Enable crypto support for ipq9574.
Signed-off-by: Anusha Rao <[email protected]>
---
Changes in V3:
- No change.
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index fea15f3cf910..6e52d35a6a15 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -123,6 +123,26 @@
clock-names = "core";
};
+ cryptobam: dma-controller@704000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x00704000 0x20000>;
+ interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,controlled-remotely;
+ };
+
+ crypto: crypto@73a000 {
+ compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
+ reg = <0x0073a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+ <&gcc GCC_CRYPTO_AXI_CLK>,
+ <&gcc GCC_CRYPTO_CLK>;
+ clock-names = "iface", "bus", "core";
+ dmas = <&cryptobam 2>, <&cryptobam 3>;
+ dma-names = "rx", "tx";
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq9574-tlmm";
reg = <0x01000000 0x300000>;
--
2.17.1
On 18/05/2023 16:11, Anusha Rao wrote:
> Enable crypto support for ipq9574.
>
> Signed-off-by: Anusha Rao <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 5/18/23 7:41 PM, Anusha Rao <[email protected]> wrote:
> Enable crypto support for ipq9574.
>
> Signed-off-by: Anusha Rao <[email protected]>
> ---
> Changes in V3:
> - No change.
>
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index fea15f3cf910..6e52d35a6a15 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -123,6 +123,26 @@
> clock-names = "core";
> };
>
> + cryptobam: dma-controller@704000 {
> + compatible = "qcom,bam-v1.7.0";
Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If "qcom,bam-v1.7.4" please use the newer compatible format.
Thanks,
Bhupesh
> + reg = <0x00704000 0x20000>;
> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + qcom,ee = <1>;
> + qcom,controlled-remotely;
> + };
> +
> + crypto: crypto@73a000 {
> + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce", "qcom,qce";
> + reg = <0x0073a000 0x6000>;
> + clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
> + <&gcc GCC_CRYPTO_AXI_CLK>,
> + <&gcc GCC_CRYPTO_CLK>;
> + clock-names = "iface", "bus", "core";
> + dmas = <&cryptobam 2>, <&cryptobam 3>;
> + dma-names = "rx", "tx";
> + };
> +
> tlmm: pinctrl@1000000 {
> compatible = "qcom,ipq9574-tlmm";
> reg = <0x01000000 0x300000>;
>
On 5/22/2023 2:23 PM, [email protected] wrote:
> On 5/18/23 7:41 PM, Anusha Rao <[email protected]> wrote:
>> Enable crypto support for ipq9574.
>>
>> Signed-off-by: Anusha Rao <[email protected]>
>> ---
>> Changes in V3:
>> - No change.
>>
>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 20 ++++++++++++++++++++
>> 1 file changed, 20 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> index fea15f3cf910..6e52d35a6a15 100644
>> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>> @@ -123,6 +123,26 @@
>> clock-names = "core";
>> };
>> + cryptobam: dma-controller@704000 {
>> + compatible = "qcom,bam-v1.7.0";
>
> Please confirm if this is "qcom,bam-v1.7.4" or "qcom,bam-v1.7.0". If
> "qcom,bam-v1.7.4" please use the newer compatible format.
Sure, will update.
Thanks,
Anusha
>
> Thanks,
> Bhupesh
>
>> + reg = <0x00704000 0x20000>;
>> + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + qcom,ee = <1>;
>> + qcom,controlled-remotely;
>> + };
>> +
>> + crypto: crypto@73a000 {
>> + compatible = "qcom,ipq9574-qce", "qcom,ipq4019-qce",
>> "qcom,qce";
>> + reg = <0x0073a000 0x6000>;
>> + clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
>> + <&gcc GCC_CRYPTO_AXI_CLK>,
>> + <&gcc GCC_CRYPTO_CLK>;
>> + clock-names = "iface", "bus", "core";
>> + dmas = <&cryptobam 2>, <&cryptobam 3>;
>> + dma-names = "rx", "tx";
>> + };
>> +
>> tlmm: pinctrl@1000000 {
>> compatible = "qcom,ipq9574-tlmm";
>> reg = <0x01000000 0x300000>;
>>