Below are included some of the tests from the Lustre "sanity.sh" script,
which tests filesystem behaviour in a variety of ways. Some of them are
very simple and might concievably be removed, but are not necessarily bad.
I've removed the tests that depend on Lustre-specific behaviour.
It probably isn't useful to use this test script directly, since it
depends on a number of helper functions, but it is definitely useful
as a starting point for adding new tests to xfstests.
Unfortunately, a bunch of tests had to be removed since they depend on
Lustre's fault-injection code, but they would be useful for testing
generic filesystem behaviour (e.g. ENOMEM or ENOSPC handling). There
is also a helper program we use "multiop" which is a toolbox program
that I could supply separately, if you want.
Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.
============================================================================
TMP=${TMP:-/tmp}
[ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
[ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
rm -rf $DIR/[Rdfs][0-9]*
# $RUNAS_ID may get set incorrectly somewhere else
[ $UID -eq 0 -a $RUNAS_ID -eq 0 ] && error "\$RUNAS_ID set to 0, but \$UID is also 0!"
echo "preparing for tests involving mounts"
EXT2_DEV=${EXT2_DEV:-$TMP/SANITY.LOOP}
touch $EXT2_DEV
mke2fs -j -F $EXT2_DEV 8000 > /dev/null
echo # add a newline after mke2fs.
umask 077
test_0() {
touch $DIR/$tfile
$CHECKSTAT -t file $DIR/$tfile || error
rm $DIR/$tfile
$CHECKSTAT -a $DIR/$tfile || error
}
run_test 0 "touch .../$tfile ; rm .../$tfile"
test_0b() {
chmod 0755 $DIR || error
$CHECKSTAT -p 0755 $DIR || error
}
run_test 0b "chmod 0755 $DIR"
test_1a() {
mkdir $DIR/d1
mkdir $DIR/d1/d2
mkdir $DIR/d1/d2 && error "we expect EEXIST, but not returned"
$CHECKSTAT -t dir $DIR/d1/d2 || error
}
run_test 1a "mkdir .../d1; mkdir .../d1/d2"
test_1b() {
rmdir $DIR/d1/d2
rmdir $DIR/d1
$CHECKSTAT -a $DIR/d1 || error
}
run_test 1b "rmdir .../d1/d2; rmdir .../d1"
test_2a() {
mkdir $DIR/d2
touch $DIR/d2/f
$CHECKSTAT -t file $DIR/d2/f || error
}
run_test 2a "mkdir .../d2; touch .../d2/f"
test_2b() {
rm -r $DIR/d2
$CHECKSTAT -a $DIR/d2 || error
}
run_test 2b "rm -r .../d2; checkstat .../d2/f"
test_3a() {
mkdir $DIR/d3
$CHECKSTAT -t dir $DIR/d3 || error
}
run_test 3a "mkdir .../d3"
test_3b() {
if [ ! -d $DIR/d3 ]; then
mkdir $DIR/d3
fi
touch $DIR/d3/f
$CHECKSTAT -t file $DIR/d3/f || error
}
run_test 3b "touch .../d3/f"
test_3c() {
rm -r $DIR/d3
$CHECKSTAT -a $DIR/d3 || error
}
run_test 3c "rm -r .../d3"
test_4a() {
mkdir $DIR/d4
$CHECKSTAT -t dir $DIR/d4 || error
}
run_test 4a "mkdir .../d4"
test_4b() {
if [ ! -d $DIR/d4 ]; then
mkdir $DIR/d4
fi
mkdir $DIR/d4/d2
$CHECKSTAT -t dir $DIR/d4/d2 || error
}
run_test 4b "mkdir .../d4/d2"
test_5() {
mkdir $DIR/d5
mkdir $DIR/d5/d2
chmod 0707 $DIR/d5/d2
$CHECKSTAT -t dir -p 0707 $DIR/d5/d2 || error
}
run_test 5 "mkdir .../d5 .../d5/d2; chmod .../d5/d2"
test_6a() {
touch $DIR/f6a
chmod 0666 $DIR/f6a || error
$CHECKSTAT -t file -p 0666 -u \#$UID $DIR/f6a || error
}
run_test 6a "touch .../f6a; chmod .../f6a"
test_6b() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
if [ ! -f $DIR/f6a ]; then
touch $DIR/f6a
chmod 0666 $DIR/f6a
fi
$RUNAS chmod 0444 $DIR/f6a && error
$CHECKSTAT -t file -p 0666 -u \#$UID $DIR/f6a || error
}
run_test 6b "$RUNAS chmod .../f6a (should return error)""
test_6c() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
touch $DIR/f6c
chown $RUNAS_ID $DIR/f6c || error
$CHECKSTAT -t file -u \#$RUNAS_ID $DIR/f6c || error
}
run_test 6c "touch .../f6c; chown .../f6c"
test_6d() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
if [ ! -f $DIR/f6c ]; then
touch $DIR/f6c
chown $RUNAS_ID $DIR/f6c
fi
$RUNAS chown $UID $DIR/f6c && error
$CHECKSTAT -t file -u \#$RUNAS_ID $DIR/f6c || error
}
run_test 6d "$RUNAS chown .../f6c (should return error)""
test_6e() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
touch $DIR/f6e
chgrp $RUNAS_ID $DIR/f6e || error
$CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/f6e || error
}
run_test 6e "touch .../f6e; chgrp .../f6e"
test_6f() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
if [ ! -f $DIR/f6e ]; then
touch $DIR/f6e
chgrp $RUNAS_ID $DIR/f6e
fi
$RUNAS chgrp $UID $DIR/f6e && error
$CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/f6e || error
}
run_test 6f "$RUNAS chgrp .../f6e (should return error)""
test_6g() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
mkdir $DIR/d6g || error
chmod 777 $DIR/d6g || error
$RUNAS mkdir $DIR/d6g/d || error
chmod g+s $DIR/d6g/d || error
mkdir $DIR/d6g/d/subdir
$CHECKSTAT -g \#$RUNAS_ID $DIR/d6g/d/subdir || error
}
run_test 6g "Is new dir in sgid dir inheriting group?"
test_6h() { # bug 7331
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
touch $DIR/f6h || error "touch failed"
chown $RUNAS_ID:$RUNAS_ID $DIR/f6h || error "initial chown failed"
$RUNAS -G$RUNAS_ID chown $RUNAS_ID:0 $DIR/f6h && error "chown worked"
$CHECKSTAT -t file -u \#$RUNAS_ID -g \#$RUNAS_ID $DIR/f6h || error
}
run_test 6h "$RUNAS chown RUNAS_ID.0 .../f6h (should return error)"
test_7a() {
mkdir $DIR/d7
$MCREATE $DIR/d7/f
chmod 0666 $DIR/d7/f
$CHECKSTAT -t file -p 0666 $DIR/d7/f || error
}
run_test 7a "mkdir .../d7; mcreate .../d7/f; chmod .../d7/f""
test_7b() {
if [ ! -d $DIR/d7 ]; then
mkdir $DIR/d7
fi
$MCREATE $DIR/d7/f2
echo -n foo > $DIR/d7/f2
[ "`cat $DIR/d7/f2`"" "foo" ] || error
$CHECKSTAT -t file -s 3 $DIR/d7/f2 || error
}
run_test 7b "mkdir .../d7; mcreate d7/f2; echo foo > d7/f2"
test_8() {
mkdir $DIR/d8
touch $DIR/d8/f
chmod 0666 $DIR/d8/f
$CHECKSTAT -t file -p 0666 $DIR/d8/f || error
}
run_test 8 "mkdir .../d8; touch .../d8/f; chmod .../d8/f"
test_9() {
mkdir $DIR/d9
mkdir $DIR/d9/d2
mkdir $DIR/d9/d2/d3
$CHECKSTAT -t dir $DIR/d9/d2/d3 || error
}
run_test 9 "mkdir .../d9 .../d9/d2 .../d9/d2/d3"
test_10() {
mkdir $DIR/d10
mkdir $DIR/d10/d2
touch $DIR/d10/d2/f
$CHECKSTAT -t file $DIR/d10/d2/f || error
}
run_test 10 "mkdir .../d10 .../d10/d2; touch .../d10/d2/f"
test_11() {
mkdir $DIR/d11
mkdir $DIR/d11/d2
chmod 0666 $DIR/d11/d2
chmod 0705 $DIR/d11/d2
$CHECKSTAT -t dir -p 0705 $DIR/d11/d2 || error
}
run_test 11 "mkdir .../d11 d11/d2; chmod .../d11/d2"
test_12() {
mkdir $DIR/d12
touch $DIR/d12/f
chmod 0666 $DIR/d12/f
chmod 0654 $DIR/d12/f
$CHECKSTAT -t file -p 0654 $DIR/d12/f || error
}
run_test 12 "touch .../d12/f; chmod .../d12/f .../d12/f"
test_13() {
mkdir $DIR/d13
dd if=/dev/zero of=$DIR/d13/f count=10
> $DIR/d13/f
$CHECKSTAT -t file -s 0 $DIR/d13/f || error
}
run_test 13 "creat .../d13/f; dd .../d13/f; > .../d13/f"
test_14() {
mkdir $DIR/d14
touch $DIR/d14/f
rm $DIR/d14/f
$CHECKSTAT -a $DIR/d14/f || error
}
run_test 14 "touch .../d14/f; rm .../d14/f; rm .../d14/f"
test_15() {
mkdir $DIR/d15
touch $DIR/d15/f
mv $DIR/d15/f $DIR/d15/f2
$CHECKSTAT -t file $DIR/d15/f2 || error
}
run_test 15 "touch .../d15/f; mv .../d15/f .../d15/f2"
test_16() {
mkdir $DIR/d16
touch $DIR/d16/f
rm -rf $DIR/d16/f
$CHECKSTAT -a $DIR/d16/f || error
}
run_test 16 "touch .../d16/f; rm -rf .../d16/f"
test_17a() {
mkdir -p $DIR/d17
touch $DIR/d17/f
ln -s $DIR/d17/f $DIR/d17/l-exist
ls -l $DIR/d17
$CHECKSTAT -l $DIR/d17/f $DIR/d17/l-exist || error
$CHECKSTAT -f -t f $DIR/d17/l-exist || error
rm -f $DIR/d17/l-exist
$CHECKSTAT -a $DIR/d17/l-exist || error
}
run_test 17a "symlinks: create, remove (real)"
test_17b() {
mkdir -p $DIR/d17
ln -s no-such-file $DIR/d17/l-dangle
ls -l $DIR/d17
$CHECKSTAT -l no-such-file $DIR/d17/l-dangle || error
$CHECKSTAT -fa $DIR/d17/l-dangle || error
rm -f $DIR/d17/l-dangle
$CHECKSTAT -a $DIR/d17/l-dangle || error
}
run_test 17b "symlinks: create, remove (dangling)"
test_17c() { # bug 3440 - don't save failed open RPC for replay
mkdir -p $DIR/d17
ln -s foo $DIR/d17/f17c
cat $DIR/d17/f17c && error "opened non-existent symlink" || true
}
run_test 17c "symlinks: open dangling (should return error)""
test_17d() {
mkdir -p $DIR/d17
ln -s foo $DIR/d17/f17d
touch $DIR/d17/f17d || error "creating to new symlink"
}
run_test 17d "symlinks: create dangling"
test_17e() {
mkdir -p $DIR/$tdir
local foo=$DIR/$tdir/$tfile
ln -s $foo $foo || error "create symlink failed"
ls -l $foo || error "ls -l failed"
ls $foo && error "ls not failed" || true
}
run_test 17e "symlinks: create recursive symlink (should return error)""
test_17f() {
mkdir -p $DIR/d17f
ln -s 1234567890/2234567890/3234567890/4234567890 $DIR/d17f/111
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890 $DIR/d17f/222
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890 $DIR/d17f/333
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890 $DIR/d17f/444
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890 $DIR/d17f/555
ln -s 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890/aaaaaaaaaa/bbbbbbbbbb/cccccccccc/dddddddddd/eeeeeeeeee/ffffffffff/ $DIR/d17f/666
ls -l $DIR/d17f
}
run_test 17f "symlinks: long and very long symlink name"
test_17g() {
mkdir -p $DIR/$tdir
LONGSYMLINK="$(dd if=/dev/zero bs=4095 count=1 | tr '\0' 'x')"
ln -s $LONGSYMLINK $DIR/$tdir/$tfile
ls -l $DIR/$tdir
}
run_test 17g "symlinks: really long symlink name"
test_17h() { #bug 17378
mkdir -p $DIR/$tdir
$SETSTRIPE $DIR/$tdir -c -1
#define OBD_FAIL_MDS_LOV_PREP_CREATE 0x141
do_facet mds lctl set_param fail_loc=0x80000141
touch $DIR/$tdir/$tfile || true
}
run_test 17h "create objects: lov_free_memmd() doesn't lbug"
test_18() {
touch $DIR/f
ls $DIR || error
}
run_test 18 "touch .../f ; ls ..."
test_19a() {
touch $DIR/f19
ls -l $DIR
rm $DIR/f19
$CHECKSTAT -a $DIR/f19 || error
}
run_test 19a "touch .../f19 ; ls -l ... ; rm .../f19"
test_19b() {
ls -l $DIR/f19 && error || true
}
run_test 19b "ls -l .../f19 (should return error)"
test_19c() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
$RUNAS touch $DIR/f19 && error || true
}
run_test 19c "$RUNAS touch .../f19 (should return error)""
test_19d() {
cat $DIR/f19 && error || true
}
run_test 19d "cat .../f19 (should return error)"
test_20() {
touch $DIR/f
rm $DIR/f
log "1 done"
touch $DIR/f
rm $DIR/f
log "2 done"
touch $DIR/f
rm $DIR/f
log "3 done"
$CHECKSTAT -a $DIR/f || error
}
run_test 20 "touch .../f ; ls -l ..."
test_21() {
mkdir $DIR/d21
[ -f $DIR/d21/dangle ] && rm -f $DIR/d21/dangle
ln -s dangle $DIR/d21/link
echo foo >> $DIR/d21/link
cat $DIR/d21/dangle
$CHECKSTAT -t link $DIR/d21/link || error
$CHECKSTAT -f -t file $DIR/d21/link || error
}
run_test 21 "write to dangling link"
test_22() {
WDIR=$DIR/$tdir
mkdir -p $WDIR
chown $RUNAS_ID $WDIR
(cd $WDIR || error "cd $WDIR failed";
$RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
$RUNAS tar xf -)
ls -lR $WDIR/etc || error "ls -lR $WDIR/etc failed"
$CHECKSTAT -t dir $WDIR/etc || error "checkstat -t dir failed"
$CHECKSTAT -u \#$RUNAS_ID $WDIR/etc || error "checkstat -u failed"
}
run_test 22 "unpack tar archive as non-root user"
test_23() {
mkdir -p $DIR/$tdir
local file=$DIR/$tdir/$tfile
openfile -f O_CREAT:O_EXCL $file || error "$file create failed"
openfile -f O_CREAT:O_EXCL $file &&
error "$file recreate succeeded" || true
}
run_test 23 "O_CREAT|O_EXCL in subdir"
test_24a() {
echo '== rename sanity"
echo '-- same directory rename'
mkdir $DIR/R1
touch $DIR/R1/f
mv $DIR/R1/f $DIR/R1/g
$CHECKSTAT -t file $DIR/R1/g || error
}
run_test 24a "touch .../R1/f; rename .../R1/f .../R1/g"
test_24b() {
mkdir $DIR/R2
touch $DIR/R2/{f,g}
mv $DIR/R2/f $DIR/R2/g
$CHECKSTAT -a $DIR/R2/f || error
$CHECKSTAT -t file $DIR/R2/g || error
}
run_test 24b "touch .../R2/{f,g}; rename .../R2/f .../R2/g"
test_24c() {
mkdir $DIR/R3
mkdir $DIR/R3/f
mv $DIR/R3/f $DIR/R3/g
$CHECKSTAT -a $DIR/R3/f || error
$CHECKSTAT -t dir $DIR/R3/g || error
}
run_test 24c "mkdir .../R3/f; rename .../R3/f .../R3/g"
test_24d() {
mkdir $DIR/R4
mkdir $DIR/R4/{f,g}
mrename $DIR/R4/f $DIR/R4/g
$CHECKSTAT -a $DIR/R4/f || error
$CHECKSTAT -t dir $DIR/R4/g || error
}
run_test 24d "mkdir .../R4/{f,g}; rename .../R4/f .../R4/g"
test_24e() {
echo '-- cross directory renames --'
mkdir $DIR/R5{a,b}
touch $DIR/R5a/f
mv $DIR/R5a/f $DIR/R5b/g
$CHECKSTAT -a $DIR/R5a/f || error
$CHECKSTAT -t file $DIR/R5b/g || error
}
run_test 24e "touch .../R5a/f; rename .../R5a/f .../R5b/g"
test_24f() {
mkdir $DIR/R6{a,b}
touch $DIR/R6a/f $DIR/R6b/g
mv $DIR/R6a/f $DIR/R6b/g
$CHECKSTAT -a $DIR/R6a/f || error
$CHECKSTAT -t file $DIR/R6b/g || error
}
run_test 24f "touch .../R6a/f R6b/g; mv .../R6a/f .../R6b/g""
test_24g() {
mkdir $DIR/R7{a,b}
mkdir $DIR/R7a/d
mv $DIR/R7a/d $DIR/R7b/e
$CHECKSTAT -a $DIR/R7a/d || error
$CHECKSTAT -t dir $DIR/R7b/e || error
}
run_test 24g "mkdir .../R7{a,b}/d; mv .../R7a/d .../R7b/e"
test_24h() {
mkdir $DIR/R8{a,b}
mkdir $DIR/R8a/d $DIR/R8b/e
mrename $DIR/R8a/d $DIR/R8b/e
$CHECKSTAT -a $DIR/R8a/d || error
$CHECKSTAT -t dir $DIR/R8b/e || error
}
run_test 24h "mkdir .../R8{a,b}/{d,e}; rename .../R8a/d .../R8b/e"
test_24i() {
echo "-- rename error cases"
mkdir $DIR/R9
mkdir $DIR/R9/a
touch $DIR/R9/f
mrename $DIR/R9/f $DIR/R9/a
$CHECKSTAT -t file $DIR/R9/f || error
$CHECKSTAT -t dir $DIR/R9/a || error
$CHECKSTAT -a $DIR/R9/a/f || error
}
run_test 24i "rename file to dir error: touch f ; mkdir a ; rename f a"
test_24j() {
mkdir $DIR/R10
mrename $DIR/R10/f $DIR/R10/g
$CHECKSTAT -t dir $DIR/R10 || error
$CHECKSTAT -a $DIR/R10/f || error
$CHECKSTAT -a $DIR/R10/g || error
}
run_test 24j "source does not exist"
test_24k() {
mkdir $DIR/R11a $DIR/R11a/d
touch $DIR/R11a/f
mv $DIR/R11a/f $DIR/R11a/d
$CHECKSTAT -a $DIR/R11a/f || error
$CHECKSTAT -t file $DIR/R11a/d/f || error
}
run_test 24k "touch .../R11a/f; mv .../R11a/f .../R11a/d"
# bug 2429 - rename foo foo foo creates invalid file
test_24l() {
f="$DIR/f24l"
multiop $f OcNs || error
}
run_test 24l "Renaming a file to itself"
test_24m() {
f="$DIR/f24m"
multiop $f OcLN ${f}2 ${f}2 || error "link ${f}2 ${f}2 failed"
# on ext3 this does not remove either the source or target files
# though the "expected" operation would be to remove the source
$CHECKSTAT -t file ${f} || error "${f} missing"
$CHECKSTAT -t file ${f}2 || error "${f}2 missing"
}
run_test 24m "Renaming a file to a hard link to itself"
test_24n() {
f="$DIR/f24n"
# this stats the old file after it was renamed, so it should fail
touch ${f}
$CHECKSTAT ${f}
mv ${f} ${f}.rename
$CHECKSTAT ${f}.rename
$CHECKSTAT -a ${f}
}
run_test 24n "Statting the old file after renaming (Posix rename 2)"
test_24o() {
check_kernel_version 37 || return 0
mkdir -p $DIR/d24o
rename_many -s random -v -n 10 $DIR/d24o
}
run_test 24o "rename of files during htree split"
test_24p() {
mkdir $DIR/R12{a,b}
DIRINO=`ls -lid $DIR/R12a | awk '{ print $1 }'`
mrename $DIR/R12a $DIR/R12b
$CHECKSTAT -a $DIR/R12a || error
$CHECKSTAT -t dir $DIR/R12b || error
DIRINO2=`ls -lid $DIR/R12b | awk '{ print $1 }'`
[ "$DIRINO"" "$DIRINO2" ] || error "R12a $DIRINO != R12b $DIRINO2"
}
run_test 24p "mkdir .../R12{a,b}; rename .../R12a .../R12b"
test_24q() {
mkdir $DIR/R13{a,b}
DIRINO=`ls -lid $DIR/R13a | awk '{ print $1 }'`
multiop_bg_pause $DIR/R13b D_c || return 1
MULTIPID=$!
mrename $DIR/R13a $DIR/R13b
$CHECKSTAT -a $DIR/R13a || error
$CHECKSTAT -t dir $DIR/R13b || error
DIRINO2=`ls -lid $DIR/R13b | awk '{ print $1 }'`
[ "$DIRINO"" "$DIRINO2" ] || error "R13a $DIRINO != R13b $DIRINO2"
kill -USR1 $MULTIPID
wait $MULTIPID || error "multiop close failed"
}
run_test 24q "mkdir .../R13{a,b}; open R13b rename R13a R13b""
test_24r() { #bug 3789
mkdir $DIR/R14a $DIR/R14a/b
mrename $DIR/R14a $DIR/R14a/b && error "rename to subdir worked!"
$CHECKSTAT -t dir $DIR/R14a || error "$DIR/R14a missing"
$CHECKSTAT -t dir $DIR/R14a/b || error "$DIR/R14a/b missing"
}
run_test 24r "mkdir .../R14a/b; rename .../R14a .../R14a/b"
test_24s() {
mkdir $DIR/R15a $DIR/R15a/b $DIR/R15a/b/c
mrename $DIR/R15a $DIR/R15a/b/c && error "rename to sub-subdir worked!"
$CHECKSTAT -t dir $DIR/R15a || error "$DIR/R15a missing"
$CHECKSTAT -t dir $DIR/R15a/b/c || error "$DIR/R15a/b/c missing"
}
run_test 24s "mkdir .../R15a/b/c; rename .../R15a .../R15a/b/c""
test_24t() {
mkdir $DIR/R16a $DIR/R16a/b $DIR/R16a/b/c
mrename $DIR/R16a/b/c $DIR/R16a && error "rename to sub-subdir worked!"
$CHECKSTAT -t dir $DIR/R16a || error "$DIR/R16a missing"
$CHECKSTAT -t dir $DIR/R16a/b/c || error "$DIR/R16a/b/c missing"
}
run_test 24t "mkdir .../R16a/b/c; rename .../R16a/b/c .../R16a""
test_24u() { # bug12192
multiop $DIR/$tfile C2w$((2048 * 1024))c || error
$CHECKSTAT -s $((2048 * 1024)) $DIR/$tfile || error "wrong file size"
}
run_test 24u "create stripe file"
test_25a() {
echo '== symlink sanity"
mkdir $DIR/d25
ln -s d25 $DIR/s25
touch $DIR/s25/foo || error
}
run_test 25a "create file in symlinked directory"
test_25b() {
[ ! -d $DIR/d25 ] && test_25a
$CHECKSTAT -t file $DIR/s25/foo || error
}
run_test 25b "lookup file in symlinked directory""
test_26a() {
mkdir $DIR/d26
mkdir $DIR/d26/d26-2
ln -s d26/d26-2 $DIR/s26
touch $DIR/s26/foo || error
}
run_test 26a "multiple component symlink""
test_26b() {
mkdir -p $DIR/d26b/d26-2
ln -s d26b/d26-2/foo $DIR/s26-2
touch $DIR/s26-2 || error
}
run_test 26b "multiple component symlink at end of lookup""
test_26c() {
mkdir $DIR/d26.2
touch $DIR/d26.2/foo
ln -s d26.2 $DIR/s26.2-1
ln -s s26.2-1 $DIR/s26.2-2
ln -s s26.2-2 $DIR/s26.2-3
chmod 0666 $DIR/s26.2-3/foo
}
run_test 26c "chain of symlinks""
# recursive symlinks (bug 439)
test_26d() {
ln -s d26-3/foo $DIR/d26-3
}
run_test 26d "create multiple component recursive symlink""
test_26e() {
[ ! -h $DIR/d26-3 ] && test_26d
rm $DIR/d26-3
}
run_test 26e "unlink multiple component recursive symlink""
# recursive symlinks (bug 7022)
test_26f() {
mkdir -p $DIR/$tdir
mkdir $DIR/$tdir/$tfile || error "mkdir $DIR/$tdir/$tfile failed"
cd $DIR/$tdir/$tfile || error "cd $DIR/$tdir/$tfile failed"
mkdir -p lndir/bar1 || error "mkdir lndir/bar1 failed"
mkdir $tfile || error "mkdir $tfile failed"
cd $tfile || error "cd $tfile failed"
ln -s .. dotdot || error "ln dotdot failed"
ln -s dotdot/lndir lndir || error "ln lndir failed"
cd $DIR/$tdir || error "cd $DIR/$tdir failed"
output=`ls $tfile/$tfile/lndir/bar1`
[ "$output"" bar1 ] && error "unexpected output"
rm -r $tfile || error "rm $tfile failed"
$CHECKSTAT -a $DIR/$tfile || error "$tfile not gone"
}
run_test 26f "rm -r of a directory which has recursive symlink""
# createtest also checks that device nodes are created and
# then visible correctly (#2091)
test_28() { # bug 2091
mkdir $DIR/d28
$CREATETEST $DIR/d28/ct || error
}
run_test 28 "create/mknod/mkdir with bad file types""
test_30() {
cp `which ls` $DIR || cp /bin/ls $DIR
$DIR/ls /
rm $DIR/ls
}
run_test 30 "run binary from Lustre (execve)""
test_31a() {
$OPENUNLINK $DIR/f31 $DIR/f31 || error
$CHECKSTAT -a $DIR/f31 || error
}
run_test 31a "open-unlink file""
test_31b() {
touch $DIR/f31 || error
ln $DIR/f31 $DIR/f31b || error
multiop $DIR/f31b Ouc || error
$CHECKSTAT -t file $DIR/f31 || error
}
run_test 31b "unlink file with multiple links while open""
test_31c() {
touch $DIR/f31 || error
ln $DIR/f31 $DIR/f31c || error
multiop_bg_pause $DIR/f31 O_uc || return 1
MULTIPID=$!
multiop $DIR/f31c Ouc
kill -USR1 $MULTIPID
wait $MULTIPID
}
run_test 31c "open-unlink file with multiple links""
test_31d() {
opendirunlink $DIR/d31d $DIR/d31d || error
$CHECKSTAT -a $DIR/d31d || error
}
run_test 31d "remove of open directory""
test_31e() { # bug 2904
check_kernel_version 34 || return 0
openfilleddirunlink $DIR/d31e || error
}
run_test 31e "remove of open non-empty directory""
test_31f() { # bug 4554
set -vx
mkdir $DIR/d31f
$SETSTRIPE $DIR/d31f -s 1048576 -c 1
cp /etc/hosts $DIR/d31f
ls -l $DIR/d31f
multiop_bg_pause $DIR/d31f D_c || return 1
MULTIPID=$!
rm -rv $DIR/d31f || error "first of $DIR/d31f"
mkdir $DIR/d31f
$SETSTRIPE $DIR/d31f -s 1048576 -c 1
cp /etc/hosts $DIR/d31f
ls -l $DIR/d31f
$DIR/d31f/hosts
multiop_bg_pause $DIR/d31f D_c || return 1
MULTIPID2=$!
kill -USR1 $MULTIPID || error "first opendir $MULTIPID not running"
wait $MULTIPID || error "first opendir $MULTIPID failed"
sleep 6
kill -USR1 $MULTIPID2 || error "second opendir $MULTIPID not running"
wait $MULTIPID2 || error "second opendir $MULTIPID2 failed"
set +vx
}
run_test 31f "remove of open directory with open-unlink file""
test_31g() {
echo "-- cross directory link --"
mkdir $DIR/d31g{a,b}
touch $DIR/d31ga/f
ln $DIR/d31ga/f $DIR/d31gb/g
$CHECKSTAT -t file $DIR/d31ga/f || error "source"
[ `stat -c%h $DIR/d31ga/f`" '2' ] || error "source nlink"
$CHECKSTAT -t file $DIR/d31gb/g || error "target"
[ `stat -c%h $DIR/d31gb/g`" '2' ] || error "target nlink"
}
run_test 31g "cross directory link==============="
test_31h() {
echo "-- cross directory link --"
mkdir $DIR/d31h
mkdir $DIR/d31h/dir
touch $DIR/d31h/f
ln $DIR/d31h/f $DIR/d31h/dir/g
$CHECKSTAT -t file $DIR/d31h/f || error "source"
[ `stat -c%h $DIR/d31h/f`" '2' ] || error "source nlink"
$CHECKSTAT -t file $DIR/d31h/dir/g || error "target"
[ `stat -c%h $DIR/d31h/dir/g`" '2' ] || error "target nlink"
}
run_test 31h "cross directory link under child==============="
test_31i() {
echo "-- cross directory link --"
mkdir $DIR/d31i
mkdir $DIR/d31i/dir
touch $DIR/d31i/dir/f
ln $DIR/d31i/dir/f $DIR/d31i/g
$CHECKSTAT -t file $DIR/d31i/dir/f || error "source"
[ `stat -c%h $DIR/d31i/dir/f`" '2' ] || error "source nlink"
$CHECKSTAT -t file $DIR/d31i/g || error "target"
[ `stat -c%h $DIR/d31i/g`" '2' ] || error "target nlink"
}
run_test 31i "cross directory link under parent==============="
test_31j() {
mkdir $DIR/d31j
mkdir $DIR/d31j/dir1
ln $DIR/d31j/dir1 $DIR/d31j/dir2 && error "ln for dir"
link $DIR/d31j/dir1 $DIR/d31j/dir3 && error "link for dir"
mlink $DIR/d31j/dir1 $DIR/d31j/dir4 && error "mlink for dir"
mlink $DIR/d31j/dir1 $DIR/d31j/dir1 && error "mlink to the same dir"
return 0
}
run_test 31j "link for directory==============="
test_31k() {
mkdir $DIR/d31k
touch $DIR/d31k/s
touch $DIR/d31k/exist
mlink $DIR/d31k/s $DIR/d31k/t || error "mlink"
mlink $DIR/d31k/s $DIR/d31k/exist && error "mlink to exist file"
mlink $DIR/d31k/s $DIR/d31k/s && error "mlink to the same file"
mlink $DIR/d31k/s $DIR/d31k && error "mlink to parent dir"
mlink $DIR/d31k $DIR/d31k/s && error "mlink parent dir to target"
mlink $DIR/d31k/not-exist $DIR/d31k/foo && error "mlink non-existing to new"
mlink $DIR/d31k/not-exist $DIR/d31k/s && error "mlink non-existing to exist"
return 0
}
run_test 31k "link to file: the same, non-existing, dir==============="
test_31m() {
mkdir $DIR/d31m
touch $DIR/d31m/s
mkdir $DIR/d31m2
touch $DIR/d31m2/exist
mlink $DIR/d31m/s $DIR/d31m2/t || error "mlink"
mlink $DIR/d31m/s $DIR/d31m2/exist && error "mlink to exist file"
mlink $DIR/d31m/s $DIR/d31m2 && error "mlink to parent dir"
mlink $DIR/d31m2 $DIR/d31m/s && error "mlink parent dir to target"
mlink $DIR/d31m/not-exist $DIR/d31m2/foo && error "mlink non-existing to new"
mlink $DIR/d31m/not-exist $DIR/d31m2/s && error "mlink non-existing to exist"
return 0
}
run_test 31m "link to file: the same, non-existing, dir==============="
test_32a() {
echo "== more mountpoints and symlinks""
[ -e $DIR/d32a ] && rm -fr $DIR/d32a
mkdir -p $DIR/d32a/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32a/ext2-mountpoint || error
$CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32a/ext2-mountpoint || error
}
run_test 32a "stat d32a/ext2-mountpoint/..""
test_32b() {
[ -e $DIR/d32b ] && rm -fr $DIR/d32b
mkdir -p $DIR/d32b/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32b/ext2-mountpoint || error
ls -al $DIR/d32b/ext2-mountpoint/.. || error
$UMOUNT $DIR/d32b/ext2-mountpoint || error
}
run_test 32b "open d32b/ext2-mountpoint/..""
test_32c() {
[ -e $DIR/d32c ] && rm -fr $DIR/d32c
mkdir -p $DIR/d32c/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32c/ext2-mountpoint || error
mkdir -p $DIR/d32c/d2/test_dir
$CHECKSTAT -t dir $DIR/d32c/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32c/ext2-mountpoint || error
}
run_test 32c "stat d32c/ext2-mountpoint/../d2/test_dir""
test_32d() {
[ -e $DIR/d32d ] && rm -fr $DIR/d32d
mkdir -p $DIR/d32d/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32d/ext2-mountpoint || error
mkdir -p $DIR/d32d/d2/test_dir
ls -al $DIR/d32d/ext2-mountpoint/../d2/test_dir || error
$UMOUNT $DIR/d32d/ext2-mountpoint || error
}
run_test 32d "open d32d/ext2-mountpoint/../d2/test_dir""
test_32e() {
[ -e $DIR/d32e ] && rm -fr $DIR/d32e
mkdir -p $DIR/d32e/tmp
TMP_DIR=$DIR/d32e/tmp
ln -s $DIR/d32e $TMP_DIR/symlink11
ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32e/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32e/symlink01 || error
}
run_test 32e "stat d32e/symlink->tmp/symlink->lustre-subdir""
test_32f() {
[ -e $DIR/d32f ] && rm -fr $DIR/d32f
mkdir -p $DIR/d32f/tmp
TMP_DIR=$DIR/d32f/tmp
ln -s $DIR/d32f $TMP_DIR/symlink11
ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls $DIR/d32f/tmp/symlink11 || error
ls $DIR/d32f/symlink01 || error
}
run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir""
test_32g() {
TMP_DIR=$DIR/$tdir/tmp
mkdir -p $TMP_DIR $DIR/${tdir}2
ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $TMP_DIR/symlink12 || error
$CHECKSTAT -t link $DIR/$tdir/symlink02 || error
$CHECKSTAT -t dir -f $TMP_DIR/symlink12 || error
$CHECKSTAT -t dir -f $DIR/$tdir/symlink02 || error
}
run_test 32g "stat d32g/symlink->tmp/symlink->lustre-subdir/${tdir}2"
test_32h() {
rm -fr $DIR/$tdir $DIR/${tdir}2
TMP_DIR=$DIR/$tdir/tmp
mkdir -p $TMP_DIR $DIR/${tdir}2
ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
ls $TMP_DIR/symlink12 || error
ls $DIR/$tdir/symlink02 || error
}
run_test 32h "open d32h/symlink->tmp/symlink->lustre-subdir/${tdir}2"
test_32i() {
[ -e $DIR/d32i ] && rm -fr $DIR/d32i
mkdir -p $DIR/d32i/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32i/ext2-mountpoint || error
touch $DIR/d32i/test_file
$CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
$UMOUNT $DIR/d32i/ext2-mountpoint || error
}
run_test 32i "stat d32i/ext2-mountpoint/../test_file""
test_32j() {
[ -e $DIR/d32j ] && rm -fr $DIR/d32j
mkdir -p $DIR/d32j/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32j/ext2-mountpoint || error
touch $DIR/d32j/test_file
cat $DIR/d32j/ext2-mountpoint/../test_file || error
$UMOUNT $DIR/d32j/ext2-mountpoint || error
}
run_test 32j "open d32j/ext2-mountpoint/../test_file""
test_32k() {
rm -fr $DIR/d32k
mkdir -p $DIR/d32k/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
mkdir -p $DIR/d32k/d2
touch $DIR/d32k/d2/test_file || error
$CHECKSTAT -t file $DIR/d32k/ext2-mountpoint/../d2/test_file || error
$UMOUNT $DIR/d32k/ext2-mountpoint || error
}
run_test 32k "stat d32k/ext2-mountpoint/../d2/test_file""
test_32l() {
rm -fr $DIR/d32l
mkdir -p $DIR/d32l/ext2-mountpoint
mount -t ext2 -o loop $EXT2_DEV $DIR/d32l/ext2-mountpoint || error
mkdir -p $DIR/d32l/d2
touch $DIR/d32l/d2/test_file
cat $DIR/d32l/ext2-mountpoint/../d2/test_file || error
$UMOUNT $DIR/d32l/ext2-mountpoint || error
}
run_test 32l "open d32l/ext2-mountpoint/../d2/test_file""
test_32m() {
rm -fr $DIR/d32m
mkdir -p $DIR/d32m/tmp
TMP_DIR=$DIR/d32m/tmp
ln -s $DIR $TMP_DIR/symlink11
ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
$CHECKSTAT -t link $DIR/d32m/tmp/symlink11 || error
$CHECKSTAT -t link $DIR/d32m/symlink01 || error
}
run_test 32m "stat d32m/symlink->tmp/symlink->lustre-root""
test_32n() {
rm -fr $DIR/d32n
mkdir -p $DIR/d32n/tmp
TMP_DIR=$DIR/d32n/tmp
ln -s $DIR $TMP_DIR/symlink11
ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
ls -l $DIR/d32n/tmp/symlink11 || error
ls -l $DIR/d32n/symlink01 || error
}
run_test 32n "open d32n/symlink->tmp/symlink->lustre-root""
test_32o() {
rm -fr $DIR/d32o $DIR/$tfile
touch $DIR/$tfile
mkdir -p $DIR/d32o/tmp
TMP_DIR=$DIR/d32o/tmp
ln -s $DIR/$tfile $TMP_DIR/symlink12
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
$CHECKSTAT -t link $DIR/d32o/tmp/symlink12 || error
$CHECKSTAT -t link $DIR/d32o/symlink02 || error
$CHECKSTAT -t file -f $DIR/d32o/tmp/symlink12 || error
$CHECKSTAT -t file -f $DIR/d32o/symlink02 || error
}
run_test 32o "stat d32o/symlink->tmp/symlink->lustre-root/$tfile"
test_32p() {
log 32p_1
rm -fr $DIR/d32p
log 32p_2
rm -f $DIR/$tfile
log 32p_3
touch $DIR/$tfile
log 32p_4
mkdir -p $DIR/d32p/tmp
log 32p_5
TMP_DIR=$DIR/d32p/tmp
log 32p_6
ln -s $DIR/$tfile $TMP_DIR/symlink12
log 32p_7
ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
log 32p_8
cat $DIR/d32p/tmp/symlink12 || error
log 32p_9
cat $DIR/d32p/symlink02 || error
log 32p_10
}
run_test 32p "open d32p/symlink->tmp/symlink->lustre-root/$tfile"
test_32q() {
[ -e $DIR/d32q ] && rm -fr $DIR/d32q
mkdir -p $DIR/d32q
touch $DIR/d32q/under_the_mount
mount -t ext2 -o loop $EXT2_DEV $DIR/d32q
ls $DIR/d32q/under_the_mount && error || true
$UMOUNT $DIR/d32q || error
}
run_test 32q "stat follows mountpoints in Lustre (should return error)"
test_32r() {
[ -e $DIR/d32r ] && rm -fr $DIR/d32r
mkdir -p $DIR/d32r
touch $DIR/d32r/under_the_mount
mount -t ext2 -o loop $EXT2_DEV $DIR/d32r
ls $DIR/d32r | grep -q under_the_mount && error || true
$UMOUNT $DIR/d32r || error
}
run_test 32r "opendir follows mountpoints in Lustre (should return error)"
test_33() {
rm -f $DIR/$tfile
touch $DIR/$tfile
chmod 444 $DIR/$tfile
chown $RUNAS_ID $DIR/$tfile
log 33_1
$RUNAS $OPENFILE -f O_RDWR $DIR/$tfile && error || true
log 33_2
}
run_test 33 "write file with mode 444 (should return error)""
test_33a() {
rm -fr $DIR/d33
mkdir -p $DIR/d33
chown $RUNAS_ID $DIR/d33
$RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33|| error "create"
$RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33 && \
error "open RDWR" || true
}
run_test 33a "test open file(mode=0444) with O_RDWR (should return error)"
test_33b() {
rm -fr $DIR/d33
mkdir -p $DIR/d33
chown $RUNAS_ID $DIR/d33
$RUNAS $OPENFILE -f 1286739555 $DIR/d33/f33 && error "create" || true
}
run_test 33b "test open file with malformed flags (No panic and return error)"
TEST_34_SIZE=${TEST_34_SIZE:-2000000000000}
test_34a() {
rm -f $DIR/f34
$MCREATE $DIR/f34 || error
$TRUNCATE $DIR/f34 $TEST_34_SIZE || error
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34a "truncate file that has not been opened""
test_34b() {
[ ! -f $DIR/f34 ] && test_34a
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
$OPENFILE -f O_RDONLY $DIR/f34
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34b "O_RDONLY opening file doesn't create objects""
test_34c() {
[ ! -f $DIR/f34 ] && test_34a
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
$OPENFILE -f O_RDWR $DIR/f34
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
}
run_test 34c "O_RDWR opening file-with-size works""
test_34d() {
[ ! -f $DIR/f34 ] && test_34a
dd if=/dev/zero of=$DIR/f34 conv=notrunc bs=4k count=1 || error
$CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
rm $DIR/f34
}
run_test 34d "write to sparse file""
test_34e() {
rm -f $DIR/f34e
$MCREATE $DIR/f34e || error
$TRUNCATE $DIR/f34e 1000 || error
$CHECKSTAT -s 1000 $DIR/f34e || error
$OPENFILE -f O_RDWR $DIR/f34e
$CHECKSTAT -s 1000 $DIR/f34e || error
}
run_test 34e "create objects, some with size and some without""
test_34f() { # bug 6242, 6243
SIZE34F=48000
rm -f $DIR/f34f
$MCREATE $DIR/f34f || error
$TRUNCATE $DIR/f34f $SIZE34F || error "truncating $DIR/f3f to $SIZE34F"
dd if=$DIR/f34f of=$TMP/f34f
$CHECKSTAT -s $SIZE34F $TMP/f34f || error "$TMP/f34f not $SIZE34F bytes"
dd if=/dev/zero of=$TMP/f34fzero bs=$SIZE34F count=1
cmp $DIR/f34f $TMP/f34fzero || error "$DIR/f34f not all zero"
cmp $TMP/f34f $TMP/f34fzero || error "$TMP/f34f not all zero"
rm $TMP/f34f $TMP/f34fzero $DIR/f34f
}
run_test 34f "read from a file with no objects until EOF""
test_35a() {
cp /bin/sh $DIR/f35a
chmod 444 $DIR/f35a
chown $RUNAS_ID $DIR/f35a
$RUNAS $DIR/f35a && error || true
rm $DIR/f35a
}
run_test 35a "exec file with mode 444 (should return and not leak)""
test_36a() {
rm -f $DIR/f36
utime $DIR/f36 || error
}
run_test 36a "MDS utime check (mknod, utime)""
test_36b() {
echo "" > $DIR/f36
utime $DIR/f36 || error
}
run_test 36b "OST utime check (open, utime)""
test_36c() {
rm -f $DIR/d36/f36
mkdir $DIR/d36
chown $RUNAS_ID $DIR/d36
$RUNAS utime $DIR/d36/f36 || error
}
run_test 36c "non-root MDS utime check (mknod, utime)""
test_36d() {
[ ! -d $DIR/d36 ] && test_36c
echo "" > $DIR/d36/f36
$RUNAS utime $DIR/d36/f36 || error
}
run_test 36d "non-root OST utime check (open, utime)""
test_36e() {
[ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" && return
mkdir -p $DIR/$tdir
touch $DIR/$tdir/$tfile
$RUNAS utime $DIR/$tdir/$tfile && \
error "utime worked, expected failure" || true
}
run_test 36e "utime on non-owned file (should return error)""
test_37() {
mkdir -p $DIR/$tdir
echo f > $DIR/$tdir/fbugfile
mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
ls $DIR/$tdir | grep "\<fbugfile\>" && error
$UMOUNT $DIR/$tdir || error
rm -f $DIR/$tdir/fbugfile || error
}
run_test 37 "ls a mounted file system to check old content""
test_38() {
local file=$DIR/$tfile
touch $file
openfile -f O_DIRECTORY $file
local RC=$?
local ENOTDIR=20
[ $RC -eq 0 ] && error "opened file $file with O_DIRECTORY" || true
[ $RC -eq $ENOTDIR ] || error "error $RC should be ENOTDIR ($ENOTDIR)"
}
run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR""
test_39() {
touch $DIR/$tfile
touch $DIR/${tfile}2
# ls -l $DIR/$tfile $DIR/${tfile}2
# ls -lu $DIR/$tfile $DIR/${tfile}2
# ls -lc $DIR/$tfile $DIR/${tfile}2
sleep 2
$OPENFILE -f O_CREAT:O_TRUNC:O_WRONLY $DIR/${tfile}2
if [ ! $DIR/${tfile}2 -nt $DIR/$tfile ]; then
echo "mtime"
ls -l $DIR/$tfile $DIR/${tfile}2
echo "atime"
ls -lu $DIR/$tfile $DIR/${tfile}2
echo "ctime"
ls -lc $DIR/$tfile $DIR/${tfile}2
error "O_TRUNC didn't change timestamps"
fi
}
run_test 39 "mtime changed on create""
test_40() {
dd if=/dev/zero of=$DIR/f40 bs=4096 count=1
$RUNAS $OPENFILE -f O_WRONLY:O_TRUNC $DIR/f40 && error
$CHECKSTAT -t file -s 4096 $DIR/f40 || error
}
run_test 40 "failed open(O_TRUNC) doesn't truncate""
test_43() {
mkdir -p $DIR/$tdir
cp -p /bin/ls $DIR/$tdir/$tfile
multiop $DIR/$tdir/$tfile Ow_c &
pid=$!
# give multiop a chance to open
sleep 1
$DIR/$tdir/$tfile && error || true
kill -USR1 $pid
}
run_test 43 "execution of file opened for write should return -ETXTBSY"
test_43a() {
mkdir -p $DIR/d43
cp -p `which multiop` $DIR/d43/multiop || cp -p multiop $DIR/d43/multiop
MULTIOP_PROG=$DIR/d43/multiop multiop_bg_pause $TMP/test43.junk O_c || return 1
MULTIOP_PID=$!
multiop $DIR/d43/multiop Oc && error "expected error, got success"
kill -USR1 $MULTIOP_PID || return 2
wait $MULTIOP_PID || return 3
rm $TMP/test43.junk
}
run_test 43a "open(RDWR) of file being executed should return -ETXTBSY"
test_43b() {
mkdir -p $DIR/d43
cp -p `which multiop` $DIR/d43/multiop || cp -p multiop $DIR/d43/multiop
MULTIOP_PROG=$DIR/d43/multiop multiop_bg_pause $TMP/test43.junk O_c || return 1
MULTIOP_PID=$!
truncate $DIR/d43/multiop 0 && error "expected error, got success"
kill -USR1 $MULTIOP_PID || return 2
wait $MULTIOP_PID || return 3
rm $TMP/test43.junk
}
run_test 43b "truncate of file being executed should return -ETXTBSY"
page_size() {
getconf PAGE_SIZE
}
test_48a() { # bug 2399
mkdir -p $DIR/d48a
cd $DIR/d48a
mv $DIR/d48a $DIR/d48.new || error "move directory failed"
mkdir $DIR/d48a || error "recreate directory failed"
touch foo || error "'touch foo' failed after recreating cwd"
mkdir bar || error "'mkdir foo' failed after recreating cwd"
touch .foo || error "'touch .foo' failed after recreating cwd"
mkdir .bar || error "'mkdir .foo' failed after recreating cwd"
ls . > /dev/null || error "'ls .' failed after recreating cwd"
ls .. > /dev/null || error "'ls ..' failed after removing cwd"
cd . || error "'cd .' failed after recreating cwd"
mkdir . && error "'mkdir .' worked after recreating cwd"
rmdir . && error "'rmdir .' worked after recreating cwd"
ln -s . baz || error "'ln -s .' failed after recreating cwd"
cd .. || error "'cd ..' failed after recreating cwd"
}
run_test 48a "Access renamed working dir (should return errors)="
test_48b() { # bug 2399
mkdir -p $DIR/d48b
cd $DIR/d48b
rmdir $DIR/d48b || error "remove cwd $DIR/d48b failed"
touch foo && error "'touch foo' worked after removing cwd"
mkdir foo && error "'mkdir foo' worked after removing cwd"
touch .foo && error "'touch .foo' worked after removing cwd"
mkdir .foo && error "'mkdir .foo' worked after removing cwd"
ls . > /dev/null && error "'ls .' worked after removing cwd"
ls .. > /dev/null || error "'ls ..' failed after removing cwd"
mkdir . && error "'mkdir .' worked after removing cwd"
rmdir . && error "'rmdir .' worked after removing cwd"
ln -s . foo && error "'ln -s .' worked after removing cwd"
cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3517
}
run_test 48b "Access removed working dir (should return errors)="
test_48c() { # bug 2350
mkdir -p $DIR/d48c/dir
cd $DIR/d48c/dir
rmdir $DIR/d48c/dir || error "remove cwd $DIR/d48c/dir failed"
touch foo && error "'touch foo' worked after removing cwd"
mkdir foo && error "'mkdir foo' worked after removing cwd"
touch .foo && error "'touch .foo' worked after removing cwd"
mkdir .foo && error "'mkdir .foo' worked after removing cwd"
ls . && error "'ls .' worked after removing cwd"
ls .. || error "'ls ..' failed after removing cwd"
mkdir . && error "'mkdir .' worked after removing cwd"
rmdir . && error "'rmdir .' worked after removing cwd"
ln -s . foo && error "'ln -s .' worked after removing cwd"
cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3415
}
run_test 48c "Access removed working subdir (should return errors)"
test_48d() { # bug 2350
mkdir -p $DIR/d48d/dir
cd $DIR/d48d/dir
rmdir $DIR/d48d/dir || error "remove cwd $DIR/d48d/dir failed"
rmdir $DIR/d48d || error "remove parent $DIR/d48d failed"
touch foo && error "'touch foo' worked after removing parent"
mkdir foo && error "'mkdir foo' worked after removing parent"
touch .foo && error "'touch .foo' worked after removing parent"
mkdir .foo && error "'mkdir .foo' worked after removing parent"
ls . && error "'ls .' worked after removing parent"
ls .. && error "'ls ..' worked after removing parent"
mkdir . && error "'mkdir .' worked after removing parent"
rmdir . && error "'rmdir .' worked after removing parent"
ln -s . foo && error "'ln -s .' worked after removing parent"
}
run_test 48d "Access removed parent subdir (should return errors)"
test_48e() { # bug 4134
mkdir -p $DIR/d48e/dir
cd $DIR/d48e/dir
rmdir $DIR/d48e/dir || error "remove cwd $DIR/d48e/dir failed"
rmdir $DIR/d48e || error "remove parent $DIR/d48e failed"
touch $DIR/d48e || error "'touch $DIR/d48e' failed"
chmod +x $DIR/d48e || error "'chmod +x $DIR/d48e' failed"
# On a buggy kernel addition of "touch foo" after cd .. will
# produce kernel oops in lookup_hash_it
touch ../foo && error "'cd ..' worked after recreate parent"
cd $DIR
rm $DIR/d48e || error "rm '$DIR/d48e' failed"
}
run_test 48e "Access to recreated parent subdir (should return errors)"
test_50() {
# bug 1485
mkdir $DIR/d50
cd $DIR/d50
ls /proc/$$/cwd || error
}
run_test 50 "special situations: /proc symlinks ""
test_51a() { # was test_51
# bug 1516 - create an empty entry right after ".." then split dir
mkdir $DIR/d51
touch $DIR/d51/foo
$MCREATE $DIR/d51/bar
rm $DIR/d51/foo
createmany -m $DIR/d51/longfile 201
FNUM=202
while [ `ls -sd $DIR/d51 | awk '{ print $1 }'` -eq 4 ]; do
$MCREATE $DIR/d51/longfile$FNUM
FNUM=$(($FNUM + 1))
echo -n "+"
done
echo
ls -l $DIR/d51 > /dev/null || error
}
run_test 51a "special situations: split htree with empty entry""
export NUMTEST=70000
test_51b() {
NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
[ $NUMFREE -lt 21000 ] && \
skip "not enough free inodes ($NUMFREE)" && \
return
check_kernel_version 40 || NUMTEST=31000
[ $NUMFREE -lt $NUMTEST ] && NUMTEST=$(($NUMFREE - 50))
mkdir -p $DIR/d51b
createmany -d $DIR/d51b/t- $NUMTEST
}
run_test 51b "mkdir .../t-0 --- .../t-$NUMTEST""
test_51c() {
[ ! -d $DIR/d51b ] && skip "$DIR/51b missing" && \
return
unlinkmany -d $DIR/d51b/t- $NUMTEST
}
run_test 51c "rmdir .../t-0 --- .../t-$NUMTEST""
test_52a() {
[ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
mkdir -p $DIR/d52a
touch $DIR/d52a/foo
chattr"a $DIR/d52a/foo || error "chattr =a failed"
echo bar >> $DIR/d52a/foo || error "append bar failed"
cp /etc/hosts $DIR/d52a/foo && error "cp worked"
rm -f $DIR/d52a/foo 2>/dev/null && error "rm worked"
link $DIR/d52a/foo $DIR/d52a/foo_link 2>/dev/null && error "link worked"
echo foo >> $DIR/d52a/foo || error "append foo failed"
mrename $DIR/d52a/foo $DIR/d52a/foo_ren && error "rename worked"
lsattr $DIR/d52a/foo | egrep -q "^-+a-+ $DIR/d52a/foo" || error "lsattr"
chattr -a $DIR/d52a/foo || error "chattr -a failed"
rm -fr $DIR/d52a || error "cleanup rm failed"
}
run_test 52a "append-only flag test (should return errors)""
test_52b() {
[ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
mkdir -p $DIR/d52b
touch $DIR/d52b/foo
chattr"i $DIR/d52b/foo || error
cat test > $DIR/d52b/foo && error
cp /etc/hosts $DIR/d52b/foo && error
rm -f $DIR/d52b/foo 2>/dev/null && error
link $DIR/d52b/foo $DIR/d52b/foo_link 2>/dev/null && error
echo foo >> $DIR/d52b/foo && error
mrename $DIR/d52b/foo $DIR/d52b/foo_ren && error
[ -f $DIR/d52b/foo ] || error
[ -f $DIR/d52b/foo_ren ] && error
lsattr $DIR/d52b/foo | egrep -q "^-+i-+ $DIR/d52b/foo" || error
chattr -i $DIR/d52b/foo || error
rm -fr $DIR/d52b || error
}
run_test 52b "immutable flag test (should return errors)""
test_54b() {
f="$DIR/f54b"
mknod $f c 1 3
chmod 0666 $f
dd if=/dev/zero of=$f bs=`page_size` count=1
}
run_test 54b "char device works in lustre""
find_loop_dev() {
[ -b /dev/loop/0 ] && LOOPBASE=/dev/loop/
[ -b /dev/loop0 ] && LOOPBASE=/dev/loop
[ -z "$LOOPBASE" ] && echo "/dev/loop/0 and /dev/loop0 gone?" && return
for i in `seq 3 7`; do
losetup $LOOPBASE$i > /dev/null 2>&1 && continue
LOOPDEV=$LOOPBASE$i
LOOPNUM=$i
break
done
}
test_54c() {
tfile="$DIR/f54c"
tdir="$DIR/d54c"
loopdev="$DIR/loop54c"
find_loop_dev
[ -z "$LOOPNUM" ] && echo "couldn't find empty loop device" && return
mknod $loopdev b 7 $LOOPNUM
echo "make a loop file system with $tfile on $loopdev ($LOOPNUM)..."
dd if=/dev/zero of=$tfile bs=`page_size` seek=1024 count=1 > /dev/null
losetup $loopdev $tfile || error "can't set up $loopdev for $tfile"
mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
mkdir -p $tdir
mount -t ext2 $loopdev $tdir || error "error mounting $loopdev on $tdir"
dd if=/dev/zero of=$tdir/tmp bs=`page_size` count=30 || error "dd write"
df $tdir
dd if=$tdir/tmp of=/dev/zero bs=`page_size` count=30 || error "dd read"
$UMOUNT $tdir
losetup -d $loopdev
rm $loopdev
}
run_test 54c "block device works in lustre""
test_54d() {
f="$DIR/f54d"
string="aaaaaa"
mknod $f p
[ "$string"" `echo $string > $f | cat $f` ] || error
}
run_test 54d "fifo device works in lustre""
test_54e() {
check_kernel_version 46 || return 0
f="$DIR/f54e"
string="aaaaaa"
cp -aL /dev/console $f
echo $string > $f || error
}
run_test 54e "console/tty device works in lustre""
test_61() {
f="$DIR/f61"
dd if=/dev/zero of=$f bs=`page_size` count=1
multiop $f OSMWUc || error
sync
}
run_test 61 "mmap() writes don't make sync hang""
# bug 2543 - update blocks count on client
test_66() {
COUNT=${COUNT:-8}
dd if=/dev/zero of=$DIR/f66 bs=1k count=$COUNT
sync; sleep 1; sync
BLOCKS=`ls -s $DIR/f66 | awk '{ print $1 }'`
[ $BLOCKS -ge $COUNT ] || error "$DIR/f66 blocks $BLOCKS < $COUNT"
}
run_test 66 "update inode blocks count on client""
LLOOP=
cleanup_68() {
trap 0
if [ ! -z "$LLOOP" ]; then
if swapon -s | grep -q $LLOOP; then
swapoff $LLOOP || error "swapoff failed"
fi
losetup -d $LOOPDEV || error "detach failed"
unset LOOPDEV
unset LLOOP
fi
rm -f $DIR/f68*
}
meminfo() {
awk '($1" "'$1':") { print $2 }' /proc/meminfo
}
swap_used() {
swapon -s | awk '($1" "'$1'") { print $4 }'
}
# excercise swapping to lustre by adding a high priority swapfile entry
# and then consuming memory until it is used.
test_68b() { # was test_68
[ "$UID" != 0 ] && skip "must run as root" && return
MEMTOTAL=`meminfo MemTotal`
NR_BLOCKS=$((MEMTOTAL>>8))
[[ $NR_BLOCKS -le 2048 ]] && NR_BLOCKS=2048
dd if=/dev/zero of=$DIR/f68b bs=64k seek=$NR_BLOCKS count=1
mkswap $DIR/f68b
trap cleanup_68 EXIT
swapon -p 32767 $LLOOP || error "swapon $LLOOP failed"
echo "before: `swapon -s | grep $LLOOP`"
$MEMHOG $MEMTOTAL || error "error allocating $MEMTOTAL kB"
echo "after: `swapon -s | grep $LLOOP`"
SWAPUSED=`swap_used $LLOOP`
cleanup_68
[ $SWAPUSED -eq 0 ] && echo "no swap used???" || true
}
run_test 68b "support swapping to Lustre""
test_72() { # bug 5695 - Test that on 2.6 remove_suid works properly
[ "$RUNAS_ID"" "$UID" ] && skip "RUNAS_ID = UID = $UID -- skipping" && return
# Check that testing environment is properly set up. Skip if not
FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS_ID $RUNAS || {
skip "User $RUNAS_ID does not exist - skipping"
return 0
}
touch $DIR/f72
chmod 777 $DIR/f72
chmod ug+s $DIR/f72
$RUNAS dd if=/dev/zero of=$DIR/f72 bs=512 count=1 || error
# See if we are still setuid/sgid
test -u $DIR/f72 -o -g $DIR/f72 && error "S/gid is not dropped on write"
}
run_test 72 "Test that remove suid works properly (bug5695)""
test_78() { # bug 10901
NSEQ=5
F78SIZE=$(($(awk '/MemFree:/ { print $2 }' /proc/meminfo) / 1024))
echo "MemFree: $F78SIZE, Max file size: $MAXFREE"
MEMTOTAL=$(($(awk '/MemTotal:/ { print $2 }' /proc/meminfo) / 1024))
echo "MemTotal: $MEMTOTAL"
# reserve 256MB of memory for the kernel and other running processes,
# and then take 1/2 of the remaining memory for the read/write buffers.
if [ $MEMTOTAL -gt 512 ] ;then
MEMTOTAL=$(((MEMTOTAL - 256 ) / 2))
else
# for those poor memory-starved high-end clusters...
MEMTOTAL=$((MEMTOTAL / 2))
fi
echo "Mem to use for directio: $MEMTOTAL"
[ $F78SIZE -gt $MEMTOTAL ] && F78SIZE=$MEMTOTAL
[ $F78SIZE -gt 512 ] && F78SIZE=512
[ $F78SIZE -gt $((MAXFREE / 1024)) ] && F78SIZE=$((MAXFREE / 1024))
SMALLEST=`df $DIR | awk '{print $4}' | tail -1`
[ $SMALLEST -lt 10240 ] && \
skip "too small OSTSIZE, useless to run large O_DIRECT test" && return 0
[ $F78SIZE -gt $((SMALLEST * $OSTCOUNT / 1024 - 80)) ] && \
F78SIZE=$((SMALLEST * $OSTCOUNT / 1024 - 80))
[ "$SLOW"" "no" ] && NSEQ=1 && [ $F78SIZE -gt 32 ] && F78SIZE=32
echo "File size: $F78SIZE"
$SETSTRIPE $DIR/$tfile -c $OSTCOUNT || error "setstripe failed"
for i in `seq 1 $NSEQ`
do
FSIZE=$(($F78SIZE / ($NSEQ - $i + 1)))
echo directIO rdwr round $i of $NSEQ
$DIRECTIO rdwr $DIR/$tfile 0 $FSIZE 1048576||error "rdwr failed"
done
rm -f $DIR/$tfile
}
run_test 78 "handle large O_DIRECT writes correctly""
test_80() { # bug 10718
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
sync; sleep 1; sync
local BEFORE=`date +%s`
cancel_lru_locks osc
local AFTER=`date +%s`
local DIFF=$((AFTER-BEFORE))
if [ $DIFF -gt 1 ] ; then
error "elapsed for 1M@1T" $DIFF"
fi
true
rm -f $DIR/$tfile
}
run_test 80 "Page eviction is equally fast at high offsets too ""
test_99a() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && \
return
mkdir -p $DIR/d99cvsroot
chown $RUNAS_ID $DIR/d99cvsroot
local oldPWD=$PWD # bug 13584, use $TMP as working dir
cd $TMP
$RUNAS cvs -d $DIR/d99cvsroot init || error
cd $oldPWD
}
run_test 99a "cvs init""
test_99b() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99a
cd /etc/init.d
# some versions of cvs import exit(1) when asked to import links or
# files they can't read. ignore those files.
TOIGNORE=$(find . -type l -printf '-I %f\n' -o \
! -perm +4 -printf '-I %f\n')
$RUNAS cvs -d $DIR/d99cvsroot import -m "nomesg" $TOIGNORE \
d99reposname vtag rtag
}
run_test 99b "cvs import""
test_99c() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99b
cd $DIR
mkdir -p $DIR/d99reposname
chown $RUNAS_ID $DIR/d99reposname
$RUNAS cvs -d $DIR/d99cvsroot co d99reposname
}
run_test 99c "cvs checkout""
test_99d() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS touch foo99
$RUNAS cvs add -m 'addmsg' foo99
}
run_test 99d "cvs add""
test_99e() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99c
cd $DIR/d99reposname
$RUNAS cvs update
}
run_test 99e "cvs update""
test_99f() {
[ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && return
[ ! -d $DIR/d99cvsroot ] && test_99d
cd $DIR/d99reposname
$RUNAS cvs commit -m 'nomsg' foo99
rm -fr $DIR/d99cvsroot
}
run_test 99f "cvs commit""
function get_named_value()
{
local tag
tag=$1
while read ;do
line=$REPLY
case $line in
$tag*)
echo $line | sed "s/^$tag//"
break
;;
esac
done
}
export SETUP_TEST102=no
setup_test102() {
[ "$SETUP_TEST102"" "yes" ] && return
mkdir -p $DIR/$tdir
chown $RUNAS_ID $DIR/$tdir
STRIPE_SIZE=65536
STRIPE_OFFSET=1
STRIPE_COUNT=$OSTCOUNT
[ $OSTCOUNT -gt 4 ] && STRIPE_COUNT=4
trap cleanup_test102 EXIT
cd $DIR
$1 $SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c $STRIPE_COUNT
cd $DIR/$tdir
for num in 1 2 3 4
do
for count in `seq 1 $STRIPE_COUNT`
do
for offset in `seq 0 $[$STRIPE_COUNT - 1]`
do
local stripe_size=`expr $STRIPE_SIZE \* $num`
local file=file"$num-$offset-$count"
$1 $SETSTRIPE $file -s $stripe_size -i $offset -c $count
done
done
done
cd $DIR
$1 $TAR cf $TMP/f102.tar $tdir --xattrs
SETUP_TEST102=yes
}
cleanup_test102() {
trap 0
[ "$SETUP_TEST102"" "yes" ] || return 0
rm -f $TMP/f102.tar
SETUP_TEST102=no
}
test_102a() {
local testfile=$DIR/xattr_testfile
rm -f $testfile
touch $testfile
[ "$UID" != 0 ] && skip "must run as root" && return
[ -z "`lctl get_param -n mdc.*-mdc-*.connect_flags | grep xattr`" ] && skip "must have user_xattr" && return
[ -z "$(which setfattr 2>/dev/null)" ] && skip "could not find setfattr" && return
echo "set/get xattr..."
setfattr -n trusted.name1 -v value1 $testfile || error
[ "`getfattr -n trusted.name1 $testfile 2> /dev/null | \
grep "trusted.name1"`"" "trusted.name1=\"value1\"" ] || error
setfattr -n user.author1 -v author1 $testfile || error
[ "`getfattr -n user.author1 $testfile 2> /dev/null | \
grep "user.author1"`"" "user.author1=\"author1\"" ] || error
echo "listxattr..."
setfattr -n trusted.name2 -v value2 $testfile || error
setfattr -n trusted.name3 -v value3 $testfile || error
[ `getfattr -d -m "^trusted" $testfile 2> /dev/null | \
grep "trusted.name" | wc -l` -eq 3 ] || error
setfattr -n user.author2 -v author2 $testfile || error
setfattr -n user.author3 -v author3 $testfile || error
[ `getfattr -d -m "^user" $testfile 2> /dev/null | \
grep "user" | wc -l` -eq 3 ] || error
echo "remove xattr..."
setfattr -x trusted.name1 $testfile || error
getfattr -d -m trusted $testfile 2> /dev/null | \
grep "trusted.name1" && error || true
setfattr -x user.author1 $testfile || error
getfattr -d -m user $testfile 2> /dev/null | \
grep "user.author1" && error || true
# b10667: setting lustre special xattr be silently discarded
echo "set lustre special xattr ..."
setfattr -n "trusted.lov" -v "invalid value" $testfile || error
rm -f $testfile
}
run_test 102a "user xattr test""
test_106() { #bug 10921
mkdir -p $DIR/$tdir
$DIR/$tdir && error "exec $DIR/$tdir succeeded"
chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
}
run_test 106 "attempt exec of dir followed by chown of that dir"
test_107() {
CDIR=`pwd`
cd $DIR
local file=core
rm -f $file
local save_pattern=$(sysctl -n kernel.core_pattern)
local save_uses_pid=$(sysctl -n kernel.core_uses_pid)
sysctl -w kernel.core_pattern=$file
sysctl -w kernel.core_uses_pid=0
ulimit -c unlimited
sleep 60 &
SLEEPPID=$!
sleep 1
kill -s 11 $SLEEPPID
wait $SLEEPPID
if [ -e $file ]; then
size=`stat -c%s $file`
[ $size -eq 0 ] && error "Fail to create core file $file"
else
error "Fail to create core file $file"
fi
rm -f $file
sysctl -w kernel.core_pattern=$save_pattern
sysctl -w kernel.core_uses_pid=$save_uses_pid
cd $CDIR
}
run_test 107 "Coredump on SIG"
test_110() {
mkdir -p $DIR/d110
mkdir $DIR/d110/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa || error "mkdir with 255 char fail"
mkdir $DIR/d110/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb && error "mkdir with 256 char should fail, but not"
touch $DIR/d110/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx || error "create with 255 char fail"
touch $DIR/d110/yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy && error ""create with 256 char should fail, but not
ls -l $DIR/d110
rm -fr $DIR/d110
}
run_test 110 "filename length checking"
test_119a() # bug 11737
{
BSIZE=$((512 * 1024))
directio write $DIR/$tfile 0 1 $BSIZE
# We ask to read two blocks, which is more than a file size.
# directio will indicate an error when requested and actual
# sizes aren't equal (a normal situation in this case) and
# print actual read amount.
NOB=`directio read $DIR/$tfile 0 2 $BSIZE | awk '/error/ {print $6}'`
if [ "$NOB" != "$BSIZE" ]; then
error "read $NOB bytes instead of $BSIZE"
fi
rm -f $DIR/$tfile
}
run_test 119a "Short directIO read must return actual read amount"
test_119b() # bug 11737
{
dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1 || error "dd failed"
sync
multiop $DIR/$tfile oO_RDONLY:O_DIRECT:r$((2048 * 1024)) || \
error "direct read failed"
rm -f $DIR/$tfile
}
run_test 119b "Sparse directIO read must return actual read amount"
test_119c() # bug 13099
{
BSIZE=1048576
directio write $DIR/$tfile 3 1 $BSIZE || error "direct write failed"
directio readhole $DIR/$tfile 0 2 $BSIZE || error "reading hole failed"
rm -f $DIR/$tfile
}
run_test 119c "Testing for direct read hitting hole"
test_126() { # bug 12829/13455
[ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" && return
$RUNAS -u 0 -g 1 touch $DIR/$tfile || error "touch failed"
gid=`ls -n $DIR/$tfile | awk '{print $4}'`
rm -f $DIR/$tfile
[ $gid -eq "1" ] || error "gid is set to" $gid "instead of 1"
}
run_test 126 "check that the fsgid provided by the client is taken into account"
OLDIFS="$IFS"
cleanup_130() {
trap 0
IFS="$OLDIFS"
}
test_130a() {
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
dd if=/dev/zero of=$fm_file bs=65536 count=1 || error "dd failed for $fm_file"
filefrag -ves $fm_file || error "filefrag $fm_file failed"
filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v "ext:" | grep -v "found"`
start_blk=`echo $filefrag_op | cut -d: -f2 | cut -d. -f1`
IFS=$'\n'
tot_len=0
for line in $filefrag_op; do
ext_len=`echo $line | cut -d: -f4`
(( tot_len += ext_len ))
done
if (( start_blk != 0 || tot_len != 64 )); then
cleanup_130
error "FIEMAP on 1-stripe file($fm_file) failed;"
return
fi
cleanup_130
echo "FIEMAP on single striped file succeeded"
}
run_test 130a "FIEMAP (1-stripe file)"
test_130e() {
skip "this test needs cleanup for non-lustre"
filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
[ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" && return
trap cleanup_130 EXIT RETURN
local fm_file=$DIR/$tfile
NUM_BLKS=512
EXPECTED_LEN=$(( (NUM_BLKS / 2) * 4 ))
for ((i" 0; i < $NUM_BLKS; i++))
do
dd if=/dev/zero of=$fm_file count=1 bs=4096 seek=$((2*$i)) conv=notrunc > /dev/null 2>&1
done
filefrag -ves $fm_file || error "filefrag $fm_file failed"
filefrag_op=`filefrag -ve $fm_file | grep -A 750 "ext:" | grep -v "ext:" | grep -v "found"`
IFS=$'\n'
tot_len=0
for line in $filefrag_op; do
ext_len=`echo $line | cut -d: -f4`
(( tot_len += ext_len ))
done
if (( tot_len != $EXPECTED_LEN )); then
cleanup_130
error "FIEMAP on $fm_file failed; len $tot_len != $EXPECTED_LEN"
return
fi
cleanup_130
echo "FIEMAP with continuation calls succeeded"
}
run_test 130e "FIEMAP (test continuation FIEMAP calls)"
# Test for writev/readv
test_131a() {
rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 || \
error "writev test failed"
rwv -f $DIR/$tfile -r -v -n 2 1572864 1048576 || \
error "readv failed"
rm -f $DIR/$tfile
}
run_test 131a "test iov's crossing stripe boundary for writev/readv"
test_131b() {
rwv -f $DIR/$tfile -w -a -n 3 524288 1048576 1572864 || \
error "append writev test failed"
rwv -f $DIR/$tfile -w -a -n 2 1572864 1048576 || \
error "append writev test failed"
rm -f $DIR/$tfile
}
run_test 131b "test append writev"
test_131c() {
rwv -f $DIR/$tfile -w -d -n 1 1048576 || return 0
error "NOT PASS"
}
run_test 131c "test read/write on file w/o objects"
test_131d() {
rwv -f $DIR/$tfile -w -n 1 1572864
NOB=`rwv -f $DIR/$tfile -r -n 3 524288 524288 1048576 | awk '/error/ {print $6}'`
if [ "$NOB" != 1572864 ]; then
error "Short read filed: read $NOB bytes instead of 1572864"
fi
rm -f $DIR/$tfile
}
run_test 131d "test short read"
test_131e() {
rwv -f $DIR/$tfile -w -s 1048576 -n 1 1048576
rwv -f $DIR/$tfile -r -z -s 0 -n 1 524288 || \
error "read hitting hole failed"
rm -f $DIR/$tfile
}
run_test 131e "test read hitting hole"
test_140() { #bug-17379
mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
cd $DIR/$tdir || error "Changing to $DIR/$tdir"
cp /usr/bin/stat . || error "Copying stat to $DIR/$tdir"
# VFS limits max symlink depth to 8
local i=0
while i=`expr $i + 1`; do
mkdir -p $i || error "Creating dir $i"
cd $i || error "Changing to $i"
ln -s ../stat stat || error "Creating stat symlink"
# Read the symlink until ELOOP present,
# not LBUGing the system is considered success,
# we didn't overrun the stack.
$OPENFILE -f O_RDONLY stat >/dev/null 2>&1; ret=$?
[ $ret -ne 0 ] && {
if [ $ret -eq 40 ]; then
break # -ELOOP
else
error "Open stat symlink"
return
fi
}
done
i=`expr $i - 1`
echo "The symlink depth" $i"
[ $i -eq 8 ] || error "Invalid symlink depth"
}
run_test 140 "Check reasonable stack depth (shouldn't LBUG)""
test_154() {
# do directio so as not to populate the page cache
log "creating a 10 Mb file"
multiop $DIR/$tfile oO_CREAT:O_DIRECT:O_RDWR:w$((10*1048576))c || error "multiop failed while creating a file"
log "starting reads"
dd if=$DIR/$tfile of=/dev/null bs=4096 &
log "truncating the file"
multiop $DIR/$tfile oO_TRUNC:c || error "multiop failed while truncating the file"
log "killing dd"
kill %+ || true # reads might have finished
echo "wait until dd is finished"
wait
log "removing the temporary file"
rm -rf $DIR/$tfile || error "tmp file removal failed"
}
run_test 154 "parallel read and truncate should not deadlock""
echo "$0: completed"
Hi Andreas,
On Sat, May 23, 2009 at 3:06 AM, Andreas Dilger <[email protected]> wrote:
> Below are included some of the tests from the Lustre "sanity.sh" script,
> which tests filesystem behaviour in a variety of ways. Some of them are
> very simple and might concievably be removed, but are not necessarily bad.
> I've removed the tests that depend on Lustre-specific behaviour.
>
> It probably isn't useful to use this test script directly, since it
> depends on a number of helper functions, but it is definitely useful
> as a starting point for adding new tests to xfstests.
>
> Unfortunately, a bunch of tests had to be removed since they depend on
> Lustre's fault-injection code, but they would be useful for testing
> generic filesystem behaviour (e.g. ENOMEM or ENOSPC handling). There
> is also a helper program we use "multiop" which is a toolbox program
> that I could supply separately, if you want.
How about understanding these and find out if they can be made part of LTP
as well ? Any objection(s) ?
Regards--
Subrata
>
>
> Cheers, Andreas
> --
> Andreas Dilger
> Sr. Staff Engineer, Lustre Group
> Sun Microsystems of Canada, Inc.
>
>
> ============================================================================
>
> TMP=${TMP:-/tmp}
>
> [ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
> [ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
> rm -rf $DIR/[Rdfs][0-9]*
>
> # $RUNAS_ID may get set incorrectly somewhere else
> [ $UID -eq 0 -a $RUNAS_ID -eq 0 ] && error "\$RUNAS_ID set to 0, but \$UID
> is also 0!"
>
>
> echo "preparing for tests involving mounts"
> EXT2_DEV=${EXT2_DEV:-$TMP/SANITY.LOOP}
> touch $EXT2_DEV
> mke2fs -j -F $EXT2_DEV 8000 > /dev/null
> echo # add a newline after mke2fs.
>
> umask 077
>
> test_0() {
> touch $DIR/$tfile
> $CHECKSTAT -t file $DIR/$tfile || error
> rm $DIR/$tfile
> $CHECKSTAT -a $DIR/$tfile || error
> }
> run_test 0 "touch .../$tfile ; rm .../$tfile"
>
> test_0b() {
> chmod 0755 $DIR || error
> $CHECKSTAT -p 0755 $DIR || error
> }
> run_test 0b "chmod 0755 $DIR"
>
> test_1a() {
> mkdir $DIR/d1
> mkdir $DIR/d1/d2
> mkdir $DIR/d1/d2 && error "we expect EEXIST, but not returned"
> $CHECKSTAT -t dir $DIR/d1/d2 || error
> }
> run_test 1a "mkdir .../d1; mkdir .../d1/d2"
>
> test_1b() {
> rmdir $DIR/d1/d2
> rmdir $DIR/d1
> $CHECKSTAT -a $DIR/d1 || error
> }
> run_test 1b "rmdir .../d1/d2; rmdir .../d1"
>
> test_2a() {
> mkdir $DIR/d2
> touch $DIR/d2/f
> $CHECKSTAT -t file $DIR/d2/f || error
> }
> run_test 2a "mkdir .../d2; touch .../d2/f"
>
> test_2b() {
> rm -r $DIR/d2
> $CHECKSTAT -a $DIR/d2 || error
> }
> run_test 2b "rm -r .../d2; checkstat .../d2/f"
>
> test_3a() {
> mkdir $DIR/d3
> $CHECKSTAT -t dir $DIR/d3 || error
> }
> run_test 3a "mkdir .../d3"
>
> test_3b() {
> if [ ! -d $DIR/d3 ]; then
> mkdir $DIR/d3
> fi
> touch $DIR/d3/f
> $CHECKSTAT -t file $DIR/d3/f || error
> }
> run_test 3b "touch .../d3/f"
>
> test_3c() {
> rm -r $DIR/d3
> $CHECKSTAT -a $DIR/d3 || error
> }
> run_test 3c "rm -r .../d3"
>
> test_4a() {
> mkdir $DIR/d4
> $CHECKSTAT -t dir $DIR/d4 || error
> }
> run_test 4a "mkdir .../d4"
>
> test_4b() {
> if [ ! -d $DIR/d4 ]; then
> mkdir $DIR/d4
> fi
> mkdir $DIR/d4/d2
> $CHECKSTAT -t dir $DIR/d4/d2 || error
> }
> run_test 4b "mkdir .../d4/d2"
>
> test_5() {
> mkdir $DIR/d5
> mkdir $DIR/d5/d2
> chmod 0707 $DIR/d5/d2
> $CHECKSTAT -t dir -p 0707 $DIR/d5/d2 || error
> }
> run_test 5 "mkdir .../d5 .../d5/d2; chmod .../d5/d2"
>
> test_6a() {
> touch $DIR/f6a
> chmod 0666 $DIR/f6a || error
> $CHECKSTAT -t file -p 0666 -u \#$UID $DIR/f6a || error
> }
> run_test 6a "touch .../f6a; chmod .../f6a"
>
> test_6b() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> if [ ! -f $DIR/f6a ]; then
> touch $DIR/f6a
> chmod 0666 $DIR/f6a
> fi
> $RUNAS chmod 0444 $DIR/f6a && error
> $CHECKSTAT -t file -p 0666 -u \#$UID $DIR/f6a || error
> }
> run_test 6b "$RUNAS chmod .../f6a (should return error)""
>
> test_6c() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> touch $DIR/f6c
> chown $RUNAS_ID $DIR/f6c || error
> $CHECKSTAT -t file -u \#$RUNAS_ID $DIR/f6c || error
> }
> run_test 6c "touch .../f6c; chown .../f6c"
>
> test_6d() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> if [ ! -f $DIR/f6c ]; then
> touch $DIR/f6c
> chown $RUNAS_ID $DIR/f6c
> fi
> $RUNAS chown $UID $DIR/f6c && error
> $CHECKSTAT -t file -u \#$RUNAS_ID $DIR/f6c || error
> }
> run_test 6d "$RUNAS chown .../f6c (should return error)""
>
> test_6e() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> touch $DIR/f6e
> chgrp $RUNAS_ID $DIR/f6e || error
> $CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/f6e || error
> }
> run_test 6e "touch .../f6e; chgrp .../f6e"
>
> test_6f() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> if [ ! -f $DIR/f6e ]; then
> touch $DIR/f6e
> chgrp $RUNAS_ID $DIR/f6e
> fi
> $RUNAS chgrp $UID $DIR/f6e && error
> $CHECKSTAT -t file -u \#$UID -g \#$RUNAS_ID $DIR/f6e || error
> }
> run_test 6f "$RUNAS chgrp .../f6e (should return error)""
>
> test_6g() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> mkdir $DIR/d6g || error
> chmod 777 $DIR/d6g || error
> $RUNAS mkdir $DIR/d6g/d || error
> chmod g+s $DIR/d6g/d || error
> mkdir $DIR/d6g/d/subdir
> $CHECKSTAT -g \#$RUNAS_ID $DIR/d6g/d/subdir || error
> }
> run_test 6g "Is new dir in sgid dir inheriting group?"
>
> test_6h() { # bug 7331
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> touch $DIR/f6h || error "touch failed"
> chown $RUNAS_ID:$RUNAS_ID $DIR/f6h || error "initial chown failed"
> $RUNAS -G$RUNAS_ID chown $RUNAS_ID:0 $DIR/f6h && error "chown
> worked"
> $CHECKSTAT -t file -u \#$RUNAS_ID -g \#$RUNAS_ID $DIR/f6h || error
> }
> run_test 6h "$RUNAS chown RUNAS_ID.0 .../f6h (should return error)"
>
> test_7a() {
> mkdir $DIR/d7
> $MCREATE $DIR/d7/f
> chmod 0666 $DIR/d7/f
> $CHECKSTAT -t file -p 0666 $DIR/d7/f || error
> }
> run_test 7a "mkdir .../d7; mcreate .../d7/f; chmod .../d7/f""
>
> test_7b() {
> if [ ! -d $DIR/d7 ]; then
> mkdir $DIR/d7
> fi
> $MCREATE $DIR/d7/f2
> echo -n foo > $DIR/d7/f2
> [ "`cat $DIR/d7/f2`"" "foo" ] || error
> $CHECKSTAT -t file -s 3 $DIR/d7/f2 || error
> }
> run_test 7b "mkdir .../d7; mcreate d7/f2; echo foo > d7/f2"
>
> test_8() {
> mkdir $DIR/d8
> touch $DIR/d8/f
> chmod 0666 $DIR/d8/f
> $CHECKSTAT -t file -p 0666 $DIR/d8/f || error
> }
> run_test 8 "mkdir .../d8; touch .../d8/f; chmod .../d8/f"
>
> test_9() {
> mkdir $DIR/d9
> mkdir $DIR/d9/d2
> mkdir $DIR/d9/d2/d3
> $CHECKSTAT -t dir $DIR/d9/d2/d3 || error
> }
> run_test 9 "mkdir .../d9 .../d9/d2 .../d9/d2/d3"
>
> test_10() {
> mkdir $DIR/d10
> mkdir $DIR/d10/d2
> touch $DIR/d10/d2/f
> $CHECKSTAT -t file $DIR/d10/d2/f || error
> }
> run_test 10 "mkdir .../d10 .../d10/d2; touch .../d10/d2/f"
>
> test_11() {
> mkdir $DIR/d11
> mkdir $DIR/d11/d2
> chmod 0666 $DIR/d11/d2
> chmod 0705 $DIR/d11/d2
> $CHECKSTAT -t dir -p 0705 $DIR/d11/d2 || error
> }
> run_test 11 "mkdir .../d11 d11/d2; chmod .../d11/d2"
>
> test_12() {
> mkdir $DIR/d12
> touch $DIR/d12/f
> chmod 0666 $DIR/d12/f
> chmod 0654 $DIR/d12/f
> $CHECKSTAT -t file -p 0654 $DIR/d12/f || error
> }
> run_test 12 "touch .../d12/f; chmod .../d12/f .../d12/f"
>
> test_13() {
> mkdir $DIR/d13
> dd if=/dev/zero of=$DIR/d13/f count=10
> > $DIR/d13/f
> $CHECKSTAT -t file -s 0 $DIR/d13/f || error
> }
> run_test 13 "creat .../d13/f; dd .../d13/f; > .../d13/f"
>
> test_14() {
> mkdir $DIR/d14
> touch $DIR/d14/f
> rm $DIR/d14/f
> $CHECKSTAT -a $DIR/d14/f || error
> }
> run_test 14 "touch .../d14/f; rm .../d14/f; rm .../d14/f"
>
> test_15() {
> mkdir $DIR/d15
> touch $DIR/d15/f
> mv $DIR/d15/f $DIR/d15/f2
> $CHECKSTAT -t file $DIR/d15/f2 || error
> }
> run_test 15 "touch .../d15/f; mv .../d15/f .../d15/f2"
>
> test_16() {
> mkdir $DIR/d16
> touch $DIR/d16/f
> rm -rf $DIR/d16/f
> $CHECKSTAT -a $DIR/d16/f || error
> }
> run_test 16 "touch .../d16/f; rm -rf .../d16/f"
>
> test_17a() {
> mkdir -p $DIR/d17
> touch $DIR/d17/f
> ln -s $DIR/d17/f $DIR/d17/l-exist
> ls -l $DIR/d17
> $CHECKSTAT -l $DIR/d17/f $DIR/d17/l-exist || error
> $CHECKSTAT -f -t f $DIR/d17/l-exist || error
> rm -f $DIR/d17/l-exist
> $CHECKSTAT -a $DIR/d17/l-exist || error
> }
> run_test 17a "symlinks: create, remove (real)"
>
> test_17b() {
> mkdir -p $DIR/d17
> ln -s no-such-file $DIR/d17/l-dangle
> ls -l $DIR/d17
> $CHECKSTAT -l no-such-file $DIR/d17/l-dangle || error
> $CHECKSTAT -fa $DIR/d17/l-dangle || error
> rm -f $DIR/d17/l-dangle
> $CHECKSTAT -a $DIR/d17/l-dangle || error
> }
> run_test 17b "symlinks: create, remove (dangling)"
>
> test_17c() { # bug 3440 - don't save failed open RPC for replay
> mkdir -p $DIR/d17
> ln -s foo $DIR/d17/f17c
> cat $DIR/d17/f17c && error "opened non-existent symlink" || true
> }
> run_test 17c "symlinks: open dangling (should return error)""
>
> test_17d() {
> mkdir -p $DIR/d17
> ln -s foo $DIR/d17/f17d
> touch $DIR/d17/f17d || error "creating to new symlink"
> }
> run_test 17d "symlinks: create dangling"
>
> test_17e() {
> mkdir -p $DIR/$tdir
> local foo=$DIR/$tdir/$tfile
> ln -s $foo $foo || error "create symlink failed"
> ls -l $foo || error "ls -l failed"
> ls $foo && error "ls not failed" || true
> }
> run_test 17e "symlinks: create recursive symlink (should return error)""
>
> test_17f() {
> mkdir -p $DIR/d17f
> ln -s 1234567890/2234567890/3234567890/4234567890 $DIR/d17f/111
> ln -s
> 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890
> $DIR/d17f/222
> ln -s
> 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890
> $DIR/d17f/333
> ln -s
> 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890
> $DIR/d17f/444
> ln -s
> 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890
> $DIR/d17f/555
> ln -s
> 1234567890/2234567890/3234567890/4234567890/5234567890/6234567890/7234567890/8234567890/9234567890/a234567890/b234567890/c234567890/d234567890/f234567890/aaaaaaaaaa/bbbbbbbbbb/cccccccccc/dddddddddd/eeeeeeeeee/ffffffffff/
> $DIR/d17f/666
> ls -l $DIR/d17f
> }
> run_test 17f "symlinks: long and very long symlink name"
>
> test_17g() {
> mkdir -p $DIR/$tdir
> LONGSYMLINK="$(dd if=/dev/zero bs=4095 count=1 | tr '\0' 'x')"
> ln -s $LONGSYMLINK $DIR/$tdir/$tfile
> ls -l $DIR/$tdir
> }
> run_test 17g "symlinks: really long symlink name"
>
> test_17h() { #bug 17378
> mkdir -p $DIR/$tdir
> $SETSTRIPE $DIR/$tdir -c -1
> #define OBD_FAIL_MDS_LOV_PREP_CREATE 0x141
> do_facet mds lctl set_param fail_loc=0x80000141
> touch $DIR/$tdir/$tfile || true
> }
> run_test 17h "create objects: lov_free_memmd() doesn't lbug"
>
> test_18() {
> touch $DIR/f
> ls $DIR || error
> }
> run_test 18 "touch .../f ; ls ..."
>
> test_19a() {
> touch $DIR/f19
> ls -l $DIR
> rm $DIR/f19
> $CHECKSTAT -a $DIR/f19 || error
> }
> run_test 19a "touch .../f19 ; ls -l ... ; rm .../f19"
>
> test_19b() {
> ls -l $DIR/f19 && error || true
> }
> run_test 19b "ls -l .../f19 (should return error)"
>
> test_19c() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> $RUNAS touch $DIR/f19 && error || true
> }
> run_test 19c "$RUNAS touch .../f19 (should return error)""
>
> test_19d() {
> cat $DIR/f19 && error || true
> }
> run_test 19d "cat .../f19 (should return error)"
>
> test_20() {
> touch $DIR/f
> rm $DIR/f
> log "1 done"
> touch $DIR/f
> rm $DIR/f
> log "2 done"
> touch $DIR/f
> rm $DIR/f
> log "3 done"
> $CHECKSTAT -a $DIR/f || error
> }
> run_test 20 "touch .../f ; ls -l ..."
>
> test_21() {
> mkdir $DIR/d21
> [ -f $DIR/d21/dangle ] && rm -f $DIR/d21/dangle
> ln -s dangle $DIR/d21/link
> echo foo >> $DIR/d21/link
> cat $DIR/d21/dangle
> $CHECKSTAT -t link $DIR/d21/link || error
> $CHECKSTAT -f -t file $DIR/d21/link || error
> }
> run_test 21 "write to dangling link"
>
> test_22() {
> WDIR=$DIR/$tdir
> mkdir -p $WDIR
> chown $RUNAS_ID $WDIR
> (cd $WDIR || error "cd $WDIR failed";
> $RUNAS tar cf - /etc/hosts /etc/sysconfig/network | \
> $RUNAS tar xf -)
> ls -lR $WDIR/etc || error "ls -lR $WDIR/etc failed"
> $CHECKSTAT -t dir $WDIR/etc || error "checkstat -t dir failed"
> $CHECKSTAT -u \#$RUNAS_ID $WDIR/etc || error "checkstat -u failed"
> }
> run_test 22 "unpack tar archive as non-root user"
>
> test_23() {
> mkdir -p $DIR/$tdir
> local file=$DIR/$tdir/$tfile
>
> openfile -f O_CREAT:O_EXCL $file || error "$file create failed"
> openfile -f O_CREAT:O_EXCL $file &&
> error "$file recreate succeeded" || true
> }
> run_test 23 "O_CREAT|O_EXCL in subdir"
>
> test_24a() {
> echo '== rename sanity"
> echo '-- same directory rename'
> mkdir $DIR/R1
> touch $DIR/R1/f
> mv $DIR/R1/f $DIR/R1/g
> $CHECKSTAT -t file $DIR/R1/g || error
> }
> run_test 24a "touch .../R1/f; rename .../R1/f .../R1/g"
>
> test_24b() {
> mkdir $DIR/R2
> touch $DIR/R2/{f,g}
> mv $DIR/R2/f $DIR/R2/g
> $CHECKSTAT -a $DIR/R2/f || error
> $CHECKSTAT -t file $DIR/R2/g || error
> }
> run_test 24b "touch .../R2/{f,g}; rename .../R2/f .../R2/g"
>
> test_24c() {
> mkdir $DIR/R3
> mkdir $DIR/R3/f
> mv $DIR/R3/f $DIR/R3/g
> $CHECKSTAT -a $DIR/R3/f || error
> $CHECKSTAT -t dir $DIR/R3/g || error
> }
> run_test 24c "mkdir .../R3/f; rename .../R3/f .../R3/g"
>
> test_24d() {
> mkdir $DIR/R4
> mkdir $DIR/R4/{f,g}
> mrename $DIR/R4/f $DIR/R4/g
> $CHECKSTAT -a $DIR/R4/f || error
> $CHECKSTAT -t dir $DIR/R4/g || error
> }
> run_test 24d "mkdir .../R4/{f,g}; rename .../R4/f .../R4/g"
>
> test_24e() {
> echo '-- cross directory renames --'
> mkdir $DIR/R5{a,b}
> touch $DIR/R5a/f
> mv $DIR/R5a/f $DIR/R5b/g
> $CHECKSTAT -a $DIR/R5a/f || error
> $CHECKSTAT -t file $DIR/R5b/g || error
> }
> run_test 24e "touch .../R5a/f; rename .../R5a/f .../R5b/g"
>
> test_24f() {
> mkdir $DIR/R6{a,b}
> touch $DIR/R6a/f $DIR/R6b/g
> mv $DIR/R6a/f $DIR/R6b/g
> $CHECKSTAT -a $DIR/R6a/f || error
> $CHECKSTAT -t file $DIR/R6b/g || error
> }
> run_test 24f "touch .../R6a/f R6b/g; mv .../R6a/f .../R6b/g""
>
> test_24g() {
> mkdir $DIR/R7{a,b}
> mkdir $DIR/R7a/d
> mv $DIR/R7a/d $DIR/R7b/e
> $CHECKSTAT -a $DIR/R7a/d || error
> $CHECKSTAT -t dir $DIR/R7b/e || error
> }
> run_test 24g "mkdir .../R7{a,b}/d; mv .../R7a/d .../R7b/e"
>
> test_24h() {
> mkdir $DIR/R8{a,b}
> mkdir $DIR/R8a/d $DIR/R8b/e
> mrename $DIR/R8a/d $DIR/R8b/e
> $CHECKSTAT -a $DIR/R8a/d || error
> $CHECKSTAT -t dir $DIR/R8b/e || error
> }
> run_test 24h "mkdir .../R8{a,b}/{d,e}; rename .../R8a/d .../R8b/e"
>
> test_24i() {
> echo "-- rename error cases"
> mkdir $DIR/R9
> mkdir $DIR/R9/a
> touch $DIR/R9/f
> mrename $DIR/R9/f $DIR/R9/a
> $CHECKSTAT -t file $DIR/R9/f || error
> $CHECKSTAT -t dir $DIR/R9/a || error
> $CHECKSTAT -a $DIR/R9/a/f || error
> }
> run_test 24i "rename file to dir error: touch f ; mkdir a ; rename f a"
>
> test_24j() {
> mkdir $DIR/R10
> mrename $DIR/R10/f $DIR/R10/g
> $CHECKSTAT -t dir $DIR/R10 || error
> $CHECKSTAT -a $DIR/R10/f || error
> $CHECKSTAT -a $DIR/R10/g || error
> }
> run_test 24j "source does not exist"
>
> test_24k() {
> mkdir $DIR/R11a $DIR/R11a/d
> touch $DIR/R11a/f
> mv $DIR/R11a/f $DIR/R11a/d
> $CHECKSTAT -a $DIR/R11a/f || error
> $CHECKSTAT -t file $DIR/R11a/d/f || error
> }
> run_test 24k "touch .../R11a/f; mv .../R11a/f .../R11a/d"
>
> # bug 2429 - rename foo foo foo creates invalid file
> test_24l() {
> f="$DIR/f24l"
> multiop $f OcNs || error
> }
> run_test 24l "Renaming a file to itself"
>
> test_24m() {
> f="$DIR/f24m"
> multiop $f OcLN ${f}2 ${f}2 || error "link ${f}2 ${f}2 failed"
> # on ext3 this does not remove either the source or target files
> # though the "expected" operation would be to remove the source
> $CHECKSTAT -t file ${f} || error "${f} missing"
> $CHECKSTAT -t file ${f}2 || error "${f}2 missing"
> }
> run_test 24m "Renaming a file to a hard link to itself"
>
> test_24n() {
> f="$DIR/f24n"
> # this stats the old file after it was renamed, so it should fail
> touch ${f}
> $CHECKSTAT ${f}
> mv ${f} ${f}.rename
> $CHECKSTAT ${f}.rename
> $CHECKSTAT -a ${f}
> }
> run_test 24n "Statting the old file after renaming (Posix rename 2)"
>
> test_24o() {
> check_kernel_version 37 || return 0
> mkdir -p $DIR/d24o
> rename_many -s random -v -n 10 $DIR/d24o
> }
> run_test 24o "rename of files during htree split"
>
> test_24p() {
> mkdir $DIR/R12{a,b}
> DIRINO=`ls -lid $DIR/R12a | awk '{ print $1 }'`
> mrename $DIR/R12a $DIR/R12b
> $CHECKSTAT -a $DIR/R12a || error
> $CHECKSTAT -t dir $DIR/R12b || error
> DIRINO2=`ls -lid $DIR/R12b | awk '{ print $1 }'`
> [ "$DIRINO"" "$DIRINO2" ] || error "R12a $DIRINO != R12b $DIRINO2"
> }
> run_test 24p "mkdir .../R12{a,b}; rename .../R12a .../R12b"
>
> test_24q() {
> mkdir $DIR/R13{a,b}
> DIRINO=`ls -lid $DIR/R13a | awk '{ print $1 }'`
> multiop_bg_pause $DIR/R13b D_c || return 1
> MULTIPID=$!
>
> mrename $DIR/R13a $DIR/R13b
> $CHECKSTAT -a $DIR/R13a || error
> $CHECKSTAT -t dir $DIR/R13b || error
> DIRINO2=`ls -lid $DIR/R13b | awk '{ print $1 }'`
> [ "$DIRINO"" "$DIRINO2" ] || error "R13a $DIRINO != R13b $DIRINO2"
> kill -USR1 $MULTIPID
> wait $MULTIPID || error "multiop close failed"
> }
> run_test 24q "mkdir .../R13{a,b}; open R13b rename R13a R13b""
>
> test_24r() { #bug 3789
> mkdir $DIR/R14a $DIR/R14a/b
> mrename $DIR/R14a $DIR/R14a/b && error "rename to subdir worked!"
> $CHECKSTAT -t dir $DIR/R14a || error "$DIR/R14a missing"
> $CHECKSTAT -t dir $DIR/R14a/b || error "$DIR/R14a/b missing"
> }
> run_test 24r "mkdir .../R14a/b; rename .../R14a .../R14a/b"
>
> test_24s() {
> mkdir $DIR/R15a $DIR/R15a/b $DIR/R15a/b/c
> mrename $DIR/R15a $DIR/R15a/b/c && error "rename to sub-subdir
> worked!"
> $CHECKSTAT -t dir $DIR/R15a || error "$DIR/R15a missing"
> $CHECKSTAT -t dir $DIR/R15a/b/c || error "$DIR/R15a/b/c missing"
> }
> run_test 24s "mkdir .../R15a/b/c; rename .../R15a .../R15a/b/c""
> test_24t() {
> mkdir $DIR/R16a $DIR/R16a/b $DIR/R16a/b/c
> mrename $DIR/R16a/b/c $DIR/R16a && error "rename to sub-subdir
> worked!"
> $CHECKSTAT -t dir $DIR/R16a || error "$DIR/R16a missing"
> $CHECKSTAT -t dir $DIR/R16a/b/c || error "$DIR/R16a/b/c missing"
> }
> run_test 24t "mkdir .../R16a/b/c; rename .../R16a/b/c .../R16a""
>
> test_24u() { # bug12192
> multiop $DIR/$tfile C2w$((2048 * 1024))c || error
> $CHECKSTAT -s $((2048 * 1024)) $DIR/$tfile || error "wrong file
> size"
> }
> run_test 24u "create stripe file"
>
> test_25a() {
> echo '== symlink sanity"
>
> mkdir $DIR/d25
> ln -s d25 $DIR/s25
> touch $DIR/s25/foo || error
> }
> run_test 25a "create file in symlinked directory"
>
> test_25b() {
> [ ! -d $DIR/d25 ] && test_25a
> $CHECKSTAT -t file $DIR/s25/foo || error
> }
> run_test 25b "lookup file in symlinked directory""
>
> test_26a() {
> mkdir $DIR/d26
> mkdir $DIR/d26/d26-2
> ln -s d26/d26-2 $DIR/s26
> touch $DIR/s26/foo || error
> }
> run_test 26a "multiple component symlink""
>
> test_26b() {
> mkdir -p $DIR/d26b/d26-2
> ln -s d26b/d26-2/foo $DIR/s26-2
> touch $DIR/s26-2 || error
> }
> run_test 26b "multiple component symlink at end of lookup""
>
> test_26c() {
> mkdir $DIR/d26.2
> touch $DIR/d26.2/foo
> ln -s d26.2 $DIR/s26.2-1
> ln -s s26.2-1 $DIR/s26.2-2
> ln -s s26.2-2 $DIR/s26.2-3
> chmod 0666 $DIR/s26.2-3/foo
> }
> run_test 26c "chain of symlinks""
>
> # recursive symlinks (bug 439)
> test_26d() {
> ln -s d26-3/foo $DIR/d26-3
> }
> run_test 26d "create multiple component recursive symlink""
>
> test_26e() {
> [ ! -h $DIR/d26-3 ] && test_26d
> rm $DIR/d26-3
> }
> run_test 26e "unlink multiple component recursive symlink""
>
> # recursive symlinks (bug 7022)
> test_26f() {
> mkdir -p $DIR/$tdir
> mkdir $DIR/$tdir/$tfile || error "mkdir $DIR/$tdir/$tfile
> failed"
> cd $DIR/$tdir/$tfile || error "cd $DIR/$tdir/$tfile
> failed"
> mkdir -p lndir/bar1 || error "mkdir lndir/bar1 failed"
> mkdir $tfile || error "mkdir $tfile failed"
> cd $tfile || error "cd $tfile failed"
> ln -s .. dotdot || error "ln dotdot failed"
> ln -s dotdot/lndir lndir || error "ln lndir failed"
> cd $DIR/$tdir || error "cd $DIR/$tdir failed"
> output=`ls $tfile/$tfile/lndir/bar1`
> [ "$output"" bar1 ] && error "unexpected output"
> rm -r $tfile || error "rm $tfile failed"
> $CHECKSTAT -a $DIR/$tfile || error "$tfile not gone"
> }
> run_test 26f "rm -r of a directory which has recursive symlink""
>
> # createtest also checks that device nodes are created and
> # then visible correctly (#2091)
> test_28() { # bug 2091
> mkdir $DIR/d28
> $CREATETEST $DIR/d28/ct || error
> }
> run_test 28 "create/mknod/mkdir with bad file types""
>
> test_30() {
> cp `which ls` $DIR || cp /bin/ls $DIR
> $DIR/ls /
> rm $DIR/ls
> }
> run_test 30 "run binary from Lustre (execve)""
>
> test_31a() {
> $OPENUNLINK $DIR/f31 $DIR/f31 || error
> $CHECKSTAT -a $DIR/f31 || error
> }
> run_test 31a "open-unlink file""
>
> test_31b() {
> touch $DIR/f31 || error
> ln $DIR/f31 $DIR/f31b || error
> multiop $DIR/f31b Ouc || error
> $CHECKSTAT -t file $DIR/f31 || error
> }
> run_test 31b "unlink file with multiple links while open""
>
> test_31c() {
> touch $DIR/f31 || error
> ln $DIR/f31 $DIR/f31c || error
> multiop_bg_pause $DIR/f31 O_uc || return 1
> MULTIPID=$!
> multiop $DIR/f31c Ouc
> kill -USR1 $MULTIPID
> wait $MULTIPID
> }
> run_test 31c "open-unlink file with multiple links""
>
> test_31d() {
> opendirunlink $DIR/d31d $DIR/d31d || error
> $CHECKSTAT -a $DIR/d31d || error
> }
> run_test 31d "remove of open directory""
>
> test_31e() { # bug 2904
> check_kernel_version 34 || return 0
> openfilleddirunlink $DIR/d31e || error
> }
> run_test 31e "remove of open non-empty directory""
>
> test_31f() { # bug 4554
> set -vx
> mkdir $DIR/d31f
> $SETSTRIPE $DIR/d31f -s 1048576 -c 1
> cp /etc/hosts $DIR/d31f
> ls -l $DIR/d31f
> multiop_bg_pause $DIR/d31f D_c || return 1
> MULTIPID=$!
>
> rm -rv $DIR/d31f || error "first of $DIR/d31f"
> mkdir $DIR/d31f
> $SETSTRIPE $DIR/d31f -s 1048576 -c 1
> cp /etc/hosts $DIR/d31f
> ls -l $DIR/d31f
> $DIR/d31f/hosts
> multiop_bg_pause $DIR/d31f D_c || return 1
> MULTIPID2=$!
>
> kill -USR1 $MULTIPID || error "first opendir $MULTIPID not running"
> wait $MULTIPID || error "first opendir $MULTIPID failed"
>
> sleep 6
>
> kill -USR1 $MULTIPID2 || error "second opendir $MULTIPID not
> running"
> wait $MULTIPID2 || error "second opendir $MULTIPID2 failed"
> set +vx
> }
> run_test 31f "remove of open directory with open-unlink file""
>
> test_31g() {
> echo "-- cross directory link --"
> mkdir $DIR/d31g{a,b}
> touch $DIR/d31ga/f
> ln $DIR/d31ga/f $DIR/d31gb/g
> $CHECKSTAT -t file $DIR/d31ga/f || error "source"
> [ `stat -c%h $DIR/d31ga/f`" '2' ] || error "source nlink"
> $CHECKSTAT -t file $DIR/d31gb/g || error "target"
> [ `stat -c%h $DIR/d31gb/g`" '2' ] || error "target nlink"
> }
> run_test 31g "cross directory link==============="
>
> test_31h() {
> echo "-- cross directory link --"
> mkdir $DIR/d31h
> mkdir $DIR/d31h/dir
> touch $DIR/d31h/f
> ln $DIR/d31h/f $DIR/d31h/dir/g
> $CHECKSTAT -t file $DIR/d31h/f || error "source"
> [ `stat -c%h $DIR/d31h/f`" '2' ] || error "source nlink"
> $CHECKSTAT -t file $DIR/d31h/dir/g || error "target"
> [ `stat -c%h $DIR/d31h/dir/g`" '2' ] || error "target nlink"
> }
> run_test 31h "cross directory link under child==============="
>
> test_31i() {
> echo "-- cross directory link --"
> mkdir $DIR/d31i
> mkdir $DIR/d31i/dir
> touch $DIR/d31i/dir/f
> ln $DIR/d31i/dir/f $DIR/d31i/g
> $CHECKSTAT -t file $DIR/d31i/dir/f || error "source"
> [ `stat -c%h $DIR/d31i/dir/f`" '2' ] || error "source nlink"
> $CHECKSTAT -t file $DIR/d31i/g || error "target"
> [ `stat -c%h $DIR/d31i/g`" '2' ] || error "target nlink"
> }
> run_test 31i "cross directory link under parent==============="
>
>
> test_31j() {
> mkdir $DIR/d31j
> mkdir $DIR/d31j/dir1
> ln $DIR/d31j/dir1 $DIR/d31j/dir2 && error "ln for dir"
> link $DIR/d31j/dir1 $DIR/d31j/dir3 && error "link for dir"
> mlink $DIR/d31j/dir1 $DIR/d31j/dir4 && error "mlink for dir"
> mlink $DIR/d31j/dir1 $DIR/d31j/dir1 && error "mlink to the same dir"
> return 0
> }
> run_test 31j "link for directory==============="
>
>
> test_31k() {
> mkdir $DIR/d31k
> touch $DIR/d31k/s
> touch $DIR/d31k/exist
> mlink $DIR/d31k/s $DIR/d31k/t || error "mlink"
> mlink $DIR/d31k/s $DIR/d31k/exist && error "mlink to exist file"
> mlink $DIR/d31k/s $DIR/d31k/s && error "mlink to the same file"
> mlink $DIR/d31k/s $DIR/d31k && error "mlink to parent dir"
> mlink $DIR/d31k $DIR/d31k/s && error "mlink parent dir to target"
> mlink $DIR/d31k/not-exist $DIR/d31k/foo && error "mlink non-existing
> to new"
> mlink $DIR/d31k/not-exist $DIR/d31k/s && error "mlink non-existing
> to exist"
> return 0
> }
> run_test 31k "link to file: the same, non-existing, dir==============="
>
> test_31m() {
> mkdir $DIR/d31m
> touch $DIR/d31m/s
> mkdir $DIR/d31m2
> touch $DIR/d31m2/exist
> mlink $DIR/d31m/s $DIR/d31m2/t || error "mlink"
> mlink $DIR/d31m/s $DIR/d31m2/exist && error "mlink to exist file"
> mlink $DIR/d31m/s $DIR/d31m2 && error "mlink to parent dir"
> mlink $DIR/d31m2 $DIR/d31m/s && error "mlink parent dir to target"
> mlink $DIR/d31m/not-exist $DIR/d31m2/foo && error "mlink
> non-existing to new"
> mlink $DIR/d31m/not-exist $DIR/d31m2/s && error "mlink non-existing
> to exist"
> return 0
> }
> run_test 31m "link to file: the same, non-existing, dir==============="
>
> test_32a() {
> echo "== more mountpoints and symlinks""
> [ -e $DIR/d32a ] && rm -fr $DIR/d32a
> mkdir -p $DIR/d32a/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32a/ext2-mountpoint || error
> $CHECKSTAT -t dir $DIR/d32a/ext2-mountpoint/.. || error
> $UMOUNT $DIR/d32a/ext2-mountpoint || error
> }
> run_test 32a "stat d32a/ext2-mountpoint/..""
>
> test_32b() {
> [ -e $DIR/d32b ] && rm -fr $DIR/d32b
> mkdir -p $DIR/d32b/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32b/ext2-mountpoint || error
> ls -al $DIR/d32b/ext2-mountpoint/.. || error
> $UMOUNT $DIR/d32b/ext2-mountpoint || error
> }
> run_test 32b "open d32b/ext2-mountpoint/..""
>
> test_32c() {
> [ -e $DIR/d32c ] && rm -fr $DIR/d32c
> mkdir -p $DIR/d32c/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32c/ext2-mountpoint || error
> mkdir -p $DIR/d32c/d2/test_dir
> $CHECKSTAT -t dir $DIR/d32c/ext2-mountpoint/../d2/test_dir || error
> $UMOUNT $DIR/d32c/ext2-mountpoint || error
> }
> run_test 32c "stat d32c/ext2-mountpoint/../d2/test_dir""
>
> test_32d() {
> [ -e $DIR/d32d ] && rm -fr $DIR/d32d
> mkdir -p $DIR/d32d/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32d/ext2-mountpoint || error
> mkdir -p $DIR/d32d/d2/test_dir
> ls -al $DIR/d32d/ext2-mountpoint/../d2/test_dir || error
> $UMOUNT $DIR/d32d/ext2-mountpoint || error
> }
> run_test 32d "open d32d/ext2-mountpoint/../d2/test_dir""
>
> test_32e() {
> [ -e $DIR/d32e ] && rm -fr $DIR/d32e
> mkdir -p $DIR/d32e/tmp
> TMP_DIR=$DIR/d32e/tmp
> ln -s $DIR/d32e $TMP_DIR/symlink11
> ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
> $CHECKSTAT -t link $DIR/d32e/tmp/symlink11 || error
> $CHECKSTAT -t link $DIR/d32e/symlink01 || error
> }
> run_test 32e "stat d32e/symlink->tmp/symlink->lustre-subdir""
>
> test_32f() {
> [ -e $DIR/d32f ] && rm -fr $DIR/d32f
> mkdir -p $DIR/d32f/tmp
> TMP_DIR=$DIR/d32f/tmp
> ln -s $DIR/d32f $TMP_DIR/symlink11
> ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
> ls $DIR/d32f/tmp/symlink11 || error
> ls $DIR/d32f/symlink01 || error
> }
> run_test 32f "open d32f/symlink->tmp/symlink->lustre-subdir""
>
> test_32g() {
> TMP_DIR=$DIR/$tdir/tmp
> mkdir -p $TMP_DIR $DIR/${tdir}2
> ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
> ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
> $CHECKSTAT -t link $TMP_DIR/symlink12 || error
> $CHECKSTAT -t link $DIR/$tdir/symlink02 || error
> $CHECKSTAT -t dir -f $TMP_DIR/symlink12 || error
> $CHECKSTAT -t dir -f $DIR/$tdir/symlink02 || error
> }
> run_test 32g "stat d32g/symlink->tmp/symlink->lustre-subdir/${tdir}2"
>
> test_32h() {
> rm -fr $DIR/$tdir $DIR/${tdir}2
> TMP_DIR=$DIR/$tdir/tmp
> mkdir -p $TMP_DIR $DIR/${tdir}2
> ln -s $DIR/${tdir}2 $TMP_DIR/symlink12
> ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
> ls $TMP_DIR/symlink12 || error
> ls $DIR/$tdir/symlink02 || error
> }
> run_test 32h "open d32h/symlink->tmp/symlink->lustre-subdir/${tdir}2"
>
> test_32i() {
> [ -e $DIR/d32i ] && rm -fr $DIR/d32i
> mkdir -p $DIR/d32i/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32i/ext2-mountpoint || error
> touch $DIR/d32i/test_file
> $CHECKSTAT -t file $DIR/d32i/ext2-mountpoint/../test_file || error
> $UMOUNT $DIR/d32i/ext2-mountpoint || error
> }
> run_test 32i "stat d32i/ext2-mountpoint/../test_file""
>
> test_32j() {
> [ -e $DIR/d32j ] && rm -fr $DIR/d32j
> mkdir -p $DIR/d32j/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32j/ext2-mountpoint || error
> touch $DIR/d32j/test_file
> cat $DIR/d32j/ext2-mountpoint/../test_file || error
> $UMOUNT $DIR/d32j/ext2-mountpoint || error
> }
> run_test 32j "open d32j/ext2-mountpoint/../test_file""
>
> test_32k() {
> rm -fr $DIR/d32k
> mkdir -p $DIR/d32k/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32k/ext2-mountpoint
> mkdir -p $DIR/d32k/d2
> touch $DIR/d32k/d2/test_file || error
> $CHECKSTAT -t file $DIR/d32k/ext2-mountpoint/../d2/test_file ||
> error
> $UMOUNT $DIR/d32k/ext2-mountpoint || error
> }
> run_test 32k "stat d32k/ext2-mountpoint/../d2/test_file""
>
> test_32l() {
> rm -fr $DIR/d32l
> mkdir -p $DIR/d32l/ext2-mountpoint
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32l/ext2-mountpoint || error
> mkdir -p $DIR/d32l/d2
> touch $DIR/d32l/d2/test_file
> cat $DIR/d32l/ext2-mountpoint/../d2/test_file || error
> $UMOUNT $DIR/d32l/ext2-mountpoint || error
> }
> run_test 32l "open d32l/ext2-mountpoint/../d2/test_file""
>
> test_32m() {
> rm -fr $DIR/d32m
> mkdir -p $DIR/d32m/tmp
> TMP_DIR=$DIR/d32m/tmp
> ln -s $DIR $TMP_DIR/symlink11
> ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
> $CHECKSTAT -t link $DIR/d32m/tmp/symlink11 || error
> $CHECKSTAT -t link $DIR/d32m/symlink01 || error
> }
> run_test 32m "stat d32m/symlink->tmp/symlink->lustre-root""
>
> test_32n() {
> rm -fr $DIR/d32n
> mkdir -p $DIR/d32n/tmp
> TMP_DIR=$DIR/d32n/tmp
> ln -s $DIR $TMP_DIR/symlink11
> ln -s $TMP_DIR/symlink11 $TMP_DIR/../symlink01
> ls -l $DIR/d32n/tmp/symlink11 || error
> ls -l $DIR/d32n/symlink01 || error
> }
> run_test 32n "open d32n/symlink->tmp/symlink->lustre-root""
>
> test_32o() {
> rm -fr $DIR/d32o $DIR/$tfile
> touch $DIR/$tfile
> mkdir -p $DIR/d32o/tmp
> TMP_DIR=$DIR/d32o/tmp
> ln -s $DIR/$tfile $TMP_DIR/symlink12
> ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
> $CHECKSTAT -t link $DIR/d32o/tmp/symlink12 || error
> $CHECKSTAT -t link $DIR/d32o/symlink02 || error
> $CHECKSTAT -t file -f $DIR/d32o/tmp/symlink12 || error
> $CHECKSTAT -t file -f $DIR/d32o/symlink02 || error
> }
> run_test 32o "stat d32o/symlink->tmp/symlink->lustre-root/$tfile"
>
> test_32p() {
> log 32p_1
> rm -fr $DIR/d32p
> log 32p_2
> rm -f $DIR/$tfile
> log 32p_3
> touch $DIR/$tfile
> log 32p_4
> mkdir -p $DIR/d32p/tmp
> log 32p_5
> TMP_DIR=$DIR/d32p/tmp
> log 32p_6
> ln -s $DIR/$tfile $TMP_DIR/symlink12
> log 32p_7
> ln -s $TMP_DIR/symlink12 $TMP_DIR/../symlink02
> log 32p_8
> cat $DIR/d32p/tmp/symlink12 || error
> log 32p_9
> cat $DIR/d32p/symlink02 || error
> log 32p_10
> }
> run_test 32p "open d32p/symlink->tmp/symlink->lustre-root/$tfile"
>
> test_32q() {
> [ -e $DIR/d32q ] && rm -fr $DIR/d32q
> mkdir -p $DIR/d32q
> touch $DIR/d32q/under_the_mount
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32q
> ls $DIR/d32q/under_the_mount && error || true
> $UMOUNT $DIR/d32q || error
> }
> run_test 32q "stat follows mountpoints in Lustre (should return error)"
>
> test_32r() {
> [ -e $DIR/d32r ] && rm -fr $DIR/d32r
> mkdir -p $DIR/d32r
> touch $DIR/d32r/under_the_mount
> mount -t ext2 -o loop $EXT2_DEV $DIR/d32r
> ls $DIR/d32r | grep -q under_the_mount && error || true
> $UMOUNT $DIR/d32r || error
> }
> run_test 32r "opendir follows mountpoints in Lustre (should return error)"
>
> test_33() {
> rm -f $DIR/$tfile
> touch $DIR/$tfile
> chmod 444 $DIR/$tfile
> chown $RUNAS_ID $DIR/$tfile
> log 33_1
> $RUNAS $OPENFILE -f O_RDWR $DIR/$tfile && error || true
> log 33_2
> }
> run_test 33 "write file with mode 444 (should return error)""
>
> test_33a() {
> rm -fr $DIR/d33
> mkdir -p $DIR/d33
> chown $RUNAS_ID $DIR/d33
> $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33|| error
> "create"
> $RUNAS $OPENFILE -f O_RDWR:O_CREAT -m 0444 $DIR/d33/f33 && \
> error "open RDWR" || true
> }
> run_test 33a "test open file(mode=0444) with O_RDWR (should return error)"
>
> test_33b() {
> rm -fr $DIR/d33
> mkdir -p $DIR/d33
> chown $RUNAS_ID $DIR/d33
> $RUNAS $OPENFILE -f 1286739555 $DIR/d33/f33 && error "create" ||
> true
> }
> run_test 33b "test open file with malformed flags (No panic and return
> error)"
>
> TEST_34_SIZE=${TEST_34_SIZE:-2000000000000}
> test_34a() {
> rm -f $DIR/f34
> $MCREATE $DIR/f34 || error
> $TRUNCATE $DIR/f34 $TEST_34_SIZE || error
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> }
> run_test 34a "truncate file that has not been opened""
>
> test_34b() {
> [ ! -f $DIR/f34 ] && test_34a
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> $OPENFILE -f O_RDONLY $DIR/f34
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> }
> run_test 34b "O_RDONLY opening file doesn't create objects""
>
> test_34c() {
> [ ! -f $DIR/f34 ] && test_34a
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> $OPENFILE -f O_RDWR $DIR/f34
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> }
> run_test 34c "O_RDWR opening file-with-size works""
>
> test_34d() {
> [ ! -f $DIR/f34 ] && test_34a
> dd if=/dev/zero of=$DIR/f34 conv=notrunc bs=4k count=1 || error
> $CHECKSTAT -s $TEST_34_SIZE $DIR/f34 || error
> rm $DIR/f34
> }
> run_test 34d "write to sparse file""
>
> test_34e() {
> rm -f $DIR/f34e
> $MCREATE $DIR/f34e || error
> $TRUNCATE $DIR/f34e 1000 || error
> $CHECKSTAT -s 1000 $DIR/f34e || error
> $OPENFILE -f O_RDWR $DIR/f34e
> $CHECKSTAT -s 1000 $DIR/f34e || error
> }
> run_test 34e "create objects, some with size and some without""
>
> test_34f() { # bug 6242, 6243
> SIZE34F=48000
> rm -f $DIR/f34f
> $MCREATE $DIR/f34f || error
> $TRUNCATE $DIR/f34f $SIZE34F || error "truncating $DIR/f3f to
> $SIZE34F"
> dd if=$DIR/f34f of=$TMP/f34f
> $CHECKSTAT -s $SIZE34F $TMP/f34f || error "$TMP/f34f not $SIZE34F
> bytes"
> dd if=/dev/zero of=$TMP/f34fzero bs=$SIZE34F count=1
> cmp $DIR/f34f $TMP/f34fzero || error "$DIR/f34f not all zero"
> cmp $TMP/f34f $TMP/f34fzero || error "$TMP/f34f not all zero"
> rm $TMP/f34f $TMP/f34fzero $DIR/f34f
> }
> run_test 34f "read from a file with no objects until EOF""
>
> test_35a() {
> cp /bin/sh $DIR/f35a
> chmod 444 $DIR/f35a
> chown $RUNAS_ID $DIR/f35a
> $RUNAS $DIR/f35a && error || true
> rm $DIR/f35a
> }
> run_test 35a "exec file with mode 444 (should return and not leak)""
>
> test_36a() {
> rm -f $DIR/f36
> utime $DIR/f36 || error
> }
> run_test 36a "MDS utime check (mknod, utime)""
>
> test_36b() {
> echo "" > $DIR/f36
> utime $DIR/f36 || error
> }
> run_test 36b "OST utime check (open, utime)""
>
> test_36c() {
> rm -f $DIR/d36/f36
> mkdir $DIR/d36
> chown $RUNAS_ID $DIR/d36
> $RUNAS utime $DIR/d36/f36 || error
> }
> run_test 36c "non-root MDS utime check (mknod, utime)""
>
> test_36d() {
> [ ! -d $DIR/d36 ] && test_36c
> echo "" > $DIR/d36/f36
> $RUNAS utime $DIR/d36/f36 || error
> }
> run_test 36d "non-root OST utime check (open, utime)""
>
> test_36e() {
> [ $RUNAS_ID -eq $UID ] && skip "RUNAS_ID" UID = $UID -- skipping" &&
> return
> mkdir -p $DIR/$tdir
> touch $DIR/$tdir/$tfile
> $RUNAS utime $DIR/$tdir/$tfile && \
> error "utime worked, expected failure" || true
> }
> run_test 36e "utime on non-owned file (should return error)""
>
> test_37() {
> mkdir -p $DIR/$tdir
> echo f > $DIR/$tdir/fbugfile
> mount -t ext2 -o loop $EXT2_DEV $DIR/$tdir
> ls $DIR/$tdir | grep "\<fbugfile\>" && error
> $UMOUNT $DIR/$tdir || error
> rm -f $DIR/$tdir/fbugfile || error
> }
> run_test 37 "ls a mounted file system to check old content""
>
> test_38() {
> local file=$DIR/$tfile
> touch $file
> openfile -f O_DIRECTORY $file
> local RC=$?
> local ENOTDIR=20
> [ $RC -eq 0 ] && error "opened file $file with O_DIRECTORY" || true
> [ $RC -eq $ENOTDIR ] || error "error $RC should be ENOTDIR
> ($ENOTDIR)"
> }
> run_test 38 "open a regular file with O_DIRECTORY should return -ENOTDIR""
>
> test_39() {
> touch $DIR/$tfile
> touch $DIR/${tfile}2
> # ls -l $DIR/$tfile $DIR/${tfile}2
> # ls -lu $DIR/$tfile $DIR/${tfile}2
> # ls -lc $DIR/$tfile $DIR/${tfile}2
> sleep 2
> $OPENFILE -f O_CREAT:O_TRUNC:O_WRONLY $DIR/${tfile}2
> if [ ! $DIR/${tfile}2 -nt $DIR/$tfile ]; then
> echo "mtime"
> ls -l $DIR/$tfile $DIR/${tfile}2
> echo "atime"
> ls -lu $DIR/$tfile $DIR/${tfile}2
> echo "ctime"
> ls -lc $DIR/$tfile $DIR/${tfile}2
> error "O_TRUNC didn't change timestamps"
> fi
> }
> run_test 39 "mtime changed on create""
>
> test_40() {
> dd if=/dev/zero of=$DIR/f40 bs=4096 count=1
> $RUNAS $OPENFILE -f O_WRONLY:O_TRUNC $DIR/f40 && error
> $CHECKSTAT -t file -s 4096 $DIR/f40 || error
> }
> run_test 40 "failed open(O_TRUNC) doesn't truncate""
>
> test_43() {
> mkdir -p $DIR/$tdir
> cp -p /bin/ls $DIR/$tdir/$tfile
> multiop $DIR/$tdir/$tfile Ow_c &
> pid=$!
> # give multiop a chance to open
> sleep 1
>
> $DIR/$tdir/$tfile && error || true
> kill -USR1 $pid
> }
> run_test 43 "execution of file opened for write should return -ETXTBSY"
>
> test_43a() {
> mkdir -p $DIR/d43
> cp -p `which multiop` $DIR/d43/multiop || cp -p multiop
> $DIR/d43/multiop
> MULTIOP_PROG=$DIR/d43/multiop multiop_bg_pause $TMP/test43.junk O_c
> || return 1
> MULTIOP_PID=$!
> multiop $DIR/d43/multiop Oc && error "expected error, got success"
> kill -USR1 $MULTIOP_PID || return 2
> wait $MULTIOP_PID || return 3
> rm $TMP/test43.junk
> }
> run_test 43a "open(RDWR) of file being executed should return -ETXTBSY"
>
> test_43b() {
> mkdir -p $DIR/d43
> cp -p `which multiop` $DIR/d43/multiop || cp -p multiop
> $DIR/d43/multiop
> MULTIOP_PROG=$DIR/d43/multiop multiop_bg_pause $TMP/test43.junk O_c
> || return 1
> MULTIOP_PID=$!
> truncate $DIR/d43/multiop 0 && error "expected error, got success"
> kill -USR1 $MULTIOP_PID || return 2
> wait $MULTIOP_PID || return 3
> rm $TMP/test43.junk
> }
> run_test 43b "truncate of file being executed should return -ETXTBSY"
>
> page_size() {
> getconf PAGE_SIZE
> }
>
> test_48a() { # bug 2399
> mkdir -p $DIR/d48a
> cd $DIR/d48a
> mv $DIR/d48a $DIR/d48.new || error "move directory failed"
> mkdir $DIR/d48a || error "recreate directory failed"
> touch foo || error "'touch foo' failed after recreating cwd"
> mkdir bar || error "'mkdir foo' failed after recreating cwd"
> touch .foo || error "'touch .foo' failed after recreating cwd"
> mkdir .bar || error "'mkdir .foo' failed after recreating cwd"
> ls . > /dev/null || error "'ls .' failed after recreating cwd"
> ls .. > /dev/null || error "'ls ..' failed after removing cwd"
> cd . || error "'cd .' failed after recreating cwd"
> mkdir . && error "'mkdir .' worked after recreating cwd"
> rmdir . && error "'rmdir .' worked after recreating cwd"
> ln -s . baz || error "'ln -s .' failed after recreating cwd"
> cd .. || error "'cd ..' failed after recreating cwd"
> }
> run_test 48a "Access renamed working dir (should return errors)="
>
> test_48b() { # bug 2399
> mkdir -p $DIR/d48b
> cd $DIR/d48b
> rmdir $DIR/d48b || error "remove cwd $DIR/d48b failed"
> touch foo && error "'touch foo' worked after removing cwd"
> mkdir foo && error "'mkdir foo' worked after removing cwd"
> touch .foo && error "'touch .foo' worked after removing cwd"
> mkdir .foo && error "'mkdir .foo' worked after removing cwd"
> ls . > /dev/null && error "'ls .' worked after removing cwd"
> ls .. > /dev/null || error "'ls ..' failed after removing cwd"
> mkdir . && error "'mkdir .' worked after removing cwd"
> rmdir . && error "'rmdir .' worked after removing cwd"
> ln -s . foo && error "'ln -s .' worked after removing cwd"
> cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3517
> }
> run_test 48b "Access removed working dir (should return errors)="
>
> test_48c() { # bug 2350
> mkdir -p $DIR/d48c/dir
> cd $DIR/d48c/dir
> rmdir $DIR/d48c/dir || error "remove cwd $DIR/d48c/dir failed"
> touch foo && error "'touch foo' worked after removing cwd"
> mkdir foo && error "'mkdir foo' worked after removing cwd"
> touch .foo && error "'touch .foo' worked after removing cwd"
> mkdir .foo && error "'mkdir .foo' worked after removing cwd"
> ls . && error "'ls .' worked after removing cwd"
> ls .. || error "'ls ..' failed after removing cwd"
> mkdir . && error "'mkdir .' worked after removing cwd"
> rmdir . && error "'rmdir .' worked after removing cwd"
> ln -s . foo && error "'ln -s .' worked after removing cwd"
> cd .. || echo "'cd ..' failed after removing cwd `pwd`" #bug 3415
> }
> run_test 48c "Access removed working subdir (should return errors)"
>
> test_48d() { # bug 2350
> mkdir -p $DIR/d48d/dir
> cd $DIR/d48d/dir
> rmdir $DIR/d48d/dir || error "remove cwd $DIR/d48d/dir failed"
> rmdir $DIR/d48d || error "remove parent $DIR/d48d failed"
> touch foo && error "'touch foo' worked after removing parent"
> mkdir foo && error "'mkdir foo' worked after removing parent"
> touch .foo && error "'touch .foo' worked after removing parent"
> mkdir .foo && error "'mkdir .foo' worked after removing parent"
> ls . && error "'ls .' worked after removing parent"
> ls .. && error "'ls ..' worked after removing parent"
> mkdir . && error "'mkdir .' worked after removing parent"
> rmdir . && error "'rmdir .' worked after removing parent"
> ln -s . foo && error "'ln -s .' worked after removing parent"
> }
> run_test 48d "Access removed parent subdir (should return errors)"
>
> test_48e() { # bug 4134
> mkdir -p $DIR/d48e/dir
> cd $DIR/d48e/dir
> rmdir $DIR/d48e/dir || error "remove cwd $DIR/d48e/dir failed"
> rmdir $DIR/d48e || error "remove parent $DIR/d48e failed"
> touch $DIR/d48e || error "'touch $DIR/d48e' failed"
> chmod +x $DIR/d48e || error "'chmod +x $DIR/d48e' failed"
> # On a buggy kernel addition of "touch foo" after cd .. will
> # produce kernel oops in lookup_hash_it
> touch ../foo && error "'cd ..' worked after recreate parent"
> cd $DIR
> rm $DIR/d48e || error "rm '$DIR/d48e' failed"
> }
> run_test 48e "Access to recreated parent subdir (should return errors)"
>
> test_50() {
> # bug 1485
> mkdir $DIR/d50
> cd $DIR/d50
> ls /proc/$$/cwd || error
> }
> run_test 50 "special situations: /proc symlinks ""
>
> test_51a() { # was test_51
> # bug 1516 - create an empty entry right after ".." then split dir
> mkdir $DIR/d51
> touch $DIR/d51/foo
> $MCREATE $DIR/d51/bar
> rm $DIR/d51/foo
> createmany -m $DIR/d51/longfile 201
> FNUM=202
> while [ `ls -sd $DIR/d51 | awk '{ print $1 }'` -eq 4 ]; do
> $MCREATE $DIR/d51/longfile$FNUM
> FNUM=$(($FNUM + 1))
> echo -n "+"
> done
> echo
> ls -l $DIR/d51 > /dev/null || error
> }
> run_test 51a "special situations: split htree with empty entry""
>
> export NUMTEST=70000
> test_51b() {
> NUMFREE=`df -i -P $DIR | tail -n 1 | awk '{ print $4 }'`
> [ $NUMFREE -lt 21000 ] && \
> skip "not enough free inodes ($NUMFREE)" && \
> return
>
> check_kernel_version 40 || NUMTEST=31000
> [ $NUMFREE -lt $NUMTEST ] && NUMTEST=$(($NUMFREE - 50))
>
> mkdir -p $DIR/d51b
> createmany -d $DIR/d51b/t- $NUMTEST
> }
> run_test 51b "mkdir .../t-0 --- .../t-$NUMTEST""
>
> test_51c() {
> [ ! -d $DIR/d51b ] && skip "$DIR/51b missing" && \
> return
>
> unlinkmany -d $DIR/d51b/t- $NUMTEST
> }
> run_test 51c "rmdir .../t-0 --- .../t-$NUMTEST""
>
> test_52a() {
> [ -f $DIR/d52a/foo ] && chattr -a $DIR/d52a/foo
> mkdir -p $DIR/d52a
> touch $DIR/d52a/foo
> chattr"a $DIR/d52a/foo || error "chattr =a failed"
> echo bar >> $DIR/d52a/foo || error "append bar failed"
> cp /etc/hosts $DIR/d52a/foo && error "cp worked"
> rm -f $DIR/d52a/foo 2>/dev/null && error "rm worked"
> link $DIR/d52a/foo $DIR/d52a/foo_link 2>/dev/null && error "link
> worked"
> echo foo >> $DIR/d52a/foo || error "append foo failed"
> mrename $DIR/d52a/foo $DIR/d52a/foo_ren && error "rename worked"
> lsattr $DIR/d52a/foo | egrep -q "^-+a-+ $DIR/d52a/foo" || error
> "lsattr"
> chattr -a $DIR/d52a/foo || error "chattr -a failed"
>
> rm -fr $DIR/d52a || error "cleanup rm failed"
> }
> run_test 52a "append-only flag test (should return errors)""
>
> test_52b() {
> [ -f $DIR/d52b/foo ] && chattr -i $DIR/d52b/foo
> mkdir -p $DIR/d52b
> touch $DIR/d52b/foo
> chattr"i $DIR/d52b/foo || error
> cat test > $DIR/d52b/foo && error
> cp /etc/hosts $DIR/d52b/foo && error
> rm -f $DIR/d52b/foo 2>/dev/null && error
> link $DIR/d52b/foo $DIR/d52b/foo_link 2>/dev/null && error
> echo foo >> $DIR/d52b/foo && error
> mrename $DIR/d52b/foo $DIR/d52b/foo_ren && error
> [ -f $DIR/d52b/foo ] || error
> [ -f $DIR/d52b/foo_ren ] && error
> lsattr $DIR/d52b/foo | egrep -q "^-+i-+ $DIR/d52b/foo" || error
> chattr -i $DIR/d52b/foo || error
>
> rm -fr $DIR/d52b || error
> }
> run_test 52b "immutable flag test (should return errors)""
>
> test_54b() {
> f="$DIR/f54b"
> mknod $f c 1 3
> chmod 0666 $f
> dd if=/dev/zero of=$f bs=`page_size` count=1
> }
> run_test 54b "char device works in lustre""
>
> find_loop_dev() {
> [ -b /dev/loop/0 ] && LOOPBASE=/dev/loop/
> [ -b /dev/loop0 ] && LOOPBASE=/dev/loop
> [ -z "$LOOPBASE" ] && echo "/dev/loop/0 and /dev/loop0 gone?" &&
> return
>
> for i in `seq 3 7`; do
> losetup $LOOPBASE$i > /dev/null 2>&1 && continue
> LOOPDEV=$LOOPBASE$i
> LOOPNUM=$i
> break
> done
> }
>
> test_54c() {
> tfile="$DIR/f54c"
> tdir="$DIR/d54c"
> loopdev="$DIR/loop54c"
>
> find_loop_dev
> [ -z "$LOOPNUM" ] && echo "couldn't find empty loop device" &&
> return
> mknod $loopdev b 7 $LOOPNUM
> echo "make a loop file system with $tfile on $loopdev ($LOOPNUM)..."
> dd if=/dev/zero of=$tfile bs=`page_size` seek=1024 count=1 >
> /dev/null
> losetup $loopdev $tfile || error "can't set up $loopdev for $tfile"
> mkfs.ext2 $loopdev || error "mke2fs on $loopdev"
> mkdir -p $tdir
> mount -t ext2 $loopdev $tdir || error "error mounting $loopdev on
> $tdir"
> dd if=/dev/zero of=$tdir/tmp bs=`page_size` count=30 || error "dd
> write"
> df $tdir
> dd if=$tdir/tmp of=/dev/zero bs=`page_size` count=30 || error "dd
> read"
> $UMOUNT $tdir
> losetup -d $loopdev
> rm $loopdev
> }
> run_test 54c "block device works in lustre""
>
> test_54d() {
> f="$DIR/f54d"
> string="aaaaaa"
> mknod $f p
> [ "$string"" `echo $string > $f | cat $f` ] || error
> }
> run_test 54d "fifo device works in lustre""
>
> test_54e() {
> check_kernel_version 46 || return 0
> f="$DIR/f54e"
> string="aaaaaa"
> cp -aL /dev/console $f
> echo $string > $f || error
> }
> run_test 54e "console/tty device works in lustre""
>
> test_61() {
> f="$DIR/f61"
> dd if=/dev/zero of=$f bs=`page_size` count=1
> multiop $f OSMWUc || error
> sync
> }
> run_test 61 "mmap() writes don't make sync hang""
>
> # bug 2543 - update blocks count on client
> test_66() {
> COUNT=${COUNT:-8}
> dd if=/dev/zero of=$DIR/f66 bs=1k count=$COUNT
> sync; sleep 1; sync
> BLOCKS=`ls -s $DIR/f66 | awk '{ print $1 }'`
> [ $BLOCKS -ge $COUNT ] || error "$DIR/f66 blocks $BLOCKS < $COUNT"
> }
> run_test 66 "update inode blocks count on client""
>
> LLOOP=
> cleanup_68() {
> trap 0
> if [ ! -z "$LLOOP" ]; then
> if swapon -s | grep -q $LLOOP; then
> swapoff $LLOOP || error "swapoff failed"
> fi
>
> losetup -d $LOOPDEV || error "detach failed"
> unset LOOPDEV
> unset LLOOP
> fi
> rm -f $DIR/f68*
> }
>
> meminfo() {
> awk '($1" "'$1':") { print $2 }' /proc/meminfo
> }
>
> swap_used() {
> swapon -s | awk '($1" "'$1'") { print $4 }'
> }
>
> # excercise swapping to lustre by adding a high priority swapfile entry
> # and then consuming memory until it is used.
> test_68b() { # was test_68
> [ "$UID" != 0 ] && skip "must run as root" && return
>
> MEMTOTAL=`meminfo MemTotal`
> NR_BLOCKS=$((MEMTOTAL>>8))
> [[ $NR_BLOCKS -le 2048 ]] && NR_BLOCKS=2048
>
> dd if=/dev/zero of=$DIR/f68b bs=64k seek=$NR_BLOCKS count=1
> mkswap $DIR/f68b
>
> trap cleanup_68 EXIT
>
> swapon -p 32767 $LLOOP || error "swapon $LLOOP failed"
>
> echo "before: `swapon -s | grep $LLOOP`"
> $MEMHOG $MEMTOTAL || error "error allocating $MEMTOTAL kB"
> echo "after: `swapon -s | grep $LLOOP`"
> SWAPUSED=`swap_used $LLOOP`
>
> cleanup_68
>
> [ $SWAPUSED -eq 0 ] && echo "no swap used???" || true
> }
> run_test 68b "support swapping to Lustre""
>
> test_72() { # bug 5695 - Test that on 2.6 remove_suid works properly
> [ "$RUNAS_ID"" "$UID" ] && skip "RUNAS_ID = UID = $UID -- skipping"
> && return
>
> # Check that testing environment is properly set up. Skip if not
> FAIL_ON_ERROR=false check_runas_id_ret $RUNAS_ID $RUNAS_ID $RUNAS ||
> {
> skip "User $RUNAS_ID does not exist - skipping"
> return 0
> }
> touch $DIR/f72
> chmod 777 $DIR/f72
> chmod ug+s $DIR/f72
> $RUNAS dd if=/dev/zero of=$DIR/f72 bs=512 count=1 || error
> # See if we are still setuid/sgid
> test -u $DIR/f72 -o -g $DIR/f72 && error "S/gid is not dropped on
> write"
> }
> run_test 72 "Test that remove suid works properly (bug5695)""
>
> test_78() { # bug 10901
> NSEQ=5
> F78SIZE=$(($(awk '/MemFree:/ { print $2 }' /proc/meminfo) / 1024))
> echo "MemFree: $F78SIZE, Max file size: $MAXFREE"
> MEMTOTAL=$(($(awk '/MemTotal:/ { print $2 }' /proc/meminfo) / 1024))
> echo "MemTotal: $MEMTOTAL"
> # reserve 256MB of memory for the kernel and other running processes,
> # and then take 1/2 of the remaining memory for the read/write buffers.
> if [ $MEMTOTAL -gt 512 ] ;then
> MEMTOTAL=$(((MEMTOTAL - 256 ) / 2))
> else
> # for those poor memory-starved high-end clusters...
> MEMTOTAL=$((MEMTOTAL / 2))
> fi
> echo "Mem to use for directio: $MEMTOTAL"
> [ $F78SIZE -gt $MEMTOTAL ] && F78SIZE=$MEMTOTAL
> [ $F78SIZE -gt 512 ] && F78SIZE=512
> [ $F78SIZE -gt $((MAXFREE / 1024)) ] && F78SIZE=$((MAXFREE / 1024))
> SMALLEST=`df $DIR | awk '{print $4}' | tail -1`
> [ $SMALLEST -lt 10240 ] && \
> skip "too small OSTSIZE, useless to run large O_DIRECT test"
> && return 0
>
> [ $F78SIZE -gt $((SMALLEST * $OSTCOUNT / 1024 - 80)) ] && \
> F78SIZE=$((SMALLEST * $OSTCOUNT / 1024 - 80))
>
> [ "$SLOW"" "no" ] && NSEQ=1 && [ $F78SIZE -gt 32 ] && F78SIZE=32
> echo "File size: $F78SIZE"
> $SETSTRIPE $DIR/$tfile -c $OSTCOUNT || error "setstripe failed"
> for i in `seq 1 $NSEQ`
> do
> FSIZE=$(($F78SIZE / ($NSEQ - $i + 1)))
> echo directIO rdwr round $i of $NSEQ
> $DIRECTIO rdwr $DIR/$tfile 0 $FSIZE 1048576||error "rdwr
> failed"
> done
>
> rm -f $DIR/$tfile
> }
> run_test 78 "handle large O_DIRECT writes correctly""
>
> test_80() { # bug 10718
> dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1M
> sync; sleep 1; sync
> local BEFORE=`date +%s`
> cancel_lru_locks osc
> local AFTER=`date +%s`
> local DIFF=$((AFTER-BEFORE))
> if [ $DIFF -gt 1 ] ; then
> error "elapsed for 1M@1T" $DIFF"
> fi
> true
> rm -f $DIR/$tfile
> }
> run_test 80 "Page eviction is equally fast at high offsets too ""
>
> test_99a() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" && \
> return
> mkdir -p $DIR/d99cvsroot
> chown $RUNAS_ID $DIR/d99cvsroot
> local oldPWD=$PWD # bug 13584, use $TMP as working dir
> cd $TMP
>
> $RUNAS cvs -d $DIR/d99cvsroot init || error
> cd $oldPWD
> }
> run_test 99a "cvs init""
>
> test_99b() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" &&
> return
> [ ! -d $DIR/d99cvsroot ] && test_99a
> cd /etc/init.d
> # some versions of cvs import exit(1) when asked to import links or
> # files they can't read. ignore those files.
> TOIGNORE=$(find . -type l -printf '-I %f\n' -o \
> ! -perm +4 -printf '-I %f\n')
> $RUNAS cvs -d $DIR/d99cvsroot import -m "nomesg" $TOIGNORE \
> d99reposname vtag rtag
> }
> run_test 99b "cvs import""
>
> test_99c() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" &&
> return
> [ ! -d $DIR/d99cvsroot ] && test_99b
> cd $DIR
> mkdir -p $DIR/d99reposname
> chown $RUNAS_ID $DIR/d99reposname
> $RUNAS cvs -d $DIR/d99cvsroot co d99reposname
> }
> run_test 99c "cvs checkout""
>
> test_99d() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" &&
> return
> [ ! -d $DIR/d99cvsroot ] && test_99c
> cd $DIR/d99reposname
> $RUNAS touch foo99
> $RUNAS cvs add -m 'addmsg' foo99
> }
> run_test 99d "cvs add""
>
> test_99e() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" &&
> return
> [ ! -d $DIR/d99cvsroot ] && test_99c
> cd $DIR/d99reposname
> $RUNAS cvs update
> }
> run_test 99e "cvs update""
>
> test_99f() {
> [ -z "$(which cvs 2>/dev/null)" ] && skip "could not find cvs" &&
> return
> [ ! -d $DIR/d99cvsroot ] && test_99d
> cd $DIR/d99reposname
> $RUNAS cvs commit -m 'nomsg' foo99
> rm -fr $DIR/d99cvsroot
> }
> run_test 99f "cvs commit""
>
> function get_named_value()
> {
> local tag
>
> tag=$1
> while read ;do
> line=$REPLY
> case $line in
> $tag*)
> echo $line | sed "s/^$tag//"
> break
> ;;
> esac
> done
> }
>
> export SETUP_TEST102=no
> setup_test102() {
> [ "$SETUP_TEST102"" "yes" ] && return
> mkdir -p $DIR/$tdir
> chown $RUNAS_ID $DIR/$tdir
> STRIPE_SIZE=65536
> STRIPE_OFFSET=1
> STRIPE_COUNT=$OSTCOUNT
> [ $OSTCOUNT -gt 4 ] && STRIPE_COUNT=4
>
> trap cleanup_test102 EXIT
> cd $DIR
> $1 $SETSTRIPE $tdir -s $STRIPE_SIZE -i $STRIPE_OFFSET -c
> $STRIPE_COUNT
> cd $DIR/$tdir
> for num in 1 2 3 4
> do
> for count in `seq 1 $STRIPE_COUNT`
> do
> for offset in `seq 0 $[$STRIPE_COUNT - 1]`
> do
> local stripe_size=`expr $STRIPE_SIZE \*
> $num`
> local file=file"$num-$offset-$count"
> $1 $SETSTRIPE $file -s $stripe_size -i
> $offset -c $count
> done
> done
> done
>
> cd $DIR
> $1 $TAR cf $TMP/f102.tar $tdir --xattrs
> SETUP_TEST102=yes
> }
>
> cleanup_test102() {
> trap 0
> [ "$SETUP_TEST102"" "yes" ] || return 0
> rm -f $TMP/f102.tar
> SETUP_TEST102=no
> }
>
> test_102a() {
> local testfile=$DIR/xattr_testfile
>
> rm -f $testfile
> touch $testfile
>
> [ "$UID" != 0 ] && skip "must run as root" && return
> [ -z "`lctl get_param -n mdc.*-mdc-*.connect_flags | grep xattr`" ]
> && skip "must have user_xattr" && return
>
> [ -z "$(which setfattr 2>/dev/null)" ] && skip "could not find
> setfattr" && return
>
> echo "set/get xattr..."
> setfattr -n trusted.name1 -v value1 $testfile || error
> [ "`getfattr -n trusted.name1 $testfile 2> /dev/null | \
> grep "trusted.name1"`"" "trusted.name1=\"value1\"" ] || error
>
> setfattr -n user.author1 -v author1 $testfile || error
> [ "`getfattr -n user.author1 $testfile 2> /dev/null | \
> grep "user.author1"`"" "user.author1=\"author1\"" ] || error
>
> echo "listxattr..."
> setfattr -n trusted.name2 -v value2 $testfile || error
> setfattr -n trusted.name3 -v value3 $testfile || error
> [ `getfattr -d -m "^trusted" $testfile 2> /dev/null | \
> grep "trusted.name" | wc -l` -eq 3 ] || error
>
>
> setfattr -n user.author2 -v author2 $testfile || error
> setfattr -n user.author3 -v author3 $testfile || error
> [ `getfattr -d -m "^user" $testfile 2> /dev/null | \
> grep "user" | wc -l` -eq 3 ] || error
>
> echo "remove xattr..."
> setfattr -x trusted.name1 $testfile || error
> getfattr -d -m trusted $testfile 2> /dev/null | \
> grep "trusted.name1" && error || true
>
> setfattr -x user.author1 $testfile || error
> getfattr -d -m user $testfile 2> /dev/null | \
> grep "user.author1" && error || true
>
> # b10667: setting lustre special xattr be silently discarded
> echo "set lustre special xattr ..."
> setfattr -n "trusted.lov" -v "invalid value" $testfile || error
>
> rm -f $testfile
> }
> run_test 102a "user xattr test""
>
> test_106() { #bug 10921
> mkdir -p $DIR/$tdir
> $DIR/$tdir && error "exec $DIR/$tdir succeeded"
> chmod 777 $DIR/$tdir || error "chmod $DIR/$tdir failed"
> }
> run_test 106 "attempt exec of dir followed by chown of that dir"
>
> test_107() {
> CDIR=`pwd`
> cd $DIR
>
> local file=core
> rm -f $file
>
> local save_pattern=$(sysctl -n kernel.core_pattern)
> local save_uses_pid=$(sysctl -n kernel.core_uses_pid)
> sysctl -w kernel.core_pattern=$file
> sysctl -w kernel.core_uses_pid=0
>
> ulimit -c unlimited
> sleep 60 &
> SLEEPPID=$!
>
> sleep 1
>
> kill -s 11 $SLEEPPID
> wait $SLEEPPID
> if [ -e $file ]; then
> size=`stat -c%s $file`
> [ $size -eq 0 ] && error "Fail to create core file $file"
> else
> error "Fail to create core file $file"
> fi
> rm -f $file
> sysctl -w kernel.core_pattern=$save_pattern
> sysctl -w kernel.core_uses_pid=$save_uses_pid
> cd $CDIR
> }
> run_test 107 "Coredump on SIG"
>
> test_110() {
> mkdir -p $DIR/d110
> mkdir
> $DIR/d110/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
> || error "mkdir with 255 char fail"
> mkdir
> $DIR/d110/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
> && error "mkdir with 256 char should fail, but not"
> touch
> $DIR/d110/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> || error "create with 255 char fail"
> touch
> $DIR/d110/yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
> && error ""create with 256 char should fail, but not
>
> ls -l $DIR/d110
> rm -fr $DIR/d110
> }
> run_test 110 "filename length checking"
>
> test_119a() # bug 11737
> {
> BSIZE=$((512 * 1024))
> directio write $DIR/$tfile 0 1 $BSIZE
> # We ask to read two blocks, which is more than a file size.
> # directio will indicate an error when requested and actual
> # sizes aren't equal (a normal situation in this case) and
> # print actual read amount.
> NOB=`directio read $DIR/$tfile 0 2 $BSIZE | awk '/error/ {print
> $6}'`
> if [ "$NOB" != "$BSIZE" ]; then
> error "read $NOB bytes instead of $BSIZE"
> fi
> rm -f $DIR/$tfile
> }
> run_test 119a "Short directIO read must return actual read amount"
>
> test_119b() # bug 11737
> {
> dd if=/dev/zero of=$DIR/$tfile bs=1M count=1 seek=1 || error "dd
> failed"
> sync
> multiop $DIR/$tfile oO_RDONLY:O_DIRECT:r$((2048 * 1024)) || \
> error "direct read failed"
> rm -f $DIR/$tfile
> }
> run_test 119b "Sparse directIO read must return actual read amount"
>
> test_119c() # bug 13099
> {
> BSIZE=1048576
> directio write $DIR/$tfile 3 1 $BSIZE || error "direct write failed"
> directio readhole $DIR/$tfile 0 2 $BSIZE || error "reading hole
> failed"
> rm -f $DIR/$tfile
> }
> run_test 119c "Testing for direct read hitting hole"
>
> test_126() { # bug 12829/13455
> [ "$UID" != 0 ] && echo "skipping $TESTNAME (must run as root)" &&
> return
>
> $RUNAS -u 0 -g 1 touch $DIR/$tfile || error "touch failed"
> gid=`ls -n $DIR/$tfile | awk '{print $4}'`
> rm -f $DIR/$tfile
> [ $gid -eq "1" ] || error "gid is set to" $gid "instead of 1"
> }
> run_test 126 "check that the fsgid provided by the client is taken into
> account"
>
> OLDIFS="$IFS"
> cleanup_130() {
> trap 0
> IFS="$OLDIFS"
> }
>
> test_130a() {
> filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
> [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" &&
> return
>
> trap cleanup_130 EXIT RETURN
>
> local fm_file=$DIR/$tfile
> dd if=/dev/zero of=$fm_file bs=65536 count=1 || error "dd failed for
> $fm_file"
>
> filefrag -ves $fm_file || error "filefrag $fm_file failed"
> filefrag_op=`filefrag -ve $fm_file | grep -A 100 "ext:" | grep -v
> "ext:" | grep -v "found"`
>
> start_blk=`echo $filefrag_op | cut -d: -f2 | cut -d. -f1`
> IFS=$'\n'
> tot_len=0
> for line in $filefrag_op; do
> ext_len=`echo $line | cut -d: -f4`
> (( tot_len += ext_len ))
> done
>
> if (( start_blk != 0 || tot_len != 64 )); then
> cleanup_130
> error "FIEMAP on 1-stripe file($fm_file) failed;"
> return
> fi
>
> cleanup_130
>
> echo "FIEMAP on single striped file succeeded"
> }
> run_test 130a "FIEMAP (1-stripe file)"
>
> test_130e() {
> skip "this test needs cleanup for non-lustre"
> filefrag_op=$(filefrag -e 2>&1 | grep "invalid option")
> [ -n "$filefrag_op" ] && skip "filefrag does not support FIEMAP" &&
> return
>
> trap cleanup_130 EXIT RETURN
>
> local fm_file=$DIR/$tfile
> NUM_BLKS=512
> EXPECTED_LEN=$(( (NUM_BLKS / 2) * 4 ))
> for ((i" 0; i < $NUM_BLKS; i++))
> do
> dd if=/dev/zero of=$fm_file count=1 bs=4096 seek=$((2*$i))
> conv=notrunc > /dev/null 2>&1
> done
>
> filefrag -ves $fm_file || error "filefrag $fm_file failed"
> filefrag_op=`filefrag -ve $fm_file | grep -A 750 "ext:" | grep -v
> "ext:" | grep -v "found"`
>
> IFS=$'\n'
> tot_len=0
> for line in $filefrag_op; do
> ext_len=`echo $line | cut -d: -f4`
> (( tot_len += ext_len ))
> done
> if (( tot_len != $EXPECTED_LEN )); then
> cleanup_130
> error "FIEMAP on $fm_file failed; len $tot_len !=
> $EXPECTED_LEN"
> return
> fi
>
> cleanup_130
>
> echo "FIEMAP with continuation calls succeeded"
> }
> run_test 130e "FIEMAP (test continuation FIEMAP calls)"
>
> # Test for writev/readv
> test_131a() {
> rwv -f $DIR/$tfile -w -n 3 524288 1048576 1572864 || \
> error "writev test failed"
> rwv -f $DIR/$tfile -r -v -n 2 1572864 1048576 || \
> error "readv failed"
> rm -f $DIR/$tfile
> }
> run_test 131a "test iov's crossing stripe boundary for writev/readv"
>
> test_131b() {
> rwv -f $DIR/$tfile -w -a -n 3 524288 1048576 1572864 || \
> error "append writev test failed"
> rwv -f $DIR/$tfile -w -a -n 2 1572864 1048576 || \
> error "append writev test failed"
> rm -f $DIR/$tfile
> }
> run_test 131b "test append writev"
>
> test_131c() {
> rwv -f $DIR/$tfile -w -d -n 1 1048576 || return 0
> error "NOT PASS"
> }
> run_test 131c "test read/write on file w/o objects"
>
> test_131d() {
> rwv -f $DIR/$tfile -w -n 1 1572864
> NOB=`rwv -f $DIR/$tfile -r -n 3 524288 524288 1048576 | awk '/error/
> {print $6}'`
> if [ "$NOB" != 1572864 ]; then
> error "Short read filed: read $NOB bytes instead of 1572864"
> fi
> rm -f $DIR/$tfile
> }
> run_test 131d "test short read"
>
> test_131e() {
> rwv -f $DIR/$tfile -w -s 1048576 -n 1 1048576
> rwv -f $DIR/$tfile -r -z -s 0 -n 1 524288 || \
> error "read hitting hole failed"
> rm -f $DIR/$tfile
> }
> run_test 131e "test read hitting hole"
>
> test_140() { #bug-17379
> mkdir -p $DIR/$tdir || error "Creating dir $DIR/$tdir"
> cd $DIR/$tdir || error "Changing to $DIR/$tdir"
> cp /usr/bin/stat . || error "Copying stat to $DIR/$tdir"
>
> # VFS limits max symlink depth to 8
> local i=0
> while i=`expr $i + 1`; do
> mkdir -p $i || error "Creating dir $i"
> cd $i || error "Changing to $i"
> ln -s ../stat stat || error "Creating stat symlink"
> # Read the symlink until ELOOP present,
> # not LBUGing the system is considered success,
> # we didn't overrun the stack.
> $OPENFILE -f O_RDONLY stat >/dev/null 2>&1; ret=$?
> [ $ret -ne 0 ] && {
> if [ $ret -eq 40 ]; then
> break # -ELOOP
> else
> error "Open stat symlink"
> return
> fi
> }
> done
> i=`expr $i - 1`
> echo "The symlink depth" $i"
> [ $i -eq 8 ] || error "Invalid symlink depth"
> }
> run_test 140 "Check reasonable stack depth (shouldn't LBUG)""
>
> test_154() {
> # do directio so as not to populate the page cache
> log "creating a 10 Mb file"
> multiop $DIR/$tfile oO_CREAT:O_DIRECT:O_RDWR:w$((10*1048576))c ||
> error "multiop failed while creating a file"
> log "starting reads"
> dd if=$DIR/$tfile of=/dev/null bs=4096 &
> log "truncating the file"
> multiop $DIR/$tfile oO_TRUNC:c || error "multiop failed while
> truncating the file"
> log "killing dd"
> kill %+ || true # reads might have finished
> echo "wait until dd is finished"
> wait
> log "removing the temporary file"
> rm -rf $DIR/$tfile || error "tmp file removal failed"
> }
> run_test 154 "parallel read and truncate should not deadlock""
>
> echo "$0: completed"
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Regards & Thanks--
Subrata
On May 23, 2009 16:33 +0530, Subrata Modak wrote:
> On Sat, May 23, 2009 at 3:06 AM, Andreas Dilger <[email protected]> wrote:
>
> > Below are included some of the tests from the Lustre "sanity.sh" script,
> > which tests filesystem behaviour in a variety of ways. Some of them are
> > very simple and might concievably be removed, but are not necessarily bad.
> > I've removed the tests that depend on Lustre-specific behaviour.
> >
> > It probably isn't useful to use this test script directly, since it
> > depends on a number of helper functions, but it is definitely useful
> > as a starting point for adding new tests to xfstests.
> >
> > Unfortunately, a bunch of tests had to be removed since they depend on
> > Lustre's fault-injection code, but they would be useful for testing
> > generic filesystem behaviour (e.g. ENOMEM or ENOSPC handling). There
> > is also a helper program we use "multiop" which is a toolbox program
> > that I could supply separately, if you want.
>
>
> How about understanding these and find out if they can be made part of LTP
> as well ? Any objection(s) ?
Sorry for the late response. No objection to using these tests in LTP.
I've separatel posted the "multiop" program to this list so that you
can better understand what the tests are doing.
Cheers, Andreas
--
Andreas Dilger
Sr. Staff Engineer, Lustre Group
Sun Microsystems of Canada, Inc.
On Sun, 2009-06-21 at 13:19 +0200, Andreas Dilger wrote:
> On May 23, 2009 16:33 +0530, Subrata Modak wrote:
> > On Sat, May 23, 2009 at 3:06 AM, Andreas Dilger <[email protected]> wrote:
> >
> > > Below are included some of the tests from the Lustre "sanity.sh" script,
> > > which tests filesystem behaviour in a variety of ways. Some of them are
> > > very simple and might concievably be removed, but are not necessarily bad.
> > > I've removed the tests that depend on Lustre-specific behaviour.
> > >
> > > It probably isn't useful to use this test script directly, since it
> > > depends on a number of helper functions, but it is definitely useful
> > > as a starting point for adding new tests to xfstests.
> > >
> > > Unfortunately, a bunch of tests had to be removed since they depend on
> > > Lustre's fault-injection code, but they would be useful for testing
> > > generic filesystem behaviour (e.g. ENOMEM or ENOSPC handling). There
> > > is also a helper program we use "multiop" which is a toolbox program
> > > that I could supply separately, if you want.
> >
> >
> > How about understanding these and find out if they can be made part of LTP
> > as well ? Any objection(s) ?
>
> Sorry for the late response. No objection to using these tests in LTP.
Thanks Andreas. When ready we will send you the integration patch for
your review.
Regards--
Subrata
> I've separatel posted the "multiop" program to this list so that you
> can better understand what the tests are doing.
>
> Cheers, Andreas
> --
> Andreas Dilger
> Sr. Staff Engineer, Lustre Group
> Sun Microsystems of Canada, Inc.
>
>
> ------------------------------------------------------------------------------
> Are you an open source citizen? Join us for the Open Source Bridge conference!
> Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
> Need another reason to go? 24-hour hacker lounge. Register today!
> http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org
> _______________________________________________
> Ltp-list mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/ltp-list