Hi everyone,
I am working with two bluetooth USB dongles. I use bluez-utils-2.25
and bluez-libs-2.25 packet. I use redhat9.0 with linux kernel 2.4.20,
I am not familier with kernel update, so I don't use bluez patch to
2.4.20.
They are connected to the same host. However I cannot l2ping one from
the other.
info as follows:
[root@localhost root]# l2ping -i 00:11:67:20:7e:33 00:11:67:1a:a7:0f
Can't connect: Host is down
And it looks like they are configured:
[root@localhost root]# hciconfig -a hci0
hci0: Type: USB
BD Address: 00:11:67:1A:A7:0F ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN INQUIRY
RX bytes:1038 acl:0 sco:0 events:38 errors:0
TX bytes:923 acl:0 sco:0 commands:38 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver: 0x=
1fe
Manufacturer: Integrated System Solution Corp. (57)
[root@localhost root]# hciconfig -a hci1
hci1: Type: USB
BD Address: 00:11:67:20:7E:33 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN
RX bytes:724 acl:0 sco:0 events:58 errors:0
TX bytes:1075 acl:0 sco:0 commands:49 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (1)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1f4 LMP Ver: 1.2 (0x2) LMP Subver: 0x=
1f4
Manufacturer: Integrated System Solution Corp. (57)
load module as follows:
[root@localhost bluez-utils-2.25]# lsmod
Module Size Used by Not tainted
l2cap 19276 1
hci_usb 8920 2
bluez 40132 11 [l2cap hci_usb]
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5116 1 (autoclean)
vfat 13004 1 (autoclean)
fat 38808 0 (autoclean) [vfat]
ide-cd 35708 0 (autoclean)
cdrom 33728 0 (autoclean) [ide-cd]
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
sis900 16812 1
ipt_REJECT 3928 6 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 15096 2 [ipt_REJECT iptable_filter]
microcode 4668 0 (autoclean)
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [keybdev mousedev hid]
ehci-hcd 19976 0 (unused)
usb-ohci 21480 0 (unused)
usbcore 78784 1 [hci_usb hid ehci-hcd usb-ohci]
[root@localhost bluez-utils-2.25]#
Can anyone figure out what"s wrong?
Thanks in advance,
yong Zhu
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
---------- Forwarded message ----------
From: zhu yong <[email protected]>
Date: Mar 29, 2006 10:36 PM
Subject: l2ping problem about "Can't connect: Host is down"
To: [email protected]
Hi everyone,
I am working with two bluetooth USB dongles. I use bluez-utils-2.25
and bluez-libs-2.25 packet. I use redhat9.0 with linux kernel 2.4.20,
I am not familier with kernel update, so I don't use bluez patch to
2.4.20.
They are connected to the same host. However I cannot l2ping one from
the other.
info as follows:
[root@localhost root]# l2ping -i 00:11:67:20:7e:33 00:11:67:1a:a7:0f
Can't connect: Host is down
And it looks like they are configured:
[root@localhost root]# hciconfig -a hci0
hci0: Type: USB
BD Address: 00:11:67:1A:A7:0F ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN INQUIRY
RX bytes:1038 acl:0 sco:0 events:38 errors:0
TX bytes:923 acl:0 sco:0 commands:38 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (0)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver:
0x1fe
Manufacturer: Integrated System Solution Corp. (57)
[root@localhost root]# hciconfig -a hci1
hci1: Type: USB
BD Address: 00:11:67:20:7E:33 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN
RX bytes:724 acl:0 sco:0 events:58 errors:0
TX bytes:1075 acl:0 sco:0 commands:49 errors:0
Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'BlueZ (1)'
Class: 0x3e0100
Service Classes: Networking, Rendering, Capturing
Device Class: Computer, Uncategorized
HCI Ver: 1.2 (0x2) HCI Rev: 0x1f4 LMP Ver: 1.2 (0x2) LMP Subver:
0x1f4
Manufacturer: Integrated System Solution Corp. (57)
load module as follows:
[root@localhost bluez-utils-2.25]# lsmod
Module Size Used by Not tainted
l2cap 19276 1
hci_usb 8920 2
bluez 40132 11 [l2cap hci_usb]
nls_iso8859-1 3516 1 (autoclean)
nls_cp437 5116 1 (autoclean)
vfat 13004 1 (autoclean)
fat 38808 0 (autoclean) [vfat]
ide-cd 35708 0 (autoclean)
cdrom 33728 0 (autoclean) [ide-cd]
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
sis900 16812 1
ipt_REJECT 3928 6 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 15096 2 [ipt_REJECT iptable_filter]
microcode 4668 0 (autoclean)
keybdev 2944 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5856 0 [keybdev mousedev hid]
ehci-hcd 19976 0 (unused)
usb-ohci 21480 0 (unused)
usbcore 78784 1 [hci_usb hid ehci-hcd usb-ohci]
[root@localhost bluez-utils-2.25]#
Can anyone figure out what"s wrong?
Thanks in advance,
yong Zhu
try it with hcidump -X -V and post the dump.
-albert
On 3/29/06, zhu yong <[email protected]> wrote:
>
>
>
> ---------- Forwarded message ----------
> From: zhu yong <[email protected]>
> Date: Mar 29, 2006 10:36 PM
> Subject: l2ping problem about "Can't connect: Host is down"
> To: [email protected]
>
> Hi everyone,
>
> I am working with two bluetooth USB dongles. I use bluez-utils-2.25
> and bluez-libs-2.25 packet. I use redhat9.0 with linux kernel 2.4.20,
> I am not familier with kernel update, so I don't use bluez patch to
> 2.4.20.
> They are connected to the same host. However I cannot l2ping one from
> the other.
> info as follows:
> [root@localhost root]# l2ping -i 00:11:67:20:7e:33 00:11:67:1a:a7:0f
> Can't connect: Host is down
>
> And it looks like they are configured:
> [root@localhost root]# hciconfig -a hci0
> hci0: Type: USB
> BD Address: 00:11:67:1A:A7:0F ACL MTU: 678:8 SCO MTU: 48:10
> UP RUNNING PSCAN ISCAN INQUIRY
> RX bytes:1038 acl:0 sco:0 events:38 errors:0
> TX bytes:923 acl:0 sco:0 commands:38 errors:0
> Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (0)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0x1fe LMP Ver: 1.2 (0x2) LMP Subver:
> 0x1fe
> Manufacturer: Integrated System Solution Corp. (57)
>
> [root@localhost root]# hciconfig -a hci1
> hci1: Type: USB
> BD Address: 00:11:67:20:7E:33 ACL MTU: 678:8 SCO MTU: 48:10
> UP RUNNING PSCAN ISCAN
> RX bytes:724 acl:0 sco:0 events:58 errors:0
> TX bytes:1075 acl:0 sco:0 commands:49 errors:0
> Features: 0xbf 0xfe 0x8d 0x78 0x08 0x18 0x00 0x00
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH HOLD SNIFF PARK
> Link mode: SLAVE ACCEPT
> Name: 'BlueZ (1)'
> Class: 0x3e0100
> Service Classes: Networking, Rendering, Capturing
> Device Class: Computer, Uncategorized
> HCI Ver: 1.2 (0x2) HCI Rev: 0x1f4 LMP Ver: 1.2 (0x2) LMP Subver:
> 0x1f4
> Manufacturer: Integrated System Solution Corp. (57)
>
> load module as follows:
> [root@localhost bluez-utils-2.25]# lsmod
> Module Size Used by Not tainted
> l2cap 19276 1
> hci_usb 8920 2
> bluez 40132 11 [l2cap hci_usb]
> nls_iso8859-1 3516 1 (autoclean)
> nls_cp437 5116 1 (autoclean)
> vfat 13004 1 (autoclean)
> fat 38808 0 (autoclean) [vfat]
> ide-cd 35708 0 (autoclean)
> cdrom 33728 0 (autoclean) [ide-cd]
> parport_pc 19076 1 (autoclean)
> lp 8996 0 (autoclean)
> parport 37056 1 (autoclean) [parport_pc lp]
> autofs 13268 0 (autoclean) (unused)
> sis900 16812 1
> ipt_REJECT 3928 6 (autoclean)
> iptable_filter 2412 1 (autoclean)
> ip_tables 15096 2 [ipt_REJECT iptable_filter]
> microcode 4668 0 (autoclean)
> keybdev 2944 0 (unused)
> mousedev 5492 1
> hid 22148 0 (unused)
> input 5856 0 [keybdev mousedev hid]
> ehci-hcd 19976 0 (unused)
> usb-ohci 21480 0 (unused)
> usbcore 78784 1 [hci_usb hid ehci-hcd usb-ohci]
> [root@localhost bluez-utils-2.25]#
>
> Can anyone figure out what"s wrong?
>
> Thanks in advance,
> yong Zhu
>