Hi All:
I ported the bluez-libs-2.25 and bluez-utils-2.25 to an embedded system
last week, but when I plug my usb bluetooth dongle into the board, it
says"usb device not accepting new address", so I can't use my bluetooth
dongle in this embedded system.
I'sure my usb bluetooth is well, it worked normally on PC (FedoraCore4).
And the usb interface on board is well too, because when I pluged my
U-disk into it ,the U-disk worked normally.
Then why my usb dongle didn't work on the embedded system board?
Regards
bees
Hi,
> my kernel is 2.4.20, and proecssor is imx21 of freescale.
> According your reply, if i use the 2.6 kernel , the usb device will be
> ok?
it is not a 100% guarantee, but the USB stack from a recent 2.6 kernel
improved a lot compared to any 2.4 kernel.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Marcel:
thank you for reply.
my kernel is 2.4.20, and proecssor is imx21 of freescale.
According your reply, if i use the 2.6 kernel , the usb device will be ok?
Best Regards
Bees
2006/7/26, Marcel Holtmann <[email protected]>:
>
> Hi Bees,
>
> > I ported the bluez-libs-2.25 and bluez-utils-2.25 to an embedded
> > system last week, but when I plug my usb bluetooth dongle into the
> > board, it says"usb device not accepting new address", so I can't use
> > my bluetooth dongle in this embedded system.
> > I'sure my usb bluetooth is well, it worked normally on PC
> > (FedoraCore4).
> > And the usb interface on board is well too, because when I pluged
> > my U-disk into it ,the U-disk worked normally.
> > Then why my usb dongle didn't work on the embedded system board?
>
> what kernel version are you using? The recent 2.6 kernels are a little
> bit more robust when it comes to cheap USB hardware.
>
> Regards
>
> Marcel
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys -- and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
Hi Bees,
> I ported the bluez-libs-2.25 and bluez-utils-2.25 to an embedded
> system last week, but when I plug my usb bluetooth dongle into the
> board, it says"usb device not accepting new address", so I can't use
> my bluetooth dongle in this embedded system.
> I'sure my usb bluetooth is well, it worked normally on PC
> (FedoraCore4).
> And the usb interface on board is well too, because when I pluged
> my U-disk into it ,the U-disk worked normally.
> Then why my usb dongle didn't work on the embedded system board?
what kernel version are you using? The recent 2.6 kernels are a little
bit more robust when it comes to cheap USB hardware.
Regards
Marcel
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users