HI
I am working on Au1200 processor and i use linux-2.6.11 and now i am
trying USB Bluetooth in it .I need to compile bluetooth libraries and
bluetooth utils for it.I downloaded the following files,
bluez-libs-3.13.tar.gz
bluez-utils-3.13.tar.gz
I compile the library as follows,
./configure --host=mipsel --prefix=/usr --enable-shared=no
--enable-static=yes
make
make install DESTDIR=$PWD/bluez1
it compiled and next to compile bluez-utils
./configure \
--host=mipsel \
--with-bluez=$PWD/../bluez-libs-2.25/install/usr \
CPPFLAGS="-DLINUX" \
LDFLAGS="-Wl,-elf2flt"
then make
following are the errors ,
make[3]: Entering directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I../sdpd -DLINUX
-I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
-DDBUS_API_SUBJECT_TO_CHANGE -I../eglib -Wall -O2 -D_FORTIFY_SOURCE=2 -MT
device.o -MD -MP -MF .deps/device.Tpo -c -o device.o device.c
device.c: In function 'start_device':
device.c:271: error: 'LMP_PAUSE_ENC' undeclared (first use in this function)
device.c:271: error: (Each undeclared identifier is reported only once
device.c:271: error: for each function it appears in.)
device.c:277: error: 'LMP_NFLUSH_PKTS' undeclared (first use in this
function)
device.c:280: error: 'LMP_LSTO' undeclared (first use in this function)
make[3]: *** [device.o] Error 1
make[3]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13'
make: *** [all] Error 2
could anyone tell me where am going wrong.
waiting for suggestions
thank you
Regards
Umesh
Hi,
> Thanks for your reply.Can you guide how to proceed, i use linux-2.6.11
> for MIPS architecture(Au1200 processor) shall i use some other version
> will it help and can you verify whether my configuration and
> compilation is correct.waiting for your kind reply.
the latest upstream kernel is 2.6.22. So you should start using the
latest one and not stick with some ancient one.
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Marcel,
Thanks for your reply.Can you guide how to proceed, i use linux-2.6.11 for
MIPS architecture(Au1200 processor) shall i use some other version will it
help and can you verify whether my configuration and compilation is
correct.waiting for your kind reply.
Regards
Umesh
On 8/8/07, Marcel Holtmann <[email protected]> wrote:
>
> Hi,
>
> > I am working on Au1200 processor and i use linux-2.6.11 and now i
> > am trying USB Bluetooth in it .I need to compile bluetooth libraries
> > and bluetooth utils for it.I downloaded the following files,
> > bluez-libs-3.13.tar.gz
> >
> > bluez-utils-3.13.tar.gz
> >
> > I compile the library as follows,
> > ./configure --host=mipsel --prefix=/usr --enable-shared=no
> > --enable-static=yes
> > make
> > make install DESTDIR=$PWD/bluez1
> >
> > it compiled and next to compile bluez-utils
> >
> > ./configure \
> > --host=mipsel \
> > --with-bluez=$PWD/../bluez-libs-2.25/install/usr \
> > CPPFLAGS="-DLINUX" \
> > LDFLAGS="-Wl,-elf2flt"
> >
> > then make
> >
> > following are the errors ,
> >
> > make[3]: Entering directory
> > `/home/busybox/bluez/bluez-utils-3.13/hcid'
> > gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I../sdpd -DLINUX
> > -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
> > -DDBUS_API_SUBJECT_TO_CHANGE -I../eglib -Wall -O2 -D_FORTIFY_SOURCE=2
> > -MT device.o -MD -MP -MF .deps/device.Tpo -c -o device.o device.c
> > device.c: In function 'start_device':
> > device.c:271: error: 'LMP_PAUSE_ENC' undeclared (first use in this
> > function)
> > device.c:271: error: (Each undeclared identifier is reported only once
> > device.c:271: error: for each function it appears in.)
> > device.c:277: error: 'LMP_NFLUSH_PKTS' undeclared (first use in this
> > function)
> > device.c:280: error: 'LMP_LSTO' undeclared (first use in this
> > function)
> > make[3]: *** [device.o] Error 1
> > make[3]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
> > make[2]: *** [all] Error 2
> > make[2]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13'
> > make: *** [all] Error 2
> >
> > could anyone tell me where am going wrong.
>
> your includes are screwed up. You need to make sure it uses the headers
> of bluez-utils-3.13 and not some older ones installed one your system.
>
> Regards
>
> Marcel
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems? Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
Hi,
> I am working on Au1200 processor and i use linux-2.6.11 and now i
> am trying USB Bluetooth in it .I need to compile bluetooth libraries
> and bluetooth utils for it.I downloaded the following files,
> bluez-libs-3.13.tar.gz
>
> bluez-utils-3.13.tar.gz
>
> I compile the library as follows,
> ./configure --host=mipsel --prefix=/usr --enable-shared=no
> --enable-static=yes
> make
> make install DESTDIR=$PWD/bluez1
>
> it compiled and next to compile bluez-utils
>
> ./configure \
> --host=mipsel \
> --with-bluez=$PWD/../bluez-libs-2.25/install/usr \
> CPPFLAGS="-DLINUX" \
> LDFLAGS="-Wl,-elf2flt"
>
> then make
>
> following are the errors ,
>
> make[3]: Entering directory
> `/home/busybox/bluez/bluez-utils-3.13/hcid'
> gcc -DHAVE_CONFIG_H -I. -I.. -I../common -I../sdpd -DLINUX
> -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include
> -DDBUS_API_SUBJECT_TO_CHANGE -I../eglib -Wall -O2 -D_FORTIFY_SOURCE=2
> -MT device.o -MD -MP -MF .deps/device.Tpo -c -o device.o device.c
> device.c: In function 'start_device':
> device.c:271: error: 'LMP_PAUSE_ENC' undeclared (first use in this
> function)
> device.c:271: error: (Each undeclared identifier is reported only once
> device.c:271: error: for each function it appears in.)
> device.c:277: error: 'LMP_NFLUSH_PKTS' undeclared (first use in this
> function)
> device.c:280: error: 'LMP_LSTO' undeclared (first use in this
> function)
> make[3]: *** [device.o] Error 1
> make[3]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
> make[2]: *** [all] Error 2
> make[2]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13/hcid'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/busybox/bluez/bluez-utils-3.13'
> make: *** [all] Error 2
>
> could anyone tell me where am going wrong.
your includes are screwed up. You need to make sure it uses the headers
of bluez-utils-3.13 and not some older ones installed one your system.
Regards
Marcel
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users