This is useful for systems that are known not have the necessary support
for e4defrag to run (fallocate() and EXT4_IOC_MOVE_EXT support). It cannot
be determined at compile time whether the target kernel will have them.
---
configure | 24 ++++++++++++++++++++++++
configure.in | 18 ++++++++++++++++++
misc/Makefile.in | 4 ++--
3 files changed, 44 insertions(+), 2 deletions(-)
diff --git a/configure b/configure
index 14d9652..9e6d39e 100755
--- a/configure
+++ b/configure
@@ -675,6 +675,7 @@ FSCK_MAN
FSCK_PROG
RESIZER_CMT
IMAGER_CMT
+DEFRAG_CMT
DEBUGFS_CMT
BLKID_CMT
DEPPROFILED_LIBBLKID
@@ -803,6 +804,7 @@ enable_libblkid
enable_debugfs
enable_imager
enable_resizer
+enable_defrag
enable_fsck
enable_e2initrd_helper
enable_tls
@@ -1454,6 +1456,7 @@ Optional Features:
--disable-debugfs disable support of debugfs program
--disable-imager disable support of e2image program
--disable-resizer disable support of e2resize program
+ --disable-defrag disable support of e4defrag program
--enable-fsck build fsck wrapper program
--enable-e2initrd-helper build e2initrd-helper program
--disable-tls disable use of thread local support
@@ -5396,6 +5399,27 @@ RESIZER_CMT=
fi
+# Check whether --enable-defrag was given.
+if test "${enable_defrag+set}" = set; then :
+ enableval=$enable_defrag; if test "$enableval" = "no"
+then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Disabling e4defrag support" >&5
+$as_echo "Disabling e4defrag support" >&6; }
+ DEFRAG_CMT="#"
+else
+ DEFRAG_CMT=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Enabling e4defrag support" >&5
+$as_echo "Enabling e4defrag support" >&6; }
+fi
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Enabling e4defrag support by default" >&5
+$as_echo "Enabling e4defrag support by default" >&6; }
+DEFRAG_CMT=
+
+fi
+
+
# Check whether --enable-fsck was given.
if test "${enable_fsck+set}" = set; then :
enableval=$enable_fsck; if test "$enableval" = "no"
diff --git a/configure.in b/configure.in
index 5e67688..13ea07a 100644
--- a/configure.in
+++ b/configure.in
@@ -577,6 +577,24 @@ RESIZER_CMT=
)
AC_SUBST(RESIZER_CMT)
dnl
+dnl handle --enable-defrag
+dnl
+AC_ARG_ENABLE([defrag],
+[ --disable-defrag disable support of e4defrag program],
+if test "$enableval" = "no"
+then
+ AC_MSG_RESULT([Disabling e4defrag support])
+ DEFRAG_CMT="#"
+else
+ DEFRAG_CMT=
+ AC_MSG_RESULT([Enabling e4defrag support])
+fi
+,
+AC_MSG_RESULT([Enabling e4defrag support by default])
+DEFRAG_CMT=
+)
+AC_SUBST(DEFRAG_CMT)
+dnl
dnl See whether to install the `fsck' wrapper program (that calls e2fsck)
dnl
AC_ARG_ENABLE([fsck],
diff --git a/misc/Makefile.in b/misc/Makefile.in
index 8fd7704..d905e14 100644
--- a/misc/Makefile.in
+++ b/misc/Makefile.in
@@ -11,8 +11,8 @@ INSTALL = @INSTALL@
@MCONFIG@
-@LINUX_CMT@E4DEFRAG_PROG= e4defrag
-@LINUX_CMT@E4DEFRAG_MAN= e4defrag.8
+@DEFRAG_CMT@@LINUX_CMT@E4DEFRAG_PROG= e4defrag
+@DEFRAG_CMT@@LINUX_CMT@E4DEFRAG_MAN= e4defrag.8
@IMAGER_CMT@E2IMAGE_PROG= e2image
@IMAGER_CMT@E2IMAGE_MAN= e2image.8
--
1.4.4.2
Building e2fsprogs with older userspace with old kernel headers may
not define the __NR_fallocate and __NR_sync_file_range system calls,
even if a newer kernel is installed on the system.
Avoid e4defrag build failures for e2fsprogs on older systems, but may
result in the e4defrag command failing at runtime due to the actual
lack of these system calls, as opposed to just old kernel headers
on a system running a new kernel.
---
misc/e4defrag.c | 31 +++++++++++++++++++++++--------
1 files changed, 23 insertions(+), 8 deletions(-)
diff --git a/misc/e4defrag.c b/misc/e4defrag.c
index 82e3868..d739da2 100644
--- a/misc/e4defrag.c
+++ b/misc/e4defrag.c
@@ -304,12 +304,6 @@ static int posix_fadvise(int fd, loff_t offset, size_t len, int advise)
#ifndef HAVE_SYNC_FILE_RANGE
#warning Using locally defined sync_file_range interface.
-#ifndef __NR_sync_file_range
-#ifndef __NR_sync_file_range2 /* ppc */
-#error Your kernel headers dont define __NR_sync_file_range
-#endif
-#endif
-
/*
* sync_file_range() - Sync file region.
*
@@ -322,8 +316,19 @@ int sync_file_range(int fd, loff_t offset, loff_t length, unsigned int flag)
{
#ifdef __NR_sync_file_range
return syscall(__NR_sync_file_range, fd, offset, length, flag);
-#else
+#elif defined(__NR_sync_file_range2)
return syscall(__NR_sync_file_range2, fd, flag, offset, length);
+#else
+ return fsync(fd);
+#ifndef SYNC_FILE_RANGE_WAIT_BEFORE
+#define SYNC_FILE_RANGE_WAIT_BEFORE 0
+#endif
+#ifndef SYNC_FILE_RANGE_WRITE
+#define SYNC_FILE_RANGE_WRITE 0
+#endif
+#ifndef SYNC_FILE_RANGE_WAIT_AFTER
+#define SYNC_FILE_RANGE_WAIT_AFTER 0
+#endif
#endif
}
#endif /* ! HAVE_SYNC_FILE_RANGE */
@@ -332,7 +337,17 @@ int sync_file_range(int fd, loff_t offset, loff_t length, unsigned int flag)
#warning Using locally defined fallocate syscall interface.
#ifndef __NR_fallocate
-#error Your kernel headers dont define __NR_fallocate
+# if defined(__x86_64__)
+# define __NR_fallocate 285
+# elif defined(__i386__)
+# define __NR_fallocate 324
+# elif defined(__powerpc__)
+# define __NR_fallocate 309
+# else
+/* fallback position might be posix_fallocate(), but I suspect any kernel
+ * that doesn't have fallocate will also not have EXT4_IOC_MOVE_EXT */
+# error Your kernel headers dont define __NR_fallocate
+# endif
#endif
/*
--
1.4.4.2