Hello,
A few algorithms are failing ?alg self tests' during kernel boot into FIPS
mode (fips=1), causing a kernel panic (see below). I am using vanilla
kernel-4.7 source for these tests.
These messages were from individual boots into FIPS mode, where algorithms
are taken out from ".fips_allowed=1? and compiled.
Following (see below) is a patch to disable tests for some of these
algorithms work and kernel could boot into FIPS mode (fips=1)
successfully. Please Let me know if there is a deeper/lower-level fix to
this.
##
[ 1.270663] alg: hash: Failed to load transform for cmac(aes): -2
[ 1.271471] Kernel panic - not syncing: cmac(aes): cmac(aes) alg self
test failed in fips mode!
[ 1.256148] alg: hash: Failed to load transform for cmac(des3_ede): -2
[ 1.257005] Kernel panic - not syncing: cmac(des3_ede): cmac(des3_ede)
alg self test failed in fips mode!
[ 1.257005]
[ 1.427856] alg: aead: Failed to load transform for
authenc(hmac(sha1),cbc(des3_ede)): -2
[ 1.429036] Kernel panic - not syncing:
authenc(hmac(sha1),cbc(des3_ede)): authenc(hmac(sha1),cbc(des3_ede)) alg
self test failed in fips mode!
[ 1.429036]
[ 1.316830] alg: aead: Failed to load transform for
authenc(hmac(sha224),cbc(des3_ede)): -2
[ 1.317914] Kernel panic - not syncing:
authenc(hmac(sha224),cbc(des3_ede)): authenc(hmac(sha224),cbc(des3_ede))
alg self test failed in fips mode!
[ 1.317914]
[ 1.262950] alg: aead: Failed to load transform for
authenc(hmac(sha256),cbc(des3_ede)): -2
[ 1.264094] Kernel panic - not syncing:
authenc(hmac(sha256),cbc(des3_ede)): authenc(hmac(sha256),cbc(des3_ede))
alg self test failed in fips mode!
[ 1.264094]
##
#??PATCH??
--- a/crypto/testmgr.c 2016-08-11 14:06:15.925140405 -0500
+++ b/crypto/testmgr.c 2016-08-11 15:42:13.954317991 -0500
@@ -2079,7 +2079,6 @@
}, {
.alg = "authenc(hmac(sha1),cbc(des3_ede))",
.test = alg_test_aead,
- .fips_allowed = 1,
.suite = {
.aead = {
.enc = {
@@ -2133,7 +2132,6 @@
}, {
.alg = "authenc(hmac(sha224),cbc(des3_ede))",
.test = alg_test_aead,
- .fips_allowed = 1,
.suite = {
.aead = {
.enc = {
@@ -2174,7 +2172,6 @@
}, {
.alg = "authenc(hmac(sha256),cbc(des3_ede))",
.test = alg_test_aead,
- .fips_allowed = 1,
.suite = {
.aead = {
.enc = {
@@ -2209,7 +2206,6 @@
}, {
.alg = "authenc(hmac(sha384),cbc(des3_ede))",
.test = alg_test_aead,
- .fips_allowed = 1,
.suite = {
.aead = {
.enc = {
@@ -2258,7 +2254,6 @@
}, {
.alg = "authenc(hmac(sha512),cbc(des3_ede))",
.test = alg_test_aead,
- .fips_allowed = 1,
.suite = {
.aead = {
.enc = {
@@ -2386,7 +2381,6 @@
}, {
.alg = "cbc(des3_ede)",
.test = alg_test_skcipher,
- .fips_allowed = 1,
.suite = {
.cipher = {
.enc = {
@@ -2462,7 +2456,6 @@
}
}, {
.alg = "cmac(aes)",
- .fips_allowed = 1,
.test = alg_test_hash,
.suite = {
.hash = {
@@ -2472,7 +2465,6 @@
}
}, {
.alg = "cmac(des3_ede)",
- .fips_allowed = 1,
.test = alg_test_hash,
.suite = {
.hash = {
@@ -3753,7 +3745,6 @@
}, {
.alg = "xts(aes)",
.test = alg_test_skcipher,
- .fips_allowed = 1,
.suite = {
.cipher = {
.enc = {
________________________________
This transmission may contain information that is privileged, confidential, and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is strictly prohibited. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format.
Am Donnerstag, 11. August 2016, 21:55:05 CEST schrieb Tapas Sarangi:
Hi Tapas,
> Hello,
>
> A few algorithms are failing Œalg self tests' during kernel boot into FIPS
> mode (fips=1), causing a kernel panic (see below). I am using vanilla
> kernel-4.7 source for these tests.
>
> These messages were from individual boots into FIPS mode, where algorithms
> are taken out from ".fips_allowed=1² and compiled.
>
> Following (see below) is a patch to disable tests for some of these
> algorithms work and kernel could boot into FIPS mode (fips=1)
> successfully. Please Let me know if there is a deeper/lower-level fix to
> this.
Can you please send me (not the list) your .config file? I am not really sure
what is going on as I cannot reproduce it. I use the fips mode during my tests
and I use cmac or XTS and yet they do not cause an issue.
Thanks.
Ciao
Stephan