Adds ioctl interface support for ext4 project
This patch adds ioctl interface for setting/getting project of ext4.
Signed-off-by: Li Xi <lixi <at> ddn.com>
---
Index: linux.git/fs/ext4/ext4.h
===================================================================
--- linux.git.orig/fs/ext4/ext4.h
+++ linux.git/fs/ext4/ext4.h
@@ -617,6 +617,8 @@ enum {
#define EXT4_IOC_RESIZE_FS _IOW('f', 16, __u64)
#define EXT4_IOC_SWAP_BOOT _IO('f', 17)
#define EXT4_IOC_PRECACHE_EXTENTS _IO('f', 18)
+#define EXT4_IOC_GETPROJECT _IOR('f', 19, long)
+#define EXT4_IOC_SETPROJECT _IOW('f', 20, long)
#if defined(__KERNEL__) && defined(CONFIG_COMPAT)
/*
Index: linux.git/Documentation/filesystems/ext4.txt
===================================================================
--- linux.git.orig/Documentation/filesystems/ext4.txt
+++ linux.git/Documentation/filesystems/ext4.txt
@@ -609,6 +609,10 @@ EXT4_IOC_SWAP_BOOT Swap i_blocks a
The data blocks of the previous boot loader
will be associated with the given inode.
+ EXT4_IOC_GETPROJECT Get project ID associated with inode.
+
+ EXT4_IOC_SETPROJECT Set Project ID associated with inode.
+
..............................................................................
References
Index: linux.git/fs/ext4/ioctl.c
===================================================================
--- linux.git.orig/fs/ext4/ioctl.c
+++ linux.git/fs/ext4/ioctl.c
@@ -14,6 +14,8 @@
#include <linux/compat.h>
#include <linux/mount.h>
#include <linux/file.h>
+#include <linux/quotaops.h>
+#include <linux/quota.h>
#include <asm/uaccess.h>
#include "ext4_jbd2.h"
#include "ext4.h"
@@ -611,6 +613,104 @@ resizefs_out:
case EXT4_IOC_PRECACHE_EXTENTS:
return ext4_ext_precache(inode);
+ case EXT4_IOC_GETPROJECT:
+ {
+#ifdef CONFIG_QUOTA_PROJECT
+ __u32 projid;
+
+ if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_PROJECT)) {
+ ext4_msg(sb, KERN_ERR,
+ "get project not supported without "
+ "project feature");
+ return -ENOTSUPP;
+ }
+
+ projid = (__u32)from_kprojid(&init_user_ns,
+ EXT4_I(inode)->i_projid);
+ return put_user(projid, (__u32 __user *) arg);
+#else
+ ext4_msg(sb, KERN_ERR,
+ "get project not supported without "
+ "CONFIG_QUOTA_PROJECT");
+ return -ENOTSUPP;
+#endif
+ }
+ case EXT4_IOC_SETPROJECT:
+ {
+#ifdef CONFIG_QUOTA_PROJECT
+ __u32 projid;
+ int err;
+ handle_t *handle;
+ kprojid_t kprojid;
+
+ struct dquot *transfer_to[MAXQUOTAS] = { };
+
+ if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_PROJECT)) {
+ ext4_msg(sb, KERN_ERR,
+ "set project not supported without "
+ "project feature");
+ return -ENOTSUPP;
+ }
+
+ /* Make sure caller can change project. */
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ if (get_user(projid, (__u32 __user *) arg))
+ return -EFAULT;
+
+ kprojid = make_kprojid(&init_user_ns, (projid_t)projid);
+
+ if (projid_eq(kprojid, EXT4_I(inode)->i_projid))
+ return 0;
+
+ err = mnt_want_write_file(filp);
+ if (err)
+ return err;
+
+ err = -EPERM;
+ mutex_lock(&inode->i_mutex);
+ /* Is it quota file? Do not allow user to mess with it */
+ if (IS_NOQUOTA(inode))
+ goto project_out;
+
+ dquot_initialize(inode);
+
+ handle = ext4_journal_start(inode, EXT4_HT_QUOTA,
+ EXT4_QUOTA_INIT_BLOCKS(sb) +
+ EXT4_QUOTA_DEL_BLOCKS(sb) + 3);
+ if (IS_ERR(handle)) {
+ err = PTR_ERR(handle);
+ goto project_out;
+ }
+
+ transfer_to[PRJQUOTA] = dqget(sb, make_kqid_projid(kprojid));
+ if (!transfer_to[PRJQUOTA]) {
+ err = -ESRCH;
+ goto project_stop;
+ }
+ err = __dquot_transfer(inode, transfer_to);
+ dqput(transfer_to[PRJQUOTA]);
+ if (err)
+ goto project_stop;
+
+ EXT4_I(inode)->i_projid = kprojid;
+ err = ext4_mark_inode_dirty(handle, inode);
+project_stop:
+ ext4_journal_stop(handle);
+project_out:
+ mutex_unlock(&inode->i_mutex);
+ mnt_drop_write_file(filp);
+ return err;
+#else
+ ext4_msg(sb, KERN_ERR,
+ "set project not supported without "
+ "CONFIG_QUOTA_PROJECT");
+ return -ENOTSUPP;
+#endif
+ }
default:
return -ENOTTY;
}
On Wed 10-09-14 11:54:54, Li Xi wrote:
> Adds ioctl interface support for ext4 project
>
> This patch adds ioctl interface for setting/getting project of ext4.
>
> Signed-off-by: Li Xi <lixi <at> ddn.com>
Please CC [email protected] for this patch so that people caring
about kernel API know about the change.
...
> ---
> Index: linux.git/fs/ext4/ioctl.c
> ===================================================================
> --- linux.git.orig/fs/ext4/ioctl.c
> +++ linux.git/fs/ext4/ioctl.c
> @@ -14,6 +14,8 @@
> #include <linux/compat.h>
> #include <linux/mount.h>
> #include <linux/file.h>
> +#include <linux/quotaops.h>
> +#include <linux/quota.h>
> #include <asm/uaccess.h>
> #include "ext4_jbd2.h"
> #include "ext4.h"
> @@ -611,6 +613,104 @@ resizefs_out:
> case EXT4_IOC_PRECACHE_EXTENTS:
> return ext4_ext_precache(inode);
>
> + case EXT4_IOC_GETPROJECT:
> + {
> +#ifdef CONFIG_QUOTA_PROJECT
> + __u32 projid;
> +
> + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
> + EXT4_FEATURE_RO_COMPAT_PROJECT)) {
> + ext4_msg(sb, KERN_ERR,
> + "get project not supported without "
> + "project feature");
Please no messages into kernel log for failed ioctl(). Userspace could
easily flood logs with them.
> + return -ENOTSUPP;
This should be -EOPNOTSUPP I think.
> + }
> +
> + projid = (__u32)from_kprojid(&init_user_ns,
> + EXT4_I(inode)->i_projid);
> + return put_user(projid, (__u32 __user *) arg);
> +#else
> + ext4_msg(sb, KERN_ERR,
> + "get project not supported without "
> + "CONFIG_QUOTA_PROJECT");
> + return -ENOTSUPP;
> +#endif
> + }
> + case EXT4_IOC_SETPROJECT:
> + {
> +#ifdef CONFIG_QUOTA_PROJECT
> + __u32 projid;
> + int err;
> + handle_t *handle;
> + kprojid_t kprojid;
> +
> + struct dquot *transfer_to[MAXQUOTAS] = { };
> +
> + if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
> + EXT4_FEATURE_RO_COMPAT_PROJECT)) {
> + ext4_msg(sb, KERN_ERR,
> + "set project not supported without "
> + "project feature");
> + return -ENOTSUPP;
Same comments as for GETPROJECT apply here...
> + }
> +
> + /* Make sure caller can change project. */
> + if (!capable(CAP_SYS_ADMIN))
> + return -EACCES;
> +
> + if (get_user(projid, (__u32 __user *) arg))
> + return -EFAULT;
> +
> + kprojid = make_kprojid(&init_user_ns, (projid_t)projid);
> +
> + if (projid_eq(kprojid, EXT4_I(inode)->i_projid))
> + return 0;
> +
You should check whether project id fits into an inode here...
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR