This patchset adds the implementation of SHA-3 algorithm
in software and it's based on original implementation
pushed in patch https://lwn.net/Articles/518415/ with
additional changes to match the padding rules specified
in SHA-3 specification.
This patchset also includes changes in tcrypt module to
add support for SHA-3 algorithms test and related test
vectors for basic testing.
Broadcom Secure Processing Unit-2(SPU-2) engine supports
offloading of SHA-3 operations in hardware, in order to
add SHA-3 support in SPU-2 driver we needed to have the
software implementation and test framework in place.
The patchset is based on v4.7-rc1 tag and its tested on
Broadcom NorthStar2 SoC.
Jeff Garzik (1):
Crypto: Add SHA-3 hash algorithm
Raveendra Padasalagi (1):
Crypto: Add SHA-3 Test's in tcrypt
crypto/Kconfig | 10 ++
crypto/Makefile | 1 +
crypto/sha3_generic.c | 296 ++++++++++++++++++++++++++++++++++++++++++++++++++
crypto/tcrypt.c | 53 ++++++++-
crypto/testmgr.c | 40 +++++++
crypto/testmgr.h | 125 +++++++++++++++++++++
include/crypto/sha3.h | 29 +++++
7 files changed, 553 insertions(+), 1 deletion(-)
create mode 100644 crypto/sha3_generic.c
create mode 100644 include/crypto/sha3.h
--
1.9.1
Added support for SHA-3 algorithm test's
in tcrypt module and related test vectors.
Signed-off-by: Raveendra Padasalagi <[email protected]>
---
crypto/tcrypt.c | 53 ++++++++++++++++++++++-
crypto/testmgr.c | 40 ++++++++++++++++++
crypto/testmgr.h | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 217 insertions(+), 1 deletion(-)
diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c
index 579dce0..4675459 100644
--- a/crypto/tcrypt.c
+++ b/crypto/tcrypt.c
@@ -72,7 +72,8 @@ static char *check[] = {
"cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea", "xtea",
"khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt",
"camellia", "seed", "salsa20", "rmd128", "rmd160", "rmd256", "rmd320",
- "lzo", "cts", "zlib", NULL
+ "lzo", "cts", "zlib", "sha3-224", "sha3-256", "sha3-384", "sha3-512",
+ NULL
};
struct tcrypt_result {
@@ -1284,6 +1285,22 @@ static int do_test(const char *alg, u32 type, u32 mask, int m)
ret += tcrypt_test("crct10dif");
break;
+ case 48:
+ ret += tcrypt_test("sha3-224");
+ break;
+
+ case 49:
+ ret += tcrypt_test("sha3-256");
+ break;
+
+ case 50:
+ ret += tcrypt_test("sha3-384");
+ break;
+
+ case 51:
+ ret += tcrypt_test("sha3-512");
+ break;
+
case 100:
ret += tcrypt_test("hmac(md5)");
break;
@@ -1691,6 +1708,22 @@ static int do_test(const char *alg, u32 type, u32 mask, int m)
test_hash_speed("poly1305", sec, poly1305_speed_template);
if (mode > 300 && mode < 400) break;
+ case 322:
+ test_hash_speed("sha3-224", sec, generic_hash_speed_template);
+ if (mode > 300 && mode < 400) break;
+
+ case 323:
+ test_hash_speed("sha3-256", sec, generic_hash_speed_template);
+ if (mode > 300 && mode < 400) break;
+
+ case 324:
+ test_hash_speed("sha3-384", sec, generic_hash_speed_template);
+ if (mode > 300 && mode < 400) break;
+
+ case 325:
+ test_hash_speed("sha3-512", sec, generic_hash_speed_template);
+ if (mode > 300 && mode < 400) break;
+
case 399:
break;
@@ -1770,6 +1803,24 @@ static int do_test(const char *alg, u32 type, u32 mask, int m)
test_ahash_speed("rmd320", sec, generic_hash_speed_template);
if (mode > 400 && mode < 500) break;
+ case 418:
+ test_ahash_speed("sha3-224", sec, generic_hash_speed_template);
+ if (mode > 400 && mode < 500) break;
+
+ case 419:
+ test_ahash_speed("sha3-256", sec, generic_hash_speed_template);
+ if (mode > 400 && mode < 500) break;
+
+ case 420:
+ test_ahash_speed("sha3-384", sec, generic_hash_speed_template);
+ if (mode > 400 && mode < 500) break;
+
+
+ case 421:
+ test_ahash_speed("sha3-512", sec, generic_hash_speed_template);
+ if (mode > 400 && mode < 500) break;
+
+
case 499:
break;
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index c727fb0..b773a56 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -3659,6 +3659,46 @@ static const struct alg_test_desc alg_test_descs[] = {
}
}
}, {
+ .alg = "sha3-224",
+ .test = alg_test_hash,
+ .fips_allowed = 1,
+ .suite = {
+ .hash = {
+ .vecs = sha3_224_tv_template,
+ .count = SHA3_224_TEST_VECTORS
+ }
+ }
+ }, {
+ .alg = "sha3-256",
+ .test = alg_test_hash,
+ .fips_allowed = 1,
+ .suite = {
+ .hash = {
+ .vecs = sha3_256_tv_template,
+ .count = SHA3_256_TEST_VECTORS
+ }
+ }
+ }, {
+ .alg = "sha3-384",
+ .test = alg_test_hash,
+ .fips_allowed = 1,
+ .suite = {
+ .hash = {
+ .vecs = sha3_384_tv_template,
+ .count = SHA3_384_TEST_VECTORS
+ }
+ }
+ }, {
+ .alg = "sha3-512",
+ .test = alg_test_hash,
+ .fips_allowed = 1,
+ .suite = {
+ .hash = {
+ .vecs = sha3_512_tv_template,
+ .count = SHA3_512_TEST_VECTORS
+ }
+ }
+ }, {
.alg = "sha384",
.test = alg_test_hash,
.fips_allowed = 1,
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index 487ec88..b70e3c9 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -376,6 +376,131 @@ static struct hash_testvec md4_tv_template [] = {
},
};
+#define SHA3_224_TEST_VECTORS 3
+static struct hash_testvec sha3_224_tv_template[] = {
+ {
+ .plaintext = "",
+ .digest = "\x6b\x4e\x03\x42\x36\x67\xdb\xb7"
+ "\x3b\x6e\x15\x45\x4f\x0e\xb1\xab"
+ "\xd4\x59\x7f\x9a\x1b\x07\x8e\x3f"
+ "\x5b\x5a\x6b\xc7",
+ }, {
+ .plaintext = "a",
+ .psize = 1,
+ .digest = "\x9e\x86\xff\x69\x55\x7c\xa9\x5f"
+ "\x40\x5f\x08\x12\x69\x68\x5b\x38"
+ "\xe3\xa8\x19\xb3\x09\xee\x94\x2f"
+ "\x48\x2b\x6a\x8b",
+ }, {
+ .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
+ "jklmklmnlmnomnopnopq",
+ .psize = 56,
+ .digest = "\x8a\x24\x10\x8b\x15\x4a\xda\x21"
+ "\xc9\xfd\x55\x74\x49\x44\x79\xba"
+ "\x5c\x7e\x7a\xb7\x6e\xf2\x64\xea"
+ "\xd0\xfc\xce\x33",
+ },
+};
+
+#define SHA3_256_TEST_VECTORS 3
+static struct hash_testvec sha3_256_tv_template[] = {
+ {
+ .plaintext = "",
+ .digest = "\xa7\xff\xc6\xf8\xbf\x1e\xd7\x66"
+ "\x51\xc1\x47\x56\xa0\x61\xd6\x62"
+ "\xf5\x80\xff\x4d\xe4\x3b\x49\xfa"
+ "\x82\xd8\x0a\x4b\x80\xf8\x43\x4a",
+ }, {
+ .plaintext = "a",
+ .psize = 1,
+ .digest = "\x80\x08\x4b\xf2\xfb\xa0\x24\x75"
+ "\x72\x6f\xeb\x2c\xab\x2d\x82\x15"
+ "\xea\xb1\x4b\xc6\xbd\xd8\xbf\xb2"
+ "\xc8\x15\x12\x57\x03\x2e\xcd\x8b",
+ }, {
+ .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
+ "jklmklmnlmnomnopnopq",
+ .psize = 56,
+ .digest = "\x41\xc0\xdb\xa2\xa9\xd6\x24\x08"
+ "\x49\x10\x03\x76\xa8\x23\x5e\x2c"
+ "\x82\xe1\xb9\x99\x8a\x99\x9e\x21"
+ "\xdb\x32\xdd\x97\x49\x6d\x33\x76",
+ },
+};
+
+
+#define SHA3_384_TEST_VECTORS 3
+static struct hash_testvec sha3_384_tv_template[] = {
+ {
+ .plaintext = "",
+ .digest = "\x0c\x63\xa7\x5b\x84\x5e\x4f\x7d"
+ "\x01\x10\x7d\x85\x2e\x4c\x24\x85"
+ "\xc5\x1a\x50\xaa\xaa\x94\xfc\x61"
+ "\x99\x5e\x71\xbb\xee\x98\x3a\x2a"
+ "\xc3\x71\x38\x31\x26\x4a\xdb\x47"
+ "\xfb\x6b\xd1\xe0\x58\xd5\xf0\x04",
+ }, {
+ .plaintext = "a",
+ .psize = 1,
+ .digest = "\x18\x15\xf7\x74\xf3\x20\x49\x1b"
+ "\x48\x56\x9e\xfe\xc7\x94\xd2\x49"
+ "\xee\xb5\x9a\xae\x46\xd2\x2b\xf7"
+ "\x7d\xaf\xe2\x5c\x5e\xdc\x28\xd7"
+ "\xea\x44\xf9\x3e\xe1\x23\x4a\xa8"
+ "\x8f\x61\xc9\x19\x12\xa4\xcc\xd9",
+ }, {
+ .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
+ "jklmklmnlmnomnopnopq",
+ .psize = 56,
+ .digest = "\x99\x1c\x66\x57\x55\xeb\x3a\x4b"
+ "\x6b\xbd\xfb\x75\xc7\x8a\x49\x2e"
+ "\x8c\x56\xa2\x2c\x5c\x4d\x7e\x42"
+ "\x9b\xfd\xbc\x32\xb9\xd4\xad\x5a"
+ "\xa0\x4a\x1f\x07\x6e\x62\xfe\xa1"
+ "\x9e\xef\x51\xac\xd0\x65\x7c\x22",
+ },
+};
+
+
+#define SHA3_512_TEST_VECTORS 3
+static struct hash_testvec sha3_512_tv_template[] = {
+ {
+ .plaintext = "",
+ .digest = "\xa6\x9f\x73\xcc\xa2\x3a\x9a\xc5"
+ "\xc8\xb5\x67\xdc\x18\x5a\x75\x6e"
+ "\x97\xc9\x82\x16\x4f\xe2\x58\x59"
+ "\xe0\xd1\xdc\xc1\x47\x5c\x80\xa6"
+ "\x15\xb2\x12\x3a\xf1\xf5\xf9\x4c"
+ "\x11\xe3\xe9\x40\x2c\x3a\xc5\x58"
+ "\xf5\x00\x19\x9d\x95\xb6\xd3\xe3"
+ "\x01\x75\x85\x86\x28\x1d\xcd\x26",
+ }, {
+ .plaintext = "a",
+ .psize = 1,
+ .digest = "\x69\x7f\x2d\x85\x61\x72\xcb\x83"
+ "\x09\xd6\xb8\xb9\x7d\xac\x4d\xe3"
+ "\x44\xb5\x49\xd4\xde\xe6\x1e\xdf"
+ "\xb4\x96\x2d\x86\x98\xb7\xfa\x80"
+ "\x3f\x4f\x93\xff\x24\x39\x35\x86"
+ "\xe2\x8b\x5b\x95\x7a\xc3\xd1\xd3"
+ "\x69\x42\x0c\xe5\x33\x32\x71\x2f"
+ "\x99\x7b\xd3\x36\xd0\x9a\xb0\x2a",
+ }, {
+ .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
+ "jklmklmnlmnomnopnopq",
+ .psize = 56,
+ .digest = "\x04\xa3\x71\xe8\x4e\xcf\xb5\xb8"
+ "\xb7\x7c\xb4\x86\x10\xfc\xa8\x18"
+ "\x2d\xd4\x57\xce\x6f\x32\x6a\x0f"
+ "\xd3\xd7\xec\x2f\x1e\x91\x63\x6d"
+ "\xee\x69\x1f\xbe\x0c\x98\x53\x02"
+ "\xba\x1b\x0d\x8d\xc7\x8c\x08\x63"
+ "\x46\xb5\x33\xb4\x9c\x03\x0d\x99"
+ "\xa2\x7d\xaf\x11\x39\xd6\xe7\x5e",
+ },
+};
+
+
/*
* MD5 test vectors from RFC1321
*/
--
1.9.1
From: Jeff Garzik <[email protected]>
This patch adds the implementation of SHA3 algorithm
in software and it's based on original implementation
pushed in patch https://lwn.net/Articles/518415/ with
additional changes to match the padding rules specified
in SHA-3 specification.
Signed-off-by: Jeff Garzik <[email protected]>
Signed-off-by: Raveendra Padasalagi <[email protected]>
---
crypto/Kconfig | 10 ++
crypto/Makefile | 1 +
crypto/sha3_generic.c | 296 ++++++++++++++++++++++++++++++++++++++++++++++++++
include/crypto/sha3.h | 29 +++++
4 files changed, 336 insertions(+)
create mode 100644 crypto/sha3_generic.c
create mode 100644 include/crypto/sha3.h
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 1d33beb..83ee8cb 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -750,6 +750,16 @@ config CRYPTO_SHA512_SPARC64
SHA-512 secure hash standard (DFIPS 180-2) implemented
using sparc64 crypto instructions, when available.
+config CRYPTO_SHA3
+ tristate "SHA3 digest algorithm"
+ select CRYPTO_HASH
+ help
+ SHA-3 secure hash standard (DFIPS 202). It's based on
+ cryptographic sponge function family called Keccak.
+
+ References:
+ http://keccak.noekeon.org/
+
config CRYPTO_TGR192
tristate "Tiger digest algorithms"
select CRYPTO_HASH
diff --git a/crypto/Makefile b/crypto/Makefile
index 4f4ef7e..0b82c47 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_CRYPTO_RMD320) += rmd320.o
obj-$(CONFIG_CRYPTO_SHA1) += sha1_generic.o
obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
+obj-$(CONFIG_CRYPTO_SHA3) += sha3_generic.o
obj-$(CONFIG_CRYPTO_WP512) += wp512.o
obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c
new file mode 100644
index 0000000..162dfc3
--- /dev/null
+++ b/crypto/sha3_generic.c
@@ -0,0 +1,296 @@
+/*
+ * Cryptographic API.
+ *
+ * SHA-3, as specified in
+ * http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
+ *
+ * SHA-3 code by Jeff Garzik <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)•
+ * any later version.
+ *
+ */
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/sha3.h>
+#include <asm/byteorder.h>
+
+#define KECCAK_ROUNDS 24
+
+#define ROTL64(x, y) (((x) << (y)) | ((x) >> (64 - (y))))
+
+static const u64 keccakf_rndc[24] = {
+ 0x0000000000000001, 0x0000000000008082, 0x800000000000808a,
+ 0x8000000080008000, 0x000000000000808b, 0x0000000080000001,
+ 0x8000000080008081, 0x8000000000008009, 0x000000000000008a,
+ 0x0000000000000088, 0x0000000080008009, 0x000000008000000a,
+ 0x000000008000808b, 0x800000000000008b, 0x8000000000008089,
+ 0x8000000000008003, 0x8000000000008002, 0x8000000000000080,
+ 0x000000000000800a, 0x800000008000000a, 0x8000000080008081,
+ 0x8000000000008080, 0x0000000080000001, 0x8000000080008008
+};
+
+static const int keccakf_rotc[24] = {
+ 1, 3, 6, 10, 15, 21, 28, 36, 45, 55, 2, 14,
+ 27, 41, 56, 8, 25, 43, 62, 18, 39, 61, 20, 44
+};
+
+static const int keccakf_piln[24] = {
+ 10, 7, 11, 17, 18, 3, 5, 16, 8, 21, 24, 4,
+ 15, 23, 19, 13, 12, 2, 20, 14, 22, 9, 6, 1
+};
+
+/* update the state with given number of rounds */
+
+static void keccakf(u64 st[25])
+{
+ int i, j, round;
+ u64 t, bc[5];
+
+ for (round = 0; round < KECCAK_ROUNDS; round++) {
+
+ /* Theta */
+ for (i = 0; i < 5; i++)
+ bc[i] = st[i] ^ st[i + 5] ^ st[i + 10] ^ st[i + 15]
+ ^ st[i + 20];
+
+ for (i = 0; i < 5; i++) {
+ t = bc[(i + 4) % 5] ^ ROTL64(bc[(i + 1) % 5], 1);
+ for (j = 0; j < 25; j += 5)
+ st[j + i] ^= t;
+ }
+
+ /* Rho Pi */
+ t = st[1];
+ for (i = 0; i < 24; i++) {
+ j = keccakf_piln[i];
+ bc[0] = st[j];
+ st[j] = ROTL64(t, keccakf_rotc[i]);
+ t = bc[0];
+ }
+
+ /* Chi */
+ for (j = 0; j < 25; j += 5) {
+ for (i = 0; i < 5; i++)
+ bc[i] = st[j + i];
+ for (i = 0; i < 5; i++)
+ st[j + i] ^= (~bc[(i + 1) % 5]) &
+ bc[(i + 2) % 5];
+ }
+
+ /* Iota */
+ st[0] ^= keccakf_rndc[round];
+ }
+}
+
+static void sha3_init(struct sha3_state *sctx, unsigned int digest_sz)
+{
+ memset(sctx, 0, sizeof(*sctx));
+ sctx->md_len = digest_sz;
+ sctx->rsiz = 200 - 2 * digest_sz;
+ sctx->rsizw = sctx->rsiz / 8;
+}
+
+static int sha3_224_init(struct shash_desc *desc)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+
+ sha3_init(sctx, SHA3_224_DIGEST_SIZE);
+ return 0;
+}
+
+static int sha3_256_init(struct shash_desc *desc)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+
+ sha3_init(sctx, SHA3_256_DIGEST_SIZE);
+ return 0;
+}
+
+static int sha3_384_init(struct shash_desc *desc)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+
+ sha3_init(sctx, SHA3_384_DIGEST_SIZE);
+ return 0;
+}
+
+static int sha3_512_init(struct shash_desc *desc)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+
+ sha3_init(sctx, SHA3_512_DIGEST_SIZE);
+ return 0;
+}
+
+static int sha3_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+ unsigned int done;
+ const u8 *src;
+
+ done = 0;
+ src = data;
+
+ if ((sctx->partial + len) > (sctx->rsiz - 1)) {
+ if (sctx->partial) {
+ done = -sctx->partial;
+ memcpy(sctx->buf + sctx->partial, data,
+ done + sctx->rsiz);
+ src = sctx->buf;
+ }
+
+ do {
+ unsigned int i;
+
+ for (i = 0; i < sctx->rsizw; i++)
+ sctx->st[i] ^= ((u64 *) src)[i];
+ keccakf(sctx->st);
+
+ done += sctx->rsiz;
+ src = data + done;
+ } while (done + (sctx->rsiz - 1) < len);
+
+ sctx->partial = 0;
+ }
+ memcpy(sctx->buf + sctx->partial, src, len - done);
+ sctx->partial += (len - done);
+
+ return 0;
+}
+
+static int sha3_final(struct shash_desc *desc, u8 *out)
+{
+ struct sha3_state *sctx = shash_desc_ctx(desc);
+ unsigned int i, inlen = sctx->partial;
+
+ sctx->buf[inlen++] = 0x06;
+ memset(sctx->buf + inlen, 0, sctx->rsiz - inlen);
+ sctx->buf[sctx->rsiz - 1] |= 0x80;
+
+ for (i = 0; i < sctx->rsizw; i++)
+ sctx->st[i] ^= ((u64 *) sctx->buf)[i];
+
+ keccakf(sctx->st);
+
+ for (i = 0; i < sctx->rsizw; i++)
+ sctx->st[i] = cpu_to_le64(sctx->st[i]);
+
+ memcpy(out, sctx->st, sctx->md_len);
+
+ memset(sctx, 0, sizeof(*sctx));
+ return 0;
+}
+
+static struct shash_alg sha3_224 = {
+ .digestsize = SHA3_224_DIGEST_SIZE,
+ .init = sha3_224_init,
+ .update = sha3_update,
+ .final = sha3_final,
+ .descsize = sizeof(struct sha3_state),
+ .base = {
+ .cra_name = "sha3-224",
+ .cra_driver_name = "sha3-224-generic",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA3_224_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static struct shash_alg sha3_256 = {
+ .digestsize = SHA3_256_DIGEST_SIZE,
+ .init = sha3_256_init,
+ .update = sha3_update,
+ .final = sha3_final,
+ .descsize = sizeof(struct sha3_state),
+ .base = {
+ .cra_name = "sha3-256",
+ .cra_driver_name = "sha3-256-generic",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA3_256_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static struct shash_alg sha3_384 = {
+ .digestsize = SHA3_384_DIGEST_SIZE,
+ .init = sha3_384_init,
+ .update = sha3_update,
+ .final = sha3_final,
+ .descsize = sizeof(struct sha3_state),
+ .base = {
+ .cra_name = "sha3-384",
+ .cra_driver_name = "sha3-384-generic",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA3_384_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static struct shash_alg sha3_512 = {
+ .digestsize = SHA3_512_DIGEST_SIZE,
+ .init = sha3_512_init,
+ .update = sha3_update,
+ .final = sha3_final,
+ .descsize = sizeof(struct sha3_state),
+ .base = {
+ .cra_name = "sha3-512",
+ .cra_driver_name = "sha3-512-generic",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA3_512_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+static int __init sha3_generic_mod_init(void)
+{
+ int ret;
+
+ ret = crypto_register_shash(&sha3_224);
+ if (ret < 0)
+ goto err_out;
+ ret = crypto_register_shash(&sha3_256);
+ if (ret < 0)
+ goto err_out_224;
+ ret = crypto_register_shash(&sha3_384);
+ if (ret < 0)
+ goto err_out_256;
+ ret = crypto_register_shash(&sha3_512);
+ if (ret < 0)
+ goto err_out_384;
+
+ return 0;
+
+err_out_384:
+ crypto_unregister_shash(&sha3_384);
+err_out_256:
+ crypto_unregister_shash(&sha3_256);
+err_out_224:
+ crypto_unregister_shash(&sha3_224);
+err_out:
+ return ret;
+}
+
+static void __exit sha3_generic_mod_fini(void)
+{
+ crypto_unregister_shash(&sha3_224);
+ crypto_unregister_shash(&sha3_256);
+ crypto_unregister_shash(&sha3_384);
+ crypto_unregister_shash(&sha3_512);
+}
+
+module_init(sha3_generic_mod_init);
+module_exit(sha3_generic_mod_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA-3 Secure Hash Algorithm");
+
+MODULE_ALIAS("sha3-224");
+MODULE_ALIAS("sha3-256");
+MODULE_ALIAS("sha3-384");
+MODULE_ALIAS("sha3-512");
diff --git a/include/crypto/sha3.h b/include/crypto/sha3.h
new file mode 100644
index 0000000..f4c9f68
--- /dev/null
+++ b/include/crypto/sha3.h
@@ -0,0 +1,29 @@
+/*
+ * Common values for SHA-3 algorithms
+ */
+#ifndef __CRYPTO_SHA3_H__
+#define __CRYPTO_SHA3_H__
+
+#define SHA3_224_DIGEST_SIZE (224 / 8)
+#define SHA3_224_BLOCK_SIZE (200 - 2 * SHA3_224_DIGEST_SIZE)
+
+#define SHA3_256_DIGEST_SIZE (256 / 8)
+#define SHA3_256_BLOCK_SIZE (200 - 2 * SHA3_256_DIGEST_SIZE)
+
+#define SHA3_384_DIGEST_SIZE (384 / 8)
+#define SHA3_384_BLOCK_SIZE (200 - 2 * SHA3_384_DIGEST_SIZE)
+
+#define SHA3_512_DIGEST_SIZE (512 / 8)
+#define SHA3_512_BLOCK_SIZE (200 - 2 * SHA3_512_DIGEST_SIZE)
+
+struct sha3_state {
+ u64 st[25];
+ unsigned int md_len;
+ unsigned int rsiz;
+ unsigned int rsizw;
+
+ unsigned int partial;
+ u8 buf[SHA3_224_BLOCK_SIZE];
+};
+
+#endif
--
1.9.1
Forgot to add Jeff Garzik in the email list.
++ Jeff Garzik.
Regards,
Raveendra
> -----Original Message-----
> From: Raveendra Padasalagi [mailto:[email protected]]
> Sent: 15 June 2016 15:12
> To: Herbert Xu; David S. Miller; [email protected]; linux-
> [email protected]
> Cc: Jon Mason; Florian Fainelli; Anup Patel; Ray Jui; Scott Branden;
Pramod
> Kumar; [email protected]; Raveendra Padasalagi
> Subject: [PATCH 0/2] Add SHA-3 algorithm and test vectors.
>
> This patchset adds the implementation of SHA-3 algorithm in software and
it's
> based on original implementation pushed in patch
> https://lwn.net/Articles/518415/ with additional changes to match the
padding
> rules specified in SHA-3 specification.
>
> This patchset also includes changes in tcrypt module to add support for
SHA-3
> algorithms test and related test vectors for basic testing.
>
> Broadcom Secure Processing Unit-2(SPU-2) engine supports offloading of
SHA-3
> operations in hardware, in order to add SHA-3 support in SPU-2 driver we
> needed to have the software implementation and test framework in place.
>
> The patchset is based on v4.7-rc1 tag and its tested on Broadcom
NorthStar2
> SoC.
>
> Jeff Garzik (1):
> Crypto: Add SHA-3 hash algorithm
>
> Raveendra Padasalagi (1):
> Crypto: Add SHA-3 Test's in tcrypt
>
> crypto/Kconfig | 10 ++
> crypto/Makefile | 1 +
> crypto/sha3_generic.c | 296
> ++++++++++++++++++++++++++++++++++++++++++++++++++
> crypto/tcrypt.c | 53 ++++++++-
> crypto/testmgr.c | 40 +++++++
> crypto/testmgr.h | 125 +++++++++++++++++++++
> include/crypto/sha3.h | 29 +++++
> 7 files changed, 553 insertions(+), 1 deletion(-) create mode 100644
> crypto/sha3_generic.c create mode 100644 include/crypto/sha3.h
>
> --
> 1.9.1
Forgot to add Jeff Garzik in the email list.
++ Jeff Garzik.
Regards,
Raveendra
> -----Original Message-----
> From: Raveendra Padasalagi [mailto:[email protected]]
> Sent: 15 June 2016 15:12
> To: Herbert Xu; David S. Miller; [email protected]; linux-
> [email protected]
> Cc: Jon Mason; Florian Fainelli; Anup Patel; Ray Jui; Scott Branden;
Pramod
> Kumar; [email protected]; Raveendra Padasalagi
> Subject: [PATCH 2/2] Crypto: Add SHA-3 Test's in tcrypt
>
> Added support for SHA-3 algorithm test's in tcrypt module and related
test
> vectors.
>
> Signed-off-by: Raveendra Padasalagi <[email protected]>
> ---
> crypto/tcrypt.c | 53 ++++++++++++++++++++++- crypto/testmgr.c | 40
> ++++++++++++++++++ crypto/testmgr.h | 125
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 217 insertions(+), 1 deletion(-)
>
> diff --git a/crypto/tcrypt.c b/crypto/tcrypt.c index 579dce0..4675459
100644
> --- a/crypto/tcrypt.c
> +++ b/crypto/tcrypt.c
> @@ -72,7 +72,8 @@ static char *check[] = {
> "cast6", "arc4", "michael_mic", "deflate", "crc32c", "tea",
"xtea",
> "khazad", "wp512", "wp384", "wp256", "tnepres", "xeta", "fcrypt",
> "camellia", "seed", "salsa20", "rmd128", "rmd160", "rmd256",
> "rmd320",
> - "lzo", "cts", "zlib", NULL
> + "lzo", "cts", "zlib", "sha3-224", "sha3-256", "sha3-384",
"sha3-512",
> + NULL
> };
>
> struct tcrypt_result {
> @@ -1284,6 +1285,22 @@ static int do_test(const char *alg, u32 type, u32
> mask, int m)
> ret += tcrypt_test("crct10dif");
> break;
>
> + case 48:
> + ret += tcrypt_test("sha3-224");
> + break;
> +
> + case 49:
> + ret += tcrypt_test("sha3-256");
> + break;
> +
> + case 50:
> + ret += tcrypt_test("sha3-384");
> + break;
> +
> + case 51:
> + ret += tcrypt_test("sha3-512");
> + break;
> +
> case 100:
> ret += tcrypt_test("hmac(md5)");
> break;
> @@ -1691,6 +1708,22 @@ static int do_test(const char *alg, u32 type, u32
> mask, int m)
> test_hash_speed("poly1305", sec, poly1305_speed_template);
> if (mode > 300 && mode < 400) break;
>
> + case 322:
> + test_hash_speed("sha3-224", sec,
> generic_hash_speed_template);
> + if (mode > 300 && mode < 400) break;
> +
> + case 323:
> + test_hash_speed("sha3-256", sec,
> generic_hash_speed_template);
> + if (mode > 300 && mode < 400) break;
> +
> + case 324:
> + test_hash_speed("sha3-384", sec,
> generic_hash_speed_template);
> + if (mode > 300 && mode < 400) break;
> +
> + case 325:
> + test_hash_speed("sha3-512", sec,
> generic_hash_speed_template);
> + if (mode > 300 && mode < 400) break;
> +
> case 399:
> break;
>
> @@ -1770,6 +1803,24 @@ static int do_test(const char *alg, u32 type, u32
> mask, int m)
> test_ahash_speed("rmd320", sec,
> generic_hash_speed_template);
> if (mode > 400 && mode < 500) break;
>
> + case 418:
> + test_ahash_speed("sha3-224", sec,
> generic_hash_speed_template);
> + if (mode > 400 && mode < 500) break;
> +
> + case 419:
> + test_ahash_speed("sha3-256", sec,
> generic_hash_speed_template);
> + if (mode > 400 && mode < 500) break;
> +
> + case 420:
> + test_ahash_speed("sha3-384", sec,
> generic_hash_speed_template);
> + if (mode > 400 && mode < 500) break;
> +
> +
> + case 421:
> + test_ahash_speed("sha3-512", sec,
> generic_hash_speed_template);
> + if (mode > 400 && mode < 500) break;
> +
> +
> case 499:
> break;
>
> diff --git a/crypto/testmgr.c b/crypto/testmgr.c index c727fb0..b773a56
100644
> --- a/crypto/testmgr.c
> +++ b/crypto/testmgr.c
> @@ -3659,6 +3659,46 @@ static const struct alg_test_desc
alg_test_descs[] = {
> }
> }
> }, {
> + .alg = "sha3-224",
> + .test = alg_test_hash,
> + .fips_allowed = 1,
> + .suite = {
> + .hash = {
> + .vecs = sha3_224_tv_template,
> + .count = SHA3_224_TEST_VECTORS
> + }
> + }
> + }, {
> + .alg = "sha3-256",
> + .test = alg_test_hash,
> + .fips_allowed = 1,
> + .suite = {
> + .hash = {
> + .vecs = sha3_256_tv_template,
> + .count = SHA3_256_TEST_VECTORS
> + }
> + }
> + }, {
> + .alg = "sha3-384",
> + .test = alg_test_hash,
> + .fips_allowed = 1,
> + .suite = {
> + .hash = {
> + .vecs = sha3_384_tv_template,
> + .count = SHA3_384_TEST_VECTORS
> + }
> + }
> + }, {
> + .alg = "sha3-512",
> + .test = alg_test_hash,
> + .fips_allowed = 1,
> + .suite = {
> + .hash = {
> + .vecs = sha3_512_tv_template,
> + .count = SHA3_512_TEST_VECTORS
> + }
> + }
> + }, {
> .alg = "sha384",
> .test = alg_test_hash,
> .fips_allowed = 1,
> diff --git a/crypto/testmgr.h b/crypto/testmgr.h index 487ec88..b70e3c9
> 100644
> --- a/crypto/testmgr.h
> +++ b/crypto/testmgr.h
> @@ -376,6 +376,131 @@ static struct hash_testvec md4_tv_template [] = {
> },
> };
>
> +#define SHA3_224_TEST_VECTORS 3
> +static struct hash_testvec sha3_224_tv_template[] = {
> + {
> + .plaintext = "",
> + .digest = "\x6b\x4e\x03\x42\x36\x67\xdb\xb7"
> + "\x3b\x6e\x15\x45\x4f\x0e\xb1\xab"
> + "\xd4\x59\x7f\x9a\x1b\x07\x8e\x3f"
> + "\x5b\x5a\x6b\xc7",
> + }, {
> + .plaintext = "a",
> + .psize = 1,
> + .digest = "\x9e\x86\xff\x69\x55\x7c\xa9\x5f"
> + "\x40\x5f\x08\x12\x69\x68\x5b\x38"
> + "\xe3\xa8\x19\xb3\x09\xee\x94\x2f"
> + "\x48\x2b\x6a\x8b",
> + }, {
> + .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
> + "jklmklmnlmnomnopnopq",
> + .psize = 56,
> + .digest = "\x8a\x24\x10\x8b\x15\x4a\xda\x21"
> + "\xc9\xfd\x55\x74\x49\x44\x79\xba"
> + "\x5c\x7e\x7a\xb7\x6e\xf2\x64\xea"
> + "\xd0\xfc\xce\x33",
> + },
> +};
> +
> +#define SHA3_256_TEST_VECTORS 3
> +static struct hash_testvec sha3_256_tv_template[] = {
> + {
> + .plaintext = "",
> + .digest = "\xa7\xff\xc6\xf8\xbf\x1e\xd7\x66"
> + "\x51\xc1\x47\x56\xa0\x61\xd6\x62"
> + "\xf5\x80\xff\x4d\xe4\x3b\x49\xfa"
> + "\x82\xd8\x0a\x4b\x80\xf8\x43\x4a",
> + }, {
> + .plaintext = "a",
> + .psize = 1,
> + .digest = "\x80\x08\x4b\xf2\xfb\xa0\x24\x75"
> + "\x72\x6f\xeb\x2c\xab\x2d\x82\x15"
> + "\xea\xb1\x4b\xc6\xbd\xd8\xbf\xb2"
> + "\xc8\x15\x12\x57\x03\x2e\xcd\x8b",
> + }, {
> + .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
> + "jklmklmnlmnomnopnopq",
> + .psize = 56,
> + .digest = "\x41\xc0\xdb\xa2\xa9\xd6\x24\x08"
> + "\x49\x10\x03\x76\xa8\x23\x5e\x2c"
> + "\x82\xe1\xb9\x99\x8a\x99\x9e\x21"
> + "\xdb\x32\xdd\x97\x49\x6d\x33\x76",
> + },
> +};
> +
> +
> +#define SHA3_384_TEST_VECTORS 3
> +static struct hash_testvec sha3_384_tv_template[] = {
> + {
> + .plaintext = "",
> + .digest = "\x0c\x63\xa7\x5b\x84\x5e\x4f\x7d"
> + "\x01\x10\x7d\x85\x2e\x4c\x24\x85"
> + "\xc5\x1a\x50\xaa\xaa\x94\xfc\x61"
> + "\x99\x5e\x71\xbb\xee\x98\x3a\x2a"
> + "\xc3\x71\x38\x31\x26\x4a\xdb\x47"
> + "\xfb\x6b\xd1\xe0\x58\xd5\xf0\x04",
> + }, {
> + .plaintext = "a",
> + .psize = 1,
> + .digest = "\x18\x15\xf7\x74\xf3\x20\x49\x1b"
> + "\x48\x56\x9e\xfe\xc7\x94\xd2\x49"
> + "\xee\xb5\x9a\xae\x46\xd2\x2b\xf7"
> + "\x7d\xaf\xe2\x5c\x5e\xdc\x28\xd7"
> + "\xea\x44\xf9\x3e\xe1\x23\x4a\xa8"
> + "\x8f\x61\xc9\x19\x12\xa4\xcc\xd9",
> + }, {
> + .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
> + "jklmklmnlmnomnopnopq",
> + .psize = 56,
> + .digest = "\x99\x1c\x66\x57\x55\xeb\x3a\x4b"
> + "\x6b\xbd\xfb\x75\xc7\x8a\x49\x2e"
> + "\x8c\x56\xa2\x2c\x5c\x4d\x7e\x42"
> + "\x9b\xfd\xbc\x32\xb9\xd4\xad\x5a"
> + "\xa0\x4a\x1f\x07\x6e\x62\xfe\xa1"
> + "\x9e\xef\x51\xac\xd0\x65\x7c\x22",
> + },
> +};
> +
> +
> +#define SHA3_512_TEST_VECTORS 3
> +static struct hash_testvec sha3_512_tv_template[] = {
> + {
> + .plaintext = "",
> + .digest = "\xa6\x9f\x73\xcc\xa2\x3a\x9a\xc5"
> + "\xc8\xb5\x67\xdc\x18\x5a\x75\x6e"
> + "\x97\xc9\x82\x16\x4f\xe2\x58\x59"
> + "\xe0\xd1\xdc\xc1\x47\x5c\x80\xa6"
> + "\x15\xb2\x12\x3a\xf1\xf5\xf9\x4c"
> + "\x11\xe3\xe9\x40\x2c\x3a\xc5\x58"
> + "\xf5\x00\x19\x9d\x95\xb6\xd3\xe3"
> + "\x01\x75\x85\x86\x28\x1d\xcd\x26",
> + }, {
> + .plaintext = "a",
> + .psize = 1,
> + .digest = "\x69\x7f\x2d\x85\x61\x72\xcb\x83"
> + "\x09\xd6\xb8\xb9\x7d\xac\x4d\xe3"
> + "\x44\xb5\x49\xd4\xde\xe6\x1e\xdf"
> + "\xb4\x96\x2d\x86\x98\xb7\xfa\x80"
> + "\x3f\x4f\x93\xff\x24\x39\x35\x86"
> + "\xe2\x8b\x5b\x95\x7a\xc3\xd1\xd3"
> + "\x69\x42\x0c\xe5\x33\x32\x71\x2f"
> + "\x99\x7b\xd3\x36\xd0\x9a\xb0\x2a",
> + }, {
> + .plaintext = "abcdbcdecdefdefgefghfghighijhijkijkl"
> + "jklmklmnlmnomnopnopq",
> + .psize = 56,
> + .digest = "\x04\xa3\x71\xe8\x4e\xcf\xb5\xb8"
> + "\xb7\x7c\xb4\x86\x10\xfc\xa8\x18"
> + "\x2d\xd4\x57\xce\x6f\x32\x6a\x0f"
> + "\xd3\xd7\xec\x2f\x1e\x91\x63\x6d"
> + "\xee\x69\x1f\xbe\x0c\x98\x53\x02"
> + "\xba\x1b\x0d\x8d\xc7\x8c\x08\x63"
> + "\x46\xb5\x33\xb4\x9c\x03\x0d\x99"
> + "\xa2\x7d\xaf\x11\x39\xd6\xe7\x5e",
> + },
> +};
> +
> +
> /*
> * MD5 test vectors from RFC1321
> */
> --
> 1.9.1
The patch set can be fetched from iproc-sha3-v1 branch of
https://github.com/Broadcom/arm64-linux.git
Regards,
Raveendra
> -----Original Message-----
> From: Raveendra Padasalagi [mailto:[email protected]]
> Sent: 15 June 2016 15:20
> To: 'Herbert Xu'; 'David S. Miller'; '[email protected]';
'linux-
> [email protected]'; 'Jeff Garzik'; 'Jeff Garzik'
> Cc: 'Jon Mason'; 'Florian Fainelli'; Anup Patel; 'Ray Jui'; 'Scott
Branden'; Pramod
> Kumar; '[email protected]'
> Subject: RE: [PATCH 0/2] Add SHA-3 algorithm and test vectors.
>
> Forgot to add Jeff Garzik in the email list.
>
> ++ Jeff Garzik.
>
>
> Regards,
> Raveendra
>
> > -----Original Message-----
> > From: Raveendra Padasalagi [mailto:[email protected]]
> > Sent: 15 June 2016 15:12
> > To: Herbert Xu; David S. Miller; [email protected]; linux-
> > [email protected]
> > Cc: Jon Mason; Florian Fainelli; Anup Patel; Ray Jui; Scott Branden;
> > Pramod Kumar; [email protected]; Raveendra
> > Padasalagi
> > Subject: [PATCH 0/2] Add SHA-3 algorithm and test vectors.
> >
> > This patchset adds the implementation of SHA-3 algorithm in software
> > and it's based on original implementation pushed in patch
> > https://lwn.net/Articles/518415/ with additional changes to match the
> > padding rules specified in SHA-3 specification.
> >
> > This patchset also includes changes in tcrypt module to add support
> > for SHA-3 algorithms test and related test vectors for basic testing.
> >
> > Broadcom Secure Processing Unit-2(SPU-2) engine supports offloading of
> > SHA-3 operations in hardware, in order to add SHA-3 support in SPU-2
> > driver we needed to have the software implementation and test
framework in
> place.
> >
> > The patchset is based on v4.7-rc1 tag and its tested on Broadcom
> > NorthStar2 SoC.
> >
> > Jeff Garzik (1):
> > Crypto: Add SHA-3 hash algorithm
> >
> > Raveendra Padasalagi (1):
> > Crypto: Add SHA-3 Test's in tcrypt
> >
> > crypto/Kconfig | 10 ++
> > crypto/Makefile | 1 +
> > crypto/sha3_generic.c | 296
> > ++++++++++++++++++++++++++++++++++++++++++++++++++
> > crypto/tcrypt.c | 53 ++++++++-
> > crypto/testmgr.c | 40 +++++++
> > crypto/testmgr.h | 125 +++++++++++++++++++++
> > include/crypto/sha3.h | 29 +++++
> > 7 files changed, 553 insertions(+), 1 deletion(-) create mode 100644
> > crypto/sha3_generic.c create mode 100644 include/crypto/sha3.h
> >
> > --
> > 1.9.1
Am Mittwoch, 15. Juni 2016, 15:11:58 schrieb Raveendra Padasalagi:
Hi Raveendra,
> From: Jeff Garzik <[email protected]>
>
> This patch adds the implementation of SHA3 algorithm
> in software and it's based on original implementation
> pushed in patch https://lwn.net/Articles/518415/ with
> additional changes to match the padding rules specified
> in SHA-3 specification.
>
> Signed-off-by: Jeff Garzik <[email protected]>
> Signed-off-by: Raveendra Padasalagi <[email protected]>
> ---
> crypto/Kconfig | 10 ++
> crypto/Makefile | 1 +
> crypto/sha3_generic.c | 296
> ++++++++++++++++++++++++++++++++++++++++++++++++++ include/crypto/sha3.h |
> 29 +++++
> 4 files changed, 336 insertions(+)
> create mode 100644 crypto/sha3_generic.c
> create mode 100644 include/crypto/sha3.h
>
> diff --git a/crypto/Kconfig b/crypto/Kconfig
> index 1d33beb..83ee8cb 100644
> --- a/crypto/Kconfig
> +++ b/crypto/Kconfig
> @@ -750,6 +750,16 @@ config CRYPTO_SHA512_SPARC64
> SHA-512 secure hash standard (DFIPS 180-2) implemented
> using sparc64 crypto instructions, when available.
>
> +config CRYPTO_SHA3
> + tristate "SHA3 digest algorithm"
> + select CRYPTO_HASH
> + help
> + SHA-3 secure hash standard (DFIPS 202). It's based on
Typo DFIPS?
> + cryptographic sponge function family called Keccak.
> +
> + References:
> + http://keccak.noekeon.org/
> +
> config CRYPTO_TGR192
> tristate "Tiger digest algorithms"
> select CRYPTO_HASH
> diff --git a/crypto/Makefile b/crypto/Makefile
> index 4f4ef7e..0b82c47 100644
> --- a/crypto/Makefile
> +++ b/crypto/Makefile
> @@ -61,6 +61,7 @@ obj-$(CONFIG_CRYPTO_RMD320) += rmd320.o
> obj-$(CONFIG_CRYPTO_SHA1) += sha1_generic.o
> obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
> obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
> +obj-$(CONFIG_CRYPTO_SHA3) += sha3_generic.o
> obj-$(CONFIG_CRYPTO_WP512) += wp512.o
> obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
> obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
> diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c
> new file mode 100644
> index 0000000..162dfc3
> --- /dev/null
> +++ b/crypto/sha3_generic.c
> @@ -0,0 +1,296 @@
> +/*
> + * Cryptographic API.
> + *
> + * SHA-3, as specified in
> + * http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
> + *
> + * SHA-3 code by Jeff Garzik <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> Free + * Software Foundation; either version 2 of the License, or (at your
> option)• + * any later version.
> + *
> + */
> +#include <crypto/internal/hash.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <crypto/sha3.h>
> +#include <asm/byteorder.h>
> +
> +#define KECCAK_ROUNDS 24
> +
> +#define ROTL64(x, y) (((x) << (y)) | ((x) >> (64 - (y))))
> +
> +static const u64 keccakf_rndc[24] = {
> + 0x0000000000000001, 0x0000000000008082, 0x800000000000808a,
> + 0x8000000080008000, 0x000000000000808b, 0x0000000080000001,
> + 0x8000000080008081, 0x8000000000008009, 0x000000000000008a,
> + 0x0000000000000088, 0x0000000080008009, 0x000000008000000a,
> + 0x000000008000808b, 0x800000000000008b, 0x8000000000008089,
> + 0x8000000000008003, 0x8000000000008002, 0x8000000000000080,
> + 0x000000000000800a, 0x800000008000000a, 0x8000000080008081,
> + 0x8000000000008080, 0x0000000080000001, 0x8000000080008008
> +};
> +
> +static const int keccakf_rotc[24] = {
> + 1, 3, 6, 10, 15, 21, 28, 36, 45, 55, 2, 14,
> + 27, 41, 56, 8, 25, 43, 62, 18, 39, 61, 20, 44
> +};
> +
> +static const int keccakf_piln[24] = {
> + 10, 7, 11, 17, 18, 3, 5, 16, 8, 21, 24, 4,
> + 15, 23, 19, 13, 12, 2, 20, 14, 22, 9, 6, 1
> +};
> +
> +/* update the state with given number of rounds */
> +
> +static void keccakf(u64 st[25])
> +{
> + int i, j, round;
> + u64 t, bc[5];
> +
> + for (round = 0; round < KECCAK_ROUNDS; round++) {
> +
> + /* Theta */
> + for (i = 0; i < 5; i++)
> + bc[i] = st[i] ^ st[i + 5] ^ st[i + 10] ^ st[i + 15]
> + ^ st[i + 20];
> +
> + for (i = 0; i < 5; i++) {
> + t = bc[(i + 4) % 5] ^ ROTL64(bc[(i + 1) % 5], 1);
> + for (j = 0; j < 25; j += 5)
> + st[j + i] ^= t;
> + }
> +
> + /* Rho Pi */
> + t = st[1];
> + for (i = 0; i < 24; i++) {
> + j = keccakf_piln[i];
> + bc[0] = st[j];
> + st[j] = ROTL64(t, keccakf_rotc[i]);
> + t = bc[0];
> + }
> +
> + /* Chi */
> + for (j = 0; j < 25; j += 5) {
> + for (i = 0; i < 5; i++)
> + bc[i] = st[j + i];
> + for (i = 0; i < 5; i++)
> + st[j + i] ^= (~bc[(i + 1) % 5]) &
> + bc[(i + 2) % 5];
> + }
> +
> + /* Iota */
> + st[0] ^= keccakf_rndc[round];
> + }
> +}
> +
> +static void sha3_init(struct sha3_state *sctx, unsigned int digest_sz)
> +{
> + memset(sctx, 0, sizeof(*sctx));
> + sctx->md_len = digest_sz;
> + sctx->rsiz = 200 - 2 * digest_sz;
> + sctx->rsizw = sctx->rsiz / 8;
> +}
> +
> +static int sha3_224_init(struct shash_desc *desc)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> +
> + sha3_init(sctx, SHA3_224_DIGEST_SIZE);
> + return 0;
> +}
> +
> +static int sha3_256_init(struct shash_desc *desc)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> +
> + sha3_init(sctx, SHA3_256_DIGEST_SIZE);
> + return 0;
> +}
> +
> +static int sha3_384_init(struct shash_desc *desc)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> +
> + sha3_init(sctx, SHA3_384_DIGEST_SIZE);
> + return 0;
> +}
> +
> +static int sha3_512_init(struct shash_desc *desc)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> +
> + sha3_init(sctx, SHA3_512_DIGEST_SIZE);
> + return 0;
> +}
> +
> +static int sha3_update(struct shash_desc *desc, const u8 *data,
> + unsigned int len)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> + unsigned int done;
> + const u8 *src;
> +
> + done = 0;
> + src = data;
> +
> + if ((sctx->partial + len) > (sctx->rsiz - 1)) {
> + if (sctx->partial) {
> + done = -sctx->partial;
> + memcpy(sctx->buf + sctx->partial, data,
> + done + sctx->rsiz);
> + src = sctx->buf;
> + }
> +
> + do {
> + unsigned int i;
> +
> + for (i = 0; i < sctx->rsizw; i++)
> + sctx->st[i] ^= ((u64 *) src)[i];
> + keccakf(sctx->st);
> +
> + done += sctx->rsiz;
> + src = data + done;
> + } while (done + (sctx->rsiz - 1) < len);
> +
> + sctx->partial = 0;
> + }
> + memcpy(sctx->buf + sctx->partial, src, len - done);
> + sctx->partial += (len - done);
> +
> + return 0;
> +}
> +
> +static int sha3_final(struct shash_desc *desc, u8 *out)
> +{
> + struct sha3_state *sctx = shash_desc_ctx(desc);
> + unsigned int i, inlen = sctx->partial;
> +
> + sctx->buf[inlen++] = 0x06;
> + memset(sctx->buf + inlen, 0, sctx->rsiz - inlen);
> + sctx->buf[sctx->rsiz - 1] |= 0x80;
> +
> + for (i = 0; i < sctx->rsizw; i++)
> + sctx->st[i] ^= ((u64 *) sctx->buf)[i];
> +
> + keccakf(sctx->st);
> +
> + for (i = 0; i < sctx->rsizw; i++)
> + sctx->st[i] = cpu_to_le64(sctx->st[i]);
> +
> + memcpy(out, sctx->st, sctx->md_len);
> +
> + memset(sctx, 0, sizeof(*sctx));
> + return 0;
> +}
> +
> +static struct shash_alg sha3_224 = {
> + .digestsize = SHA3_224_DIGEST_SIZE,
> + .init = sha3_224_init,
> + .update = sha3_update,
> + .final = sha3_final,
> + .descsize = sizeof(struct sha3_state),
> + .base = {
> + .cra_name = "sha3-224",
> + .cra_driver_name = "sha3-224-generic",
> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
> + .cra_blocksize = SHA3_224_BLOCK_SIZE,
> + .cra_module = THIS_MODULE,
> + }
> +};
> +
> +static struct shash_alg sha3_256 = {
> + .digestsize = SHA3_256_DIGEST_SIZE,
> + .init = sha3_256_init,
> + .update = sha3_update,
> + .final = sha3_final,
> + .descsize = sizeof(struct sha3_state),
> + .base = {
> + .cra_name = "sha3-256",
> + .cra_driver_name = "sha3-256-generic",
> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
> + .cra_blocksize = SHA3_256_BLOCK_SIZE,
> + .cra_module = THIS_MODULE,
> + }
> +};
> +
> +static struct shash_alg sha3_384 = {
> + .digestsize = SHA3_384_DIGEST_SIZE,
> + .init = sha3_384_init,
> + .update = sha3_update,
> + .final = sha3_final,
> + .descsize = sizeof(struct sha3_state),
> + .base = {
> + .cra_name = "sha3-384",
> + .cra_driver_name = "sha3-384-generic",
> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
> + .cra_blocksize = SHA3_384_BLOCK_SIZE,
> + .cra_module = THIS_MODULE,
> + }
> +};
> +
> +static struct shash_alg sha3_512 = {
> + .digestsize = SHA3_512_DIGEST_SIZE,
> + .init = sha3_512_init,
> + .update = sha3_update,
> + .final = sha3_final,
> + .descsize = sizeof(struct sha3_state),
> + .base = {
> + .cra_name = "sha3-512",
> + .cra_driver_name = "sha3-512-generic",
> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
> + .cra_blocksize = SHA3_512_BLOCK_SIZE,
> + .cra_module = THIS_MODULE,
> + }
> +};
Shouldn't there be a priority here?
> +
> +static int __init sha3_generic_mod_init(void)
> +{
> + int ret;
> +
> + ret = crypto_register_shash(&sha3_224);
> + if (ret < 0)
> + goto err_out;
> + ret = crypto_register_shash(&sha3_256);
> + if (ret < 0)
> + goto err_out_224;
> + ret = crypto_register_shash(&sha3_384);
> + if (ret < 0)
> + goto err_out_256;
> + ret = crypto_register_shash(&sha3_512);
> + if (ret < 0)
> + goto err_out_384;
> +
> + return 0;
> +
> +err_out_384:
> + crypto_unregister_shash(&sha3_384);
> +err_out_256:
> + crypto_unregister_shash(&sha3_256);
> +err_out_224:
> + crypto_unregister_shash(&sha3_224);
> +err_out:
> + return ret;
> +}
> +
> +static void __exit sha3_generic_mod_fini(void)
> +{
> + crypto_unregister_shash(&sha3_224);
> + crypto_unregister_shash(&sha3_256);
> + crypto_unregister_shash(&sha3_384);
> + crypto_unregister_shash(&sha3_512);
> +}
> +
> +module_init(sha3_generic_mod_init);
> +module_exit(sha3_generic_mod_fini);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("SHA-3 Secure Hash Algorithm");
> +
> +MODULE_ALIAS("sha3-224");
> +MODULE_ALIAS("sha3-256");
> +MODULE_ALIAS("sha3-384");
> +MODULE_ALIAS("sha3-512");
MODULE_ALIAS_CRYPTO?
What about the aliases for cra_driver_name?
> diff --git a/include/crypto/sha3.h b/include/crypto/sha3.h
> new file mode 100644
> index 0000000..f4c9f68
> --- /dev/null
> +++ b/include/crypto/sha3.h
> @@ -0,0 +1,29 @@
> +/*
> + * Common values for SHA-3 algorithms
> + */
> +#ifndef __CRYPTO_SHA3_H__
> +#define __CRYPTO_SHA3_H__
> +
> +#define SHA3_224_DIGEST_SIZE (224 / 8)
> +#define SHA3_224_BLOCK_SIZE (200 - 2 * SHA3_224_DIGEST_SIZE)
> +
> +#define SHA3_256_DIGEST_SIZE (256 / 8)
> +#define SHA3_256_BLOCK_SIZE (200 - 2 * SHA3_256_DIGEST_SIZE)
> +
> +#define SHA3_384_DIGEST_SIZE (384 / 8)
> +#define SHA3_384_BLOCK_SIZE (200 - 2 * SHA3_384_DIGEST_SIZE)
> +
> +#define SHA3_512_DIGEST_SIZE (512 / 8)
> +#define SHA3_512_BLOCK_SIZE (200 - 2 * SHA3_512_DIGEST_SIZE)
> +
> +struct sha3_state {
> + u64 st[25];
> + unsigned int md_len;
> + unsigned int rsiz;
> + unsigned int rsizw;
> +
> + unsigned int partial;
> + u8 buf[SHA3_224_BLOCK_SIZE];
> +};
> +
> +#endif
Ciao
Stephan
Hi Stephan,
Thanks for the review comments. I will address it in the next patch.
Please look at my reply below against each comment.
Regards,
Raveendra
On Wed, Jun 15, 2016 at 5:12 PM, Stephan Mueller <[email protected]> wrote:
> Am Mittwoch, 15. Juni 2016, 15:11:58 schrieb Raveendra Padasalagi:
>
> Hi Raveendra,
>
>> From: Jeff Garzik <[email protected]>
>>
>> This patch adds the implementation of SHA3 algorithm
>> in software and it's based on original implementation
>> pushed in patch https://lwn.net/Articles/518415/ with
>> additional changes to match the padding rules specified
>> in SHA-3 specification.
>>
>> Signed-off-by: Jeff Garzik <[email protected]>
>> Signed-off-by: Raveendra Padasalagi <[email protected]>
>> ---
>> crypto/Kconfig | 10 ++
>> crypto/Makefile | 1 +
>> crypto/sha3_generic.c | 296
>> ++++++++++++++++++++++++++++++++++++++++++++++++++ include/crypto/sha3.h |
>> 29 +++++
>> 4 files changed, 336 insertions(+)
>> create mode 100644 crypto/sha3_generic.c
>> create mode 100644 include/crypto/sha3.h
>>
>> diff --git a/crypto/Kconfig b/crypto/Kconfig
>> index 1d33beb..83ee8cb 100644
>> --- a/crypto/Kconfig
>> +++ b/crypto/Kconfig
>> @@ -750,6 +750,16 @@ config CRYPTO_SHA512_SPARC64
>> SHA-512 secure hash standard (DFIPS 180-2) implemented
>> using sparc64 crypto instructions, when available.
>>
>> +config CRYPTO_SHA3
>> + tristate "SHA3 digest algorithm"
>> + select CRYPTO_HASH
>> + help
>> + SHA-3 secure hash standard (DFIPS 202). It's based on
>
> Typo DFIPS?
It's not typo, DFIPS mean here Draft FIPS 202.
Do you want me to put it in another way ?
>> + cryptographic sponge function family called Keccak.
>> +
>> + References:
>> + http://keccak.noekeon.org/
>> +
>> config CRYPTO_TGR192
>> tristate "Tiger digest algorithms"
>> select CRYPTO_HASH
>> diff --git a/crypto/Makefile b/crypto/Makefile
>> index 4f4ef7e..0b82c47 100644
>> --- a/crypto/Makefile
>> +++ b/crypto/Makefile
>> @@ -61,6 +61,7 @@ obj-$(CONFIG_CRYPTO_RMD320) += rmd320.o
>> obj-$(CONFIG_CRYPTO_SHA1) += sha1_generic.o
>> obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
>> obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
>> +obj-$(CONFIG_CRYPTO_SHA3) += sha3_generic.o
>> obj-$(CONFIG_CRYPTO_WP512) += wp512.o
>> obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
>> obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
>> diff --git a/crypto/sha3_generic.c b/crypto/sha3_generic.c
>> new file mode 100644
>> index 0000000..162dfc3
>> --- /dev/null
>> +++ b/crypto/sha3_generic.c
>> @@ -0,0 +1,296 @@
>> +/*
>> + * Cryptographic API.
>> + *
>> + * SHA-3, as specified in
>> + * http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.202.pdf
>> + *
>> + * SHA-3 code by Jeff Garzik <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify it
>> + * under the terms of the GNU General Public License as published by the
>> Free + * Software Foundation; either version 2 of the License, or (at your
>> option)• + * any later version.
>> + *
>> + */
>> +#include <crypto/internal/hash.h>
>> +#include <linux/init.h>
>> +#include <linux/module.h>
>> +#include <linux/types.h>
>> +#include <crypto/sha3.h>
>> +#include <asm/byteorder.h>
>> +
>> +#define KECCAK_ROUNDS 24
>> +
>> +#define ROTL64(x, y) (((x) << (y)) | ((x) >> (64 - (y))))
>> +
>> +static const u64 keccakf_rndc[24] = {
>> + 0x0000000000000001, 0x0000000000008082, 0x800000000000808a,
>> + 0x8000000080008000, 0x000000000000808b, 0x0000000080000001,
>> + 0x8000000080008081, 0x8000000000008009, 0x000000000000008a,
>> + 0x0000000000000088, 0x0000000080008009, 0x000000008000000a,
>> + 0x000000008000808b, 0x800000000000008b, 0x8000000000008089,
>> + 0x8000000000008003, 0x8000000000008002, 0x8000000000000080,
>> + 0x000000000000800a, 0x800000008000000a, 0x8000000080008081,
>> + 0x8000000000008080, 0x0000000080000001, 0x8000000080008008
>> +};
>> +
>> +static const int keccakf_rotc[24] = {
>> + 1, 3, 6, 10, 15, 21, 28, 36, 45, 55, 2, 14,
>> + 27, 41, 56, 8, 25, 43, 62, 18, 39, 61, 20, 44
>> +};
>> +
>> +static const int keccakf_piln[24] = {
>> + 10, 7, 11, 17, 18, 3, 5, 16, 8, 21, 24, 4,
>> + 15, 23, 19, 13, 12, 2, 20, 14, 22, 9, 6, 1
>> +};
>> +
>> +/* update the state with given number of rounds */
>> +
>> +static void keccakf(u64 st[25])
>> +{
>> + int i, j, round;
>> + u64 t, bc[5];
>> +
>> + for (round = 0; round < KECCAK_ROUNDS; round++) {
>> +
>> + /* Theta */
>> + for (i = 0; i < 5; i++)
>> + bc[i] = st[i] ^ st[i + 5] ^ st[i + 10] ^ st[i + 15]
>> + ^ st[i + 20];
>> +
>> + for (i = 0; i < 5; i++) {
>> + t = bc[(i + 4) % 5] ^ ROTL64(bc[(i + 1) % 5], 1);
>> + for (j = 0; j < 25; j += 5)
>> + st[j + i] ^= t;
>> + }
>> +
>> + /* Rho Pi */
>> + t = st[1];
>> + for (i = 0; i < 24; i++) {
>> + j = keccakf_piln[i];
>> + bc[0] = st[j];
>> + st[j] = ROTL64(t, keccakf_rotc[i]);
>> + t = bc[0];
>> + }
>> +
>> + /* Chi */
>> + for (j = 0; j < 25; j += 5) {
>> + for (i = 0; i < 5; i++)
>> + bc[i] = st[j + i];
>> + for (i = 0; i < 5; i++)
>> + st[j + i] ^= (~bc[(i + 1) % 5]) &
>> + bc[(i + 2) % 5];
>> + }
>> +
>> + /* Iota */
>> + st[0] ^= keccakf_rndc[round];
>> + }
>> +}
>> +
>> +static void sha3_init(struct sha3_state *sctx, unsigned int digest_sz)
>> +{
>> + memset(sctx, 0, sizeof(*sctx));
>> + sctx->md_len = digest_sz;
>> + sctx->rsiz = 200 - 2 * digest_sz;
>> + sctx->rsizw = sctx->rsiz / 8;
>> +}
>> +
>> +static int sha3_224_init(struct shash_desc *desc)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> +
>> + sha3_init(sctx, SHA3_224_DIGEST_SIZE);
>> + return 0;
>> +}
>> +
>> +static int sha3_256_init(struct shash_desc *desc)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> +
>> + sha3_init(sctx, SHA3_256_DIGEST_SIZE);
>> + return 0;
>> +}
>> +
>> +static int sha3_384_init(struct shash_desc *desc)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> +
>> + sha3_init(sctx, SHA3_384_DIGEST_SIZE);
>> + return 0;
>> +}
>> +
>> +static int sha3_512_init(struct shash_desc *desc)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> +
>> + sha3_init(sctx, SHA3_512_DIGEST_SIZE);
>> + return 0;
>> +}
>> +
>> +static int sha3_update(struct shash_desc *desc, const u8 *data,
>> + unsigned int len)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> + unsigned int done;
>> + const u8 *src;
>> +
>> + done = 0;
>> + src = data;
>> +
>> + if ((sctx->partial + len) > (sctx->rsiz - 1)) {
>> + if (sctx->partial) {
>> + done = -sctx->partial;
>> + memcpy(sctx->buf + sctx->partial, data,
>> + done + sctx->rsiz);
>> + src = sctx->buf;
>> + }
>> +
>> + do {
>> + unsigned int i;
>> +
>> + for (i = 0; i < sctx->rsizw; i++)
>> + sctx->st[i] ^= ((u64 *) src)[i];
>> + keccakf(sctx->st);
>> +
>> + done += sctx->rsiz;
>> + src = data + done;
>> + } while (done + (sctx->rsiz - 1) < len);
>> +
>> + sctx->partial = 0;
>> + }
>> + memcpy(sctx->buf + sctx->partial, src, len - done);
>> + sctx->partial += (len - done);
>> +
>> + return 0;
>> +}
>> +
>> +static int sha3_final(struct shash_desc *desc, u8 *out)
>> +{
>> + struct sha3_state *sctx = shash_desc_ctx(desc);
>> + unsigned int i, inlen = sctx->partial;
>> +
>> + sctx->buf[inlen++] = 0x06;
>> + memset(sctx->buf + inlen, 0, sctx->rsiz - inlen);
>> + sctx->buf[sctx->rsiz - 1] |= 0x80;
>> +
>> + for (i = 0; i < sctx->rsizw; i++)
>> + sctx->st[i] ^= ((u64 *) sctx->buf)[i];
>> +
>> + keccakf(sctx->st);
>> +
>> + for (i = 0; i < sctx->rsizw; i++)
>> + sctx->st[i] = cpu_to_le64(sctx->st[i]);
>> +
>> + memcpy(out, sctx->st, sctx->md_len);
>> +
>> + memset(sctx, 0, sizeof(*sctx));
>> + return 0;
>> +}
>> +
>> +static struct shash_alg sha3_224 = {
>> + .digestsize = SHA3_224_DIGEST_SIZE,
>> + .init = sha3_224_init,
>> + .update = sha3_update,
>> + .final = sha3_final,
>> + .descsize = sizeof(struct sha3_state),
>> + .base = {
>> + .cra_name = "sha3-224",
>> + .cra_driver_name = "sha3-224-generic",
>> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
>> + .cra_blocksize = SHA3_224_BLOCK_SIZE,
>> + .cra_module = THIS_MODULE,
>> + }
>> +};
>> +
>> +static struct shash_alg sha3_256 = {
>> + .digestsize = SHA3_256_DIGEST_SIZE,
>> + .init = sha3_256_init,
>> + .update = sha3_update,
>> + .final = sha3_final,
>> + .descsize = sizeof(struct sha3_state),
>> + .base = {
>> + .cra_name = "sha3-256",
>> + .cra_driver_name = "sha3-256-generic",
>> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
>> + .cra_blocksize = SHA3_256_BLOCK_SIZE,
>> + .cra_module = THIS_MODULE,
>> + }
>> +};
>> +
>> +static struct shash_alg sha3_384 = {
>> + .digestsize = SHA3_384_DIGEST_SIZE,
>> + .init = sha3_384_init,
>> + .update = sha3_update,
>> + .final = sha3_final,
>> + .descsize = sizeof(struct sha3_state),
>> + .base = {
>> + .cra_name = "sha3-384",
>> + .cra_driver_name = "sha3-384-generic",
>> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
>> + .cra_blocksize = SHA3_384_BLOCK_SIZE,
>> + .cra_module = THIS_MODULE,
>> + }
>> +};
>> +
>> +static struct shash_alg sha3_512 = {
>> + .digestsize = SHA3_512_DIGEST_SIZE,
>> + .init = sha3_512_init,
>> + .update = sha3_update,
>> + .final = sha3_final,
>> + .descsize = sizeof(struct sha3_state),
>> + .base = {
>> + .cra_name = "sha3-512",
>> + .cra_driver_name = "sha3-512-generic",
>> + .cra_flags = CRYPTO_ALG_TYPE_SHASH,
>> + .cra_blocksize = SHA3_512_BLOCK_SIZE,
>> + .cra_module = THIS_MODULE,
>> + }
>> +};
>
> Shouldn't there be a priority here?
Yes, I will fix it in next patch.
>> +
>> +static int __init sha3_generic_mod_init(void)
>> +{
>> + int ret;
>> +
>> + ret = crypto_register_shash(&sha3_224);
>> + if (ret < 0)
>> + goto err_out;
>> + ret = crypto_register_shash(&sha3_256);
>> + if (ret < 0)
>> + goto err_out_224;
>> + ret = crypto_register_shash(&sha3_384);
>> + if (ret < 0)
>> + goto err_out_256;
>> + ret = crypto_register_shash(&sha3_512);
>> + if (ret < 0)
>> + goto err_out_384;
>> +
>> + return 0;
>> +
>> +err_out_384:
>> + crypto_unregister_shash(&sha3_384);
>> +err_out_256:
>> + crypto_unregister_shash(&sha3_256);
>> +err_out_224:
>> + crypto_unregister_shash(&sha3_224);
>> +err_out:
>> + return ret;
>> +}
>> +
>> +static void __exit sha3_generic_mod_fini(void)
>> +{
>> + crypto_unregister_shash(&sha3_224);
>> + crypto_unregister_shash(&sha3_256);
>> + crypto_unregister_shash(&sha3_384);
>> + crypto_unregister_shash(&sha3_512);
>> +}
>> +
>> +module_init(sha3_generic_mod_init);
>> +module_exit(sha3_generic_mod_fini);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("SHA-3 Secure Hash Algorithm");
>> +
>> +MODULE_ALIAS("sha3-224");
>> +MODULE_ALIAS("sha3-256");
>> +MODULE_ALIAS("sha3-384");
>> +MODULE_ALIAS("sha3-512");
>
> MODULE_ALIAS_CRYPTO?
>
> What about the aliases for cra_driver_name?
Yes, I will fix it in next patch.
>> diff --git a/include/crypto/sha3.h b/include/crypto/sha3.h
>> new file mode 100644
>> index 0000000..f4c9f68
>> --- /dev/null
>> +++ b/include/crypto/sha3.h
>> @@ -0,0 +1,29 @@
>> +/*
>> + * Common values for SHA-3 algorithms
>> + */
>> +#ifndef __CRYPTO_SHA3_H__
>> +#define __CRYPTO_SHA3_H__
>> +
>> +#define SHA3_224_DIGEST_SIZE (224 / 8)
>> +#define SHA3_224_BLOCK_SIZE (200 - 2 * SHA3_224_DIGEST_SIZE)
>> +
>> +#define SHA3_256_DIGEST_SIZE (256 / 8)
>> +#define SHA3_256_BLOCK_SIZE (200 - 2 * SHA3_256_DIGEST_SIZE)
>> +
>> +#define SHA3_384_DIGEST_SIZE (384 / 8)
>> +#define SHA3_384_BLOCK_SIZE (200 - 2 * SHA3_384_DIGEST_SIZE)
>> +
>> +#define SHA3_512_DIGEST_SIZE (512 / 8)
>> +#define SHA3_512_BLOCK_SIZE (200 - 2 * SHA3_512_DIGEST_SIZE)
>> +
>> +struct sha3_state {
>> + u64 st[25];
>> + unsigned int md_len;
>> + unsigned int rsiz;
>> + unsigned int rsizw;
>> +
>> + unsigned int partial;
>> + u8 buf[SHA3_224_BLOCK_SIZE];
>> +};
>> +
>> +#endif
>
>
> Ciao
> Stephan
Am Donnerstag, 16. Juni 2016, 14:44:57 schrieb Raveendra Padasalagi:
Hi Raveendra,
> > Typo DFIPS?
>
> It's not typo, DFIPS mean here Draft FIPS 202.
> Do you want me to put it in another way ?
I have never seen DFIPS. Besides, most FIPS standards are drafts (including of
FIPS 140-2 :-) ), because it would require a signature from some ministry big-
wig in the US govt to "release" it. Hence, I expect that it would retain its
draft state for a long time :-)
But if DFIPS is what you think is right, leave it :-)
Ciao
Stephan
Hi Stephan,
Yes, I was initially thinking of to put it as FIPS but looked at the
existing "crypto/Kconfig"
for other algorithms and found it to be using DFIPS. So kept this also
the same :)
I need some clarification to address your comment
"Shouldn't there be a priority here?"
What I know regarding priority value for an algorithm
is higher the priority value it will be get selected for execution.
For example, let's say for software implementation of the algorithm if
priority value
is specified as 100 and hardware driver implementation of the same
algorithm uses
the priority value of 300 then hardware algo is what selected for execution.
I just had a look at priority value specified for other hash
algorithm's and none of the
software implementation specify any value, So it will be 0.
I think it's okay to not to specify any priority value for software
implementation,
as hardware implementation can use non zero value if it needs higher priority.
What's your opinion ?
Regards,
Raveendra
On Thu, Jun 16, 2016 at 9:10 PM, Stephan Mueller <[email protected]> wrote:
> Am Donnerstag, 16. Juni 2016, 14:44:57 schrieb Raveendra Padasalagi:
>
> Hi Raveendra,
>
>> > Typo DFIPS?
>>
>> It's not typo, DFIPS mean here Draft FIPS 202.
>> Do you want me to put it in another way ?
>
> I have never seen DFIPS. Besides, most FIPS standards are drafts (including of
> FIPS 140-2 :-) ), because it would require a signature from some ministry big-
> wig in the US govt to "release" it. Hence, I expect that it would retain its
> draft state for a long time :-)
>
> But if DFIPS is what you think is right, leave it :-)
>
> Ciao
> Stephan
Am Donnerstag, 16. Juni 2016, 21:39:17 schrieb Raveendra Padasalagi:
Hi Raveendra,
> I need some clarification to address your comment
>
> "Shouldn't there be a priority here?"
>
> What I know regarding priority value for an algorithm
> is higher the priority value it will be get selected for execution.
>
> For example, let's say for software implementation of the algorithm if
> priority value
> is specified as 100 and hardware driver implementation of the same
> algorithm uses
> the priority value of 300 then hardware algo is what selected for execution.
>
> I just had a look at priority value specified for other hash
> algorithm's and none of the
> software implementation specify any value, So it will be 0.
>
> I think it's okay to not to specify any priority value for software
> implementation,
> as hardware implementation can use non zero value if it needs higher
> priority.
>
> What's your opinion ?
You are fully correct.
To be in line with the other hashes, maybe let us leave it at 0. I was
thinking about "backend" ciphers that should never ever be selected (like the
Intel AES-NI examples) which should have a lower prio than any other cipher.
But then, they have unique cra_names, so it does not really matter :-)
Ciao
Stephan