2022-11-23 12:24:54

by Cabiddu, Giovanni

[permalink] [raw]
Subject: [PATCH v2 00/11] crypto: qat - enable compression deflate algorithm

This set enables the offload of the compression deflate algorithm to QAT
accelerators through the acomp API.

The first part of the set (patches 1 to 8) reworks and refactors logic
that is specific to the crypto service in order to be used by the
compression service.
In particular, the first 6 patches rework the buffer list logic, which
is used to map, unmap and convert scatterlists into the format that the
QAT firmware can understand. These relocate the bufferlist logic to a
separate file, change the interfaces so that the logic is service
agnostic (not tied to compression or crypto) and extend the interface to
allow an additional pre-allocated buffer for each destination scatter list
which will be used to avoid premature overflows reported by the compression
hardware.
Patch 7 relocates the function qat_algs_alloc_flags() from a crypto
specific header to qat_bl.h.
Patch 8 moves and renames the configuration function for GEN2,
qat_crypto_dev_config(), to a new file, adf_gen2_config.h, which
contains the configuration logic for both crypto and compression
instances for QAT GEN2 devices.

The last 2 patches in the set introduce all the infrastructure required
to enable the compression service in the QAT driver and expose it through
the acomp APIs.
In particular, patch 9 introduces the logic related to the creation
and handling of compression instances and their configuration.
In addition, it adds the back-end for qat_deflate to plug into acomp,
including the logic to build descriptors for the newly added GEN2 compression
firmware APIs.

This was all kept in a single patch to avoid introducing unused logic in
the QAT driver in previous patches.

Patch 10, extends the compression logic to support to QAT GEN4 devices.

Patch 11 implements the resubmission logic for decompression requests
that is triggered if the destination buffer, allocated by the driver,
is not sufficiently big to store the output from the operation.

Changes from v1:
- Implemented resubmission logic for decompression triggered when
the output buffer allocated by the driver is not sufficiently large to
store the result from the operation
- Renamed buffer list functions that are moved to the qat_bl module

Giovanni Cabiddu (11):
crypto: qat - relocate bufferlist logic
crypto: qat - rename bufferlist functions
crypto: qat - change bufferlist logic interface
crypto: qat - generalize crypto request buffers
crypto: qat - extend buffer list interface
crypto: qat - relocate backlog related structures
crypto: qat - relocate qat_algs_alloc_flags()
crypto: qat - rename and relocate GEN2 config function
crypto: qat - expose deflate through acomp api for QAT GEN2
crypto: qat - enable deflate for QAT GEN4
crypto: qat - add resubmit logic for decompression

.../crypto/qat/qat_4xxx/adf_4xxx_hw_data.c | 4 +-
.../crypto/qat/qat_4xxx/adf_4xxx_hw_data.h | 2 +-
drivers/crypto/qat/qat_4xxx/adf_drv.c | 145 +++++-
.../crypto/qat/qat_c3xxx/adf_c3xxx_hw_data.c | 4 +
drivers/crypto/qat/qat_c3xxx/adf_drv.c | 2 +-
.../qat/qat_c3xxxvf/adf_c3xxxvf_hw_data.c | 4 +
.../crypto/qat/qat_c62x/adf_c62x_hw_data.c | 4 +
drivers/crypto/qat/qat_c62x/adf_drv.c | 2 +-
.../qat/qat_c62xvf/adf_c62xvf_hw_data.c | 4 +
drivers/crypto/qat/qat_common/Makefile | 8 +-
.../crypto/qat/qat_common/adf_accel_devices.h | 14 +
.../crypto/qat/qat_common/adf_cfg_strings.h | 1 +
.../crypto/qat/qat_common/adf_common_drv.h | 9 +-
drivers/crypto/qat/qat_common/adf_ctl_drv.c | 6 +
.../crypto/qat/qat_common/adf_gen2_config.c | 206 ++++++++
.../crypto/qat/qat_common/adf_gen2_config.h | 10 +
drivers/crypto/qat/qat_common/adf_gen2_dc.c | 70 +++
drivers/crypto/qat/qat_common/adf_gen2_dc.h | 10 +
drivers/crypto/qat/qat_common/adf_gen4_dc.c | 83 ++++
drivers/crypto/qat/qat_common/adf_gen4_dc.h | 10 +
drivers/crypto/qat/qat_common/adf_init.c | 11 +
drivers/crypto/qat/qat_common/adf_sriov.c | 4 +
drivers/crypto/qat/qat_common/icp_qat_fw.h | 24 +
.../crypto/qat/qat_common/icp_qat_fw_comp.h | 404 ++++++++++++++++
drivers/crypto/qat/qat_common/icp_qat_hw.h | 66 +++
.../qat/qat_common/icp_qat_hw_20_comp.h | 164 +++++++
.../qat/qat_common/icp_qat_hw_20_comp_defs.h | 300 ++++++++++++
drivers/crypto/qat/qat_common/qat_algs.c | 208 +-------
drivers/crypto/qat/qat_common/qat_algs_send.h | 16 +-
drivers/crypto/qat/qat_common/qat_bl.c | 451 ++++++++++++++++++
drivers/crypto/qat/qat_common/qat_bl.h | 67 +++
drivers/crypto/qat/qat_common/qat_comp_algs.c | 349 ++++++++++++++
drivers/crypto/qat/qat_common/qat_comp_req.h | 123 +++++
.../crypto/qat/qat_common/qat_compression.c | 297 ++++++++++++
.../crypto/qat/qat_common/qat_compression.h | 37 ++
drivers/crypto/qat/qat_common/qat_crypto.c | 120 +----
drivers/crypto/qat/qat_common/qat_crypto.h | 55 +--
.../qat/qat_dh895xcc/adf_dh895xcc_hw_data.c | 4 +
drivers/crypto/qat/qat_dh895xcc/adf_drv.c | 2 +-
.../qat_dh895xccvf/adf_dh895xccvf_hw_data.c | 4 +
40 files changed, 2920 insertions(+), 384 deletions(-)
create mode 100644 drivers/crypto/qat/qat_common/adf_gen2_config.c
create mode 100644 drivers/crypto/qat/qat_common/adf_gen2_config.h
create mode 100644 drivers/crypto/qat/qat_common/adf_gen2_dc.c
create mode 100644 drivers/crypto/qat/qat_common/adf_gen2_dc.h
create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_dc.c
create mode 100644 drivers/crypto/qat/qat_common/adf_gen4_dc.h
create mode 100644 drivers/crypto/qat/qat_common/icp_qat_fw_comp.h
create mode 100644 drivers/crypto/qat/qat_common/icp_qat_hw_20_comp.h
create mode 100644 drivers/crypto/qat/qat_common/icp_qat_hw_20_comp_defs.h
create mode 100644 drivers/crypto/qat/qat_common/qat_bl.c
create mode 100644 drivers/crypto/qat/qat_common/qat_bl.h
create mode 100644 drivers/crypto/qat/qat_common/qat_comp_algs.c
create mode 100644 drivers/crypto/qat/qat_common/qat_comp_req.h
create mode 100644 drivers/crypto/qat/qat_common/qat_compression.c
create mode 100644 drivers/crypto/qat/qat_common/qat_compression.h

--
2.38.1