Read the values of some device registers before the device
is reset, these values help analyze the cause of the device exception.
Signed-off-by: Weili Qian <[email protected]>
---
drivers/crypto/hisilicon/debugfs.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/crypto/hisilicon/debugfs.c b/drivers/crypto/hisilicon/debugfs.c
index 615c8e18d8b0..06e67eda409f 100644
--- a/drivers/crypto/hisilicon/debugfs.c
+++ b/drivers/crypto/hisilicon/debugfs.c
@@ -83,6 +83,30 @@ static const struct debugfs_reg32 qm_dfx_regs[] = {
{"QM_DFX_FF_ST5 ", 0x1040dc},
{"QM_DFX_FF_ST6 ", 0x1040e0},
{"QM_IN_IDLE_ST ", 0x1040e4},
+ {"QM_CACHE_CTL ", 0x100050},
+ {"QM_TIMEOUT_CFG ", 0x100070},
+ {"QM_DB_TIMEOUT_CFG ", 0x100074},
+ {"QM_FLR_PENDING_TIME_CFG ", 0x100078},
+ {"QM_ARUSR_MCFG1 ", 0x100088},
+ {"QM_AWUSR_MCFG1 ", 0x100098},
+ {"QM_AXI_M_CFG_ENABLE ", 0x1000B0},
+ {"QM_RAS_CE_THRESHOLD ", 0x1000F8},
+ {"QM_AXI_TIMEOUT_CTRL ", 0x100120},
+ {"QM_AXI_TIMEOUT_STATUS ", 0x100124},
+ {"QM_CQE_AGGR_TIMEOUT_CTRL ", 0x100144},
+ {"ACC_RAS_MSI_INT_SEL ", 0x1040fc},
+ {"QM_CQE_OUT ", 0x104100},
+ {"QM_EQE_OUT ", 0x104104},
+ {"QM_AEQE_OUT ", 0x104108},
+ {"QM_DB_INFO0 ", 0x104180},
+ {"QM_DB_INFO1 ", 0x104184},
+ {"QM_AM_CTRL_GLOBAL ", 0x300000},
+ {"QM_AM_CURR_PORT_STS ", 0x300100},
+ {"QM_AM_CURR_TRANS_RETURN ", 0x300150},
+ {"QM_AM_CURR_RD_MAX_TXID ", 0x300154},
+ {"QM_AM_CURR_WR_MAX_TXID ", 0x300158},
+ {"QM_AM_ALARM_RRESP ", 0x300180},
+ {"QM_AM_ALARM_BRESP ", 0x300184},
};
static const struct debugfs_reg32 qm_vf_dfx_regs[] = {
--
2.33.0