-07-10 klockan 17:11 +0530 skrev Santhosh N:
>> Hi All,
>>
>> I have a bluetooth USB dongle connected to our embedded device. I am
>> having problem in making my embedded device locatable by other devices. I
>> am able to scan the list of devices in the vicinity from my device. I have
>> made sure that PSCAN and ISCAN are enabled. Inspite of that my embedded
>> device is not locatable by other devices.
>>
>> The output of "hciconfig" is:
>> hci0: Type: USB
>> BD Address: 00:02:72:01:C3:A0 ACL MTU: 192:8 SCO MTU: 64:8
>> UP RUNNING PSCAN ISCAN
>> RX bytes:151 acl:0 sco:0 events:15 errors:0
>> TX bytes:42 acl:0 sco:0 commands:10 errors:0
>>
>> Please let me know, how can I proceed further in fixing this issue. I am
>> using linux kernel 2.6.20 and bluez-libs/utils 3.9.
>>
>> Thanks in advance,
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Santhosh,
you should add a line to hcid.conf in the device block:
device {
...
discoverto 0;
...
}
This disables the timer that normally shuts the window
allowing for external discovery. Make "man hcid.conf"
to learn more.
Regards, Mats E A
tis 2007-07-10 klockan 17:11 +0530 skrev Santhosh N:
> Hi All,
>
> I have a bluetooth USB dongle connected to our embedded device. I am
> having problem in making my embedded device locatable by other devices. I
> am able to scan the list of devices in the vicinity from my device. I have
> made sure that PSCAN and ISCAN are enabled. Inspite of that my embedded
> device is not locatable by other devices.
>
> The output of "hciconfig" is:
> hci0: Type: USB
> BD Address: 00:02:72:01:C3:A0 ACL MTU: 192:8 SCO MTU: 64:8
> UP RUNNING PSCAN ISCAN
> RX bytes:151 acl:0 sco:0 events:15 errors:0
> TX bytes:42 acl:0 sco:0 commands:10 errors:0
>
> Please let me know, how can I proceed further in fixing this issue. I am
> using linux kernel 2.6.20 and bluez-libs/utils 3.9.
>
> Thanks in advance,
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users