Add node for CAAM - Cryptographic Acceleration and Assurance Module.
Signed-off-by: Horia Geantă <[email protected]>
Signed-off-by: Andrey Smirnov <[email protected]>
Cc: Cory Tusar <[email protected]>
Cc: Chris Healy <[email protected]>
Cc: Lucas Stach <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Iuliana Prodan <[email protected]>
Cc: [email protected]
Cc: [email protected]
---
Shawn:
Just a bit of a context: as per this thread
https://lore.kernel.org/linux-crypto/[email protected]/
I am hoping I can get and Ack from you for this patch, so it can go
via cryptodev tree.
Thanks,
Andrey Smirnov
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 +++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d09b808eff87..752d5a61878c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -728,6 +728,36 @@
status = "disabled";
};
+ crypto: crypto@30900000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30900000 0x40000>;
+ ranges = <0 0x30900000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_AHB>,
+ <&clk IMX8MQ_CLK_IPG_ROOT>;
+ clock-names = "aclk", "ipg";
+
+ sec_jr0: jr@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@3000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x3000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
i2c1: i2c@30a20000 {
compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
reg = <0x30a20000 0x10000>;
--
2.21.0
On 8/31/2019 12:01 AM, Andrey Smirnov wrote:
> Add node for CAAM - Cryptographic Acceleration and Assurance Module.
>
> Signed-off-by: Horia Geant? <[email protected]>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Cc: Cory Tusar <[email protected]>
> Cc: Chris Healy <[email protected]>
> Cc: Lucas Stach <[email protected]>
> Cc: Herbert Xu <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Iuliana Prodan <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
>
> Shawn:
>
> Just a bit of a context: as per this thread
> https://lore.kernel.org/linux-crypto/[email protected]/
> I am hoping I can get and Ack from you for this patch, so it can go
> via cryptodev tree.
>
Could we please get an Ack in time for v5.4?
Thanks,
Horia
> Thanks,
> Andrey Smirnov
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 +++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808eff87..752d5a61878c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -728,6 +728,36 @@
> status = "disabled";
> };
>
> + crypto: crypto@30900000 {
> + compatible = "fsl,sec-v4.0";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x30900000 0x40000>;
> + ranges = <0 0x30900000 0x40000>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_IPG_ROOT>;
> + clock-names = "aclk", "ipg";
> +
> + sec_jr0: jr@1000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x1000 0x1000>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr@2000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x2000 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr2: jr@3000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x3000 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> i2c1: i2c@30a20000 {
> compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> reg = <0x30a20000 0x10000>;
>
On Fri, Aug 30, 2019 at 10:05 PM Andrey Smirnov
<[email protected]> wrote:
>
> Add node for CAAM - Cryptographic Acceleration and Assurance Module.
>
> Signed-off-by: Horia Geantă <[email protected]>
> Signed-off-by: Andrey Smirnov <[email protected]>
The patch itself looks good to me.
Acked-by: Li Yang <[email protected]>
> Cc: Cory Tusar <[email protected]>
> Cc: Chris Healy <[email protected]>
> Cc: Lucas Stach <[email protected]>
> Cc: Herbert Xu <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Iuliana Prodan <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
>
> Shawn:
>
> Just a bit of a context: as per this thread
> https://lore.kernel.org/linux-crypto/[email protected]/
> I am hoping I can get and Ack from you for this patch, so it can go
> via cryptodev tree.
The dts is describing the hardware and normally update to it shouldn't
break old drivers. Not sure if this time the dts change is depending
on driver change again? I remember previously arm-soc maintainer
prefer to have dts changes merged with soc trees as a common practice.
Regards,
Leo
>
> Thanks,
> Andrey Smirnov
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 +++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> index d09b808eff87..752d5a61878c 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> @@ -728,6 +728,36 @@
> status = "disabled";
> };
>
> + crypto: crypto@30900000 {
> + compatible = "fsl,sec-v4.0";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x30900000 0x40000>;
> + ranges = <0 0x30900000 0x40000>;
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MQ_CLK_AHB>,
> + <&clk IMX8MQ_CLK_IPG_ROOT>;
> + clock-names = "aclk", "ipg";
> +
> + sec_jr0: jr@1000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x1000 0x1000>;
> + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr1: jr@2000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x2000 0x1000>;
> + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + sec_jr2: jr@3000 {
> + compatible = "fsl,sec-v4.0-job-ring";
> + reg = <0x3000 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +
> i2c1: i2c@30a20000 {
> compatible = "fsl,imx8mq-i2c", "fsl,imx21-i2c";
> reg = <0x30a20000 0x10000>;
> --
> 2.21.0
>
--
- Leo
On Fri, Aug 30, 2019 at 02:01:39PM -0700, Andrey Smirnov wrote:
> Add node for CAAM - Cryptographic Acceleration and Assurance Module.
>
> Signed-off-by: Horia Geantă <[email protected]>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Cc: Cory Tusar <[email protected]>
> Cc: Chris Healy <[email protected]>
> Cc: Lucas Stach <[email protected]>
> Cc: Herbert Xu <[email protected]>
> Cc: Shawn Guo <[email protected]>
> Cc: Iuliana Prodan <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> ---
>
> Shawn:
>
> Just a bit of a context: as per this thread
> https://lore.kernel.org/linux-crypto/[email protected]/
> I am hoping I can get and Ack from you for this patch, so it can go
> via cryptodev tree.
>
> Thanks,
> Andrey Smirnov
>
> arch/arm64/boot/dts/freescale/imx8mq.dtsi | 30 +++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
Patch applied. Thanks.
--
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt