Hi,
[this is on rawhide: mke2fs 1.41.4 (27-Jan-2009)
Using EXT2FS Library version 1.41.4 ]
FWIW, I was trying to create an ext4 file system with more than 2^32
blocks to demonstrate a parted bug fix, but with the particular device
I was using, I couldn't even create one with 2^31-1 blocks.
When I try to create an ext4 file system specifying both block size and
the number of blocks, the size of the underlying device should not matter,
as long as it is large enough.
However, when the underlying device too large, it fails like this:
Set-up: Create a 10TB sparse device called /dev/mapper/s1 with
/dev/sdb6 (just ~20GB) for backing store:
N=$(echo '10*2*1024^3'|bc)
echo "0 $N zero" | dmsetup create zero1
echo "0 $N snapshot /dev/mapper/zero1 /dev/sdb6 p 128" | dmsetup create s1
Try to create an ext4 file system with 2^31-1 1024-byte blocks:
(note that I specify an explicit number of blocks)
# mkfs.ext4 -b 1024 /dev/mapper/s1 $(echo '2*1024^3-1'|bc|tee /dev/tty)
2147483647
mke2fs 1.41.4 (27-Jan-2009)
mkfs.ext4: Size of device /dev/mapper/s1 too big to be expressed in 32 bits
using a blocksize of 4096.
[Exit 1]
I can understand failing like that when the "blocks-count" argument
is omitted, because then we're asking mkfs.ext4 to use the entire
device.
Regards,
Jim
PS. let me know if you'd like a BZ for this, and I'll fill out the form
On Wed, Feb 11, 2009 at 01:50:39PM +0100, Jim Meyering wrote:
>
> FWIW, I was trying to create an ext4 file system with more than 2^32
> blocks to demonstrate a parted bug fix, but with the particular device
> I was using, I couldn't even create one with 2^31-1 blocks.
>
> When I try to create an ext4 file system specifying both block size and
> the number of blocks, the size of the underlying device should not matter,
> as long as it is large enough.
Oops, my fault. I fixed the case where the device was exactly 16TB
(as in created via lvcreate --size 16TB, but the fix was very minimal,
since it was just before a maintenance release. I didn't consider (or
test) the case where the device was larger than or equal to 2*32
blocks (given a specified blocksize, or 4k if no blocksize was
specified), and an explicit block size less than 2*32 was specified.
I'll put it on my todo list to fix for e2fsprogs 1.41.5.
- Ted
On Wed, Feb 11, 2009 at 09:09:05AM -0500, Theodore Tso wrote:
> On Wed, Feb 11, 2009 at 01:50:39PM +0100, Jim Meyering wrote:
> >
> > FWIW, I was trying to create an ext4 file system with more than 2^32
> > blocks to demonstrate a parted bug fix, but with the particular device
> > I was using, I couldn't even create one with 2^31-1 blocks.
> >
> > When I try to create an ext4 file system specifying both block size and
> > the number of blocks, the size of the underlying device should not matter,
> > as long as it is large enough.
>
> Oops, my fault. I fixed the case where the device was exactly 16TB
> (as in created via lvcreate --size 16TB, but the fix was very minimal,
> since it was just before a maintenance release. I didn't consider (or
> test) the case where the device was larger than or equal to 2*32
> blocks (given a specified blocksize, or 4k if no blocksize was
> specified), and an explicit block size less than 2*32 was specified.
>
> I'll put it on my todo list to fix for e2fsprogs 1.41.5.
Note that this is fixed in effect by the 64bit patches, since we use
the 64bit get device size function.
git://git.kernel.org/pub/scm/fs/ext2/val/e2fsprogs.git
Branch "shared-64bit".
-VAL
Valerie Aurora Henson wrote:
> On Wed, Feb 11, 2009 at 09:09:05AM -0500, Theodore Tso wrote:
>> On Wed, Feb 11, 2009 at 01:50:39PM +0100, Jim Meyering wrote:
>>> FWIW, I was trying to create an ext4 file system with more than 2^32
>>> blocks to demonstrate a parted bug fix, but with the particular device
>>> I was using, I couldn't even create one with 2^31-1 blocks.
>>>
>>> When I try to create an ext4 file system specifying both block size and
>>> the number of blocks, the size of the underlying device should not matter,
>>> as long as it is large enough.
>> Oops, my fault. I fixed the case where the device was exactly 16TB
>> (as in created via lvcreate --size 16TB, but the fix was very minimal,
>> since it was just before a maintenance release. I didn't consider (or
>> test) the case where the device was larger than or equal to 2*32
>> blocks (given a specified blocksize, or 4k if no blocksize was
>> specified), and an explicit block size less than 2*32 was specified.
>>
>> I'll put it on my todo list to fix for e2fsprogs 1.41.5.
>
> Note that this is fixed in effect by the 64bit patches, since we use
> the 64bit get device size function.
>
> git://git.kernel.org/pub/scm/fs/ext2/val/e2fsprogs.git
>
> Branch "shared-64bit".
>
> -VAL
That won't fix it for ext3 though will it? (not that I've looked in
detail) but the issue is not whether we can properly get the device
size; it's that the device size, rather than the filesystem size, is
checked for overflow vs. the filesystem's limits...
-Eric
On Wed, Feb 11, 2009 at 01:32:34PM -0600, Eric Sandeen wrote:
> Valerie Aurora Henson wrote:
> > On Wed, Feb 11, 2009 at 09:09:05AM -0500, Theodore Tso wrote:
> >> On Wed, Feb 11, 2009 at 01:50:39PM +0100, Jim Meyering wrote:
> >>> FWIW, I was trying to create an ext4 file system with more than 2^32
> >>> blocks to demonstrate a parted bug fix, but with the particular device
> >>> I was using, I couldn't even create one with 2^31-1 blocks.
> >>>
> >>> When I try to create an ext4 file system specifying both block size and
> >>> the number of blocks, the size of the underlying device should not matter,
> >>> as long as it is large enough.
> >> Oops, my fault. I fixed the case where the device was exactly 16TB
> >> (as in created via lvcreate --size 16TB, but the fix was very minimal,
> >> since it was just before a maintenance release. I didn't consider (or
> >> test) the case where the device was larger than or equal to 2*32
> >> blocks (given a specified blocksize, or 4k if no blocksize was
> >> specified), and an explicit block size less than 2*32 was specified.
> >>
> >> I'll put it on my todo list to fix for e2fsprogs 1.41.5.
> >
> > Note that this is fixed in effect by the 64bit patches, since we use
> > the 64bit get device size function.
> >
> > git://git.kernel.org/pub/scm/fs/ext2/val/e2fsprogs.git
> >
> > Branch "shared-64bit".
> >
> > -VAL
>
> That won't fix it for ext3 though will it? (not that I've looked in
> detail) but the issue is not whether we can properly get the device
> size; it's that the device size, rather than the filesystem size, is
> checked for overflow vs. the filesystem's limits...
Without actually going to the effort of trying to understand that code
again :), what I remember is that it's the order of the checks that
mattered. When we used the 32-bit device size function, that would
fail before we got around to checking the user-specified number of
blocks to be in range. Now the 64-bit call works and we can go on to
the range check for the user-specified number of blocks.
At any rate, it works for 2^31-1 4096 byte blocks:
[val@clunky e2fsprogs]$ ls -lh /terabyte/20TB -rw-rw-r-- 1 val val 19T 2009-02-11 13:11 /terabyte/20TB
[val@clunky e2fsprogs]$ ~/src/build/misc/mke2fs -b 4096 -t ext3 /terabyte/20TB `echo '2*1024^3-1'|bc`
mke2fs 1.41.4 (27-Jan-2009)
/terabyte/20TB is not a block special device.
Proceed anyway? (y,n) y
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
536870912 inodes, 2147483647 blocks
[etc]
It doesn't work for 1024 byte blocks - fails on number of inodes no
matter how few inodes I specify. This might be a bug but I don't have
time to check it out right now.
-VAL