Selftests report the following:
[ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
[ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.043185] 00000000: fe dc ba 98 76 54 32 10
[ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
[ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
This above dumps show that the actual output IV is indeed the input IV.
This is due to the IV not being copied back into the request.
This patch fixes that.
Signed-off-by: Christophe Leroy <[email protected]>
---
drivers/crypto/talitos.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 1d429fc073d1..f443cbe7da80 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -1637,11 +1637,15 @@ static void ablkcipher_done(struct device *dev,
int err)
{
struct ablkcipher_request *areq = context;
+ struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
+ struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
+ unsigned int ivsize = crypto_ablkcipher_ivsize(cipher);
struct talitos_edesc *edesc;
edesc = container_of(desc, struct talitos_edesc, desc);
common_nonsnoop_unmap(dev, edesc, areq);
+ memcpy(areq->info, ctx->iv, ivsize);
kfree(edesc);
--
2.13.3
On 5/15/2019 3:29 PM, Christophe Leroy wrote:
> Selftests report the following:
>
> [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
> [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 3.043185] 00000000: fe dc ba 98 76 54 32 10
> [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
>
> This above dumps show that the actual output IV is indeed the input IV.
> This is due to the IV not being copied back into the request.
>
> This patch fixes that.
>
> Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Horia Geant? <[email protected]>
While here, could you please check ecb mode (which by definition does not have
an IV) is behaving correctly?
Looking in driver_algs[] list of crypto algorithms supported by talitos,
ecb(aes,des,3des) are declared with ivsize != 0.
Thanks,
Horia
Le 15/05/2019 à 16:05, Horia Geanta a écrit :
> On 5/15/2019 3:29 PM, Christophe Leroy wrote:
>> Selftests report the following:
>>
>> [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>> [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
>> [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>> [ 3.043185] 00000000: fe dc ba 98 76 54 32 10
>> [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>> [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
>>
>> This above dumps show that the actual output IV is indeed the input IV.
>> This is due to the IV not being copied back into the request.
>>
>> This patch fixes that.
>>
>> Signed-off-by: Christophe Leroy <[email protected]>
> Reviewed-by: Horia Geantă <[email protected]>
It's missing a Fixes: tag and a Cc: to stable.
I'll resend tomorrow.
>
> While here, could you please check ecb mode (which by definition does not have
> an IV) is behaving correctly?
> Looking in driver_algs[] list of crypto algorithms supported by talitos,
> ecb(aes,des,3des) are declared with ivsize != 0.
According to /proc/crypto, test are passed for ecb.
Christophe
>
> Thanks,
> Horia
>
On Wed, May 15, 2019 at 08:49:48PM +0200, Christophe Leroy wrote:
>
>
> Le 15/05/2019 à 16:05, Horia Geanta a écrit :
> > On 5/15/2019 3:29 PM, Christophe Leroy wrote:
> > > Selftests report the following:
> > >
> > > [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> > > [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
> > > [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> > > [ 3.043185] 00000000: fe dc ba 98 76 54 32 10
> > > [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> > > [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
> > >
> > > This above dumps show that the actual output IV is indeed the input IV.
> > > This is due to the IV not being copied back into the request.
> > >
> > > This patch fixes that.
> > >
> > > Signed-off-by: Christophe Leroy <[email protected]>
> > Reviewed-by: Horia Geantă <[email protected]>
>
> It's missing a Fixes: tag and a Cc: to stable.
>
> I'll resend tomorrow.
>
> >
> > While here, could you please check ecb mode (which by definition does not have
> > an IV) is behaving correctly?
> > Looking in driver_algs[] list of crypto algorithms supported by talitos,
> > ecb(aes,des,3des) are declared with ivsize != 0.
>
> According to /proc/crypto, test are passed for ecb.
>
Did you try enabling CONFIG_CRYPTO_MANAGER_EXTRA_TESTS? There is now a check
that the driver's ivsize matches the generic implementation's:
if (ivsize != crypto_skcipher_ivsize(generic_tfm)) {
pr_err("alg: skcipher: ivsize for %s (%u) doesn't match generic impl (%u)\n",
driver, ivsize, crypto_skcipher_ivsize(generic_tfm));
err = -EINVAL;
goto out;
}
For ECB that means the ivsize must be 0.
AFAICS the talitos driver even accesses the IV for ECB, which is wrong; and the
only reason this isn't crashing the self-tests already is that they are confused
by the declared ivsize being nonzero so they don't pass NULL as they should.
- Eric
Le 16/05/2019 à 04:30, Eric Biggers a écrit :
> On Wed, May 15, 2019 at 08:49:48PM +0200, Christophe Leroy wrote:
>>
>>
>> Le 15/05/2019 à 16:05, Horia Geanta a écrit :
>>> On 5/15/2019 3:29 PM, Christophe Leroy wrote:
>>>> Selftests report the following:
>>>>
>>>> [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>>>> [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
>>>> [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>>>> [ 3.043185] 00000000: fe dc ba 98 76 54 32 10
>>>> [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
>>>> [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
>>>>
>>>> This above dumps show that the actual output IV is indeed the input IV.
>>>> This is due to the IV not being copied back into the request.
>>>>
>>>> This patch fixes that.
>>>>
>>>> Signed-off-by: Christophe Leroy <[email protected]>
>>> Reviewed-by: Horia Geantă <[email protected]>
>>
>> It's missing a Fixes: tag and a Cc: to stable.
>>
>> I'll resend tomorrow.
>>
>>>
>>> While here, could you please check ecb mode (which by definition does not have
>>> an IV) is behaving correctly?
>>> Looking in driver_algs[] list of crypto algorithms supported by talitos,
>>> ecb(aes,des,3des) are declared with ivsize != 0.
>>
>> According to /proc/crypto, test are passed for ecb.
>>
>
> Did you try enabling CONFIG_CRYPTO_MANAGER_EXTRA_TESTS? There is now a check
> that the driver's ivsize matches the generic implementation's:
>
> if (ivsize != crypto_skcipher_ivsize(generic_tfm)) {
> pr_err("alg: skcipher: ivsize for %s (%u) doesn't match generic impl (%u)\n",
> driver, ivsize, crypto_skcipher_ivsize(generic_tfm));
> err = -EINVAL;
> goto out;
> }
>
> For ECB that means the ivsize must be 0.
>
> AFAICS the talitos driver even accesses the IV for ECB, which is wrong; and the
> only reason this isn't crashing the self-tests already is that they are confused
> by the declared ivsize being nonzero so they don't pass NULL as they should.
>
Ok, thanks. I'll try and run EXTRA TESTS as soon as I get the current
test all fixed.
For the time being, I'm having a problem that I'm a bit lost with:
AEAD decryption fails at the moment for out-of-line tests, and the
reason is that the ICV (used to do the SW compare with the expected one)
is generated after the decrypted data.
It works perfectly when src == dst, because the src has space for it,
but when the dst is different, the dst length is smaller so the ICV is
generated outside the sg list, and the comparison fails because the
comparison is done with the last bytes of the last segment of dst sg
list (which corresponds to the end of decrypted data in that case).
What I'm having hard time with it that it seems that when the sg list
has several elements, it uses an out of line area for generating the ICV
but not when the sg list has only one element. I'm really wondering why.
Thanks
Christophe
On Wed, May 15, 2019 at 12:29:03PM +0000, Christophe Leroy wrote:
> Selftests report the following:
>
> [ 2.984845] alg: skcipher: cbc-aes-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 2.995377] 00000000: 3d af ba 42 9d 9e b4 30 b4 22 da 80 2c 9f ac 41
> [ 3.032673] alg: skcipher: cbc-des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 3.043185] 00000000: fe dc ba 98 76 54 32 10
> [ 3.063238] alg: skcipher: cbc-3des-talitos encryption test failed (wrong output IV) on test vector 0, cfg="in-place"
> [ 3.073818] 00000000: 7d 33 88 93 0f 93 b2 42
>
> This above dumps show that the actual output IV is indeed the input IV.
> This is due to the IV not being copied back into the request.
>
> This patch fixes that.
>
> Signed-off-by: Christophe Leroy <[email protected]>
> ---
> drivers/crypto/talitos.c | 4 ++++
> 1 file changed, 4 insertions(+)
Patch applied. Thanks.
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt