From: Giovanni Cabiddu <[email protected]>
Add and use the new helper function adf_get_etr_base() which retrieves
the virtual address of the ring bar.
This will be used extensively when adding support for Live Migration.
Signed-off-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Xin Zeng <[email protected]>
Signed-off-by: Xin Zeng <[email protected]>
---
drivers/crypto/intel/qat/qat_common/adf_common_drv.h | 10 ++++++++++
drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c | 4 +---
drivers/crypto/intel/qat/qat_common/adf_transport.c | 4 +---
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/crypto/intel/qat/qat_common/adf_common_drv.h b/drivers/crypto/intel/qat/qat_common/adf_common_drv.h
index 57328249c89e..3bec9e20bad0 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_common_drv.h
+++ b/drivers/crypto/intel/qat/qat_common/adf_common_drv.h
@@ -248,6 +248,16 @@ static inline void __iomem *adf_get_pmisc_base(struct adf_accel_dev *accel_dev)
return pmisc->virt_addr;
}
+static inline void __iomem *adf_get_etr_base(struct adf_accel_dev *accel_dev)
+{
+ struct adf_hw_device_data *hw_data = accel_dev->hw_device;
+ struct adf_bar *etr;
+
+ etr = &GET_BARS(accel_dev)[hw_data->get_etr_bar_id(hw_data)];
+
+ return etr->virt_addr;
+}
+
static inline void __iomem *adf_get_aram_base(struct adf_accel_dev *accel_dev)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
diff --git a/drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c b/drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c
index d28e1921940a..b8a6d24f791f 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c
@@ -321,8 +321,7 @@ static int reset_ring_pair(void __iomem *csr, u32 bank_number)
int adf_gen4_ring_pair_reset(struct adf_accel_dev *accel_dev, u32 bank_number)
{
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
- u32 etr_bar_id = hw_data->get_etr_bar_id(hw_data);
- void __iomem *csr;
+ void __iomem *csr = adf_get_etr_base(accel_dev);
int ret;
if (bank_number >= hw_data->num_banks)
@@ -331,7 +330,6 @@ int adf_gen4_ring_pair_reset(struct adf_accel_dev *accel_dev, u32 bank_number)
dev_dbg(&GET_DEV(accel_dev),
"ring pair reset for bank:%d\n", bank_number);
- csr = (&GET_BARS(accel_dev)[etr_bar_id])->virt_addr;
ret = reset_ring_pair(csr, bank_number);
if (ret)
dev_err(&GET_DEV(accel_dev),
diff --git a/drivers/crypto/intel/qat/qat_common/adf_transport.c b/drivers/crypto/intel/qat/qat_common/adf_transport.c
index 630d0483c4e0..1efdf46490f1 100644
--- a/drivers/crypto/intel/qat/qat_common/adf_transport.c
+++ b/drivers/crypto/intel/qat/qat_common/adf_transport.c
@@ -474,7 +474,6 @@ static int adf_init_bank(struct adf_accel_dev *accel_dev,
int adf_init_etr_data(struct adf_accel_dev *accel_dev)
{
struct adf_etr_data *etr_data;
- struct adf_hw_device_data *hw_data = accel_dev->hw_device;
void __iomem *csr_addr;
u32 size;
u32 num_banks = 0;
@@ -495,8 +494,7 @@ int adf_init_etr_data(struct adf_accel_dev *accel_dev)
}
accel_dev->transport = etr_data;
- i = hw_data->get_etr_bar_id(hw_data);
- csr_addr = accel_dev->accel_pci_dev.pci_bars[i].virt_addr;
+ csr_addr = adf_get_etr_base(accel_dev);
/* accel_dev->debugfs_dir should always be non-NULL here */
etr_data->debug = debugfs_create_dir("transport",
--
2.18.2
> From: Zeng, Xin <[email protected]>
> Sent: Wednesday, February 28, 2024 10:34 PM
>
> From: Giovanni Cabiddu <[email protected]>
>
> Add and use the new helper function adf_get_etr_base() which retrieves
> the virtual address of the ring bar.
>
> This will be used extensively when adding support for Live Migration.
>
> Signed-off-by: Giovanni Cabiddu <[email protected]>
> Reviewed-by: Xin Zeng <[email protected]>
> Signed-off-by: Xin Zeng <[email protected]>
IMHO s-o-b already implies that the author has reviewed his own code...