From: Keerthy <[email protected]>
Add crypto accelarator node for supporting hardware crypto algorithms,
including SHA1, SHA256, SHA512, AES, 3DES, and AEAD suites.
Signed-off-by: Keerthy <[email protected]>
[[email protected]: Modifications based on introduction of yaml binding]
Signed-off-by: Tero Kristo <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 96c929da639d..df640680e564 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -268,6 +268,29 @@
};
};
+ main_crypto: crypto@4E00000 {
+ compatible = "ti,j721e-sa2ul";
+ reg = <0x0 0x4E00000 0x0 0x1200>;
+ power-domains = <&k3_pds 264 TI_SCI_PD_EXCLUSIVE>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x04E00000 0x00 0x04E00000 0x0 0x30000>;
+
+ status = "okay";
+
+ dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
+ <&main_udmap 0x4001>;
+ dma-names = "tx", "rx1", "rx2";
+ dma-coherent;
+
+ rng: rng@4e10000 {
+ compatible = "inside-secure,safexcel-eip76";
+ reg = <0x0 0x4e10000 0x0 0x7d>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 264 1>;
+ };
+ };
+
main_pmx0: pinmux@11c000 {
compatible = "pinctrl-single";
/* Proxy 0 addressing */
--
2.17.1
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki