Hi Erwin
>you need to specify --prefix=\"\" for "configure" in bluez-utils and
>bluez-libs for cross compiling.
>-Erwin
I follow your suggest that set --prefix=/.
but the cmd 'hcid -n' still can not stop. And the cmd 'hciattach /dev/ttyS1
bcsp 115200' have the error 'bcsp_recv: Error in BCSP hdr checksum'.
I read some old mail in this maillist, said the error can ignore.
How can i do to use my device.
Info as follows:
# ./hcid -n -f /bluez/etc/bluetooth/hcid.conf
hcid[31]: Bluetooth HCI daemon
hcid[31]: Exit.
# ./hciattach /dev/ttyS1 bcsp 115200
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Error in BCSP hdr checksum
#
Thanks
yong Zhu
> I use the cmd 'hcid', but find that hcid find the pin file from error
> directory.
> the /home/chenjiajing/bluez/ is my compile directory.
> How can I change to the correct directory of '/etc/bluetooth/pin'?
> info as follows:
> # ./hcid -n -f /etc/bluetooth/hcid.conf
> hcid[32]: Bluetooth HCI daemon
> hcid[32]: Can't open PIN
> file /home/chenjiajing/bluez//etc/bluetooth/pin. No suc
> h file or directory(2)
> hcid[33]: Can't init device hci0. Connection timed out(110)
>