Good Afternon :
First sorry by my english is very poor i've a question about to configure a
pcmcia card Zoom 4312 Bluetooth i see in your web a description about card
information structure of the zoom bluetooth card. i installed ubuntu hoary
rc in my laptop (Toshiba 1700-200) and i can not use the multysinc to pairy
my SE Phone with the laptop with cardctrl ident i obtaint the next
information:
product info : "PCMCIA", "Bluetoothcard","",""
manfid: 0x0279, 0x950b
function : 2 (serial)
i never configure a pcmcia card somebody can help me
Thanks in advance
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
hi.. well the way i did it.. was to make an init script like like in
my previous email (except you might want to remove that last line)
then put it in /etc/init.d
finally go into /etc/rc5.d and put a symlink to your script
you should probably start with S99 (make sure the name isn't the same
as something htere).. and make sure it's after loading of bluetooth..
hope that helps.
dGV
On Apr 8, 2005 5:52 AM, Cesar Diaz <[email protected]> wrote:
> With the device bcsp and the standard ubuntu packages work fine.
>
> but now i have another problem when reboot the machine i must write manually
> it to work again
>
> how i can automatize the load of module in the init
>
> many thanks by the help
>
> >From: Erwin Authried <[email protected]>
> >Reply-To: [email protected]
> >To: "[email protected]" <[email protected]>
> >Subject: Re: [Bluez-users] Configure PCMCIA Zoom Bluetooth
> >Date: Thu, 07 Apr 2005 19:50:38 +0200
> >
> >Am Don, den 07.04.2005 schrieb Cesar Diaz um 19:38:
> > > Sorry but i write it correctly in my computer and the bluez-utils are
> >the
> > > last from ubuntu repositories
> > > and continue with the same error "unkwon type or id"
> > >
> >you should try
> > hciattach <dev> bcsp
> >
> >if "zoom" isn't available.
> >
> >Regards,
> >Erwin
> >
> >
> >
> >
> >-------------------------------------------------------
> >SF email is sponsored by - The IT Product Guide
> >Read honest & candid reviews on hundreds of IT Products from real users.
> >Discover which products truly live up to the hype. Start reading now.
> >http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> >_______________________________________________
> >Bluez-users mailing list
> >[email protected]
> >https://lists.sourceforge.net/lists/listinfo/bluez-users
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
With the device bcsp and the standard ubuntu packages work fine.
but now i have another problem when reboot the machine i must write manually
it to work again
how i can automatize the load of module in the init
many thanks by the help
>From: Erwin Authried <[email protected]>
>Reply-To: [email protected]
>To: "[email protected]" <[email protected]>
>Subject: Re: [Bluez-users] Configure PCMCIA Zoom Bluetooth
>Date: Thu, 07 Apr 2005 19:50:38 +0200
>
>Am Don, den 07.04.2005 schrieb Cesar Diaz um 19:38:
> > Sorry but i write it correctly in my computer and the bluez-utils are
>the
> > last from ubuntu repositories
> > and continue with the same error "unkwon type or id"
> >
>you should try
> hciattach <dev> bcsp
>
>if "zoom" isn't available.
>
>Regards,
>Erwin
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.
>http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>_______________________________________________
>Bluez-users mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Many thanks, the problem is the ubuntu packages i deinstalled it and
download the tars from bluez and compile it ans now work ok
>From: Marcel Holtmann <[email protected]>
>Reply-To: [email protected]
>To: BlueZ Mailing List <[email protected]>
>Subject: Re: [Bluez-users] Configure PCMCIA Zoom Bluetooth
>Date: Thu, 07 Apr 2005 19:26:27 +0200
>
>Hi Cesar,
>
> > with dmesg i see a new ttyS14 but when i write "hciattach ttys14 zoom"
>i
> > received the next message :
> >
> > unkwon device type or id
>
>then update your bluez-utils and it is ttyS14 and not ttys14.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.
>http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>_______________________________________________
>Bluez-users mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Am Don, den 07.04.2005 schrieb Cesar Diaz um 19:38:
> Sorry but i write it correctly in my computer and the bluez-utils are the
> last from ubuntu repositories
> and continue with the same error "unkwon type or id"
>
you should try
hciattach <dev> bcsp
if "zoom" isn't available.
Regards,
Erwin
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Cesar,
> Sorry but i write it correctly in my computer and the bluez-utils are the
> last from ubuntu repositories
> and continue with the same error "unkwon type or id"
then try "hciattach ttyS14 bcsp 115200" or check the manual page for
other possible options. Or compile bluez-utils from the source.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Sorry but i write it correctly in my computer and the bluez-utils are the
last from ubuntu repositories
and continue with the same error "unkwon type or id"
Thanks
>From: Marcel Holtmann <[email protected]>
>Reply-To: [email protected]
>To: BlueZ Mailing List <[email protected]>
>Subject: Re: [Bluez-users] Configure PCMCIA Zoom Bluetooth
>Date: Thu, 07 Apr 2005 19:26:27 +0200
>
>Hi Cesar,
>
> > with dmesg i see a new ttyS14 but when i write "hciattach ttys14 zoom"
>i
> > received the next message :
> >
> > unkwon device type or id
>
>then update your bluez-utils and it is ttyS14 and not ttys14.
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.
>http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>_______________________________________________
>Bluez-users mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi David,
> this is how i connected my billionton card (same way with the zoom i
> bought and returned after i figurd out how to get my card working)
>
> well that's my script at startup that doesn' twork actually :) but
> the commands in line work.. the attach is for your ttys device once u
> figure it out from dmesg.. then run the hcid, an hciconfig to see if
> it's running.. then you can run hidd --connect and the mac of the
> device..
>
> hey marcel i have a question.. it seems everytime i run my connect
> thing.. ineed to have my mouse in the pairing mode (solid light.. like
> when i pair it with windows) is there a way to just have the mouse
> connect without paring it everytime i reboot hte machine. ?
>
>
> anyway i hope this helps anybody else that has a billionton card..
> good work with the drivers..
>
> #!/bin/sh
>
> hciattach ttyS14 bcsp 921600
> hcid
> hciconfig
>
> hidd --server
>
> hidd --connect 00:0E:A1:03:09:AC
the connect is needed only once. After that the mouse will reconnect by
itself if needed.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Cesar,
> with dmesg i see a new ttyS14 but when i write "hciattach ttys14 zoom" i
> received the next message :
>
> unkwon device type or id
then update your bluez-utils and it is ttyS14 and not ttys14.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
with dmesg i see a new ttyS14 but when i write "hciattach ttys14 zoom" i
received the next message :
unkwon device type or id
thanks
>From: Marcel Holtmann <[email protected]>
>Reply-To: [email protected]
>To: BlueZ Mailing List <[email protected]>
>Subject: Re: [Bluez-users] Configure PCMCIA Zoom Bluetooth
>Date: Thu, 07 Apr 2005 18:37:21 +0200
>
>Hi Cesar,
>
> > First sorry by my english is very poor i've a question about to
>configure a
> > pcmcia card Zoom 4312 Bluetooth i see in your web a description about
>card
> > information structure of the zoom bluetooth card. i installed ubuntu
>hoary
> > rc in my laptop (Toshiba 1700-200) and i can not use the multysinc to
>pairy
> > my SE Phone with the laptop with cardctrl ident i obtaint the next
> > information:
> >
> > product info : "PCMCIA", "Bluetoothcard","",""
> > manfid: 0x0279, 0x950b
> > function : 2 (serial)
>
>check with "dmesg" for a new ttyS device after you put in that card and
>then call "hciattach <dev> zoom".
>
>Regards
>
>Marcel
>
>
>
>
>-------------------------------------------------------
>SF email is sponsored by - The IT Product Guide
>Read honest & candid reviews on hundreds of IT Products from real users.
>Discover which products truly live up to the hype. Start reading now.
>http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
>_______________________________________________
>Bluez-users mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
this is how i connected my billionton card (same way with the zoom i
bought and returned after i figurd out how to get my card working)
well that's my script at startup that doesn' twork actually :) but
the commands in line work.. the attach is for your ttys device once u
figure it out from dmesg.. then run the hcid, an hciconfig to see if
it's running.. then you can run hidd --connect and the mac of the
device..
hey marcel i have a question.. it seems everytime i run my connect
thing.. ineed to have my mouse in the pairing mode (solid light.. like
when i pair it with windows) is there a way to just have the mouse
connect without paring it everytime i reboot hte machine. ?
anyway i hope this helps anybody else that has a billionton card..
good work with the drivers..
#!/bin/sh
hciattach ttyS14 bcsp 921600
hcid
hciconfig
hidd --server
hidd --connect 00:0E:A1:03:09:AC
On Apr 7, 2005 12:37 PM, Marcel Holtmann <[email protected]> wrote:
> Hi Cesar,
>
> > First sorry by my english is very poor i've a question about to configure a
> > pcmcia card Zoom 4312 Bluetooth i see in your web a description about card
> > information structure of the zoom bluetooth card. i installed ubuntu hoary
> > rc in my laptop (Toshiba 1700-200) and i can not use the multysinc to pairy
> > my SE Phone with the laptop with cardctrl ident i obtaint the next
> > information:
> >
> > product info : "PCMCIA", "Bluetoothcard","",""
> > manfid: 0x0279, 0x950b
> > function : 2 (serial)
>
> check with "dmesg" for a new ttyS device after you put in that card and
> then call "hciattach <dev> zoom".
>
> Regards
>
> Marcel
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Cesar,
> First sorry by my english is very poor i've a question about to configure a
> pcmcia card Zoom 4312 Bluetooth i see in your web a description about card
> information structure of the zoom bluetooth card. i installed ubuntu hoary
> rc in my laptop (Toshiba 1700-200) and i can not use the multysinc to pairy
> my SE Phone with the laptop with cardctrl ident i obtaint the next
> information:
>
> product info : "PCMCIA", "Bluetoothcard","",""
> manfid: 0x0279, 0x950b
> function : 2 (serial)
check with "dmesg" for a new ttyS device after you put in that card and
then call "hciattach <dev> zoom".
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users