Set a more reasonable timeout for the rngc selftest.
According to the reference manual, "The self test takes approximately
29,000 cycles to complete." The lowest possible frequency of the rngc
peripheral clock is 33.25MHz, the selftest would then take about 872us.
2.5ms should be enough for the selftest timeout.
Signed-off-by: Martin Kaiser <[email protected]>
---
drivers/char/hw_random/imx-rngc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/char/hw_random/imx-rngc.c b/drivers/char/hw_random/imx-rngc.c
index e4b385b01b11..127c292dfbbf 100644
--- a/drivers/char/hw_random/imx-rngc.c
+++ b/drivers/char/hw_random/imx-rngc.c
@@ -53,6 +53,7 @@
#define RNGC_TIMEOUT 3000 /* 3 sec */
+#define RNGC_SELFTEST_TIMEOUT 2500 /* us */
static bool self_test = true;
module_param(self_test, bool, 0);
@@ -110,7 +111,8 @@ static int imx_rngc_self_test(struct imx_rngc *rngc)
cmd = readl(rngc->base + RNGC_COMMAND);
writel(cmd | RNGC_CMD_SELF_TEST, rngc->base + RNGC_COMMAND);
- ret = wait_for_completion_timeout(&rngc->rng_op_done, msecs_to_jiffies(RNGC_TIMEOUT));
+ ret = wait_for_completion_timeout(&rngc->rng_op_done,
+ usecs_to_jiffies(RNGC_SELFTEST_TIMEOUT));
imx_rngc_irq_mask_clear(rngc);
if (!ret)
return -ETIMEDOUT;
--
2.39.2