From: Sunil Goutham <[email protected]>
CN10K series of silicons support true random number
generators. This patch adds support for the same. Also
supports entropy health status checking.
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: Bharat Bhushan <[email protected]>
Signed-off-by: Joseph Longever <[email protected]>
---
v1 -> v2:
Fixed warnings reported by kernel test robot.
Also modified TRNG read logix to address an issue where TRNG_STATUS
read from HW could be incorrect.
---
drivers/char/hw_random/Kconfig | 11 +++
drivers/char/hw_random/Makefile | 1 +
drivers/char/hw_random/cn10k-rng.c | 181 +++++++++++++++++++++++++++++++++++++
3 files changed, 193 insertions(+)
create mode 100644 drivers/char/hw_random/cn10k-rng.c
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 1da6477..001b819 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -538,6 +538,17 @@ config HW_RANDOM_ARM_SMCCC_TRNG
To compile this driver as a module, choose M here: the
module will be called arm_smccc_trng.
+config HW_RANDOM_CN10K
+ tristate "Marvell CN10K Random Number Generator support"
+ depends on HW_RANDOM && PCI && ARM64
+ default HW_RANDOM
+ help
+ This driver provides support for the True Random Number
+ generator available in Marvell CN10K SoCs.
+
+ To compile this driver as a module, choose M here.
+ The module will be called cn10k_rng. If unsure, say Y.
+
endif # HW_RANDOM
config UML_RANDOM
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index a5a1c76..a2f1ce0 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_HW_RANDOM_NPCM) += npcm-rng.o
obj-$(CONFIG_HW_RANDOM_CCTRNG) += cctrng.o
obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphera-trng.o
obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
+obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
diff --git a/drivers/char/hw_random/cn10k-rng.c b/drivers/char/hw_random/cn10k-rng.c
new file mode 100644
index 0000000..35001c6
--- /dev/null
+++ b/drivers/char/hw_random/cn10k-rng.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Marvell CN10K RVU Hardware Random Number Generator.
+ *
+ * Copyright (C) 2021 Marvell.
+ *
+ */
+
+#include <linux/hw_random.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+
+#include <linux/arm-smccc.h>
+
+/* CSRs */
+#define RNM_CTL_STATUS 0x000
+#define RNM_ENTROPY_STATUS 0x008
+#define RNM_CONST 0x030
+#define RNM_EBG_ENT 0x048
+#define RNM_PF_EBG_HEALTH 0x050
+#define RNM_PF_RANDOM 0x400
+#define RNM_TRNG_RESULT 0x408
+
+struct cn10k_rng {
+ void __iomem *reg_base;
+ struct hwrng ops;
+ struct pci_dev *pdev;
+};
+
+#define PLAT_OCTEONTX_RESET_RNG_EBG_HEALTH_STATE 0xc2000b0f
+
+static int reset_rng_health_state(struct cn10k_rng *rng)
+{
+ struct arm_smccc_res res;
+
+ /* Send SMC service call to reset EBG health state */
+ arm_smccc_smc(PLAT_OCTEONTX_RESET_RNG_EBG_HEALTH_STATE, 0, 0, 0, 0, 0, 0, 0, &res);
+ if (res.a0 != 0UL)
+ return -EIO;
+
+ return 0;
+}
+
+static int check_rng_health(struct cn10k_rng *rng)
+{
+ u64 status;
+ int err;
+
+ /* Skip checking health */
+ if (!rng->reg_base)
+ return 0;
+
+ status = readq(rng->reg_base + RNM_PF_EBG_HEALTH);
+ if (status & BIT_ULL(20)) {
+ err = reset_rng_health_state(rng);
+ if (err) {
+ dev_err(&rng->pdev->dev, "HWRNG: Health test failed (status=%llx)\n",
+ status);
+ dev_err(&rng->pdev->dev, "HWRNG: error during reset\n");
+ }
+ }
+ return 0;
+}
+
+static void cn10k_read_trng(struct cn10k_rng *rng, u64 *value)
+{
+ u64 upper, lower;
+
+ *value = readq(rng->reg_base + RNM_PF_RANDOM);
+
+ /* HW can run out of entropy if large amount random data is read in
+ * quick succession. Zeros may not be real random data from HW.
+ */
+ if (!*value) {
+ upper = readq(rng->reg_base + RNM_PF_RANDOM);
+ lower = readq(rng->reg_base + RNM_PF_RANDOM);
+ while (!(upper & 0x00000000FFFFFFFFULL))
+ upper = readq(rng->reg_base + RNM_PF_RANDOM);
+ while (!(lower & 0xFFFFFFFF00000000ULL))
+ lower = readq(rng->reg_base + RNM_PF_RANDOM);
+
+ *value = (upper & 0xFFFFFFFF00000000) | (lower & 0xFFFFFFFF);
+ }
+}
+
+static int cn10k_rng_read(struct hwrng *hwrng, void *data,
+ size_t max, bool wait)
+{
+ struct cn10k_rng *rng = (struct cn10k_rng *)hwrng->priv;
+ unsigned int size;
+ int err = 0;
+ u64 value;
+
+ err = check_rng_health(rng);
+ if (err)
+ return err;
+
+ size = max;
+
+ while (size >= 8) {
+ cn10k_read_trng(rng, &value);
+
+ *((u64 *)data) = (u64)value;
+ size -= 8;
+ data += 8;
+ }
+
+ while (size > 0) {
+ cn10k_read_trng(rng, &value);
+
+ *((u8 *)data) = (u8)value;
+ size--;
+ data++;
+ }
+
+ return max - size;
+}
+
+static int cn10k_rng_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct cn10k_rng *rng;
+ int err;
+
+ rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL);
+ if (!rng)
+ return -ENOMEM;
+
+ rng->pdev = pdev;
+ pci_set_drvdata(pdev, rng);
+
+ rng->reg_base = pcim_iomap(pdev, 0, 0);
+ if (!rng->reg_base) {
+ dev_err(&pdev->dev, "Error while mapping CSRs, exiting\n");
+ return -ENOMEM;
+ }
+
+ rng->ops.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "cn10k-rng-%s", dev_name(&pdev->dev));
+ if (!rng->ops.name)
+ return -ENOMEM;
+
+ rng->ops.read = cn10k_rng_read;
+ rng->ops.quality = 1000;
+ rng->ops.priv = (unsigned long)rng;
+
+ reset_rng_health_state(rng);
+
+ err = devm_hwrng_register(&pdev->dev, &rng->ops);
+ if (err) {
+ dev_err(&pdev->dev, "Could not register hwrng device.\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static void cn10k_rng_remove(struct pci_dev *pdev)
+{
+ /* Nothing to do */
+}
+
+static const struct pci_device_id cn10k_rng_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, 0xA098) }, /* RNG PF */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, cn10k_rng_id_table);
+
+static struct pci_driver cn10k_rng_driver = {
+ .name = "cn10k_rng",
+ .id_table = cn10k_rng_id_table,
+ .probe = cn10k_rng_probe,
+ .remove = cn10k_rng_remove,
+};
+
+module_pci_driver(cn10k_rng_driver);
+MODULE_AUTHOR("Sunil Goutham <[email protected]>");
+MODULE_DESCRIPTION("Marvell CN10K HW RNG Driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
On Tue, Dec 14, 2021 at 04:21:08PM +0530, [email protected] wrote:
> From: Sunil Goutham <[email protected]>
>
> CN10K series of silicons support true random number
> generators. This patch adds support for the same. Also
> supports entropy health status checking.
>
> Signed-off-by: Sunil Goutham <[email protected]>
> Signed-off-by: Bharat Bhushan <[email protected]>
> Signed-off-by: Joseph Longever <[email protected]>
> ---
> v1 -> v2:
> Fixed warnings reported by kernel test robot.
> Also modified TRNG read logix to address an issue where TRNG_STATUS
> read from HW could be incorrect.
> ---
> drivers/char/hw_random/Kconfig | 11 +++
> drivers/char/hw_random/Makefile | 1 +
> drivers/char/hw_random/cn10k-rng.c | 181 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 193 insertions(+)
> create mode 100644 drivers/char/hw_random/cn10k-rng.c
Patch applied. Thanks.
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt