(Resent, as it was sent from the wrong address the first time)
Hey all,
I'm working on getting a newly aquired Philips PC Card working, using a
2.6.10 kernel (-gentoo-r4 to be specific). I believe i've run into the
problem as described here (and as potentially fixed for some -mmX sources):
http://sourceforge.net/mailarchive/message.php?msg_id=9953048,
which claimed to be resolved for 2.6.10-rc1-mm2, which I also gave a
try, but was unable to actually test, as my keyboard refused to work
with that kernel. I've also tried 2.6.10-mm2, with the same failure.
Here's the info on the card:
lspci -vvv for the card:
0000:03:00.0 Serial controller: Oxford Semiconductor Ltd OXCB950 Cardbus 16950 UART (prog-if 06 [16950])
Subsystem: Oxford Semiconductor Ltd: Unknown device 0001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 4010
Region 1: Memory at 40800000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 4000 [size=16]
Region 3: Memory at 40801000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at 40802000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
dmesg, after implementing the small patch discussed here to recognize the card
http://www.cs.helsinki.fi/linux/linux-kernel/2002-08/1374.html:
PCI: Enabling device 0000:03:00.0 (0000 -> 0003)
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 11 (level, low) -> IRQ 11
ttyS14: detected caps 00000700 should be 00000100
ttyS14 at I/O 0x4010 (irq = 11) is a 16C950/954
Having found the specs based on the FCC ID on the FCC site, i know this
is the OXford Semiconductor chipset with a BlueCore01 inside. As such, I
tried:
gonzo root # hciattach /dev/ttyS14 bcsp 921600
BCSP initialization timed out
Was there ever any success in finding out what had changed for the user
who reported success for 2.6.10-r1-mm2? Any suggestions on ways to debug
this? Thanks in advance.
-pete
--
Peter Johanson
<[email protected]>
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Peter,
> (Resent, as it was sent from the wrong address the first time)
> Hey all,
look for the answer in the previous thread, because I am not going to
repost it.
Regards
Marcel
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users