From: Fabio Estevam <[email protected]>
imx6ul and imx7 report the following error:
caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
Protocol Size Error - A protocol has seen an error in size. When
running RSA, pdb size N < (size of F) when no formatting is used; or
pdb size N < (F + 11) when formatting is used.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
public_key_verify_signature+0x27c/0x2b0
This error happens because the signature contains 257 bytes, including
a leading zero as the first element.
Fix the problem by striping off the leading zero from input data
before feeding it to the CAAM accelerator.
Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
Cc: <[email protected]>
Reported-by: Martin Townsend <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
---
drivers/crypto/caam/caampkc.c | 43 +++++++++++++++++++++++++++++++++++--------
1 file changed, 35 insertions(+), 8 deletions(-)
diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
index 7a897209..d2ad547 100644
--- a/drivers/crypto/caam/caampkc.c
+++ b/drivers/crypto/caam/caampkc.c
@@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
akcipher_request_complete(req, err);
}
+static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
+{
+ while (!**ptr && *nbytes) {
+ (*ptr)++;
+ (*nbytes)--;
+ }
+}
+
static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
size_t desclen)
{
@@ -178,7 +186,34 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
int sgc;
int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
int src_nents, dst_nents;
+ const u8 *buffer;
+ size_t len;
+
+ buffer = kzalloc(req->src_len, GFP_ATOMIC);
+ if (!buffer)
+ return ERR_PTR(-ENOMEM);
+
+ sg_copy_to_buffer(req->src, sg_nents(req->src),
+ (void *)buffer, req->src_len);
+ len = req->src_len;
+ /*
+ * Check if the buffer contains leading zero and if
+ * it does, drop the leading zero
+ */
+ if (buffer[0] == 0) {
+ caam_rsa_drop_leading_zeros(&buffer, &len);
+ if (!buffer) {
+ kfree(buffer);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ req->src_len -= 1;
+ sg_copy_from_buffer(req->src, sg_nents(req->src),
+ (void *)buffer, req->src_len);
+ }
+
+ kfree(buffer);
src_nents = sg_nents_for_len(req->src, req->src_len);
dst_nents = sg_nents_for_len(req->dst, req->dst_len);
@@ -683,14 +718,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
memset(key, 0, sizeof(*key));
}
-static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
-{
- while (!**ptr && *nbytes) {
- (*ptr)++;
- (*nbytes)--;
- }
-}
-
/**
* caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
* dP, dQ and qInv could decode to less than corresponding p, q length, as the
--
2.7.4
Hi Fabio
On Sat, Apr 14, 2018 at 9:50 PM, Fabio Estevam <[email protected]> wrote:
> From: Fabio Estevam <[email protected]>
>
> imx6ul and imx7 report the following error:
>
> caam_jr 2142000.jr1: 40000789: DECO: desc idx 7:
> Protocol Size Error - A protocol has seen an error in size. When
> running RSA, pdb size N < (size of F) when no formatting is used; or
> pdb size N < (F + 11) when formatting is used.
>
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at crypto/asymmetric_keys/public_key.c:148
> public_key_verify_signature+0x27c/0x2b0
>
> This error happens because the signature contains 257 bytes, including
> a leading zero as the first element.
>
> Fix the problem by striping off the leading zero from input data
> before feeding it to the CAAM accelerator.
>
> Fixes: 8c419778ab57e497b5 ("crypto: caam - add support for RSA algorithm")
> Cc: <[email protected]>
> Reported-by: Martin Townsend <[email protected]>
> Signed-off-by: Fabio Estevam <[email protected]>
> ---
> drivers/crypto/caam/caampkc.c | 43 +++++++++++++++++++++++++++++++++++--------
> 1 file changed, 35 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/crypto/caam/caampkc.c b/drivers/crypto/caam/caampkc.c
> index 7a897209..d2ad547 100644
> --- a/drivers/crypto/caam/caampkc.c
> +++ b/drivers/crypto/caam/caampkc.c
> @@ -166,6 +166,14 @@ static void rsa_priv_f3_done(struct device *dev, u32 *desc, u32 err,
> akcipher_request_complete(req, err);
> }
>
> +static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> +{
> + while (!**ptr && *nbytes) {
> + (*ptr)++;
> + (*nbytes)--;
> + }
> +}
> +
> static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
> size_t desclen)
> {
> @@ -178,7 +186,34 @@ static struct rsa_edesc *rsa_edesc_alloc(struct akcipher_request *req,
> int sgc;
> int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
> int src_nents, dst_nents;
> + const u8 *buffer;
> + size_t len;
> +
> + buffer = kzalloc(req->src_len, GFP_ATOMIC);
> + if (!buffer)
> + return ERR_PTR(-ENOMEM);
> +
> + sg_copy_to_buffer(req->src, sg_nents(req->src),
> + (void *)buffer, req->src_len);
> + len = req->src_len;
>
> + /*
> + * Check if the buffer contains leading zero and if
> + * it does, drop the leading zero
> + */
> + if (buffer[0] == 0) {
> + caam_rsa_drop_leading_zeros(&buffer, &len);
> + if (!buffer) {
This would free NULL, I would revert back to using a temp pointer
instead of passing &buffer to caam_rsa_drop_leading_zeros.
> + kfree(buffer);
> + return ERR_PTR(-ENOMEM);
> + }
> +
I would set req->src_len to len here and then we're covered if there
are more than 1 leading zero.
> + req->src_len -= 1;
> + sg_copy_from_buffer(req->src, sg_nents(req->src),
> + (void *)buffer, req->src_len);
> + }
> +
If we have a leading zero buffer will now point to a different memory
location than the one allocated, using temp as above should fix this.
> + kfree(buffer);
> src_nents = sg_nents_for_len(req->src, req->src_len);
> dst_nents = sg_nents_for_len(req->dst, req->dst_len);
>
> @@ -683,14 +718,6 @@ static void caam_rsa_free_key(struct caam_rsa_key *key)
> memset(key, 0, sizeof(*key));
> }
>
> -static void caam_rsa_drop_leading_zeros(const u8 **ptr, size_t *nbytes)
> -{
> - while (!**ptr && *nbytes) {
> - (*ptr)++;
> - (*nbytes)--;
> - }
> -}
> -
> /**
> * caam_read_rsa_crt - Used for reading dP, dQ, qInv CRT members.
> * dP, dQ and qInv could decode to less than corresponding p, q length, as the
> --
> 2.7.4
>
Fixing these things I have tested the patch on my board and have not
seen any issues yet and it has booted to the prompt and I've checked
/sys/kernel/security/ima/ascii_runtime_measurements and can see all
the files that have been measured. :)
Cheers, Martin.
Hi Martin,
On Sun, Apr 15, 2018 at 5:01 AM, Martin Townsend
<[email protected]> wrote:
> Fixing these things I have tested the patch on my board and have not
> seen any issues yet and it has booted to the prompt and I've checked
> /sys/kernel/security/ima/ascii_runtime_measurements and can see all
> the files that have been measured. :)
Thanks for your feedback.
I have just sent a v2 with your suggestions.
If it works well for you, please reply with your Tested-by tag.
Thanks