Add device tree binding for STM32F4.
Signed-off-by: Cosar Dindar <[email protected]>
---
Documentation/devicetree/bindings/crypto/st,stm32-crc.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
index 3ba92a5..7b30f1e 100644
--- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
+++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
@@ -1,7 +1,7 @@
* STMicroelectronics STM32 CRC
Required properties:
-- compatible: Should be "st,stm32f7-crc".
+- compatible: Can be either "st,stm32f7-crc" or "st,srm32f4-crc".
- reg: The address and length of the peripheral registers space
- clocks: The input clock of the CRC instance
@@ -10,7 +10,7 @@ Optional properties: none
Example:
crc: crc@40023000 {
- compatible = "st,stm32f7-crc";
+ compatible = "st,stm32f7-crc", "st,stm32f4-crc";
reg = <0x40023000 0x400>;
clocks = <&rcc 0 12>;
};
--
2.7.4
On Sat, May 20, 2017 at 04:32:12PM +0300, Cosar Dindar wrote:
> Add device tree binding for STM32F4.
>
> Signed-off-by: Cosar Dindar <[email protected]>
> ---
> Documentation/devicetree/bindings/crypto/st,stm32-crc.txt | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> index 3ba92a5..7b30f1e 100644
> --- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> +++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> @@ -1,7 +1,7 @@
> * STMicroelectronics STM32 CRC
>
> Required properties:
> -- compatible: Should be "st,stm32f7-crc".
> +- compatible: Can be either "st,stm32f7-crc" or "st,srm32f4-crc".
Here you say either, but the example has both.
> - reg: The address and length of the peripheral registers space
> - clocks: The input clock of the CRC instance
>
> @@ -10,7 +10,7 @@ Optional properties: none
> Example:
>
> crc: crc@40023000 {
> - compatible = "st,stm32f7-crc";
> + compatible = "st,stm32f7-crc", "st,stm32f4-crc";
> reg = <0x40023000 0x400>;
> clocks = <&rcc 0 12>;
> };
> --
> 2.7.4
>
On Tue, May 30, 2017 at 05:50:24PM -0500, Rob Herring wrote:
> On Sat, May 20, 2017 at 04:32:12PM +0300, Cosar Dindar wrote:
> > Add device tree binding for STM32F4.
> >
> > Signed-off-by: Cosar Dindar <[email protected]>
> > ---
> > Documentation/devicetree/bindings/crypto/st,stm32-crc.txt | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > index 3ba92a5..7b30f1e 100644
> > --- a/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > +++ b/Documentation/devicetree/bindings/crypto/st,stm32-crc.txt
> > @@ -1,7 +1,7 @@
> > * STMicroelectronics STM32 CRC
> >
> > Required properties:
> > -- compatible: Should be "st,stm32f7-crc".
> > +- compatible: Can be either "st,stm32f7-crc" or "st,srm32f4-crc".
>
> Here you say either, but the example has both.
>
Thanks for reviewing. Here it could be changed as :
Should be one of the following string
"st,stm32f7-crc"
"st,stm32f4-crc"
Also, example may not contain both binding strings, I think. It could be leaved unchanged
as in the previous version. I will make these changes with this way if it is OK.
> > - reg: The address and length of the peripheral registers space
> > - clocks: The input clock of the CRC instance
> >
> > @@ -10,7 +10,7 @@ Optional properties: none
> > Example:
> >
> > crc: crc@40023000 {
> > - compatible = "st,stm32f7-crc";
> > + compatible = "st,stm32f7-crc", "st,stm32f4-crc";
> > reg = <0x40023000 0x400>;
> > clocks = <&rcc 0 12>;
> > };
> > --
> > 2.7.4
> >