2018-04-17 17:49:13

by Geert Uytterhoeven

[permalink] [raw]
Subject: [PATCH v3 13/20] mmc: Remove depends on HAS_DMA in case of platform dependency

Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
In most cases this other symbol is an architecture or platform specific
symbol, or PCI.

Generic symbols and drivers without platform dependencies keep their
dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
cannot work anyway.

This simplifies the dependencies, and allows to improve compile-testing.

Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Acked-by: Robin Murphy <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
---
v3:
- Add Acked-by,
- Rebase to v4.17-rc1,

v2:
- Add Reviewed-by, Acked-by,
- Drop RFC state,
- Split per subsystem.
---
drivers/mmc/host/Kconfig | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9589f9c9046f14b1..3978d0418958bf6b 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -358,7 +358,6 @@ config MMC_MESON_MX_SDIO
tristate "Amlogic Meson6/Meson8/Meson8b SD/MMC Host Controller support"
depends on ARCH_MESON || COMPILE_TEST
depends on COMMON_CLK
- depends on HAS_DMA
depends on OF
help
This selects support for the SD/MMC Host Controller on
@@ -401,7 +400,6 @@ config MMC_OMAP

config MMC_OMAP_HS
tristate "TI OMAP High Speed Multimedia Card Interface support"
- depends on HAS_DMA
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
help
This selects the TI OMAP High Speed Multimedia card Interface.
@@ -511,7 +509,6 @@ config MMC_DAVINCI

config MMC_GOLDFISH
tristate "goldfish qemu Multimedia Card Interface support"
- depends on HAS_DMA
depends on GOLDFISH || COMPILE_TEST
help
This selects the Goldfish Multimedia card Interface emulation
@@ -605,7 +602,7 @@ config MMC_SDHI

config MMC_SDHI_SYS_DMAC
tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
- depends on MMC_SDHI && HAS_DMA
+ depends on MMC_SDHI
default MMC_SDHI if (SUPERH || ARM)
help
This provides DMA support for SDHI SD/SDIO controllers
@@ -615,7 +612,7 @@ config MMC_SDHI_SYS_DMAC
config MMC_SDHI_INTERNAL_DMAC
tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
depends on ARM64 || COMPILE_TEST
- depends on MMC_SDHI && HAS_DMA
+ depends on MMC_SDHI
default MMC_SDHI if ARM64
help
This provides DMA support for SDHI SD/SDIO controllers
@@ -669,7 +666,6 @@ config MMC_CAVIUM_THUNDERX

config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
- depends on HAS_DMA
depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
@@ -748,7 +744,6 @@ config MMC_DW_ZX

config MMC_SH_MMCIF
tristate "SuperH Internal MMCIF support"
- depends on HAS_DMA
depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
help
This selects the MMC Host Interface controller (MMCIF) found in various
@@ -868,7 +863,6 @@ config MMC_TOSHIBA_PCI
config MMC_BCM2835
tristate "Broadcom BCM2835 SDHOST MMC Controller support"
depends on ARCH_BCM2835 || COMPILE_TEST
- depends on HAS_DMA
help
This selects the BCM2835 SDHOST MMC controller. If you have
a BCM2835 platform with SD or MMC devices, say Y or M here.
--
2.7.4


2018-04-19 13:17:53

by Ulf Hansson

[permalink] [raw]
Subject: Re: [PATCH v3 13/20] mmc: Remove depends on HAS_DMA in case of platform dependency

On 17 April 2018 at 19:49, Geert Uytterhoeven <[email protected]> wrote:
> Remove dependencies on HAS_DMA where a Kconfig symbol depends on another
> symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST".
> In most cases this other symbol is an architecture or platform specific
> symbol, or PCI.
>
> Generic symbols and drivers without platform dependencies keep their
> dependencies on HAS_DMA, to prevent compiling subsystems or drivers that
> cannot work anyway.
>
> This simplifies the dependencies, and allows to improve compile-testing.
>
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> Reviewed-by: Mark Brown <[email protected]>
> Acked-by: Robin Murphy <[email protected]>
> Acked-by: Ulf Hansson <[email protected]>

Thanks, applied for next!

Kind regrds
Uffe

> ---
> v3:
> - Add Acked-by,
> - Rebase to v4.17-rc1,
>
> v2:
> - Add Reviewed-by, Acked-by,
> - Drop RFC state,
> - Split per subsystem.
> ---
> drivers/mmc/host/Kconfig | 10 ++--------
> 1 file changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 9589f9c9046f14b1..3978d0418958bf6b 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -358,7 +358,6 @@ config MMC_MESON_MX_SDIO
> tristate "Amlogic Meson6/Meson8/Meson8b SD/MMC Host Controller support"
> depends on ARCH_MESON || COMPILE_TEST
> depends on COMMON_CLK
> - depends on HAS_DMA
> depends on OF
> help
> This selects support for the SD/MMC Host Controller on
> @@ -401,7 +400,6 @@ config MMC_OMAP
>
> config MMC_OMAP_HS
> tristate "TI OMAP High Speed Multimedia Card Interface support"
> - depends on HAS_DMA
> depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
> help
> This selects the TI OMAP High Speed Multimedia card Interface.
> @@ -511,7 +509,6 @@ config MMC_DAVINCI
>
> config MMC_GOLDFISH
> tristate "goldfish qemu Multimedia Card Interface support"
> - depends on HAS_DMA
> depends on GOLDFISH || COMPILE_TEST
> help
> This selects the Goldfish Multimedia card Interface emulation
> @@ -605,7 +602,7 @@ config MMC_SDHI
>
> config MMC_SDHI_SYS_DMAC
> tristate "DMA for SDHI SD/SDIO controllers using SYS-DMAC"
> - depends on MMC_SDHI && HAS_DMA
> + depends on MMC_SDHI
> default MMC_SDHI if (SUPERH || ARM)
> help
> This provides DMA support for SDHI SD/SDIO controllers
> @@ -615,7 +612,7 @@ config MMC_SDHI_SYS_DMAC
> config MMC_SDHI_INTERNAL_DMAC
> tristate "DMA for SDHI SD/SDIO controllers using on-chip bus mastering"
> depends on ARM64 || COMPILE_TEST
> - depends on MMC_SDHI && HAS_DMA
> + depends on MMC_SDHI
> default MMC_SDHI if ARM64
> help
> This provides DMA support for SDHI SD/SDIO controllers
> @@ -669,7 +666,6 @@ config MMC_CAVIUM_THUNDERX
>
> config MMC_DW
> tristate "Synopsys DesignWare Memory Card Interface"
> - depends on HAS_DMA
> depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
> help
> This selects support for the Synopsys DesignWare Mobile Storage IP
> @@ -748,7 +744,6 @@ config MMC_DW_ZX
>
> config MMC_SH_MMCIF
> tristate "SuperH Internal MMCIF support"
> - depends on HAS_DMA
> depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
> help
> This selects the MMC Host Interface controller (MMCIF) found in various
> @@ -868,7 +863,6 @@ config MMC_TOSHIBA_PCI
> config MMC_BCM2835
> tristate "Broadcom BCM2835 SDHOST MMC Controller support"
> depends on ARCH_BCM2835 || COMPILE_TEST
> - depends on HAS_DMA
> help
> This selects the BCM2835 SDHOST MMC controller. If you have
> a BCM2835 platform with SD or MMC devices, say Y or M here.
> --
> 2.7.4
>