Hi folks,
I am trying to create a PAN using PAND. Actually I am following the
"Personal Networking Area How-To" which can be found at Bluez.org.
Let explain what i am doing:
In both sides (GN and PANU)
# modprobe bnep
# hcid
# sdpd
on the GN side
# pand --listen --role GN
on the PANU side
# pand --connect <GN address>
after this command, I get the following messages using dmesg
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
FIFO write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
FIFO write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
FIFO write timed out
parport0: FIFO is stuck
parport0: BUSY timeout (1) in compat_write_block_pio
FIFO write timed out
and I can not find the bnep0 network interface.
am I doing something wrong?
any help is very welcome
cheers,
--
Anderson Clayton B. Rodrigues
Eng. de Software
Instituto Nokia de Tecnologia - INdT
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users