2017-10-17 11:28:22

by Kamil Konieczny

[permalink] [raw]
Subject: [PATCH v7 0/2] crypto: s5p-sss: Add HASH support for Exynos

First patch cleans up spaces in defines, second adds HASH support for Exynos.
Changes:

version 7:
- fix ifdef into if(IS_ENABLED()) as suggested by Krzysztof Kozlowski

version 6:
- fixes suggested by Vladimir Zapolskiy: change HASH_OP enum into bool, fix
comments, change int into unsigned int in several functions, change some
functions to return void, remove unnecessary parentheses in s5p_hash_import,
replace rctx with ctx for request context, drop some dd vars and use tctx->dd
instead, simplify s5p_hash_rx, s5p_hash_copy_result and s5p_hash_set_flow,
change int final into bool final, reoder some declarations, split patch into
two
- rewrite and fix while loop in s5p_hash_copy_sg_lists
- rewrite while loop in s5p_hash_prepare_sgs

version 5:
- fix suggested by Krzysztof Kozlowski: change defines HASH_OP into enum, fix
comments

version 4:
- fixes suggested by Krzysztof Kozlowski: reformat comments, convert context
flags into two bool vars, drop SSS_ALIGNED, change name of SSS_DMA_ALIGN and
SSS_DMA_ALIGN_MASK, split assignments into separate lines, use IS_ENABLED in
place of ifdef, remove sss_hash_algs_info and simplify register and deregister
HASH algs

version 3:
- many fixes suggested by Krzysztof Kozlowski: comments, uppercases in const,
remove unused defines, remove unused variable bs, constify aes_variant,
remove global var use_hash, remove WARN_ON, improve hash_import(),
change goto label into 'out' in s5p_hash_handle_queue(), reorder variable
declarations, add spinlock to protect clearing HASH_FLAGS_BUSY
- simplify code: replace one-line functions s5p_hash_update_req(),
s5p_hash_final_req() with call to s5p_hash_xmit_dma(), and delete them
- replace call to s5p_hash_hw_init() into s5p_ahash_dma_init() and delete it
- fix clearing shash flag CRYPTO_TFM_REQ_MAY_SLEEP
- fix s5p_hash_set_flow()

version 2:
- change patch format so number of lines drops
- change in Kconfig as suggested by Krzysztof Kozlowski, add
EXYNOS_HASH subsection
- change #ifndef EXYNOS_RNG into #ifdef CRYPTO_DEV_EXYNOS_HASH
- remove style fixups in aes, as they should go in separate patch
- remove FLOW_LOG, FLOW_DUMP macros and its uses
- remove #if 0 ... endif
- remove unused function hash_wait and its defines
- fix compiler warning in dev_dbg
- remove some comments
- other minor fixes in comments

Kamil Konieczny (2):
change spaces into tabs in defines
Add HASH support for Exynos

drivers/crypto/Kconfig | 14 +
drivers/crypto/s5p-sss.c | 1597 +++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 1506 insertions(+), 105 deletions(-)

--
2.14.1.536.g6867272d5b56


2017-10-17 11:28:49

by Kamil Konieczny

[permalink] [raw]
Subject: [PATCH v7 1/2] crypto: s5p-sss: change spaces into tabs in defines

change spaces into tabs in defines

Signed-off-by: Kamil Konieczny <[email protected]>
---
drivers/crypto/s5p-sss.c | 190 +++++++++++++++++++++++------------------------
1 file changed, 95 insertions(+), 95 deletions(-)

diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index 7ac657f46d15..dfae1865c384 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -30,98 +30,98 @@
#include <crypto/algapi.h>
#include <crypto/scatterwalk.h>

-#define _SBF(s, v) ((v) << (s))
+#define _SBF(s, v) ((v) << (s))

/* Feed control registers */
-#define SSS_REG_FCINTSTAT 0x0000
-#define SSS_FCINTSTAT_BRDMAINT BIT(3)
-#define SSS_FCINTSTAT_BTDMAINT BIT(2)
-#define SSS_FCINTSTAT_HRDMAINT BIT(1)
-#define SSS_FCINTSTAT_PKDMAINT BIT(0)
-
-#define SSS_REG_FCINTENSET 0x0004
-#define SSS_FCINTENSET_BRDMAINTENSET BIT(3)
-#define SSS_FCINTENSET_BTDMAINTENSET BIT(2)
-#define SSS_FCINTENSET_HRDMAINTENSET BIT(1)
-#define SSS_FCINTENSET_PKDMAINTENSET BIT(0)
-
-#define SSS_REG_FCINTENCLR 0x0008
-#define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3)
-#define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2)
-#define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1)
-#define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0)
-
-#define SSS_REG_FCINTPEND 0x000C
-#define SSS_FCINTPEND_BRDMAINTP BIT(3)
-#define SSS_FCINTPEND_BTDMAINTP BIT(2)
-#define SSS_FCINTPEND_HRDMAINTP BIT(1)
-#define SSS_FCINTPEND_PKDMAINTP BIT(0)
-
-#define SSS_REG_FCFIFOSTAT 0x0010
-#define SSS_FCFIFOSTAT_BRFIFOFUL BIT(7)
-#define SSS_FCFIFOSTAT_BRFIFOEMP BIT(6)
-#define SSS_FCFIFOSTAT_BTFIFOFUL BIT(5)
-#define SSS_FCFIFOSTAT_BTFIFOEMP BIT(4)
-#define SSS_FCFIFOSTAT_HRFIFOFUL BIT(3)
-#define SSS_FCFIFOSTAT_HRFIFOEMP BIT(2)
-#define SSS_FCFIFOSTAT_PKFIFOFUL BIT(1)
-#define SSS_FCFIFOSTAT_PKFIFOEMP BIT(0)
-
-#define SSS_REG_FCFIFOCTRL 0x0014
-#define SSS_FCFIFOCTRL_DESSEL BIT(2)
-#define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00)
-#define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01)
-#define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02)
-
-#define SSS_REG_FCBRDMAS 0x0020
-#define SSS_REG_FCBRDMAL 0x0024
-#define SSS_REG_FCBRDMAC 0x0028
-#define SSS_FCBRDMAC_BYTESWAP BIT(1)
-#define SSS_FCBRDMAC_FLUSH BIT(0)
-
-#define SSS_REG_FCBTDMAS 0x0030
-#define SSS_REG_FCBTDMAL 0x0034
-#define SSS_REG_FCBTDMAC 0x0038
-#define SSS_FCBTDMAC_BYTESWAP BIT(1)
-#define SSS_FCBTDMAC_FLUSH BIT(0)
-
-#define SSS_REG_FCHRDMAS 0x0040
-#define SSS_REG_FCHRDMAL 0x0044
-#define SSS_REG_FCHRDMAC 0x0048
-#define SSS_FCHRDMAC_BYTESWAP BIT(1)
-#define SSS_FCHRDMAC_FLUSH BIT(0)
-
-#define SSS_REG_FCPKDMAS 0x0050
-#define SSS_REG_FCPKDMAL 0x0054
-#define SSS_REG_FCPKDMAC 0x0058
-#define SSS_FCPKDMAC_BYTESWAP BIT(3)
-#define SSS_FCPKDMAC_DESCEND BIT(2)
-#define SSS_FCPKDMAC_TRANSMIT BIT(1)
-#define SSS_FCPKDMAC_FLUSH BIT(0)
-
-#define SSS_REG_FCPKDMAO 0x005C
+#define SSS_REG_FCINTSTAT 0x0000
+#define SSS_FCINTSTAT_BRDMAINT BIT(3)
+#define SSS_FCINTSTAT_BTDMAINT BIT(2)
+#define SSS_FCINTSTAT_HRDMAINT BIT(1)
+#define SSS_FCINTSTAT_PKDMAINT BIT(0)
+
+#define SSS_REG_FCINTENSET 0x0004
+#define SSS_FCINTENSET_BRDMAINTENSET BIT(3)
+#define SSS_FCINTENSET_BTDMAINTENSET BIT(2)
+#define SSS_FCINTENSET_HRDMAINTENSET BIT(1)
+#define SSS_FCINTENSET_PKDMAINTENSET BIT(0)
+
+#define SSS_REG_FCINTENCLR 0x0008
+#define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3)
+#define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2)
+#define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1)
+#define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0)
+
+#define SSS_REG_FCINTPEND 0x000C
+#define SSS_FCINTPEND_BRDMAINTP BIT(3)
+#define SSS_FCINTPEND_BTDMAINTP BIT(2)
+#define SSS_FCINTPEND_HRDMAINTP BIT(1)
+#define SSS_FCINTPEND_PKDMAINTP BIT(0)
+
+#define SSS_REG_FCFIFOSTAT 0x0010
+#define SSS_FCFIFOSTAT_BRFIFOFUL BIT(7)
+#define SSS_FCFIFOSTAT_BRFIFOEMP BIT(6)
+#define SSS_FCFIFOSTAT_BTFIFOFUL BIT(5)
+#define SSS_FCFIFOSTAT_BTFIFOEMP BIT(4)
+#define SSS_FCFIFOSTAT_HRFIFOFUL BIT(3)
+#define SSS_FCFIFOSTAT_HRFIFOEMP BIT(2)
+#define SSS_FCFIFOSTAT_PKFIFOFUL BIT(1)
+#define SSS_FCFIFOSTAT_PKFIFOEMP BIT(0)
+
+#define SSS_REG_FCFIFOCTRL 0x0014
+#define SSS_FCFIFOCTRL_DESSEL BIT(2)
+#define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00)
+#define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01)
+#define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02)
+
+#define SSS_REG_FCBRDMAS 0x0020
+#define SSS_REG_FCBRDMAL 0x0024
+#define SSS_REG_FCBRDMAC 0x0028
+#define SSS_FCBRDMAC_BYTESWAP BIT(1)
+#define SSS_FCBRDMAC_FLUSH BIT(0)
+
+#define SSS_REG_FCBTDMAS 0x0030
+#define SSS_REG_FCBTDMAL 0x0034
+#define SSS_REG_FCBTDMAC 0x0038
+#define SSS_FCBTDMAC_BYTESWAP BIT(1)
+#define SSS_FCBTDMAC_FLUSH BIT(0)
+
+#define SSS_REG_FCHRDMAS 0x0040
+#define SSS_REG_FCHRDMAL 0x0044
+#define SSS_REG_FCHRDMAC 0x0048
+#define SSS_FCHRDMAC_BYTESWAP BIT(1)
+#define SSS_FCHRDMAC_FLUSH BIT(0)
+
+#define SSS_REG_FCPKDMAS 0x0050
+#define SSS_REG_FCPKDMAL 0x0054
+#define SSS_REG_FCPKDMAC 0x0058
+#define SSS_FCPKDMAC_BYTESWAP BIT(3)
+#define SSS_FCPKDMAC_DESCEND BIT(2)
+#define SSS_FCPKDMAC_TRANSMIT BIT(1)
+#define SSS_FCPKDMAC_FLUSH BIT(0)
+
+#define SSS_REG_FCPKDMAO 0x005C

/* AES registers */
#define SSS_REG_AES_CONTROL 0x00
-#define SSS_AES_BYTESWAP_DI BIT(11)
-#define SSS_AES_BYTESWAP_DO BIT(10)
-#define SSS_AES_BYTESWAP_IV BIT(9)
-#define SSS_AES_BYTESWAP_CNT BIT(8)
-#define SSS_AES_BYTESWAP_KEY BIT(7)
-#define SSS_AES_KEY_CHANGE_MODE BIT(6)
-#define SSS_AES_KEY_SIZE_128 _SBF(4, 0x00)
-#define SSS_AES_KEY_SIZE_192 _SBF(4, 0x01)
-#define SSS_AES_KEY_SIZE_256 _SBF(4, 0x02)
-#define SSS_AES_FIFO_MODE BIT(3)
-#define SSS_AES_CHAIN_MODE_ECB _SBF(1, 0x00)
-#define SSS_AES_CHAIN_MODE_CBC _SBF(1, 0x01)
-#define SSS_AES_CHAIN_MODE_CTR _SBF(1, 0x02)
-#define SSS_AES_MODE_DECRYPT BIT(0)
+#define SSS_AES_BYTESWAP_DI BIT(11)
+#define SSS_AES_BYTESWAP_DO BIT(10)
+#define SSS_AES_BYTESWAP_IV BIT(9)
+#define SSS_AES_BYTESWAP_CNT BIT(8)
+#define SSS_AES_BYTESWAP_KEY BIT(7)
+#define SSS_AES_KEY_CHANGE_MODE BIT(6)
+#define SSS_AES_KEY_SIZE_128 _SBF(4, 0x00)
+#define SSS_AES_KEY_SIZE_192 _SBF(4, 0x01)
+#define SSS_AES_KEY_SIZE_256 _SBF(4, 0x02)
+#define SSS_AES_FIFO_MODE BIT(3)
+#define SSS_AES_CHAIN_MODE_ECB _SBF(1, 0x00)
+#define SSS_AES_CHAIN_MODE_CBC _SBF(1, 0x01)
+#define SSS_AES_CHAIN_MODE_CTR _SBF(1, 0x02)
+#define SSS_AES_MODE_DECRYPT BIT(0)

#define SSS_REG_AES_STATUS 0x04
-#define SSS_AES_BUSY BIT(2)
-#define SSS_AES_INPUT_READY BIT(1)
-#define SSS_AES_OUTPUT_READY BIT(0)
+#define SSS_AES_BUSY BIT(2)
+#define SSS_AES_INPUT_READY BIT(1)
+#define SSS_AES_OUTPUT_READY BIT(0)

#define SSS_REG_AES_IN_DATA(s) (0x10 + (s << 2))
#define SSS_REG_AES_OUT_DATA(s) (0x20 + (s << 2))
@@ -129,22 +129,22 @@
#define SSS_REG_AES_CNT_DATA(s) (0x40 + (s << 2))
#define SSS_REG_AES_KEY_DATA(s) (0x80 + (s << 2))

-#define SSS_REG(dev, reg) ((dev)->ioaddr + (SSS_REG_##reg))
-#define SSS_READ(dev, reg) __raw_readl(SSS_REG(dev, reg))
-#define SSS_WRITE(dev, reg, val) __raw_writel((val), SSS_REG(dev, reg))
+#define SSS_REG(dev, reg) ((dev)->ioaddr + (SSS_REG_##reg))
+#define SSS_READ(dev, reg) __raw_readl(SSS_REG(dev, reg))
+#define SSS_WRITE(dev, reg, val) __raw_writel((val), SSS_REG(dev, reg))

-#define SSS_AES_REG(dev, reg) ((dev)->aes_ioaddr + SSS_REG_##reg)
+#define SSS_AES_REG(dev, reg) ((dev)->aes_ioaddr + SSS_REG_##reg)
#define SSS_AES_WRITE(dev, reg, val) __raw_writel((val), \
SSS_AES_REG(dev, reg))

/* HW engine modes */
-#define FLAGS_AES_DECRYPT BIT(0)
-#define FLAGS_AES_MODE_MASK _SBF(1, 0x03)
-#define FLAGS_AES_CBC _SBF(1, 0x01)
-#define FLAGS_AES_CTR _SBF(1, 0x02)
+#define FLAGS_AES_DECRYPT BIT(0)
+#define FLAGS_AES_MODE_MASK _SBF(1, 0x03)
+#define FLAGS_AES_CBC _SBF(1, 0x01)
+#define FLAGS_AES_CTR _SBF(1, 0x02)

-#define AES_KEY_LEN 16
-#define CRYPTO_QUEUE_LEN 1
+#define AES_KEY_LEN 16
+#define CRYPTO_QUEUE_LEN 1

/**
* struct samsung_aes_variant - platform specific SSS driver data
--
2.14.1.536.g6867272d5b56

2017-10-17 11:28:24

by Kamil Konieczny

[permalink] [raw]
Subject: [PATCH v7 2/2] crypto: s5p-sss: Add HASH support for Exynos

Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
It uses the crypto framework asynchronous hash api.
It is based on omap-sham.c driver.
S5P has some HW differencies and is not implemented.

Modifications in s5p-sss:

- Add hash supporting structures and functions.

- Modify irq handler to handle both aes and hash signals.

- Resize resource end in probe if EXYNOS_HASH is enabled in
Kconfig.

- Add new copyright line and new author.

- Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
with crypto run-time self test testmgr
and with tcrypt module with: modprobe tcrypt sec=1 mode=N
where N=402, 403, 404 (MD5, SHA1, SHA256).

Modifications in drivers/crypto/Kconfig:

- Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
and CRYPTO_DEV_S5P

- Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
as they are nedded for fallback.

Signed-off-by: Kamil Konieczny <[email protected]>
---
drivers/crypto/Kconfig | 14 +
drivers/crypto/s5p-sss.c | 1407 +++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 1411 insertions(+), 10 deletions(-)

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 4b75084fabad..dea4d33d9c7f 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -439,6 +439,20 @@ config CRYPTO_DEV_S5P
Select this to offload Samsung S5PV210 or S5PC110, Exynos from AES
algorithms execution.

+config CRYPTO_DEV_EXYNOS_HASH
+ bool "Support for Samsung Exynos HASH accelerator"
+ depends on CRYPTO_DEV_S5P
+ depends on !CRYPTO_DEV_EXYNOS_RNG && CRYPTO_DEV_EXYNOS_RNG!=m
+ select CRYPTO_SHA1
+ select CRYPTO_MD5
+ select CRYPTO_SHA256
+ help
+ Select this to offload Exynos from HASH MD5/SHA1/SHA256.
+ This will select software SHA1, MD5 and SHA256 as they are
+ needed for small and zero-size messages.
+ HASH algorithms will be disabled if EXYNOS_RNG
+ is enabled due to hw conflict.
+
config CRYPTO_DEV_NX
bool "Support for IBM PowerPC Nest (NX) cryptographic acceleration"
depends on PPC64
diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
index dfae1865c384..c9feccf21efe 100644
--- a/drivers/crypto/s5p-sss.c
+++ b/drivers/crypto/s5p-sss.c
@@ -1,18 +1,21 @@
/*
* Cryptographic API.
*
- * Support for Samsung S5PV210 HW acceleration.
+ * Support for Samsung S5PV210 and Exynos HW acceleration.
*
* Copyright (C) 2011 NetUP Inc. All rights reserved.
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
+ * Hash part based on omap-sham.c driver.
*/

#include <linux/clk.h>
#include <linux/crypto.h>
+#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/errno.h>
@@ -30,28 +33,41 @@
#include <crypto/algapi.h>
#include <crypto/scatterwalk.h>

+#include <crypto/hash.h>
+#include <crypto/md5.h>
+#include <crypto/sha.h>
+#include <crypto/internal/hash.h>
+
#define _SBF(s, v) ((v) << (s))

/* Feed control registers */
#define SSS_REG_FCINTSTAT 0x0000
+#define SSS_FCINTSTAT_HPARTINT BIT(7)
+#define SSS_FCINTSTAT_HDONEINT BIT(5)
#define SSS_FCINTSTAT_BRDMAINT BIT(3)
#define SSS_FCINTSTAT_BTDMAINT BIT(2)
#define SSS_FCINTSTAT_HRDMAINT BIT(1)
#define SSS_FCINTSTAT_PKDMAINT BIT(0)

#define SSS_REG_FCINTENSET 0x0004
+#define SSS_FCINTENSET_HPARTINTENSET BIT(7)
+#define SSS_FCINTENSET_HDONEINTENSET BIT(5)
#define SSS_FCINTENSET_BRDMAINTENSET BIT(3)
#define SSS_FCINTENSET_BTDMAINTENSET BIT(2)
#define SSS_FCINTENSET_HRDMAINTENSET BIT(1)
#define SSS_FCINTENSET_PKDMAINTENSET BIT(0)

#define SSS_REG_FCINTENCLR 0x0008
+#define SSS_FCINTENCLR_HPARTINTENCLR BIT(7)
+#define SSS_FCINTENCLR_HDONEINTENCLR BIT(5)
#define SSS_FCINTENCLR_BRDMAINTENCLR BIT(3)
#define SSS_FCINTENCLR_BTDMAINTENCLR BIT(2)
#define SSS_FCINTENCLR_HRDMAINTENCLR BIT(1)
#define SSS_FCINTENCLR_PKDMAINTENCLR BIT(0)

#define SSS_REG_FCINTPEND 0x000C
+#define SSS_FCINTPEND_HPARTINTP BIT(7)
+#define SSS_FCINTPEND_HDONEINTP BIT(5)
#define SSS_FCINTPEND_BRDMAINTP BIT(3)
#define SSS_FCINTPEND_BTDMAINTP BIT(2)
#define SSS_FCINTPEND_HRDMAINTP BIT(1)
@@ -72,6 +88,7 @@
#define SSS_HASHIN_INDEPENDENT _SBF(0, 0x00)
#define SSS_HASHIN_CIPHER_INPUT _SBF(0, 0x01)
#define SSS_HASHIN_CIPHER_OUTPUT _SBF(0, 0x02)
+#define SSS_HASHIN_MASK _SBF(0, 0x03)

#define SSS_REG_FCBRDMAS 0x0020
#define SSS_REG_FCBRDMAL 0x0024
@@ -146,9 +163,80 @@
#define AES_KEY_LEN 16
#define CRYPTO_QUEUE_LEN 1

+/* HASH registers */
+#define SSS_REG_HASH_CTRL 0x00
+
+#define SSS_HASH_USER_IV_EN BIT(5)
+#define SSS_HASH_INIT_BIT BIT(4)
+#define SSS_HASH_ENGINE_SHA1 _SBF(1, 0x00)
+#define SSS_HASH_ENGINE_MD5 _SBF(1, 0x01)
+#define SSS_HASH_ENGINE_SHA256 _SBF(1, 0x02)
+
+#define SSS_HASH_ENGINE_MASK _SBF(1, 0x03)
+
+#define SSS_REG_HASH_CTRL_PAUSE 0x04
+
+#define SSS_HASH_PAUSE BIT(0)
+
+#define SSS_REG_HASH_CTRL_FIFO 0x08
+
+#define SSS_HASH_FIFO_MODE_DMA BIT(0)
+#define SSS_HASH_FIFO_MODE_CPU 0
+
+#define SSS_REG_HASH_CTRL_SWAP 0x0C
+
+#define SSS_HASH_BYTESWAP_DI BIT(3)
+#define SSS_HASH_BYTESWAP_DO BIT(2)
+#define SSS_HASH_BYTESWAP_IV BIT(1)
+#define SSS_HASH_BYTESWAP_KEY BIT(0)
+
+#define SSS_REG_HASH_STATUS 0x10
+
+#define SSS_HASH_STATUS_MSG_DONE BIT(6)
+#define SSS_HASH_STATUS_PARTIAL_DONE BIT(4)
+#define SSS_HASH_STATUS_BUFFER_READY BIT(0)
+
+#define SSS_REG_HASH_MSG_SIZE_LOW 0x20
+#define SSS_REG_HASH_MSG_SIZE_HIGH 0x24
+
+#define SSS_REG_HASH_PRE_MSG_SIZE_LOW 0x28
+#define SSS_REG_HASH_PRE_MSG_SIZE_HIGH 0x2C
+
+#define SSS_REG_HASH_IV(s) (0xB0 + ((s) << 2))
+#define SSS_REG_HASH_OUT(s) (0x100 + ((s) << 2))
+
+#define HASH_BLOCK_SIZE 64
+#define HASH_REG_SIZEOF 4
+#define HASH_MD5_MAX_REG (MD5_DIGEST_SIZE / HASH_REG_SIZEOF)
+#define HASH_SHA1_MAX_REG (SHA1_DIGEST_SIZE / HASH_REG_SIZEOF)
+#define HASH_SHA256_MAX_REG (SHA256_DIGEST_SIZE / HASH_REG_SIZEOF)
+
+/*
+ * HASH bit numbers, used by device, setting in dev->hash_flags with
+ * functions set_bit(), clear_bit() or tested with test_bit() or BIT(),
+ * to keep HASH state BUSY or FREE, or to signal state from irq_handler
+ * to hash_tasklet. SGS keep track of allocated memory for scatterlist
+ */
+#define HASH_FLAGS_BUSY 0
+#define HASH_FLAGS_FINAL 1
+#define HASH_FLAGS_DMA_ACTIVE 2
+#define HASH_FLAGS_OUTPUT_READY 3
+#define HASH_FLAGS_DMA_READY 4
+#define HASH_FLAGS_SGS_COPIED 5
+#define HASH_FLAGS_SGS_ALLOCED 6
+
+/* HASH HW constants */
+#define BUFLEN HASH_BLOCK_SIZE
+
+#define SSS_HASH_DMA_LEN_ALIGN 8
+#define SSS_HASH_DMA_ALIGN_MASK (SSS_HASH_DMA_LEN_ALIGN - 1)
+
+#define SSS_HASH_QUEUE_LENGTH 10
+
/**
* struct samsung_aes_variant - platform specific SSS driver data
* @aes_offset: AES register offset from SSS module's base.
+ * @hash_offset: HASH register offset from SSS module's base.
*
* Specifies platform specific configuration of SSS module.
* Note: A structure for driver specific platform data is used for future
@@ -156,6 +244,7 @@
*/
struct samsung_aes_variant {
unsigned int aes_offset;
+ unsigned int hash_offset;
};

struct s5p_aes_reqctx {
@@ -195,6 +284,19 @@ struct s5p_aes_ctx {
* protects against concurrent access to these fields.
* @lock: Lock for protecting both access to device hardware registers
* and fields related to current request (including the busy field).
+ * @res: Resources for hash.
+ * @io_hash_base: Per-variant offset for HASH block IO memory.
+ * @hash_lock: Lock for protecting hash_req, hash_queue and hash_flags
+ * variable.
+ * @hash_flags: Flags for current HASH op.
+ * @hash_queue: Async hash queue.
+ * @hash_tasklet: New HASH request scheduling job.
+ * @xmit_buf: Buffer for current HASH request transfer into SSS block.
+ * @hash_req: Current request sending to SSS HASH block.
+ * @hash_sg_iter: Scatterlist transferred through DMA into SSS HASH block.
+ * @hash_sg_cnt: Counter for hash_sg_iter.
+ *
+ * @use_hash: true if HASH algs enabled
*/
struct s5p_aes_dev {
struct device *dev;
@@ -215,16 +317,83 @@ struct s5p_aes_dev {
struct crypto_queue queue;
bool busy;
spinlock_t lock;
+
+ struct resource *res;
+ void __iomem *io_hash_base;
+
+ spinlock_t hash_lock; /* protect hash_ vars */
+ unsigned long hash_flags;
+ struct crypto_queue hash_queue;
+ struct tasklet_struct hash_tasklet;
+
+ u8 xmit_buf[BUFLEN];
+ struct ahash_request *hash_req;
+ struct scatterlist *hash_sg_iter;
+ unsigned int hash_sg_cnt;
+
+ bool use_hash;
};

-static struct s5p_aes_dev *s5p_dev;
+/**
+ * struct s5p_hash_reqctx - HASH request context
+ * @dev: Associated device
+ * @op_update: Current request operation (OP_UPDATE or OP_FINAL)
+ * @digcnt: Number of bytes processed by HW (without buffer[] ones)
+ * @digest: Digest message or IV for partial result
+ * @nregs: Number of HW registers for digest or IV read/write
+ * @engine: Bits for selecting type of HASH in SSS block
+ * @sg: sg for DMA transfer
+ * @sg_len: Length of sg for DMA transfer
+ * @sgl[]: sg for joining buffer and req->src scatterlist
+ * @skip: Skip offset in req->src for current op
+ * @total: Total number of bytes for current request
+ * @finup: Keep state for finup or final.
+ * @error: Keep track of error.
+ * @bufcnt: Number of bytes holded in buffer[]
+ * @buffer[]: For byte(s) from end of req->src in UPDATE op
+ */
+struct s5p_hash_reqctx {
+ struct s5p_aes_dev *dd;
+ bool op_update;
+
+ u64 digcnt;
+ u8 digest[SHA256_DIGEST_SIZE];
+
+ unsigned int nregs; /* digest_size / sizeof(reg) */
+ u32 engine;
+
+ struct scatterlist *sg;
+ unsigned int sg_len;
+ struct scatterlist sgl[2];
+ unsigned int skip;
+ unsigned int total;
+ bool finup;
+ bool error;
+
+ u32 bufcnt;
+ u8 buffer[0];
+};
+
+/**
+ * struct s5p_hash_ctx - HASH transformation context
+ * @dd: Associated device
+ * @flags: Bits for algorithm HASH.
+ * @fallback: Software transformation for zero message or size < BUFLEN.
+ */
+struct s5p_hash_ctx {
+ struct s5p_aes_dev *dd;
+ unsigned long flags;
+ struct crypto_shash *fallback;
+};

static const struct samsung_aes_variant s5p_aes_data = {
.aes_offset = 0x4000,
+ .hash_offset = 0x6000,
};

static const struct samsung_aes_variant exynos_aes_data = {
.aes_offset = 0x200,
+ .hash_offset = 0x400,
};

static const struct of_device_id s5p_sss_dt_match[] = {
@@ -254,6 +423,8 @@ static inline struct samsung_aes_variant *find_s5p_sss_version
platform_get_device_id(pdev)->driver_data;
}

+static struct s5p_aes_dev *s5p_dev;
+
static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
{
SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
@@ -436,15 +607,65 @@ static int s5p_aes_rx(struct s5p_aes_dev *dev/*, bool *set_dma*/)
return ret;
}

+static inline u32 s5p_hash_read(struct s5p_aes_dev *dd, u32 offset)
+{
+ return __raw_readl(dd->io_hash_base + offset);
+}
+
+static inline void s5p_hash_write(struct s5p_aes_dev *dd,
+ u32 offset, u32 value)
+{
+ __raw_writel(value, dd->io_hash_base + offset);
+}
+
+/**
+ * s5p_set_dma_hashdata() - start DMA with sg
+ * @dev: device
+ * @sg: scatterlist ready to DMA transmit
+ */
+static void s5p_set_dma_hashdata(struct s5p_aes_dev *dev,
+ struct scatterlist *sg)
+{
+ dev->hash_sg_cnt--;
+ SSS_WRITE(dev, FCHRDMAS, sg_dma_address(sg));
+ SSS_WRITE(dev, FCHRDMAL, sg_dma_len(sg)); /* DMA starts */
+}
+
+/**
+ * s5p_hash_rx() - get next hash_sg_iter
+ * @dev: device
+ *
+ * Return:
+ * 2 if there is no more data and it is UPDATE op
+ * 1 if new receiving (input) data is ready and can be written to device
+ * 0 if there is no more data and it is FINAL op
+ */
+static int s5p_hash_rx(struct s5p_aes_dev *dev)
+{
+ if (dev->hash_sg_cnt > 0) {
+ dev->hash_sg_iter = sg_next(dev->hash_sg_iter);
+ return 1;
+ }
+
+ set_bit(HASH_FLAGS_DMA_READY, &dev->hash_flags);
+ if (test_bit(HASH_FLAGS_FINAL, &dev->hash_flags))
+ return 0;
+
+ return 2;
+}
+
static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct s5p_aes_dev *dev = platform_get_drvdata(pdev);
int err_dma_tx = 0;
int err_dma_rx = 0;
+ int err_dma_hx = 0;
bool tx_end = false;
+ bool hx_end = false;
unsigned long flags;
uint32_t status;
+ u32 st_bits;
int err;

spin_lock_irqsave(&dev->lock, flags);
@@ -456,6 +677,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
*
* If there is no more data in tx scatter list, call s5p_aes_complete()
* and schedule new tasklet.
+ *
+ * Handle hx interrupt. If there is still data map next entry.
*/
status = SSS_READ(dev, FCINTSTAT);
if (status & SSS_FCINTSTAT_BRDMAINT)
@@ -467,7 +690,29 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
err_dma_tx = s5p_aes_tx(dev);
}

- SSS_WRITE(dev, FCINTPEND, status);
+ if (status & SSS_FCINTSTAT_HRDMAINT)
+ err_dma_hx = s5p_hash_rx(dev);
+
+ st_bits = status & (SSS_FCINTSTAT_BRDMAINT | SSS_FCINTSTAT_BTDMAINT |
+ SSS_FCINTSTAT_HRDMAINT);
+ /* clear DMA bits */
+ SSS_WRITE(dev, FCINTPEND, st_bits);
+
+ /* clear HASH irq bits */
+ if (status & (SSS_FCINTSTAT_HDONEINT | SSS_FCINTSTAT_HPARTINT)) {
+ /* cannot have both HPART and HDONE */
+ if (status & SSS_FCINTSTAT_HPARTINT)
+ st_bits = SSS_HASH_STATUS_PARTIAL_DONE;
+
+ if (status & SSS_FCINTSTAT_HDONEINT)
+ st_bits = SSS_HASH_STATUS_MSG_DONE;
+
+ set_bit(HASH_FLAGS_OUTPUT_READY, &dev->hash_flags);
+ s5p_hash_write(dev, SSS_REG_HASH_STATUS, st_bits);
+ hx_end = true;
+ /* when DONE or PART, do not handle HASH DMA */
+ err_dma_hx = 0;
+ }

if (err_dma_rx < 0) {
err = err_dma_rx;
@@ -480,6 +725,8 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)

if (tx_end) {
s5p_sg_done(dev);
+ if (err_dma_hx == 1)
+ s5p_set_dma_hashdata(dev, dev->hash_sg_iter);

spin_unlock_irqrestore(&dev->lock, flags);

@@ -497,21 +744,1100 @@ static irqreturn_t s5p_aes_interrupt(int irq, void *dev_id)
s5p_set_dma_outdata(dev, dev->sg_dst);
if (err_dma_rx == 1)
s5p_set_dma_indata(dev, dev->sg_src);
+ if (err_dma_hx == 1)
+ s5p_set_dma_hashdata(dev, dev->hash_sg_iter);

spin_unlock_irqrestore(&dev->lock, flags);
}

- return IRQ_HANDLED;
+ goto hash_irq_end;

error:
s5p_sg_done(dev);
dev->busy = false;
+ if (err_dma_hx == 1)
+ s5p_set_dma_hashdata(dev, dev->hash_sg_iter);
+
spin_unlock_irqrestore(&dev->lock, flags);
s5p_aes_complete(dev, err);

+hash_irq_end:
+ /*
+ * Note about else if:
+ * when hash_sg_iter reaches end and its UPDATE op,
+ * issue SSS_HASH_PAUSE and wait for HPART irq
+ */
+ if (hx_end)
+ tasklet_schedule(&dev->hash_tasklet);
+ else if (err_dma_hx == 2)
+ s5p_hash_write(dev, SSS_REG_HASH_CTRL_PAUSE,
+ SSS_HASH_PAUSE);
+
return IRQ_HANDLED;
}

+/**
+ * s5p_hash_read_msg() - read message or IV from HW
+ * @req: AHASH request
+ */
+static void s5p_hash_read_msg(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct s5p_aes_dev *dd = ctx->dd;
+ u32 *hash = (u32 *)ctx->digest;
+ unsigned int i;
+
+ for (i = 0; i < ctx->nregs; i++)
+ hash[i] = s5p_hash_read(dd, SSS_REG_HASH_OUT(i));
+}
+
+/**
+ * s5p_hash_write_ctx_iv() - write IV for next partial/finup op.
+ * @dd: device
+ * @ctx: request context
+ */
+static void s5p_hash_write_ctx_iv(struct s5p_aes_dev *dd,
+ struct s5p_hash_reqctx *ctx)
+{
+ u32 *hash = (u32 *)ctx->digest;
+ unsigned int i;
+
+ for (i = 0; i < ctx->nregs; i++)
+ s5p_hash_write(dd, SSS_REG_HASH_IV(i), hash[i]);
+}
+
+/**
+ * s5p_hash_write_iv() - write IV for next partial/finup op.
+ * @req: AHASH request
+ */
+static void s5p_hash_write_iv(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ s5p_hash_write_ctx_iv(ctx->dd, ctx);
+}
+
+/**
+ * s5p_hash_copy_result() - copy digest into req->result
+ * @req: AHASH request
+ */
+static void s5p_hash_copy_result(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ if (!req->result)
+ return;
+
+ memcpy(req->result, ctx->digest, ctx->nregs * HASH_REG_SIZEOF);
+}
+
+/**
+ * s5p_hash_dma_flush() - flush HASH DMA
+ * @dev: secss device
+ */
+static void s5p_hash_dma_flush(struct s5p_aes_dev *dev)
+{
+ SSS_WRITE(dev, FCHRDMAC, SSS_FCHRDMAC_FLUSH);
+}
+
+/**
+ * s5p_hash_dma_enable() - enable DMA mode for HASH
+ * @dev: secss device
+ *
+ * enable DMA mode for HASH
+ */
+static void s5p_hash_dma_enable(struct s5p_aes_dev *dev)
+{
+ s5p_hash_write(dev, SSS_REG_HASH_CTRL_FIFO, SSS_HASH_FIFO_MODE_DMA);
+}
+
+/**
+ * s5p_hash_irq_disable() - disable irq HASH signals
+ * @dev: secss device
+ * @flags: bitfield with irq's to be disabled
+ */
+static void s5p_hash_irq_disable(struct s5p_aes_dev *dev, u32 flags)
+{
+ SSS_WRITE(dev, FCINTENCLR, flags);
+}
+
+/**
+ * s5p_hash_irq_enable() - enable irq signals
+ * @dev: secss device
+ * @flags: bitfield with irq's to be enabled
+ */
+static void s5p_hash_irq_enable(struct s5p_aes_dev *dev, int flags)
+{
+ SSS_WRITE(dev, FCINTENSET, flags);
+}
+
+/**
+ * s5p_hash_set_flow() - set flow inside SecSS AES/DES with/without HASH
+ * @dev: secss device
+ * @hashflow: HASH stream flow with/without crypto AES/DES
+ */
+static void s5p_hash_set_flow(struct s5p_aes_dev *dev, u32 hashflow)
+{
+ unsigned long flags;
+ u32 flow;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ flow = SSS_READ(dev, FCFIFOCTRL);
+ flow &= ~SSS_HASHIN_MASK;
+ flow |= hashflow;
+ SSS_WRITE(dev, FCFIFOCTRL, flow);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+}
+
+/**
+ * s5p_ahash_dma_init() - enable DMA and set HASH flow inside SecSS
+ * @dev: secss device
+ * @hashflow: HASH stream flow with/without AES/DES
+ *
+ * flush HASH DMA and enable DMA, set HASH stream flow inside SecSS HW,
+ * enable HASH irq's HRDMA, HDONE, HPART
+ */
+static void s5p_ahash_dma_init(struct s5p_aes_dev *dev, u32 hashflow)
+{
+ s5p_hash_irq_disable(dev, SSS_FCINTENCLR_HRDMAINTENCLR |
+ SSS_FCINTENCLR_HDONEINTENCLR |
+ SSS_FCINTENCLR_HPARTINTENCLR);
+ s5p_hash_dma_flush(dev);
+
+ s5p_hash_dma_enable(dev);
+ s5p_hash_set_flow(dev, hashflow & SSS_HASHIN_MASK);
+ s5p_hash_irq_enable(dev, SSS_FCINTENSET_HRDMAINTENSET |
+ SSS_FCINTENSET_HDONEINTENSET |
+ SSS_FCINTENSET_HPARTINTENSET);
+}
+
+/**
+ * s5p_hash_write_ctrl() - prepare HASH block in SecSS for processing
+ * @dd: secss device
+ * @length: length for request
+ * @final: true if final op
+ *
+ * Prepare SSS HASH block for processing bytes in DMA mode. If it is called
+ * after previous updates, fill up IV words. For final, calculate and set
+ * lengths for HASH so SecSS can finalize hash. For partial, set SSS HASH
+ * length as 2^63 so it will be never reached and set to zero prelow and
+ * prehigh.
+ *
+ * This function does not start DMA transfer.
+ */
+static void s5p_hash_write_ctrl(struct s5p_aes_dev *dd, size_t length,
+ bool final)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
+ u32 prelow, prehigh, low, high;
+ u32 configflags, swapflags;
+ u64 tmplen;
+
+ configflags = ctx->engine | SSS_HASH_INIT_BIT;
+
+ if (likely(ctx->digcnt)) {
+ s5p_hash_write_ctx_iv(dd, ctx);
+ configflags |= SSS_HASH_USER_IV_EN;
+ }
+
+ if (final) {
+ /* number of bytes for last part */
+ low = length;
+ high = 0;
+ /* total number of bits prev hashed */
+ tmplen = ctx->digcnt * 8;
+ prelow = (u32)tmplen;
+ prehigh = (u32)(tmplen >> 32);
+ } else {
+ prelow = 0;
+ prehigh = 0;
+ low = 0;
+ high = BIT(31);
+ }
+
+ swapflags = SSS_HASH_BYTESWAP_DI | SSS_HASH_BYTESWAP_DO |
+ SSS_HASH_BYTESWAP_IV | SSS_HASH_BYTESWAP_KEY;
+
+ s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_LOW, low);
+ s5p_hash_write(dd, SSS_REG_HASH_MSG_SIZE_HIGH, high);
+ s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_LOW, prelow);
+ s5p_hash_write(dd, SSS_REG_HASH_PRE_MSG_SIZE_HIGH, prehigh);
+
+ s5p_hash_write(dd, SSS_REG_HASH_CTRL_SWAP, swapflags);
+ s5p_hash_write(dd, SSS_REG_HASH_CTRL, configflags);
+}
+
+/**
+ * s5p_hash_xmit_dma() - start DMA hash processing
+ * @dd: secss device
+ * @length: length for request
+ * @final: true if final op
+ *
+ * Update digcnt here, as it is needed for finup/final op.
+ */
+static int s5p_hash_xmit_dma(struct s5p_aes_dev *dd, size_t length,
+ bool final)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
+ unsigned int cnt;
+
+ cnt = dma_map_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE);
+ if (!cnt) {
+ dev_err(dd->dev, "dma_map_sg error\n");
+ ctx->error = true;
+ return -EINVAL;
+ }
+
+ set_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags);
+ dd->hash_sg_iter = ctx->sg;
+ dd->hash_sg_cnt = cnt;
+ s5p_hash_write_ctrl(dd, length, final);
+ ctx->digcnt += length;
+ ctx->total -= length;
+
+ /* catch last interrupt */
+ if (final)
+ set_bit(HASH_FLAGS_FINAL, &dd->hash_flags);
+
+ s5p_set_dma_hashdata(dd, dd->hash_sg_iter); /* DMA starts */
+
+ return -EINPROGRESS;
+}
+
+/**
+ * s5p_hash_copy_sgs() - copy request's bytes into new buffer
+ * @ctx: request context
+ * @sg: source scatterlist request
+ * @new_len: number of bytes to process from sg
+ *
+ * Allocate new buffer, copy data for HASH into it. If there was xmit_buf
+ * filled, copy it first, then copy data from sg into it. Prepare one sgl[0]
+ * with allocated buffer.
+ *
+ * Set bit in dd->hash_flag so we can free it after irq ends processing.
+ */
+static int s5p_hash_copy_sgs(struct s5p_hash_reqctx *ctx,
+ struct scatterlist *sg, unsigned int new_len)
+{
+ unsigned int pages, len;
+ void *buf;
+
+ len = new_len + ctx->bufcnt;
+ pages = get_order(len);
+
+ buf = (void *)__get_free_pages(GFP_ATOMIC, pages);
+ if (!buf) {
+ dev_err(ctx->dd->dev, "alloc pages for unaligned case.\n");
+ ctx->error = true;
+ return -ENOMEM;
+ }
+
+ if (ctx->bufcnt)
+ memcpy(buf, ctx->dd->xmit_buf, ctx->bufcnt);
+
+ scatterwalk_map_and_copy(buf + ctx->bufcnt, sg, ctx->skip,
+ new_len, 0);
+ sg_init_table(ctx->sgl, 1);
+ sg_set_buf(ctx->sgl, buf, len);
+ ctx->sg = ctx->sgl;
+ ctx->sg_len = 1;
+ ctx->bufcnt = 0;
+ ctx->skip = 0;
+ set_bit(HASH_FLAGS_SGS_COPIED, &ctx->dd->hash_flags);
+
+ return 0;
+}
+
+/**
+ * s5p_hash_copy_sg_lists() - copy sg list and make fixes in copy
+ * @ctx: request context
+ * @sg: source scatterlist request
+ * @new_len: number of bytes to process from sg
+ *
+ * Allocate new scatterlist table, copy data for HASH into it. If there was
+ * xmit_buf filled, prepare it first, then copy page, length and offset from
+ * source sg into it, adjusting begin and/or end for skip offset and
+ * hash_later value.
+ *
+ * Resulting sg table will be assigned to ctx->sg. Set flag so we can free
+ * it after irq ends processing.
+ */
+static int s5p_hash_copy_sg_lists(struct s5p_hash_reqctx *ctx,
+ struct scatterlist *sg, unsigned int new_len)
+{
+ unsigned int skip = ctx->skip, n = sg_nents(sg);
+ struct scatterlist *tmp;
+ unsigned int len;
+
+ if (ctx->bufcnt)
+ n++;
+
+ ctx->sg = kmalloc_array(n, sizeof(*sg), GFP_KERNEL);
+ if (!ctx->sg) {
+ ctx->error = true;
+ return -ENOMEM;
+ }
+
+ sg_init_table(ctx->sg, n);
+
+ tmp = ctx->sg;
+
+ ctx->sg_len = 0;
+
+ if (ctx->bufcnt) {
+ sg_set_buf(tmp, ctx->dd->xmit_buf, ctx->bufcnt);
+ tmp = sg_next(tmp);
+ ctx->sg_len++;
+ }
+
+ while (sg && skip >= sg->length) {
+ skip -= sg->length;
+ sg = sg_next(sg);
+ }
+
+ while (sg && new_len) {
+ len = sg->length - skip;
+ if (new_len < len)
+ len = new_len;
+
+ new_len -= len;
+ sg_set_page(tmp, sg_page(sg), len, sg->offset + skip);
+ skip = 0;
+ if (new_len <= 0)
+ sg_mark_end(tmp);
+
+ tmp = sg_next(tmp);
+ ctx->sg_len++;
+ sg = sg_next(sg);
+ }
+
+ set_bit(HASH_FLAGS_SGS_ALLOCED, &ctx->dd->hash_flags);
+
+ return 0;
+}
+
+/**
+ * s5p_hash_prepare_sgs() - prepare sg for processing
+ * @ctx: request context
+ * @sg: source scatterlist request
+ * @nbytes: number of bytes to process from sg
+ * @final: final flag
+ *
+ * Check two conditions: (1) if buffers in sg have len aligned data, and (2)
+ * sg table have good aligned elements (list_ok). If one of this checks fails,
+ * then either (1) allocates new buffer for data with s5p_hash_copy_sgs, copy
+ * data into this buffer and prepare request in sgl, or (2) allocates new sg
+ * table and prepare sg elements.
+ *
+ * For digest or finup all conditions can be good, and we may not need any
+ * fixes.
+ */
+static int s5p_hash_prepare_sgs(struct s5p_hash_reqctx *ctx,
+ struct scatterlist *sg,
+ unsigned int new_len, bool final)
+{
+ unsigned int skip = ctx->skip, nbytes = new_len, n = 0;
+ bool aligned = true, list_ok = true;
+ struct scatterlist *sg_tmp = sg;
+
+ if (!sg || !sg->length || !new_len)
+ return 0;
+
+ if (skip || !final)
+ list_ok = false;
+
+ while (nbytes > 0 && sg_tmp) {
+ n++;
+ if (skip >= sg_tmp->length) {
+ skip -= sg_tmp->length;
+ if (!sg_tmp->length) {
+ aligned = false;
+ break;
+ }
+ } else {
+ if (!IS_ALIGNED(sg_tmp->length - skip, BUFLEN)) {
+ aligned = false;
+ break;
+ }
+
+ if (nbytes < sg_tmp->length - skip) {
+ list_ok = false;
+ break;
+ }
+
+ nbytes -= sg_tmp->length - skip;
+ skip = 0;
+ }
+
+ sg_tmp = sg_next(sg_tmp);
+ }
+
+ if (!aligned)
+ return s5p_hash_copy_sgs(ctx, sg, new_len);
+ else if (!list_ok)
+ return s5p_hash_copy_sg_lists(ctx, sg, new_len);
+
+ /*
+ * Have aligned data from previous operation and/or current
+ * Note: will enter here only if (digest or finup) and aligned
+ */
+ if (ctx->bufcnt) {
+ ctx->sg_len = n;
+ sg_init_table(ctx->sgl, 2);
+ sg_set_buf(ctx->sgl, ctx->dd->xmit_buf, ctx->bufcnt);
+ sg_chain(ctx->sgl, 2, sg);
+ ctx->sg = ctx->sgl;
+ ctx->sg_len++;
+ } else {
+ ctx->sg = sg;
+ ctx->sg_len = n;
+ }
+
+ return 0;
+}
+
+/**
+ * s5p_hash_prepare_request() - prepare request for processing
+ * @req: AHASH request
+ * @update: true if UPDATE op
+ *
+ * Note 1: we can have update flag _and_ final flag at the same time.
+ * Note 2: we enter here when digcnt > BUFLEN (=HASH_BLOCK_SIZE) or
+ * either req->nbytes or ctx->bufcnt + req->nbytes is > BUFLEN or
+ * we have final op
+ */
+static int s5p_hash_prepare_request(struct ahash_request *req, bool update)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ bool final = ctx->finup;
+ int xmit_len, hash_later, nbytes;
+ int ret;
+
+ if (!req)
+ return 0;
+
+ if (update)
+ nbytes = req->nbytes;
+ else
+ nbytes = 0;
+
+ ctx->total = nbytes + ctx->bufcnt;
+ if (!ctx->total)
+ return 0;
+
+ if (nbytes && (!IS_ALIGNED(ctx->bufcnt, BUFLEN))) {
+ /* bytes left from previous request, so fill up to BUFLEN */
+ int len = BUFLEN - ctx->bufcnt % BUFLEN;
+
+ if (len > nbytes)
+ len = nbytes;
+
+ scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, req->src,
+ 0, len, 0);
+ ctx->bufcnt += len;
+ nbytes -= len;
+ ctx->skip = len;
+ } else {
+ ctx->skip = 0;
+ }
+
+ if (ctx->bufcnt)
+ memcpy(ctx->dd->xmit_buf, ctx->buffer, ctx->bufcnt);
+
+ xmit_len = ctx->total;
+ if (final) {
+ hash_later = 0;
+ } else {
+ if (IS_ALIGNED(xmit_len, BUFLEN))
+ xmit_len -= BUFLEN;
+ else
+ xmit_len -= xmit_len & (BUFLEN - 1);
+
+ hash_later = ctx->total - xmit_len;
+ /* copy hash_later bytes from end of req->src */
+ /* previous bytes are in xmit_buf, so no overwrite */
+ scatterwalk_map_and_copy(ctx->buffer, req->src,
+ req->nbytes - hash_later,
+ hash_later, 0);
+ }
+
+ if (xmit_len > BUFLEN) {
+ ret = s5p_hash_prepare_sgs(ctx, req->src, nbytes - hash_later,
+ final);
+ if (ret)
+ return ret;
+ } else {
+ /* have buffered data only */
+ if (unlikely(!ctx->bufcnt)) {
+ /* first update didn't fill up buffer */
+ scatterwalk_map_and_copy(ctx->dd->xmit_buf, req->src,
+ 0, xmit_len, 0);
+ }
+
+ sg_init_table(ctx->sgl, 1);
+ sg_set_buf(ctx->sgl, ctx->dd->xmit_buf, xmit_len);
+
+ ctx->sg = ctx->sgl;
+ ctx->sg_len = 1;
+ }
+
+ ctx->bufcnt = hash_later;
+ if (!final)
+ ctx->total = xmit_len;
+
+ return 0;
+}
+
+/**
+ * s5p_hash_update_dma_stop() - unmap DMA
+ * @dd: secss device
+ *
+ * Unmap scatterlist ctx->sg.
+ */
+static void s5p_hash_update_dma_stop(struct s5p_aes_dev *dd)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(dd->hash_req);
+
+ dma_unmap_sg(dd->dev, ctx->sg, ctx->sg_len, DMA_TO_DEVICE);
+ clear_bit(HASH_FLAGS_DMA_ACTIVE, &dd->hash_flags);
+}
+
+/**
+ * s5p_hash_finish() - copy calculated digest to crypto layer
+ * @req: AHASH request
+ */
+static void s5p_hash_finish(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct s5p_aes_dev *dd = ctx->dd;
+
+ if (ctx->digcnt)
+ s5p_hash_copy_result(req);
+
+ dev_dbg(dd->dev, "hash_finish digcnt: %lld\n", ctx->digcnt);
+}
+
+/**
+ * s5p_hash_finish_req() - finish request
+ * @req: AHASH request
+ * @err: error
+ */
+static void s5p_hash_finish_req(struct ahash_request *req, int err)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct s5p_aes_dev *dd = ctx->dd;
+ unsigned long flags;
+
+ if (test_bit(HASH_FLAGS_SGS_COPIED, &dd->hash_flags))
+ free_pages((unsigned long)sg_virt(ctx->sg),
+ get_order(ctx->sg->length));
+
+ if (test_bit(HASH_FLAGS_SGS_ALLOCED, &dd->hash_flags))
+ kfree(ctx->sg);
+
+ ctx->sg = NULL;
+ dd->hash_flags &= ~(BIT(HASH_FLAGS_SGS_ALLOCED) |
+ BIT(HASH_FLAGS_SGS_COPIED));
+
+ if (!err && !ctx->error) {
+ s5p_hash_read_msg(req);
+ if (test_bit(HASH_FLAGS_FINAL, &dd->hash_flags))
+ s5p_hash_finish(req);
+ } else {
+ ctx->error = true;
+ }
+
+ spin_lock_irqsave(&dd->hash_lock, flags);
+ dd->hash_flags &= ~(BIT(HASH_FLAGS_BUSY) | BIT(HASH_FLAGS_FINAL) |
+ BIT(HASH_FLAGS_DMA_READY) |
+ BIT(HASH_FLAGS_OUTPUT_READY));
+ spin_unlock_irqrestore(&dd->hash_lock, flags);
+
+ if (req->base.complete)
+ req->base.complete(&req->base, err);
+}
+
+/**
+ * s5p_hash_handle_queue() - handle hash queue
+ * @dd: device s5p_aes_dev
+ * @req: AHASH request
+ *
+ * If req!=NULL enqueue it on dd->queue, if FLAGS_BUSY is not set on the
+ * device then processes the first request from the dd->queue
+ *
+ * Returns: see s5p_hash_final below.
+ */
+static int s5p_hash_handle_queue(struct s5p_aes_dev *dd,
+ struct ahash_request *req)
+{
+ struct crypto_async_request *async_req, *backlog;
+ struct s5p_hash_reqctx *ctx;
+ unsigned long flags;
+ int err = 0, ret = 0;
+
+retry:
+ spin_lock_irqsave(&dd->hash_lock, flags);
+ if (req)
+ ret = ahash_enqueue_request(&dd->hash_queue, req);
+
+ if (test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) {
+ spin_unlock_irqrestore(&dd->hash_lock, flags);
+ return ret;
+ }
+
+ backlog = crypto_get_backlog(&dd->hash_queue);
+ async_req = crypto_dequeue_request(&dd->hash_queue);
+ if (async_req)
+ set_bit(HASH_FLAGS_BUSY, &dd->hash_flags);
+
+ spin_unlock_irqrestore(&dd->hash_lock, flags);
+
+ if (!async_req)
+ return ret;
+
+ if (backlog)
+ backlog->complete(backlog, -EINPROGRESS);
+
+ req = ahash_request_cast(async_req);
+ dd->hash_req = req;
+ ctx = ahash_request_ctx(req);
+
+ err = s5p_hash_prepare_request(req, ctx->op_update);
+ if (err || !ctx->total)
+ goto out;
+
+ dev_dbg(dd->dev, "handling new req, op_update: %u, nbytes: %d\n",
+ ctx->op_update, req->nbytes);
+
+ s5p_ahash_dma_init(dd, SSS_HASHIN_INDEPENDENT);
+ if (ctx->digcnt)
+ s5p_hash_write_iv(req); /* restore hash IV */
+
+ if (ctx->op_update) { /* HASH_OP_UPDATE */
+ err = s5p_hash_xmit_dma(dd, ctx->total, ctx->finup);
+ if (err != -EINPROGRESS && ctx->finup && !ctx->error)
+ /* no final() after finup() */
+ err = s5p_hash_xmit_dma(dd, ctx->total, true);
+ } else { /* HASH_OP_FINAL */
+ err = s5p_hash_xmit_dma(dd, ctx->total, true);
+ }
+out:
+ if (err != -EINPROGRESS) {
+ /* hash_tasklet_cb will not finish it, so do it here */
+ s5p_hash_finish_req(req, err);
+ req = NULL;
+
+ /*
+ * Execute next request immediately if there is anything
+ * in queue.
+ */
+ goto retry;
+ }
+
+ return ret;
+}
+
+/**
+ * s5p_hash_tasklet_cb() - hash tasklet
+ * @data: ptr to s5p_aes_dev
+ */
+static void s5p_hash_tasklet_cb(unsigned long data)
+{
+ struct s5p_aes_dev *dd = (struct s5p_aes_dev *)data;
+
+ if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags)) {
+ s5p_hash_handle_queue(dd, NULL);
+ return;
+ }
+
+ if (test_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags)) {
+ if (test_and_clear_bit(HASH_FLAGS_DMA_ACTIVE,
+ &dd->hash_flags)) {
+ s5p_hash_update_dma_stop(dd);
+ }
+
+ if (test_and_clear_bit(HASH_FLAGS_OUTPUT_READY,
+ &dd->hash_flags)) {
+ /* hash or semi-hash ready */
+ clear_bit(HASH_FLAGS_DMA_READY, &dd->hash_flags);
+ goto finish;
+ }
+ }
+
+ return;
+
+finish:
+ /* finish curent request */
+ s5p_hash_finish_req(dd->hash_req, 0);
+
+ /* If we are not busy, process next req */
+ if (!test_bit(HASH_FLAGS_BUSY, &dd->hash_flags))
+ s5p_hash_handle_queue(dd, NULL);
+}
+
+/**
+ * s5p_hash_enqueue() - enqueue request
+ * @req: AHASH request
+ * @op: operation UPDATE (true) or FINAL (false)
+ *
+ * Returns: see s5p_hash_final below.
+ */
+static int s5p_hash_enqueue(struct ahash_request *req, bool op)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+
+ ctx->op_update = op;
+
+ return s5p_hash_handle_queue(tctx->dd, req);
+}
+
+/**
+ * s5p_hash_update() - process the hash input data
+ * @req: AHASH request
+ *
+ * If request will fit in buffer, copy it and return immediately
+ * else enqueue it with OP_UPDATE.
+ *
+ * Returns: see s5p_hash_final below.
+ */
+static int s5p_hash_update(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ if (!req->nbytes)
+ return 0;
+
+ if (ctx->bufcnt + req->nbytes <= BUFLEN) {
+ scatterwalk_map_and_copy(ctx->buffer + ctx->bufcnt, req->src,
+ 0, req->nbytes, 0);
+ ctx->bufcnt += req->nbytes;
+ return 0;
+ }
+
+ return s5p_hash_enqueue(req, true); /* HASH_OP_UPDATE */
+}
+
+/**
+ * s5p_hash_shash_digest() - calculate shash digest
+ * @tfm: crypto transformation
+ * @flags: tfm flags
+ * @data: input data
+ * @len: length of data
+ * @out: output buffer
+ */
+static int s5p_hash_shash_digest(struct crypto_shash *tfm, u32 flags,
+ const u8 *data, unsigned int len, u8 *out)
+{
+ SHASH_DESC_ON_STACK(shash, tfm);
+
+ shash->tfm = tfm;
+ shash->flags = flags & ~CRYPTO_TFM_REQ_MAY_SLEEP;
+
+ return crypto_shash_digest(shash, data, len, out);
+}
+
+/**
+ * s5p_hash_final_shash() - calculate shash digest
+ * @req: AHASH request
+ */
+static int s5p_hash_final_shash(struct ahash_request *req)
+{
+ struct s5p_hash_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ return s5p_hash_shash_digest(tctx->fallback, req->base.flags,
+ ctx->buffer, ctx->bufcnt, req->result);
+}
+
+/**
+ * s5p_hash_final() - close up hash and calculate digest
+ * @req: AHASH request
+ *
+ * Note: in final req->src do not have any data, and req->nbytes can be
+ * non-zero.
+ *
+ * If there were no input data processed yet and the buffered hash data is
+ * less than BUFLEN (64) then calculate the final hash immediately by using
+ * SW algorithm fallback.
+ *
+ * Otherwise enqueues the current AHASH request with OP_FINAL operation op
+ * and finalize hash message in HW. Note that if digcnt!=0 then there were
+ * previous update op, so there are always some buffered bytes in ctx->buffer,
+ * which means that ctx->bufcnt!=0
+ *
+ * Returns:
+ * 0 if the request has been processed immediately,
+ * -EINPROGRESS if the operation has been queued for later execution or is set
+ * to processing by HW,
+ * -EBUSY if queue is full and request should be resubmitted later, other
+ * negative values on error.
+ */
+static int s5p_hash_final(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ ctx->finup = true;
+ if (ctx->error)
+ return -EINVAL; /* uncompleted hash is not needed */
+
+ if (!ctx->digcnt && ctx->bufcnt < BUFLEN)
+ return s5p_hash_final_shash(req);
+
+ return s5p_hash_enqueue(req, false); /* HASH_OP_FINAL */
+}
+
+/**
+ * s5p_hash_finup() - process last req->src and calculate digest
+ * @req: AHASH request containing the last update data
+ *
+ * Return values: see s5p_hash_final above.
+ */
+static int s5p_hash_finup(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ int err1, err2;
+
+ ctx->finup = true;
+
+ err1 = s5p_hash_update(req);
+ if (err1 == -EINPROGRESS || err1 == -EBUSY)
+ return err1;
+
+ /*
+ * final() has to be always called to cleanup resources even if
+ * update() failed, except EINPROGRESS or calculate digest for small
+ * size
+ */
+ err2 = s5p_hash_final(req);
+
+ return err1 ?: err2;
+}
+
+/**
+ * s5p_hash_init() - initialize AHASH request contex
+ * @req: AHASH request
+ *
+ * Init async hash request context.
+ */
+static int s5p_hash_init(struct ahash_request *req)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
+
+ ctx->dd = tctx->dd;
+ ctx->error = false;
+ ctx->finup = false;
+ ctx->bufcnt = 0;
+ ctx->digcnt = 0;
+ ctx->total = 0;
+ ctx->skip = 0;
+
+ dev_dbg(tctx->dd->dev, "init: digest size: %d\n",
+ crypto_ahash_digestsize(tfm));
+
+ switch (crypto_ahash_digestsize(tfm)) {
+ case MD5_DIGEST_SIZE:
+ ctx->engine = SSS_HASH_ENGINE_MD5;
+ ctx->nregs = HASH_MD5_MAX_REG;
+ break;
+ case SHA1_DIGEST_SIZE:
+ ctx->engine = SSS_HASH_ENGINE_SHA1;
+ ctx->nregs = HASH_SHA1_MAX_REG;
+ break;
+ case SHA256_DIGEST_SIZE:
+ ctx->engine = SSS_HASH_ENGINE_SHA256;
+ ctx->nregs = HASH_SHA256_MAX_REG;
+ break;
+ default:
+ ctx->error = true;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * s5p_hash_digest - calculate digest from req->src
+ * @req: AHASH request
+ *
+ * Return values: see s5p_hash_final above.
+ */
+static int s5p_hash_digest(struct ahash_request *req)
+{
+ return s5p_hash_init(req) ?: s5p_hash_finup(req);
+}
+
+/**
+ * s5p_hash_cra_init_alg - init crypto alg transformation
+ * @tfm: crypto transformation
+ */
+static int s5p_hash_cra_init_alg(struct crypto_tfm *tfm)
+{
+ struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm);
+ const char *alg_name = crypto_tfm_alg_name(tfm);
+
+ tctx->dd = s5p_dev;
+ /* Allocate a fallback and abort if it failed. */
+ tctx->fallback = crypto_alloc_shash(alg_name, 0,
+ CRYPTO_ALG_NEED_FALLBACK);
+ if (IS_ERR(tctx->fallback)) {
+ pr_err("fallback alloc fails for '%s'\n", alg_name);
+ return PTR_ERR(tctx->fallback);
+ }
+
+ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+ sizeof(struct s5p_hash_reqctx) + BUFLEN);
+
+ return 0;
+}
+
+/**
+ * s5p_hash_cra_init - init crypto tfm
+ * @tfm: crypto transformation
+ */
+static int s5p_hash_cra_init(struct crypto_tfm *tfm)
+{
+ return s5p_hash_cra_init_alg(tfm);
+}
+
+/**
+ * s5p_hash_cra_exit - exit crypto tfm
+ * @tfm: crypto transformation
+ *
+ * free allocated fallback
+ */
+static void s5p_hash_cra_exit(struct crypto_tfm *tfm)
+{
+ struct s5p_hash_ctx *tctx = crypto_tfm_ctx(tfm);
+
+ crypto_free_shash(tctx->fallback);
+ tctx->fallback = NULL;
+}
+
+/**
+ * s5p_hash_export - export hash state
+ * @req: AHASH request
+ * @out: buffer for exported state
+ */
+static int s5p_hash_export(struct ahash_request *req, void *out)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+
+ memcpy(out, ctx, sizeof(*ctx) + ctx->bufcnt);
+
+ return 0;
+}
+
+/**
+ * s5p_hash_import - import hash state
+ * @req: AHASH request
+ * @in: buffer with state to be imported from
+ */
+static int s5p_hash_import(struct ahash_request *req, const void *in)
+{
+ struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+ struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
+ const struct s5p_hash_reqctx *ctx_in = in;
+
+ memcpy(ctx, in, sizeof(*ctx) + BUFLEN);
+ if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
+ ctx->error = true;
+ return -EINVAL;
+ }
+
+ ctx->dd = tctx->dd;
+ ctx->error = false;
+
+ return 0;
+}
+
+static struct ahash_alg algs_sha1_md5_sha256[] = {
+{
+ .init = s5p_hash_init,
+ .update = s5p_hash_update,
+ .final = s5p_hash_final,
+ .finup = s5p_hash_finup,
+ .digest = s5p_hash_digest,
+ .export = s5p_hash_export,
+ .import = s5p_hash_import,
+ .halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
+ .halg.digestsize = SHA1_DIGEST_SIZE,
+ .halg.base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "exynos-sha1",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = HASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s5p_hash_ctx),
+ .cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
+ .cra_module = THIS_MODULE,
+ .cra_init = s5p_hash_cra_init,
+ .cra_exit = s5p_hash_cra_exit,
+ }
+},
+{
+ .init = s5p_hash_init,
+ .update = s5p_hash_update,
+ .final = s5p_hash_final,
+ .finup = s5p_hash_finup,
+ .digest = s5p_hash_digest,
+ .export = s5p_hash_export,
+ .import = s5p_hash_import,
+ .halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
+ .halg.digestsize = MD5_DIGEST_SIZE,
+ .halg.base = {
+ .cra_name = "md5",
+ .cra_driver_name = "exynos-md5",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = HASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s5p_hash_ctx),
+ .cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
+ .cra_module = THIS_MODULE,
+ .cra_init = s5p_hash_cra_init,
+ .cra_exit = s5p_hash_cra_exit,
+ }
+},
+{
+ .init = s5p_hash_init,
+ .update = s5p_hash_update,
+ .final = s5p_hash_final,
+ .finup = s5p_hash_finup,
+ .digest = s5p_hash_digest,
+ .export = s5p_hash_export,
+ .import = s5p_hash_import,
+ .halg.statesize = sizeof(struct s5p_hash_reqctx) + BUFLEN,
+ .halg.digestsize = SHA256_DIGEST_SIZE,
+ .halg.base = {
+ .cra_name = "sha256",
+ .cra_driver_name = "exynos-sha256",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC |
+ CRYPTO_ALG_NEED_FALLBACK,
+ .cra_blocksize = HASH_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct s5p_hash_ctx),
+ .cra_alignmask = SSS_HASH_DMA_ALIGN_MASK,
+ .cra_module = THIS_MODULE,
+ .cra_init = s5p_hash_cra_init,
+ .cra_exit = s5p_hash_cra_exit,
+ }
+}
+
+};
+
static void s5p_set_aes(struct s5p_aes_dev *dev,
uint8_t *key, uint8_t *iv, unsigned int keylen)
{
@@ -829,6 +2155,7 @@ static int s5p_aes_probe(struct platform_device *pdev)
struct samsung_aes_variant *variant;
struct s5p_aes_dev *pdata;
struct resource *res;
+ unsigned int hash_i;

if (s5p_dev)
return -EEXIST;
@@ -837,12 +2164,34 @@ static int s5p_aes_probe(struct platform_device *pdev)
if (!pdata)
return -ENOMEM;

+ variant = find_s5p_sss_version(pdev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(pdata->ioaddr))
- return PTR_ERR(pdata->ioaddr);

- variant = find_s5p_sss_version(pdev);
+ /*
+ * Note: HASH and PRNG uses the same registers in secss, avoid
+ * overwrite each other. This will drop HASH when CONFIG_EXYNOS_RNG
+ * is enabled in config. We need larger size for HASH registers in
+ * secss, current describe only AES/DES
+ */
+ if (IS_ENABLED(CONFIG_CRYPTO_DEV_EXYNOS_HASH)) {
+ if (variant == &exynos_aes_data) {
+ res->end += 0x300;
+ pdata->use_hash = true;
+ }
+ }
+
+ pdata->res = res;
+ pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->ioaddr)) {
+ if (!pdata->use_hash)
+ return PTR_ERR(pdata->ioaddr);
+ /* try AES without HASH */
+ res->end -= 0x300;
+ pdata->use_hash = false;
+ pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pdata->ioaddr))
+ return PTR_ERR(pdata->ioaddr);
+ }

pdata->clk = devm_clk_get(dev, "secss");
if (IS_ERR(pdata->clk)) {
@@ -857,8 +2206,10 @@ static int s5p_aes_probe(struct platform_device *pdev)
}

spin_lock_init(&pdata->lock);
+ spin_lock_init(&pdata->hash_lock);

pdata->aes_ioaddr = pdata->ioaddr + variant->aes_offset;
+ pdata->io_hash_base = pdata->ioaddr + variant->hash_offset;

pdata->irq_fc = platform_get_irq(pdev, 0);
if (pdata->irq_fc < 0) {
@@ -888,12 +2239,40 @@ static int s5p_aes_probe(struct platform_device *pdev)
goto err_algs;
}

+ if (pdata->use_hash) {
+ tasklet_init(&pdata->hash_tasklet, s5p_hash_tasklet_cb,
+ (unsigned long)pdata);
+ crypto_init_queue(&pdata->hash_queue, SSS_HASH_QUEUE_LENGTH);
+
+ for (hash_i = 0; hash_i < ARRAY_SIZE(algs_sha1_md5_sha256);
+ hash_i++) {
+ struct ahash_alg *alg;
+
+ alg = &algs_sha1_md5_sha256[hash_i];
+ err = crypto_register_ahash(alg);
+ if (err) {
+ dev_err(dev, "can't register '%s': %d\n",
+ alg->halg.base.cra_driver_name, err);
+ goto err_hash;
+ }
+ }
+ }
+
dev_info(dev, "s5p-sss driver registered\n");

return 0;

+err_hash:
+ for (j = hash_i - 1; j >= 0; j--)
+ crypto_unregister_ahash(&algs_sha1_md5_sha256[j]);
+
+ tasklet_kill(&pdata->hash_tasklet);
+ res->end -= 0x300;
+
err_algs:
- dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name, err);
+ if (i < ARRAY_SIZE(algs))
+ dev_err(dev, "can't register '%s': %d\n", algs[i].cra_name,
+ err);

for (j = 0; j < i; j++)
crypto_unregister_alg(&algs[j]);
@@ -920,9 +2299,16 @@ static int s5p_aes_remove(struct platform_device *pdev)
crypto_unregister_alg(&algs[i]);

tasklet_kill(&pdata->tasklet);
+ if (pdata->use_hash) {
+ for (i = ARRAY_SIZE(algs_sha1_md5_sha256) - 1; i >= 0; i--)
+ crypto_unregister_ahash(&algs_sha1_md5_sha256[i]);

- clk_disable_unprepare(pdata->clk);
+ pdata->res->end -= 0x300;
+ tasklet_kill(&pdata->hash_tasklet);
+ pdata->use_hash = false;
+ }

+ clk_disable_unprepare(pdata->clk);
s5p_dev = NULL;

return 0;
@@ -942,3 +2328,4 @@ module_platform_driver(s5p_aes_crypto);
MODULE_DESCRIPTION("S5PV210 AES hw acceleration support.");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Vladimir Zapolskiy <[email protected]>");
+MODULE_AUTHOR("Kamil Konieczny <[email protected]>");
--
2.14.1.536.g6867272d5b56

2017-10-19 09:47:46

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v7 1/2] crypto: s5p-sss: change spaces into tabs in defines

On Tue, Oct 17, 2017 at 1:28 PM, Kamil Konieczny
<[email protected]> wrote:
> change spaces into tabs in defines
>
> Signed-off-by: Kamil Konieczny <[email protected]>
> ---
> drivers/crypto/s5p-sss.c | 190 +++++++++++++++++++++++------------------------
> 1 file changed, 95 insertions(+), 95 deletions(-)
>

I reviewed this already...

Best regards,
Krzysztof

2017-10-19 09:48:55

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v7 2/2] crypto: s5p-sss: Add HASH support for Exynos

On Tue, Oct 17, 2017 at 1:28 PM, Kamil Konieczny
<[email protected]> wrote:
> Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
> It uses the crypto framework asynchronous hash api.
> It is based on omap-sham.c driver.
> S5P has some HW differencies and is not implemented.
>
> Modifications in s5p-sss:
>
> - Add hash supporting structures and functions.
>
> - Modify irq handler to handle both aes and hash signals.
>
> - Resize resource end in probe if EXYNOS_HASH is enabled in
> Kconfig.
>
> - Add new copyright line and new author.
>
> - Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
> with crypto run-time self test testmgr
> and with tcrypt module with: modprobe tcrypt sec=1 mode=N
> where N=402, 403, 404 (MD5, SHA1, SHA256).
>
> Modifications in drivers/crypto/Kconfig:
>
> - Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
> and CRYPTO_DEV_S5P
>
> - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
> as they are nedded for fallback.
>
> Signed-off-by: Kamil Konieczny <[email protected]>
> ---
> drivers/crypto/Kconfig | 14 +
> drivers/crypto/s5p-sss.c | 1407 +++++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 1411 insertions(+), 10 deletions(-)


Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof

2017-10-22 10:18:33

by Vladimir Zapolskiy

[permalink] [raw]
Subject: Re: [PATCH v7 1/2] crypto: s5p-sss: change spaces into tabs in defines

Hi Kamil,

On 10/17/2017 02:28 PM, Kamil Konieczny wrote:
> change spaces into tabs in defines

Here a grammatically correct sentence in English is welcome.

>
> Signed-off-by: Kamil Konieczny <[email protected]>
> ---

Please feel free to add a tag

Acked-by: Vladimir Zapolskiy <[email protected]>

--
With best wishes,
Vladimir

2017-10-22 10:26:48

by Vladimir Zapolskiy

[permalink] [raw]
Subject: Re: [PATCH v7 2/2] crypto: s5p-sss: Add HASH support for Exynos

Hi Kamil,

thank you for updates, I have just a few more comments.

On 10/17/2017 02:28 PM, Kamil Konieczny wrote:
> Add support for MD5, SHA1, SHA256 hash algorithms for Exynos HW.
> It uses the crypto framework asynchronous hash api.
> It is based on omap-sham.c driver.
> S5P has some HW differencies and is not implemented.
>
> Modifications in s5p-sss:
>
> - Add hash supporting structures and functions.
>
> - Modify irq handler to handle both aes and hash signals.
>
> - Resize resource end in probe if EXYNOS_HASH is enabled in
> Kconfig.
>
> - Add new copyright line and new author.
>
> - Tested on Odroid-U3 with Exynos 4412 CPU, kernel 4.13-rc6
> with crypto run-time self test testmgr
> and with tcrypt module with: modprobe tcrypt sec=1 mode=N
> where N=402, 403, 404 (MD5, SHA1, SHA256).
>
> Modifications in drivers/crypto/Kconfig:
>
> - Add new CRYPTO_DEV_EXYNOS_HASH, depend on !EXYNOS_RNG
> and CRYPTO_DEV_S5P
>
> - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
> as they are nedded for fallback.

Typo, s/nedded/needed/

[snip]

>
> #include <linux/clk.h>
> #include <linux/crypto.h>
> +#include <linux/delay.h>

I can not find which interfaces from linux/delay.h are needed.
I suppose it should not be added.

[snip]

> -static struct s5p_aes_dev *s5p_dev;
> +/**
> + * struct s5p_hash_reqctx - HASH request context
> + * @dev: Associated device

dev or dd?

> + * @op_update: Current request operation (OP_UPDATE or OP_FINAL)
> + * @digcnt: Number of bytes processed by HW (without buffer[] ones)
> + * @digest: Digest message or IV for partial result
> + * @nregs: Number of HW registers for digest or IV read/write
> + * @engine: Bits for selecting type of HASH in SSS block
> + * @sg: sg for DMA transfer
> + * @sg_len: Length of sg for DMA transfer
> + * @sgl[]: sg for joining buffer and req->src scatterlist
> + * @skip: Skip offset in req->src for current op
> + * @total: Total number of bytes for current request
> + * @finup: Keep state for finup or final.
> + * @error: Keep track of error.
> + * @bufcnt: Number of bytes holded in buffer[]
> + * @buffer[]: For byte(s) from end of req->src in UPDATE op
> + */
> +struct s5p_hash_reqctx {
> + struct s5p_aes_dev *dd;
> + bool op_update;
> +
> + u64 digcnt;
> + u8 digest[SHA256_DIGEST_SIZE];
> +
> + unsigned int nregs; /* digest_size / sizeof(reg) */
> + u32 engine;
> +
> + struct scatterlist *sg;
> + unsigned int sg_len;
> + struct scatterlist sgl[2];
> + unsigned int skip;
> + unsigned int total;
> + bool finup;
> + bool error;
> +
> + u32 bufcnt;
> + u8 buffer[0];
> +};

[snip]

> +
> +/**
> + * s5p_hash_shash_digest() - calculate shash digest
> + * @tfm: crypto transformation
> + * @flags: tfm flags
> + * @data: input data
> + * @len: length of data
> + * @out: output buffer
> + */
> +static int s5p_hash_shash_digest(struct crypto_shash *tfm, u32 flags,
> + const u8 *data, unsigned int len, u8 *out)
> +{
> + SHASH_DESC_ON_STACK(shash, tfm);

Just for information, this line produces a spatch warning:

drivers/crypto/s5p-sss.c:1534:9: warning: Variable length array is used.

I think it can be ignored.

> +
> + shash->tfm = tfm;
> + shash->flags = flags & ~CRYPTO_TFM_REQ_MAY_SLEEP;
> +
> + return crypto_shash_digest(shash, data, len, out);
> +}
> +

[snip]

> +/**
> + * s5p_hash_final() - close up hash and calculate digest
> + * @req: AHASH request
> + *
> + * Note: in final req->src do not have any data, and req->nbytes can be
> + * non-zero.
> + *
> + * If there were no input data processed yet and the buffered hash data is
> + * less than BUFLEN (64) then calculate the final hash immediately by using
> + * SW algorithm fallback.
> + *
> + * Otherwise enqueues the current AHASH request with OP_FINAL operation op
> + * and finalize hash message in HW. Note that if digcnt!=0 then there were
> + * previous update op, so there are always some buffered bytes in ctx->buffer,
> + * which means that ctx->bufcnt!=0
> + *
> + * Returns:
> + * 0 if the request has been processed immediately,
> + * -EINPROGRESS if the operation has been queued for later execution or is set
> + * to processing by HW,
> + * -EBUSY if queue is full and request should be resubmitted later, other
> + * negative values on error.

Do you want to add -EINVAL into the list also?

> + */
> +static int s5p_hash_final(struct ahash_request *req)
> +{
> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
> +
> + ctx->finup = true;
> + if (ctx->error)
> + return -EINVAL; /* uncompleted hash is not needed */
> +
> + if (!ctx->digcnt && ctx->bufcnt < BUFLEN)
> + return s5p_hash_final_shash(req);
> +
> + return s5p_hash_enqueue(req, false); /* HASH_OP_FINAL */
> +}
> +

[snip]

> +/**
> + * s5p_hash_finup() - process last req->src and calculate digest
> + * @req: AHASH request containing the last update data
> + *
> + * Return values: see s5p_hash_final above.
> + */
> +static int s5p_hash_finup(struct ahash_request *req)
> +{
> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
> + int err1, err2;
> +
> + ctx->finup = true;
> +
> + err1 = s5p_hash_update(req);
> + if (err1 == -EINPROGRESS || err1 == -EBUSY)
> + return err1;
> +
> + /*
> + * final() has to be always called to cleanup resources even if
> + * update() failed, except EINPROGRESS or calculate digest for small
> + * size
> + */
> + err2 = s5p_hash_final(req);
> +
> + return err1 ?: err2;

See a note below.

[snip]

> +/**
> + * s5p_hash_digest - calculate digest from req->src
> + * @req: AHASH request
> + *
> + * Return values: see s5p_hash_final above.
> + */
> +static int s5p_hash_digest(struct ahash_request *req)
> +{
> + return s5p_hash_init(req) ?: s5p_hash_finup(req);

Now I got it, this ?: notation is invalid according to C99 and thus it
confused me, but GCC has an extension to support it, so, it's up to you
if you leave it as is or change it to comply with C99. If it ever causes
any troubles, it'll be easy to fix, and I'm fine if you leave it as is,
because it is understandable to GCC.

[snip]

> +/**
> + * s5p_hash_import - import hash state
> + * @req: AHASH request
> + * @in: buffer with state to be imported from
> + */
> +static int s5p_hash_import(struct ahash_request *req, const void *in)
> +{
> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
> + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
> + struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
> + const struct s5p_hash_reqctx *ctx_in = in;
> +
> + memcpy(ctx, in, sizeof(*ctx) + BUFLEN);
> + if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {

Now "ctx_in->bufcnt < 0" condition can be removed, moreover it
will eliminate a warning reproted by the compiler:

drivers/crypto/s5p-sss.c:1748:21: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
^

2017-10-24 10:19:32

by Kamil Konieczny

[permalink] [raw]
Subject: Re: [PATCH v7 1/2] crypto: s5p-sss: change spaces into tabs in defines

Hi Vladimir,

Thank you for review.

On 22.10.2017 12:18, Vladimir Zapolskiy wrote:
> Hi Kamil,
>
> On 10/17/2017 02:28 PM, Kamil Konieczny wrote:
>> change spaces into tabs in defines
>
> Here a grammatically correct sentence in English is welcome.

What about: "Change spaces to tabs" ?

>> Signed-off-by: Kamil Konieczny <[email protected]>
>> ---
>
> Please feel free to add a tag
>
> Acked-by: Vladimir Zapolskiy <[email protected]>

--
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland

2017-10-24 11:27:43

by Kamil Konieczny

[permalink] [raw]
Subject: Re: [PATCH v7 2/2] crypto: s5p-sss: Add HASH support for Exynos

Hi Vladimir,

Thank you for review, I will apply almost all of your remarks,
see answers below.

On 22.10.2017 12:18, Vladimir Zapolskiy wrote:
> Hi Kamil,
>
> thank you for updates, I have just a few more comments.
>
> On 10/17/2017 02:28 PM, Kamil Konieczny wrote:
>> [...]
>> - Select sw algorithms MD5, SHA1 and SHA256 in EXYNOS_HASH
>> as they are nedded for fallback.
>
> Typo, s/nedded/needed/

ok, Thank you for spotting this.

> [snip]
>
>>
>> #include <linux/clk.h>
>> #include <linux/crypto.h>
>> +#include <linux/delay.h>
>
> I can not find which interfaces from linux/delay.h are needed.
> I suppose it should not be added.
>
> [snip]

Yes, you are right, I will delete this 'include delay.h'

>> -static struct s5p_aes_dev *s5p_dev;
>> +/**
>> + * struct s5p_hash_reqctx - HASH request context
>> + * @dev: Associated device
>
> dev or dd?

dd

>> + * @op_update: Current request operation (OP_UPDATE or OP_FINAL)
>> + * @digcnt: Number of bytes processed by HW (without buffer[] ones)
>> + * @digest: Digest message or IV for partial result
>> + * @nregs: Number of HW registers for digest or IV read/write
>> + * @engine: Bits for selecting type of HASH in SSS block
>> + * @sg: sg for DMA transfer
>> + * @sg_len: Length of sg for DMA transfer
>> + * @sgl[]: sg for joining buffer and req->src scatterlist
>> + * @skip: Skip offset in req->src for current op
>> + * @total: Total number of bytes for current request
>> + * @finup: Keep state for finup or final.
>> + * @error: Keep track of error.
>> + * @bufcnt: Number of bytes holded in buffer[]
>> + * @buffer[]: For byte(s) from end of req->src in UPDATE op
>> + */
>> +struct s5p_hash_reqctx {
>> + struct s5p_aes_dev *dd;
>> + bool op_update;
>> +
>
> [snip]
>
>> +
>> +/**
>> + * s5p_hash_shash_digest() - calculate shash digest
>> + * @tfm: crypto transformation
>> + * @flags: tfm flags
>> + * @data: input data
>> + * @len: length of data
>> + * @out: output buffer
>> + */
>> +static int s5p_hash_shash_digest(struct crypto_shash *tfm, u32 flags,
>> + const u8 *data, unsigned int len, u8 *out)
>> +{
>> + SHASH_DESC_ON_STACK(shash, tfm);
>
> Just for information, this line produces a spatch warning:
>
> drivers/crypto/s5p-sss.c:1534:9: warning: Variable length array is used.
>
> I think it can be ignored.

I also think it can be ignored, it uses 104 bytes on stack in case of SHA256 ,
sizeof struct sha256_state for SW generic implementation, found in
include/crypto/sha.h

>> +
>> + shash->tfm = tfm;
>> + shash->flags = flags & ~CRYPTO_TFM_REQ_MAY_SLEEP;
>> +
>> + return crypto_shash_digest(shash, data, len, out);
>> +}
>> +
>
> [snip]
>
>> +/**
>> + * s5p_hash_final() - close up hash and calculate digest
>> + * @req: AHASH request
>> + *
>> + * Note: in final req->src do not have any data, and req->nbytes can be
>> + * non-zero.
>> + *
>> + * If there were no input data processed yet and the buffered hash data is
>> + * less than BUFLEN (64) then calculate the final hash immediately by using
>> + * SW algorithm fallback.
>> + *
>> + * Otherwise enqueues the current AHASH request with OP_FINAL operation op
>> + * and finalize hash message in HW. Note that if digcnt!=0 then there were
>> + * previous update op, so there are always some buffered bytes in ctx->buffer,
>> + * which means that ctx->bufcnt!=0
>> + *
>> + * Returns:
>> + * 0 if the request has been processed immediately,
>> + * -EINPROGRESS if the operation has been queued for later execution or is set
>> + * to processing by HW,
>> + * -EBUSY if queue is full and request should be resubmitted later, other
>> + * negative values on error.
>
> Do you want to add -EINVAL into the list also?

Here I made bad formatting, it should read:

* -EBUSY if queue is full and request should be resubmitted later,
* other negative values on error.

I do not want to specify explicitly all error negative codes here, as it also uses
s5p_hash_enqueue and these return codes are referenced from other places. I intended
to listing success values, 0, -EINPROGRESS, then explaining -EBUSY, then adding all
other negative as error. The other values can be -EINVAL, -ENOMEM or maybe other, when
this module gets extended to HMAC implementation.

>> + */
>> +static int s5p_hash_final(struct ahash_request *req)
>> +{
>> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
>> +
>> + ctx->finup = true;
>> + if (ctx->error)
>> + return -EINVAL; /* uncompleted hash is not needed */
>> +
>> + if (!ctx->digcnt && ctx->bufcnt < BUFLEN)
>> + return s5p_hash_final_shash(req);
>> +
>> + return s5p_hash_enqueue(req, false); /* HASH_OP_FINAL */
>> +}
>> +
>
> [snip]
>
>> +/**
>> + * s5p_hash_finup() - process last req->src and calculate digest
>> + * @req: AHASH request containing the last update data
>> + *
>> + * Return values: see s5p_hash_final above.
>> + */
>> +static int s5p_hash_finup(struct ahash_request *req)
>> +{
>> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
>> + int err1, err2;
>> +
>> + ctx->finup = true;
>> +
>> + err1 = s5p_hash_update(req);
>> + if (err1 == -EINPROGRESS || err1 == -EBUSY)
>> + return err1;
>> +
>> + /*
>> + * final() has to be always called to cleanup resources even if
>> + * update() failed, except EINPROGRESS or calculate digest for small
>> + * size
>> + */
>> + err2 = s5p_hash_final(req);
>> +
>> + return err1 ?: err2;
>
> See a note below.
>
> [snip]
>
>> +/**
>> + * s5p_hash_digest - calculate digest from req->src
>> + * @req: AHASH request
>> + *
>> + * Return values: see s5p_hash_final above.
>> + */
>> +static int s5p_hash_digest(struct ahash_request *req)
>> +{
>> + return s5p_hash_init(req) ?: s5p_hash_finup(req);
>
> Now I got it, this ?: notation is invalid according to C99 and thus it
> confused me, but GCC has an extension to support it, so, it's up to you
> if you leave it as is or change it to comply with C99. If it ever causes
> any troubles, it'll be easy to fix, and I'm fine if you leave it as is,
> because it is understandable to GCC.
>
> [snip]

I agree and I prefer to keep it in current shape, this patch is already big.

>> +/**
>> + * s5p_hash_import - import hash state
>> + * @req: AHASH request
>> + * @in: buffer with state to be imported from
>> + */
>> +static int s5p_hash_import(struct ahash_request *req, const void *in)
>> +{
>> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
>> + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
>> + struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
>> + const struct s5p_hash_reqctx *ctx_in = in;
>> +
>> + memcpy(ctx, in, sizeof(*ctx) + BUFLEN);
>> + if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
>
> Now "ctx_in->bufcnt < 0" condition can be removed, moreover it
> will eliminate a warning reproted by the compiler:
>
> drivers/crypto/s5p-sss.c:1748:21: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
> if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
> ^

You are right, I will drop first condition. BTW what compiler options are you using ?
This one was not reported by my compilation process.

--
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland

2017-10-25 04:21:59

by Vladimir Zapolskiy

[permalink] [raw]
Subject: Re: [PATCH v7 1/2] crypto: s5p-sss: change spaces into tabs in defines

Hi Kamil,

On 10/24/2017 01:19 PM, Kamil Konieczny wrote:
> Hi Vladimir,
>
> Thank you for review.
>
> On 22.10.2017 12:18, Vladimir Zapolskiy wrote:
>> Hi Kamil,
>>
>> On 10/17/2017 02:28 PM, Kamil Konieczny wrote:
>>> change spaces into tabs in defines
>>
>> Here a grammatically correct sentence in English is welcome.
>
> What about: "Change spaces to tabs" ?
>

yes, it'll be fine, sorry if I was excessively pedantic.

2017-10-25 04:32:46

by Vladimir Zapolskiy

[permalink] [raw]
Subject: Re: [PATCH v7 2/2] crypto: s5p-sss: Add HASH support for Exynos

Hi Kamil,

I'll just answer to your question, all the comments from you are accepted,
please send a new version with the minor fixes, hopefully the change will
be included into v4.15-rc.

On 10/24/2017 02:27 PM, Kamil Konieczny wrote:
> Hi Vladimir,
>
> Thank you for review, I will apply almost all of your remarks,
> see answers below.
>
> On 22.10.2017 12:18, Vladimir Zapolskiy wrote:
>> Hi Kamil,
>>
>> thank you for updates, I have just a few more comments.
>>

[snip]

>>> +/**
>>> + * s5p_hash_import - import hash state
>>> + * @req: AHASH request
>>> + * @in: buffer with state to be imported from
>>> + */
>>> +static int s5p_hash_import(struct ahash_request *req, const void *in)
>>> +{
>>> + struct s5p_hash_reqctx *ctx = ahash_request_ctx(req);
>>> + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
>>> + struct s5p_hash_ctx *tctx = crypto_ahash_ctx(tfm);
>>> + const struct s5p_hash_reqctx *ctx_in = in;
>>> +
>>> + memcpy(ctx, in, sizeof(*ctx) + BUFLEN);
>>> + if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
>>
>> Now "ctx_in->bufcnt < 0" condition can be removed, moreover it
>> will eliminate a warning reproted by the compiler:
>>
>> drivers/crypto/s5p-sss.c:1748:21: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits]
>> if (ctx_in->bufcnt < 0 || ctx_in->bufcnt > BUFLEN) {
>> ^
>
> You are right, I will drop first condition. BTW what compiler options are you using ?
> This one was not reported by my compilation process.
>

Regularly I specify 'make C=1 W=1' options to build a kernel with changes,
some of the new reported warnings are false positives, but in general it
makes sense to check the output to catch potential issues like this one.

--
With best wishes,
Vladimir