Add DT bindings documentation for the crypto driver
Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/[email protected]>
---
.../devicetree/bindings/crypto/mediatek-crypto.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
diff --git a/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
new file mode 100644
index 0000000..c204725
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
@@ -0,0 +1,27 @@
+MediaTek cryptographic accelerators
+
+Required properties:
+- compatible: Should be "mediatek,eip97-crypto"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain the five crypto engines interrupts in numeric
+ order. These are global system and four descriptor rings.
+- clocks: the clock used by the core
+- clock-names: the names of the clock listed in the clocks property. These are
+ "ethif", "cryp"
+- power-domains: Must contain a reference to the PM domain.
+
+
+Example:
+ crypto: crypto@1b240000 {
+ compatible = "mediatek,eip97-crypto";
+ reg = <0 0x1b240000 0 0x20000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
+ <ðsys CLK_ETHSYS_CRYPTO>;
+ clock-names = "ethif","cryp";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
+ };
--
1.9.1
On Mon, Dec 19, 2016 at 10:20:45AM +0800, Ryder Lee wrote:
> Add DT bindings documentation for the crypto driver
>
> Signed-off-by: Ryder Lee <ryder.lee-NuS5LvNUpcJWk0Htik3J/[email protected]>
> ---
> .../devicetree/bindings/crypto/mediatek-crypto.txt | 27 ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/crypto/mediatek-crypto.txt
Acked-by: Rob Herring <[email protected]>