when I scan for bluetooth in my palm E2 I dont see the pc. I do see the
cellular and a pc running a previous version of bluez:
my kernel: 2.6.21-gentoo
bluez-libs-3.18 bluez-utils-3.18 bluez-hcidump-1.40
I run hcidump -X and I dont get anything when initiating the scan from
the palm.
however, I can find and ping the palm from the pc:
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:07:E0:56:6B:53 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 42
Features: 0xff 0xff 0x0d 0x00 0x00 0x00 0x00 0x00
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:07:E0:56:6B:53 name 'E2'
> ACL data: handle 42 flags 0x02 dlen 28
L2CAP(s): Echo rsp: dlen 20
41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
< ACL data: handle 42 flags 0x02 dlen 52
L2CAP(s): Echo req: dlen 44
41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68
41 42 43 44
how can I turn my pc to be discoverable?
/etc/bluetooth/hcid.conf:
#
# HCI daemon configuration file.
#
# HCId options
options {
# Automatically initialize new devices
autoinit yes;
# Security Manager mode
# none - Security manager disabled
# auto - Use local PIN for incoming connections
# user - Always ask user for a PIN
#
security auto;
# Pairing mode
# none - Pairing disabled
# multi - Allow pairing with already paired devices
# once - Pair once and deny successive attempts
pairing multi;
# Default PIN code for incoming connections
passkey /etc/bluetooth/pin-helper;
}
# Default settings for HCI devices
device {
# Local device name
# %d - device id
# %h - host name
##name "BlueZ on %h (%d)";
name "BlueZ on %h (%d)";
# Local device class
## old ?
class 0x3e0100;
##new?? class 0x000100;
# Default packet type
#pkt_type DH1,DM1,HV1;
# Inquiry and Page scan
iscan enable; pscan enable;
# Default link mode
# none - no specific policy
# accept - always accept incoming connections
# master - become master on incoming connections,
# deny role switch on outgoing connections
lm accept;
# Default link policy
# none - no specific policy
# rswitch - allow role switch
# hold - allow hold mode
# sniff - allow sniff mode
# park - allow park mode
lp rswitch,hold,sniff,park;
}
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
On 9/12/07, Niv <[email protected]> wrote:
> update: I switched to an old dongle and I can now discover the pc:
I have a couple off-brand adapters, one a Class 2 with an invalid bd
addr (11:11:11:11:11:11) and the other one's a Class 1 "MSI Star Key
2.0". The no-name
one works fine if I insert it after booting, but the Class 1 dongle
only works properly on one of my Ubuntu 7.04 systems if it's hooked up
at boot. If I try to connect it after the machine is started up, I can
see the dongle and scan with it; Possibly there's a timing issue
there.
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
update: I switched to an old dongle and I can now discover the pc:
works:
HCI Ver: 1.1 (0x1) HCI Rev: 0x33c LMP Ver: 1.1 (0x1) LMP Subver: 0x33c
Manufacturer: Cambridge Silicon Radio (10)
doesnt work:
HCI Ver: 2.0 (0x3) HCI Rev: 0x7a6 LMP Ver: 2.0 (0x3) LMP Subver: 0x7a6
Manufacturer: Cambridge Silicon Radio (10)
this is odd as I bought this by the bluez developers advice.
its a bluetake BT007Ex
does anyone use such an adaptor with current bluez? is my device defected?
Niv
Niv wrote:
> when I scan for bluetooth in my palm E2 I dont see the pc. I do see the
> cellular and a pc running a previous version of bluez:
> my kernel: 2.6.21-gentoo
> bluez-libs-3.18 bluez-utils-3.18 bluez-hcidump-1.40
> I run hcidump -X and I dont get anything when initiating the scan from
> the palm.
>
> however, I can find and ping the palm from the pc:
>
> < HCI Command: Remote Name Request (0x01|0x0019) plen 10
> bdaddr 00:07:E0:56:6B:53 mode 2 clkoffset 0x0000
>> HCI Event: Command Status (0x0f) plen 4
> Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
>> HCI Event: Read Remote Supported Features (0x0b) plen 11
> status 0x00 handle 42
> Features: 0xff 0xff 0x0d 0x00 0x00 0x00 0x00 0x00
>> HCI Event: Remote Name Req Complete (0x07) plen 255
> status 0x00 bdaddr 00:07:E0:56:6B:53 name 'E2'
>> ACL data: handle 42 flags 0x02 dlen 28
> L2CAP(s): Echo rsp: dlen 20
> 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
> < ACL data: handle 42 flags 0x02 dlen 52
> L2CAP(s): Echo req: dlen 44
> 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 4F 50 51 52 53 54
> 55 56 57 58 59 5A 5B 5C 5D 5E 5F 60 61 62 63 64 65 66 67 68
> 41 42 43 44
>
> how can I turn my pc to be discoverable?
>
> /etc/bluetooth/hcid.conf:
> #
> # HCI daemon configuration file.
> #
>
> # HCId options
> options {
> # Automatically initialize new devices
> autoinit yes;
>
> # Security Manager mode
> # none - Security manager disabled
> # auto - Use local PIN for incoming connections
> # user - Always ask user for a PIN
> #
> security auto;
>
> # Pairing mode
> # none - Pairing disabled
> # multi - Allow pairing with already paired devices
> # once - Pair once and deny successive attempts
> pairing multi;
>
> # Default PIN code for incoming connections
> passkey /etc/bluetooth/pin-helper;
> }
>
> # Default settings for HCI devices
> device {
> # Local device name
> # %d - device id
> # %h - host name
> ##name "BlueZ on %h (%d)";
> name "BlueZ on %h (%d)";
>
> # Local device class
> ## old ?
> class 0x3e0100;
> ##new?? class 0x000100;
>
> # Default packet type
> #pkt_type DH1,DM1,HV1;
>
> # Inquiry and Page scan
> iscan enable; pscan enable;
>
> # Default link mode
> # none - no specific policy
> # accept - always accept incoming connections
> # master - become master on incoming connections,
> # deny role switch on outgoing connections
> lm accept;
>
> # Default link policy
> # none - no specific policy
> # rswitch - allow role switch
> # hold - allow hold mode
> # sniff - allow sniff mode
> # park - allow park mode
> lp rswitch,hold,sniff,park;
> }
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2005.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users