Hi
I am seeing the below errors after installing an Intel QAT card
and loading the upstreamed qat_dh895xcc and intel_qat modules.
Have others seen similar errors and know if this is a known issue
and a fix exists or know whats going on ? This is with 4.12.0-rc4+
version of the kernel.
Any help is sincerely appreciated.
thanks
--Raj
[ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
[ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
encryption for qat_aes_cbc
[ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
at page 0 for qat_aes_ctr
[ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
encryption for qat_aes_xts
[ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
[root@dhcp-swlab-681 ~]# dmesg | grep -i alg
[ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
(pkcs1pad(rsa-generic,sha256))
[ 2.562511] SELinux: Class alg_socket not defined in policy.
[ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
encryption for qat_aes_cbc
[ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
at page 0 for qat_aes_ctr
[ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
encryption for qat_aes_xts
[ 4.367682] alg: akcipher: encrypt test failed. Invalid output
[ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
[ 4.431827] alg: dh: generate public key test failed. Invalid output
[ 4.431829] alg: dh: test failed on vector 1, err=-22
83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
Subsystem: Intel Corporation Device 0000
Physical Slot: 2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 35
NUMA node: 1
Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
Vector table: BAR=2 offset=0003b000
PBA: BAR=2 offset=0003b800
Capabilities: [6c] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [74] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 256 bytes, MaxReadReq 1024 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
<512ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
IOVCap: Migration-, Interrupt Message Number: 000
IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
IOVSta: Migration-
Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
VF offset: 8, stride: 1, Device ID: 0443
Supported Page Size: 00000553, System Page Size: 00000001
Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
VF Migration: offset: 00000000, BIR: 0
Kernel driver in use: dh895xcc
Kernel modules: qat_dh895xcc
# lsmod | grep qat
qat_dh895xcc 16384 1
intel_qat 126976 13 qat_dh895xcc
dh_generic 16384 1 intel_qat
authenc 16384 1 intel_qat
# modinfo qat_dh895xcc
filename:
/lib/modules/4.12.0-rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
version: 0.6.0
description: Intel(R) QuickAssist Technology
firmware: qat_895xcc.bin
author: Intel
license: Dual BSD/GPL
srcversion: 37370A80B9807EC2308F493
alias: pci:v00008086d00000435sv*sd*bc*sc*i*
depends: intel_qat
intree: Y
vermagic: 4.12.0-rc4+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
Hi Raj,
I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
Are you seeing any of this with a previous kernel version? If not, git bisect might
help us finding the root-cause.
Have you tried with another platform/hw?
Regards,
Salvatore
> -----Original Message-----
> From: [email protected] [mailto:linux-crypto-
> [email protected]] On Behalf Of Raj Ammanur
> Sent: Friday, June 9, 2017 7:37 PM
> To: Linux Crypto Mailing List <[email protected]>
> Subject: Alg errors with Intel QAT Card
>
> Hi
>
> I am seeing the below errors after installing an Intel QAT card
> and loading the upstreamed qat_dh895xcc and intel_qat modules.
>
> Have others seen similar errors and know if this is a known issue
> and a fix exists or know whats going on ? This is with 4.12.0-rc4+
> version of the kernel.
>
> Any help is sincerely appreciated.
>
> thanks
> --Raj
>
>
> [ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
> [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> encryption for qat_aes_cbc
> [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> at page 0 for qat_aes_ctr
> [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> encryption for qat_aes_xts
> [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
> [ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
> (pkcs1pad(rsa-generic,sha256))
> [ 2.562511] SELinux: Class alg_socket not defined in policy.
> [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> encryption for qat_aes_cbc
> [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> at page 0 for qat_aes_ctr
> [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> encryption for qat_aes_xts
> [ 4.367682] alg: akcipher: encrypt test failed. Invalid output
> [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> [ 4.431827] alg: dh: generate public key test failed. Invalid output
> [ 4.431829] alg: dh: test failed on vector 1, err=-22
>
>
> 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
> Subsystem: Intel Corporation Device 0000
> Physical Slot: 2
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 35
> NUMA node: 1
> Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
> Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
> Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
> Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
> Vector table: BAR=2 offset=0003b000
> PBA: BAR=2 offset=0003b800
> Capabilities: [6c] Power Management version 3
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
> ,D3cold-)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [74] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
> ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
> MaxPayload 256 bytes, MaxReadReq 1024 bytes
> DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
> <512ns, L1 unlimited
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
> BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
> Supported
> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> Disabled
> AtomicOpsCtl: ReqEn-
> LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> EqualizationPhase1-
> EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
> ARICap: MFVC- ACS-, Next Function: 0
> ARICtl: MFVC- ACS-, Function Group: 0
> Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
> IOVCap: Migration-, Interrupt Message Number: 000
> IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
> IOVSta: Migration-
> Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
> VF offset: 8, stride: 1, Device ID: 0443
> Supported Page Size: 00000553, System Page Size: 00000001
> Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
> Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
> VF Migration: offset: 00000000, BIR: 0
> Kernel driver in use: dh895xcc
> Kernel modules: qat_dh895xcc
>
>
> # lsmod | grep qat
> qat_dh895xcc 16384 1
> intel_qat 126976 13 qat_dh895xcc
> dh_generic 16384 1 intel_qat
> authenc 16384 1 intel_qat
>
> # modinfo qat_dh895xcc
> filename:
> /lib/modules/4.12.0-
> rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
> version: 0.6.0
> description: Intel(R) QuickAssist Technology
> firmware: qat_895xcc.bin
> author: Intel
> license: Dual BSD/GPL
> srcversion: 37370A80B9807EC2308F493
> alias: pci:v00008086d00000435sv*sd*bc*sc*i*
> depends: intel_qat
> intree: Y
> vermagic: 4.12.0-rc4+ SMP mod_unload
> signat: PKCS#7
> signer:
> sig_key:
> sig_hashalgo: md4
On Mon, Jun 12, 2017 at 03:52:07PM +0000, Benedetto, Salvatore wrote:
> Hi Raj,
>
> I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
> Are you seeing any of this with a previous kernel version? If not, git bisect might
> help us finding the root-cause.
> Have you tried with another platform/hw?
>
> Regards,
> Salvatore
>
Try a soft reboot and see if the error clears up. This looks a bit reminscient
of some firmware errors we've been chasing down
Neil
> > -----Original Message-----
> > From: [email protected] [mailto:linux-crypto-
> > [email protected]] On Behalf Of Raj Ammanur
> > Sent: Friday, June 9, 2017 7:37 PM
> > To: Linux Crypto Mailing List <[email protected]>
> > Subject: Alg errors with Intel QAT Card
> >
> > Hi
> >
> > I am seeing the below errors after installing an Intel QAT card
> > and loading the upstreamed qat_dh895xcc and intel_qat modules.
> >
> > Have others seen similar errors and know if this is a known issue
> > and a fix exists or know whats going on ? This is with 4.12.0-rc4+
> > version of the kernel.
> >
> > Any help is sincerely appreciated.
> >
> > thanks
> > --Raj
> >
> >
> > [ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> > encryption for qat_aes_cbc
> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> > at page 0 for qat_aes_ctr
> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> > encryption for qat_aes_xts
> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> > [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
> > [ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
> > (pkcs1pad(rsa-generic,sha256))
> > [ 2.562511] SELinux: Class alg_socket not defined in policy.
> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> > encryption for qat_aes_cbc
> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> > at page 0 for qat_aes_ctr
> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> > encryption for qat_aes_xts
> > [ 4.367682] alg: akcipher: encrypt test failed. Invalid output
> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> > [ 4.431827] alg: dh: generate public key test failed. Invalid output
> > [ 4.431829] alg: dh: test failed on vector 1, err=-22
> >
> >
> > 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
> > Subsystem: Intel Corporation Device 0000
> > Physical Slot: 2
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR+ FastB2B- DisINTx+
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > Latency: 0, Cache Line Size: 32 bytes
> > Interrupt: pin A routed to IRQ 35
> > NUMA node: 1
> > Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
> > Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
> > Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
> > Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
> > Address: 0000000000000000 Data: 0000
> > Masking: 00000000 Pending: 00000000
> > Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
> > Vector table: BAR=2 offset=0003b000
> > PBA: BAR=2 offset=0003b800
> > Capabilities: [6c] Power Management version 3
> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
> > ,D3cold-)
> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > Capabilities: [74] Express (v2) Endpoint, MSI 00
> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
> > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
> > MaxPayload 256 bytes, MaxReadReq 1024 bytes
> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
> > <512ns, L1 unlimited
> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
> > BWMgmt- ABWMgmt-
> > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
> > Supported
> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> > Disabled
> > AtomicOpsCtl: ReqEn-
> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> > ComplianceSOS-
> > Compliance De-emphasis: -6dB
> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> > EqualizationPhase1-
> > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> > Capabilities: [100 v1] Advanced Error Reporting
> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > MalfTLP- ECRC- UnsupReq- ACSViol-
> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> > MalfTLP- ECRC- UnsupReq- ACSViol-
> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> > MalfTLP+ ECRC- UnsupReq- ACSViol-
> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> > Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
> > ARICap: MFVC- ACS-, Next Function: 0
> > ARICtl: MFVC- ACS-, Function Group: 0
> > Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
> > IOVCap: Migration-, Interrupt Message Number: 000
> > IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
> > IOVSta: Migration-
> > Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
> > VF offset: 8, stride: 1, Device ID: 0443
> > Supported Page Size: 00000553, System Page Size: 00000001
> > Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
> > Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
> > VF Migration: offset: 00000000, BIR: 0
> > Kernel driver in use: dh895xcc
> > Kernel modules: qat_dh895xcc
> >
> >
> > # lsmod | grep qat
> > qat_dh895xcc 16384 1
> > intel_qat 126976 13 qat_dh895xcc
> > dh_generic 16384 1 intel_qat
> > authenc 16384 1 intel_qat
> >
> > # modinfo qat_dh895xcc
> > filename:
> > /lib/modules/4.12.0-
> > rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
> > version: 0.6.0
> > description: Intel(R) QuickAssist Technology
> > firmware: qat_895xcc.bin
> > author: Intel
> > license: Dual BSD/GPL
> > srcversion: 37370A80B9807EC2308F493
> > alias: pci:v00008086d00000435sv*sd*bc*sc*i*
> > depends: intel_qat
> > intree: Y
> > vermagic: 4.12.0-rc4+ SMP mod_unload
> > signat: PKCS#7
> > signer:
> > sig_key:
> > sig_hashalgo: md4
Hi Neil & Salvatore,
thanks for the replies. The soft reboot hasn't helped. I am trying a previous
kernel version that works with a similar card that we installed in
another server
and that works fine. Will keep you posted.
Neil: have you found fix/workaround for the firmware errors or you just using
a soft reboot? by that, you just mean unload and load the kernel modules or
a system reboot. I have tried both.
thanks
--Raj
On Tue, Jun 13, 2017 at 5:30 AM, Neil Horman <[email protected]> wrote:
> On Mon, Jun 12, 2017 at 03:52:07PM +0000, Benedetto, Salvatore wrote:
>> Hi Raj,
>>
>> I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
>> Are you seeing any of this with a previous kernel version? If not, git bisect might
>> help us finding the root-cause.
>> Have you tried with another platform/hw?
>>
>> Regards,
>> Salvatore
>>
> Try a soft reboot and see if the error clears up. This looks a bit reminscient
> of some firmware errors we've been chasing down
> Neil
>
>> > -----Original Message-----
>> > From: [email protected] [mailto:linux-crypto-
>> > [email protected]] On Behalf Of Raj Ammanur
>> > Sent: Friday, June 9, 2017 7:37 PM
>> > To: Linux Crypto Mailing List <[email protected]>
>> > Subject: Alg errors with Intel QAT Card
>> >
>> > Hi
>> >
>> > I am seeing the below errors after installing an Intel QAT card
>> > and loading the upstreamed qat_dh895xcc and intel_qat modules.
>> >
>> > Have others seen similar errors and know if this is a known issue
>> > and a fix exists or know whats going on ? This is with 4.12.0-rc4+
>> > version of the kernel.
>> >
>> > Any help is sincerely appreciated.
>> >
>> > thanks
>> > --Raj
>> >
>> >
>> > [ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
>> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
>> > encryption for qat_aes_cbc
>> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
>> > at page 0 for qat_aes_ctr
>> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
>> > encryption for qat_aes_xts
>> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
>> > [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
>> > [ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
>> > (pkcs1pad(rsa-generic,sha256))
>> > [ 2.562511] SELinux: Class alg_socket not defined in policy.
>> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
>> > encryption for qat_aes_cbc
>> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
>> > at page 0 for qat_aes_ctr
>> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
>> > encryption for qat_aes_xts
>> > [ 4.367682] alg: akcipher: encrypt test failed. Invalid output
>> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
>> > [ 4.431827] alg: dh: generate public key test failed. Invalid output
>> > [ 4.431829] alg: dh: test failed on vector 1, err=-22
>> >
>> >
>> > 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
>> > Subsystem: Intel Corporation Device 0000
>> > Physical Slot: 2
>> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>> > Stepping- SERR+ FastB2B- DisINTx+
>> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> > <TAbort- <MAbort- >SERR- <PERR- INTx-
>> > Latency: 0, Cache Line Size: 32 bytes
>> > Interrupt: pin A routed to IRQ 35
>> > NUMA node: 1
>> > Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
>> > Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
>> > Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
>> > Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
>> > Address: 0000000000000000 Data: 0000
>> > Masking: 00000000 Pending: 00000000
>> > Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
>> > Vector table: BAR=2 offset=0003b000
>> > PBA: BAR=2 offset=0003b800
>> > Capabilities: [6c] Power Management version 3
>> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
>> > ,D3cold-)
>> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>> > Capabilities: [74] Express (v2) Endpoint, MSI 00
>> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
>> > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
>> > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>> > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
>> > MaxPayload 256 bytes, MaxReadReq 1024 bytes
>> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>> > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
>> > <512ns, L1 unlimited
>> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>> > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
>> > BWMgmt- ABWMgmt-
>> > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
>> > Supported
>> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
>> > Disabled
>> > AtomicOpsCtl: ReqEn-
>> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
>> > ComplianceSOS-
>> > Compliance De-emphasis: -6dB
>> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
>> > EqualizationPhase1-
>> > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>> > Capabilities: [100 v1] Advanced Error Reporting
>> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> > MalfTLP- ECRC- UnsupReq- ACSViol-
>> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>> > MalfTLP- ECRC- UnsupReq- ACSViol-
>> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
>> > MalfTLP+ ECRC- UnsupReq- ACSViol-
>> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>> > Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
>> > ARICap: MFVC- ACS-, Next Function: 0
>> > ARICtl: MFVC- ACS-, Function Group: 0
>> > Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
>> > IOVCap: Migration-, Interrupt Message Number: 000
>> > IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>> > IOVSta: Migration-
>> > Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
>> > VF offset: 8, stride: 1, Device ID: 0443
>> > Supported Page Size: 00000553, System Page Size: 00000001
>> > Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
>> > Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
>> > VF Migration: offset: 00000000, BIR: 0
>> > Kernel driver in use: dh895xcc
>> > Kernel modules: qat_dh895xcc
>> >
>> >
>> > # lsmod | grep qat
>> > qat_dh895xcc 16384 1
>> > intel_qat 126976 13 qat_dh895xcc
>> > dh_generic 16384 1 intel_qat
>> > authenc 16384 1 intel_qat
>> >
>> > # modinfo qat_dh895xcc
>> > filename:
>> > /lib/modules/4.12.0-
>> > rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
>> > version: 0.6.0
>> > description: Intel(R) QuickAssist Technology
>> > firmware: qat_895xcc.bin
>> > author: Intel
>> > license: Dual BSD/GPL
>> > srcversion: 37370A80B9807EC2308F493
>> > alias: pci:v00008086d00000435sv*sd*bc*sc*i*
>> > depends: intel_qat
>> > intree: Y
>> > vermagic: 4.12.0-rc4+ SMP mod_unload
>> > signat: PKCS#7
>> > signer:
>> > sig_key:
>> > sig_hashalgo: md4
those previous alg error msgs are gone with 4.11.3-202.fc25.x86_64,
but now I see
multiple tracebacks like the ones below.
Looks like its been reported a few months back with 4.10.0-rc3+ , but
with no response
or further update:
https://www.spinics.net/lists/linux-crypto/msg23699.html
[ 182.697358] WARNING: CPU: 6 PID: 558 at crypto/algapi.c:348
crypto_wait_for_test+0x60/0x80
[ 182.699505] Modules linked in: ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat
ebtable_broute bridge st
p llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_raw ip6table_mangle ip6table_security iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_raw
iptable_mangle iptable_security ebtable_filter ebtables
ip6table_filter
ip6_tables crct10dif_pclmul ppdev qat_dh895xcc(+) crc32_pclmul
intel_qat ghash_clmulni_intel joydev parport_pc parport acpi_cpufreq
tpm_tis t
pm_tis_core tpm virtio_balloon qemu_fw_cfg i2c_piix4 dh_generic
authenc nfsd auth_rpcgss nfs_acl lockd grace sunrpc virtio_net
virtio_blk cir
rus drm_kms_helper ttm crc32c_intel drm serio_raw virtio_pci ixgbevf
virtio_ring virtio ata_generic pata_acpi
[ 182.705805] CPU: 6 PID: 558 Comm: systemd-udevd Not tainted
4.11.3-202.fc25.x86_64 #1
[ 182.706502] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.9.1-1.fc24 04/01/2014
[ 182.707269] Call Trace:
[ 182.707513] dump_stack+0x63/0x86
[ 182.707825] __warn+0xcb/0xf0
[ 182.708098] warn_slowpath_null+0x1d/0x20
[ 182.708463] crypto_wait_for_test+0x60/0x80
[ 182.708842] crypto_register_alg+0x5b/0x70
[ 182.709208] crypto_register_algs+0x3a/0x80
[ 182.709599] qat_algs_register+0x6c/0xc0 [intel_qat]
[ 182.710041] adf_dev_start+0xd1/0x160 [intel_qat]
[ 182.710477] adf_probe+0x5ec/0x610 [qat_dh895xcc]
[ 182.710909] local_pci_probe+0x45/0xa0
[ 182.711250] pci_device_probe+0xfa/0x150
[ 182.711623] driver_probe_device+0x2bb/0x460
[ 182.712009] __driver_attach+0xdf/0xf0
[ 182.712349] ? driver_probe_device+0x460/0x460
[ 182.712751] bus_for_each_dev+0x6c/0xc0
[ 182.713099] driver_attach+0x1e/0x20
[ 182.713426] bus_add_driver+0x170/0x270
[ 182.713773] driver_register+0x60/0xe0
[ 182.714113] ? 0xffffffffc01ba000
[ 182.714425] __pci_register_driver+0x4c/0x50
[ 182.714811] adfdrv_init+0x2f/0x1000 [qat_dh895xcc]
[ 182.715255] do_one_initcall+0x52/0x1a0
[ 182.715618] ? kmem_cache_alloc_trace+0x159/0x1b0
[ 182.716047] ? do_init_module+0x27/0x1f8
[ 182.716406] do_init_module+0x5f/0x1f8
[ 182.716754] load_module+0x27cc/0x2be0
[ 182.717096] SYSC_init_module+0x173/0x190
[ 182.717461] ? SYSC_init_module+0x173/0x190
[ 182.717837] SyS_init_module+0xe/0x10
[ 182.718169] do_syscall_64+0x67/0x180
[ 182.719638] entry_SYSCALL64_slow_path+0x25/0x25
[ 182.721178] RIP: 0033:0x7fd22ee715ca
[ 182.722622] RSP: 002b:00007ffc498bc428 EFLAGS: 00000246 ORIG_RAX:
00000000000000af
[ 182.724415] RAX: ffffffffffffffda RBX: 000055ba9680ca30 RCX: 00007fd22ee715ca
[ 182.726161] RDX: 00007fd22f9a3995 RSI: 0000000000003f03 RDI: 000055ba97066a00
[ 182.727897] RBP: 00007fd22f9a3995 R08: 000055ba9680d460 R09: 0000000000000000
[ 182.729624] R10: 0000000000000000 R11: 0000000000000246 R12: 000055ba97066a00
[ 182.731326] R13: 000055ba9681b030 R14: 0000000000020000 R15: 000055ba9680ca30
On Tue, Jun 13, 2017 at 1:32 PM, Raj Ammanur <[email protected]> wrote:
> Hi Neil & Salvatore,
>
> thanks for the replies. The soft reboot hasn't helped. I am trying a previous
> kernel version that works with a similar card that we installed in
> another server
> and that works fine. Will keep you posted.
>
> Neil: have you found fix/workaround for the firmware errors or you just using
> a soft reboot? by that, you just mean unload and load the kernel modules or
> a system reboot. I have tried both.
>
> thanks
> --Raj
>
> On Tue, Jun 13, 2017 at 5:30 AM, Neil Horman <[email protected]> wrote:
>> On Mon, Jun 12, 2017 at 03:52:07PM +0000, Benedetto, Salvatore wrote:
>>> Hi Raj,
>>>
>>> I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
>>> Are you seeing any of this with a previous kernel version? If not, git bisect might
>>> help us finding the root-cause.
>>> Have you tried with another platform/hw?
>>>
>>> Regards,
>>> Salvatore
>>>
>> Try a soft reboot and see if the error clears up. This looks a bit reminscient
>> of some firmware errors we've been chasing down
>> Neil
>>
>>> > -----Original Message-----
>>> > From: [email protected] [mailto:linux-crypto-
>>> > [email protected]] On Behalf Of Raj Ammanur
>>> > Sent: Friday, June 9, 2017 7:37 PM
>>> > To: Linux Crypto Mailing List <[email protected]>
>>> > Subject: Alg errors with Intel QAT Card
>>> >
>>> > Hi
>>> >
>>> > I am seeing the below errors after installing an Intel QAT card
>>> > and loading the upstreamed qat_dh895xcc and intel_qat modules.
>>> >
>>> > Have others seen similar errors and know if this is a known issue
>>> > and a fix exists or know whats going on ? This is with 4.12.0-rc4+
>>> > version of the kernel.
>>> >
>>> > Any help is sincerely appreciated.
>>> >
>>> > thanks
>>> > --Raj
>>> >
>>> >
>>> > [ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
>>> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
>>> > encryption for qat_aes_cbc
>>> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
>>> > at page 0 for qat_aes_ctr
>>> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
>>> > encryption for qat_aes_xts
>>> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
>>> > [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
>>> > [ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
>>> > (pkcs1pad(rsa-generic,sha256))
>>> > [ 2.562511] SELinux: Class alg_socket not defined in policy.
>>> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
>>> > encryption for qat_aes_cbc
>>> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
>>> > at page 0 for qat_aes_ctr
>>> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
>>> > encryption for qat_aes_xts
>>> > [ 4.367682] alg: akcipher: encrypt test failed. Invalid output
>>> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
>>> > [ 4.431827] alg: dh: generate public key test failed. Invalid output
>>> > [ 4.431829] alg: dh: test failed on vector 1, err=-22
>>> >
>>> >
>>> > 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
>>> > Subsystem: Intel Corporation Device 0000
>>> > Physical Slot: 2
>>> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>>> > Stepping- SERR+ FastB2B- DisINTx+
>>> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>>> > <TAbort- <MAbort- >SERR- <PERR- INTx-
>>> > Latency: 0, Cache Line Size: 32 bytes
>>> > Interrupt: pin A routed to IRQ 35
>>> > NUMA node: 1
>>> > Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
>>> > Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
>>> > Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
>>> > Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
>>> > Address: 0000000000000000 Data: 0000
>>> > Masking: 00000000 Pending: 00000000
>>> > Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
>>> > Vector table: BAR=2 offset=0003b000
>>> > PBA: BAR=2 offset=0003b800
>>> > Capabilities: [6c] Power Management version 3
>>> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
>>> > ,D3cold-)
>>> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>>> > Capabilities: [74] Express (v2) Endpoint, MSI 00
>>> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
>>> > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
>>> > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>>> > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
>>> > MaxPayload 256 bytes, MaxReadReq 1024 bytes
>>> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>>> > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
>>> > <512ns, L1 unlimited
>>> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>>> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>>> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>>> > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
>>> > BWMgmt- ABWMgmt-
>>> > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
>>> > Supported
>>> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>>> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
>>> > Disabled
>>> > AtomicOpsCtl: ReqEn-
>>> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
>>> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
>>> > ComplianceSOS-
>>> > Compliance De-emphasis: -6dB
>>> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
>>> > EqualizationPhase1-
>>> > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>>> > Capabilities: [100 v1] Advanced Error Reporting
>>> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>>> > MalfTLP- ECRC- UnsupReq- ACSViol-
>>> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
>>> > MalfTLP- ECRC- UnsupReq- ACSViol-
>>> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
>>> > MalfTLP+ ECRC- UnsupReq- ACSViol-
>>> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>>> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>>> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
>>> > Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
>>> > ARICap: MFVC- ACS-, Next Function: 0
>>> > ARICtl: MFVC- ACS-, Function Group: 0
>>> > Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
>>> > IOVCap: Migration-, Interrupt Message Number: 000
>>> > IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
>>> > IOVSta: Migration-
>>> > Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
>>> > VF offset: 8, stride: 1, Device ID: 0443
>>> > Supported Page Size: 00000553, System Page Size: 00000001
>>> > Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
>>> > Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
>>> > VF Migration: offset: 00000000, BIR: 0
>>> > Kernel driver in use: dh895xcc
>>> > Kernel modules: qat_dh895xcc
>>> >
>>> >
>>> > # lsmod | grep qat
>>> > qat_dh895xcc 16384 1
>>> > intel_qat 126976 13 qat_dh895xcc
>>> > dh_generic 16384 1 intel_qat
>>> > authenc 16384 1 intel_qat
>>> >
>>> > # modinfo qat_dh895xcc
>>> > filename:
>>> > /lib/modules/4.12.0-
>>> > rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
>>> > version: 0.6.0
>>> > description: Intel(R) QuickAssist Technology
>>> > firmware: qat_895xcc.bin
>>> > author: Intel
>>> > license: Dual BSD/GPL
>>> > srcversion: 37370A80B9807EC2308F493
>>> > alias: pci:v00008086d00000435sv*sd*bc*sc*i*
>>> > depends: intel_qat
>>> > intree: Y
>>> > vermagic: 4.12.0-rc4+ SMP mod_unload
>>> > signat: PKCS#7
>>> > signer:
>>> > sig_key:
>>> > sig_hashalgo: md4
On Tue, Jun 13, 2017 at 01:32:55PM -0700, Raj Ammanur wrote:
> Hi Neil & Salvatore,
>
> thanks for the replies. The soft reboot hasn't helped. I am trying a previous
> kernel version that works with a similar card that we installed in
> another server
> and that works fine. Will keep you posted.
>
> Neil: have you found fix/workaround for the firmware errors or you just using
> a soft reboot? by that, you just mean unload and load the kernel modules or
> a system reboot. I have tried both.
>
its the latter that works around the issue. I belive a QAT firmware update will
be forthcomming to fix the issue
Neil
> thanks
> --Raj
>
> On Tue, Jun 13, 2017 at 5:30 AM, Neil Horman <[email protected]> wrote:
> > On Mon, Jun 12, 2017 at 03:52:07PM +0000, Benedetto, Salvatore wrote:
> >> Hi Raj,
> >>
> >> I've compiled and tested kernel 4.12.0-rc4 and I can't reproduce your issue.
> >> Are you seeing any of this with a previous kernel version? If not, git bisect might
> >> help us finding the root-cause.
> >> Have you tried with another platform/hw?
> >>
> >> Regards,
> >> Salvatore
> >>
> > Try a soft reboot and see if the error clears up. This looks a bit reminscient
> > of some firmware errors we've been chasing down
> > Neil
> >
> >> > -----Original Message-----
> >> > From: [email protected] [mailto:linux-crypto-
> >> > [email protected]] On Behalf Of Raj Ammanur
> >> > Sent: Friday, June 9, 2017 7:37 PM
> >> > To: Linux Crypto Mailing List <[email protected]>
> >> > Subject: Alg errors with Intel QAT Card
> >> >
> >> > Hi
> >> >
> >> > I am seeing the below errors after installing an Intel QAT card
> >> > and loading the upstreamed qat_dh895xcc and intel_qat modules.
> >> >
> >> > Have others seen similar errors and know if this is a known issue
> >> > and a fix exists or know whats going on ? This is with 4.12.0-rc4+
> >> > version of the kernel.
> >> >
> >> > Any help is sincerely appreciated.
> >> >
> >> > thanks
> >> > --Raj
> >> >
> >> >
> >> > [ 3.639046] dh895xcc 0000:00:0b.0: qat_dev0 started 12 acceleration engines
> >> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> >> > encryption for qat_aes_cbc
> >> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> >> > at page 0 for qat_aes_ctr
> >> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> >> > encryption for qat_aes_xts
> >> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> >> > [root@dhcp-swlab-681 ~]# dmesg | grep -i alg
> >> > [ 1.499336] alg: No test for pkcs1pad(rsa,sha256)
> >> > (pkcs1pad(rsa-generic,sha256))
> >> > [ 2.562511] SELinux: Class alg_socket not defined in policy.
> >> > [ 4.168887] alg: skcipher-ddst: Test 5 failed (invalid result) on
> >> > encryption for qat_aes_cbc
> >> > [ 4.217866] alg: skcipher-ddst: Chunk test 1 failed on encryption
> >> > at page 0 for qat_aes_ctr
> >> > [ 4.282042] alg: skcipher: Test 4 failed (invalid result) on
> >> > encryption for qat_aes_xts
> >> > [ 4.367682] alg: akcipher: encrypt test failed. Invalid output
> >> > [ 4.395210] alg: akcipher: test 1 failed for qat-rsa, err=-22
> >> > [ 4.431827] alg: dh: generate public key test failed. Invalid output
> >> > [ 4.431829] alg: dh: test failed on vector 1, err=-22
> >> >
> >> >
> >> > 83:00.0 Co-processor: Intel Corporation DH895XCC Series QAT
> >> > Subsystem: Intel Corporation Device 0000
> >> > Physical Slot: 2
> >> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> >> > Stepping- SERR+ FastB2B- DisINTx+
> >> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> >> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >> > Latency: 0, Cache Line Size: 32 bytes
> >> > Interrupt: pin A routed to IRQ 35
> >> > NUMA node: 1
> >> > Region 0: Memory at fb900000 (64-bit, prefetchable) [size=512K]
> >> > Region 2: Memory at fbd40000 (64-bit, non-prefetchable) [size=256K]
> >> > Region 4: Memory at fbd00000 (64-bit, non-prefetchable) [size=256K]
> >> > Capabilities: [b0] MSI: Enable- Count=1/1 Maskable+ 64bit+
> >> > Address: 0000000000000000 Data: 0000
> >> > Masking: 00000000 Pending: 00000000
> >> > Capabilities: [60] MSI-X: Enable+ Count=33 Masked-
> >> > Vector table: BAR=2 offset=0003b000
> >> > PBA: BAR=2 offset=0003b800
> >> > Capabilities: [6c] Power Management version 3
> >> > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-
> >> > ,D3cold-)
> >> > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> >> > Capabilities: [74] Express (v2) Endpoint, MSI 00
> >> > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <128ns, L1 <1us
> >> > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> >> > DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> >> > RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset-
> >> > MaxPayload 256 bytes, MaxReadReq 1024 bytes
> >> > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
> >> > LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s, Exit Latency L0s
> >> > <512ns, L1 unlimited
> >> > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> >> > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
> >> > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> >> > LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk- DLActive-
> >> > BWMgmt- ABWMgmt-
> >> > DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR-, OBFF Not
> >> > Supported
> >> > AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> >> > DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF
> >> > Disabled
> >> > AtomicOpsCtl: ReqEn-
> >> > LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
> >> > Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
> >> > ComplianceSOS-
> >> > Compliance De-emphasis: -6dB
> >> > LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-,
> >> > EqualizationPhase1-
> >> > EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
> >> > Capabilities: [100 v1] Advanced Error Reporting
> >> > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> > MalfTLP- ECRC- UnsupReq- ACSViol-
> >> > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
> >> > MalfTLP- ECRC- UnsupReq- ACSViol-
> >> > UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
> >> > MalfTLP+ ECRC- UnsupReq- ACSViol-
> >> > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> >> > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> >> > AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
> >> > Capabilities: [138 v1] Alternative Routing-ID Interpretation (ARI)
> >> > ARICap: MFVC- ACS-, Next Function: 0
> >> > ARICtl: MFVC- ACS-, Function Group: 0
> >> > Capabilities: [140 v1] Single Root I/O Virtualization (SR-IOV)
> >> > IOVCap: Migration-, Interrupt Message Number: 000
> >> > IOVCtl: Enable- Migration- Interrupt- MSE- ARIHierarchy+
> >> > IOVSta: Migration-
> >> > Initial VFs: 32, Total VFs: 32, Number of VFs: 0, Function Dependency Link: 00
> >> > VF offset: 8, stride: 1, Device ID: 0443
> >> > Supported Page Size: 00000553, System Page Size: 00000001
> >> > Region 0: Memory at 00000000fbd80000 (64-bit, non-prefetchable)
> >> > Region 2: Memory at 00000000fbda0000 (64-bit, non-prefetchable)
> >> > VF Migration: offset: 00000000, BIR: 0
> >> > Kernel driver in use: dh895xcc
> >> > Kernel modules: qat_dh895xcc
> >> >
> >> >
> >> > # lsmod | grep qat
> >> > qat_dh895xcc 16384 1
> >> > intel_qat 126976 13 qat_dh895xcc
> >> > dh_generic 16384 1 intel_qat
> >> > authenc 16384 1 intel_qat
> >> >
> >> > # modinfo qat_dh895xcc
> >> > filename:
> >> > /lib/modules/4.12.0-
> >> > rc4+/kernel/drivers/crypto/qat/qat_dh895xcc/qat_dh895xcc.ko
> >> > version: 0.6.0
> >> > description: Intel(R) QuickAssist Technology
> >> > firmware: qat_895xcc.bin
> >> > author: Intel
> >> > license: Dual BSD/GPL
> >> > srcversion: 37370A80B9807EC2308F493
> >> > alias: pci:v00008086d00000435sv*sd*bc*sc*i*
> >> > depends: intel_qat
> >> > intree: Y
> >> > vermagic: 4.12.0-rc4+ SMP mod_unload
> >> > signat: PKCS#7
> >> > signer:
> >> > sig_key:
> >> > sig_hashalgo: md4
>