2012-07-03 19:10:57

by Lukas Czerner

[permalink] [raw]
Subject: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

With a minor tweaks regarding minimum extent size to discard and
discarded bytes reporting the FITRIM can be enabled on bigalloc file
system and it works without any problem.

This patch fixes minlen handling and discarded bytes reporting to
take into consideration bigalloc enabled file systems and finally
removes the restriction and allow FITRIM to be used on file system with
bigalloc feature enabled.

Signed-off-by: Lukas Czerner <[email protected]>
---
fs/ext4/ioctl.c | 7 -------
fs/ext4/mballoc.c | 5 +++--
2 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index e34deac..9d6e0bc 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -420,13 +420,6 @@ resizefs_out:
if (!blk_queue_discard(q))
return -EOPNOTSUPP;

- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
- ext4_msg(sb, KERN_ERR,
- "FITRIM not supported with bigalloc");
- return -EOPNOTSUPP;
- }
-
if (copy_from_user(&range, (struct fstrim_range __user *)arg,
sizeof(range)))
return -EFAULT;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 1cd6994..c4bd0a6 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4984,7 +4984,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)

start = range->start >> sb->s_blocksize_bits;
end = start + (range->len >> sb->s_blocksize_bits) - 1;
- minlen = range->minlen >> sb->s_blocksize_bits;
+ minlen = EXT4_NUM_B2C(EXT4_SB(sb),
+ range->minlen >> sb->s_blocksize_bits);

if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
unlikely(start >= max_blks))
@@ -5044,6 +5045,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
atomic_set(&EXT4_SB(sb)->s_last_trim_minblks, minlen);

out:
- range->len = trimmed * sb->s_blocksize;
+ range->len = EXT4_C2B(EXT4_SB(sb), trimmed) << sb->s_blocksize_bits;
return ret;
}
--
1.7.7.6



2012-08-21 09:48:33

by Lukas Czerner

[permalink] [raw]
Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

On Tue, 3 Jul 2012, Lukas Czerner wrote:

> Date: Tue, 3 Jul 2012 21:10:42 +0200
> From: Lukas Czerner <[email protected]>
> To: [email protected]
> Cc: [email protected], Lukas Czerner <[email protected]>
> Subject: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
>
> With a minor tweaks regarding minimum extent size to discard and
> discarded bytes reporting the FITRIM can be enabled on bigalloc file
> system and it works without any problem.
>
> This patch fixes minlen handling and discarded bytes reporting to
> take into consideration bigalloc enabled file systems and finally
> removes the restriction and allow FITRIM to be used on file system with
> bigalloc feature enabled.

any comments on this ?

Thanks!
-Lukas
>
> Signed-off-by: Lukas Czerner <[email protected]>
> ---
> fs/ext4/ioctl.c | 7 -------
> fs/ext4/mballoc.c | 5 +++--
> 2 files changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
> index e34deac..9d6e0bc 100644
> --- a/fs/ext4/ioctl.c
> +++ b/fs/ext4/ioctl.c
> @@ -420,13 +420,6 @@ resizefs_out:
> if (!blk_queue_discard(q))
> return -EOPNOTSUPP;
>
> - if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
> - EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
> - ext4_msg(sb, KERN_ERR,
> - "FITRIM not supported with bigalloc");
> - return -EOPNOTSUPP;
> - }
> -
> if (copy_from_user(&range, (struct fstrim_range __user *)arg,
> sizeof(range)))
> return -EFAULT;
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index 1cd6994..c4bd0a6 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -4984,7 +4984,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
>
> start = range->start >> sb->s_blocksize_bits;
> end = start + (range->len >> sb->s_blocksize_bits) - 1;
> - minlen = range->minlen >> sb->s_blocksize_bits;
> + minlen = EXT4_NUM_B2C(EXT4_SB(sb),
> + range->minlen >> sb->s_blocksize_bits);
>
> if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
> unlikely(start >= max_blks))
> @@ -5044,6 +5045,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> atomic_set(&EXT4_SB(sb)->s_last_trim_minblks, minlen);
>
> out:
> - range->len = trimmed * sb->s_blocksize;
> + range->len = EXT4_C2B(EXT4_SB(sb), trimmed) << sb->s_blocksize_bits;
> return ret;
> }
>

2012-09-12 15:31:50

by Lukas Czerner

[permalink] [raw]
Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

On Tue, 21 Aug 2012, Luk?? Czerner wrote:

> Date: Tue, 21 Aug 2012 11:48:27 +0200 (CEST)
> From: Luk?? Czerner <[email protected]>
> To: Lukas Czerner <[email protected]>
> Cc: [email protected], [email protected]
> Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
>
> On Tue, 3 Jul 2012, Lukas Czerner wrote:
>
> > Date: Tue, 3 Jul 2012 21:10:42 +0200
> > From: Lukas Czerner <[email protected]>
> > To: [email protected]
> > Cc: [email protected], Lukas Czerner <[email protected]>
> > Subject: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
> >
> > With a minor tweaks regarding minimum extent size to discard and
> > discarded bytes reporting the FITRIM can be enabled on bigalloc file
> > system and it works without any problem.
> >
> > This patch fixes minlen handling and discarded bytes reporting to
> > take into consideration bigalloc enabled file systems and finally
> > removes the restriction and allow FITRIM to be used on file system with
> > bigalloc feature enabled.
>
> any comments on this ?
>
> Thanks!
> -Lukas

ping^2

> >
> > Signed-off-by: Lukas Czerner <[email protected]>
> > ---
> > fs/ext4/ioctl.c | 7 -------
> > fs/ext4/mballoc.c | 5 +++--
> > 2 files changed, 3 insertions(+), 9 deletions(-)
> >
> > diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
> > index e34deac..9d6e0bc 100644
> > --- a/fs/ext4/ioctl.c
> > +++ b/fs/ext4/ioctl.c
> > @@ -420,13 +420,6 @@ resizefs_out:
> > if (!blk_queue_discard(q))
> > return -EOPNOTSUPP;
> >
> > - if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
> > - EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
> > - ext4_msg(sb, KERN_ERR,
> > - "FITRIM not supported with bigalloc");
> > - return -EOPNOTSUPP;
> > - }
> > -
> > if (copy_from_user(&range, (struct fstrim_range __user *)arg,
> > sizeof(range)))
> > return -EFAULT;
> > diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> > index 1cd6994..c4bd0a6 100644
> > --- a/fs/ext4/mballoc.c
> > +++ b/fs/ext4/mballoc.c
> > @@ -4984,7 +4984,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> >
> > start = range->start >> sb->s_blocksize_bits;
> > end = start + (range->len >> sb->s_blocksize_bits) - 1;
> > - minlen = range->minlen >> sb->s_blocksize_bits;
> > + minlen = EXT4_NUM_B2C(EXT4_SB(sb),
> > + range->minlen >> sb->s_blocksize_bits);
> >
> > if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
> > unlikely(start >= max_blks))
> > @@ -5044,6 +5045,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> > atomic_set(&EXT4_SB(sb)->s_last_trim_minblks, minlen);
> >
> > out:
> > - range->len = trimmed * sb->s_blocksize;
> > + range->len = EXT4_C2B(EXT4_SB(sb), trimmed) << sb->s_blocksize_bits;
> > return ret;
> > }
> >
>

2012-09-12 16:59:08

by Carlos Maiolino

[permalink] [raw]
Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

On Tue, Jul 03, 2012 at 09:10:42PM +0200, Lukas Czerner wrote:
> With a minor tweaks regarding minimum extent size to discard and
> discarded bytes reporting the FITRIM can be enabled on bigalloc file
> system and it works without any problem.
>
> This patch fixes minlen handling and discarded bytes reporting to
> take into consideration bigalloc enabled file systems and finally
> removes the restriction and allow FITRIM to be used on file system with
> bigalloc feature enabled.
>
> Signed-off-by: Lukas Czerner <[email protected]>
> ---
> fs/ext4/ioctl.c | 7 -------
> fs/ext4/mballoc.c | 5 +++--
> 2 files changed, 3 insertions(+), 9 deletions(-)
>
> diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
> index e34deac..9d6e0bc 100644
> --- a/fs/ext4/ioctl.c
> +++ b/fs/ext4/ioctl.c
> @@ -420,13 +420,6 @@ resizefs_out:
> if (!blk_queue_discard(q))
> return -EOPNOTSUPP;
>
> - if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
> - EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
> - ext4_msg(sb, KERN_ERR,
> - "FITRIM not supported with bigalloc");
> - return -EOPNOTSUPP;
> - }
> -
> if (copy_from_user(&range, (struct fstrim_range __user *)arg,
> sizeof(range)))
> return -EFAULT;
> diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> index 1cd6994..c4bd0a6 100644
> --- a/fs/ext4/mballoc.c
> +++ b/fs/ext4/mballoc.c
> @@ -4984,7 +4984,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
>
> start = range->start >> sb->s_blocksize_bits;
> end = start + (range->len >> sb->s_blocksize_bits) - 1;
> - minlen = range->minlen >> sb->s_blocksize_bits;
> + minlen = EXT4_NUM_B2C(EXT4_SB(sb),
> + range->minlen >> sb->s_blocksize_bits);
>
> if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
> unlikely(start >= max_blks))
> @@ -5044,6 +5045,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> atomic_set(&EXT4_SB(sb)->s_last_trim_minblks, minlen);
>
> out:
> - range->len = trimmed * sb->s_blocksize;
> + range->len = EXT4_C2B(EXT4_SB(sb), trimmed) << sb->s_blocksize_bits;
> return ret;
> }

Looks good to me,

Reviewed-by: Carlos Maiolino <[email protected]>
--
--Carlos

2012-09-26 19:46:19

by Lukas Czerner

[permalink] [raw]
Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

On Wed, 12 Sep 2012, Luk?? Czerner wrote:

> Date: Wed, 12 Sep 2012 11:31:46 -0400 (EDT)
> From: Luk?? Czerner <[email protected]>
> To: Luk?? Czerner <[email protected]>
> Cc: [email protected], [email protected]
> Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
>
> On Tue, 21 Aug 2012, Luk?? Czerner wrote:
>
> > Date: Tue, 21 Aug 2012 11:48:27 +0200 (CEST)
> > From: Luk?? Czerner <[email protected]>
> > To: Lukas Czerner <[email protected]>
> > Cc: [email protected], [email protected]
> > Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
> >
> > On Tue, 3 Jul 2012, Lukas Czerner wrote:
> >
> > > Date: Tue, 3 Jul 2012 21:10:42 +0200
> > > From: Lukas Czerner <[email protected]>
> > > To: [email protected]
> > > Cc: [email protected], Lukas Czerner <[email protected]>
> > > Subject: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system
> > >
> > > With a minor tweaks regarding minimum extent size to discard and
> > > discarded bytes reporting the FITRIM can be enabled on bigalloc file
> > > system and it works without any problem.
> > >
> > > This patch fixes minlen handling and discarded bytes reporting to
> > > take into consideration bigalloc enabled file systems and finally
> > > removes the restriction and allow FITRIM to be used on file system with
> > > bigalloc feature enabled.
> >
> > any comments on this ?
> >
> > Thanks!
> > -Lukas
>
> ping^2

ping^3

>
> > >
> > > Signed-off-by: Lukas Czerner <[email protected]>
> > > ---
> > > fs/ext4/ioctl.c | 7 -------
> > > fs/ext4/mballoc.c | 5 +++--
> > > 2 files changed, 3 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
> > > index e34deac..9d6e0bc 100644
> > > --- a/fs/ext4/ioctl.c
> > > +++ b/fs/ext4/ioctl.c
> > > @@ -420,13 +420,6 @@ resizefs_out:
> > > if (!blk_queue_discard(q))
> > > return -EOPNOTSUPP;
> > >
> > > - if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
> > > - EXT4_FEATURE_RO_COMPAT_BIGALLOC)) {
> > > - ext4_msg(sb, KERN_ERR,
> > > - "FITRIM not supported with bigalloc");
> > > - return -EOPNOTSUPP;
> > > - }
> > > -
> > > if (copy_from_user(&range, (struct fstrim_range __user *)arg,
> > > sizeof(range)))
> > > return -EFAULT;
> > > diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
> > > index 1cd6994..c4bd0a6 100644
> > > --- a/fs/ext4/mballoc.c
> > > +++ b/fs/ext4/mballoc.c
> > > @@ -4984,7 +4984,8 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> > >
> > > start = range->start >> sb->s_blocksize_bits;
> > > end = start + (range->len >> sb->s_blocksize_bits) - 1;
> > > - minlen = range->minlen >> sb->s_blocksize_bits;
> > > + minlen = EXT4_NUM_B2C(EXT4_SB(sb),
> > > + range->minlen >> sb->s_blocksize_bits);
> > >
> > > if (unlikely(minlen > EXT4_CLUSTERS_PER_GROUP(sb)) ||
> > > unlikely(start >= max_blks))
> > > @@ -5044,6 +5045,6 @@ int ext4_trim_fs(struct super_block *sb, struct fstrim_range *range)
> > > atomic_set(&EXT4_SB(sb)->s_last_trim_minblks, minlen);
> > >
> > > out:
> > > - range->len = trimmed * sb->s_blocksize;
> > > + range->len = EXT4_C2B(EXT4_SB(sb), trimmed) << sb->s_blocksize_bits;
> > > return ret;
> > > }
> > >
> >

2012-09-27 02:28:14

by Theodore Ts'o

[permalink] [raw]
Subject: Re: [PATCH] ext4: enable FITRIM ioctl on bigalloc file system

On Tue, Jul 03, 2012 at 09:10:42PM +0200, Lukas Czerner wrote:
> With a minor tweaks regarding minimum extent size to discard and
> discarded bytes reporting the FITRIM can be enabled on bigalloc file
> system and it works without any problem.
>
> This patch fixes minlen handling and discarded bytes reporting to
> take into consideration bigalloc enabled file systems and finally
> removes the restriction and allow FITRIM to be used on file system with
> bigalloc feature enabled.
>
> Signed-off-by: Lukas Czerner <[email protected]>

Applied, thanks!

- Ted