Changes since v1:
- Patch 1: add comments to explain why and how to update i_disksize in
ext4_da_write_end().
- Patch 3: update i_disksize only if copied is not zero and drop
i_size_changed parameter, also drop unused EXT4_STATE_JDATA
and i_datasync_tid update code hook.
Thanks,
Yi.
--------
Original description:
This patchset address to improve buffer write performance with delalloc.
The first patch reduce the unnecessary update i_disksize, the second two
patch refactor the inline data write procedure and also do some small
fix, the last patch do improve by remove all unnecessary journal handle
in the delalloc write procedure.
After this patch set, we could get a lot of performance improvement.
Below is the Unixbench comparison data test on my machine with 'Intel
Xeon Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch set:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
========
System Benchmarks Index Score (Partial Only) 1186.6
After this patch set:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
========
System Benchmarks Index Score (Partial Only) 2053.0
Zhang Yi (4):
ext4: check and update i_disksize properly
ext4: correct the error path of ext4_write_inline_data_end()
ext4: factor out write end code of inline file
ext4: drop unnecessary journal handle in delalloc write
fs/ext4/ext4.h | 3 -
fs/ext4/inline.c | 120 ++++++++++++++++++-------------------
fs/ext4/inode.c | 150 ++++++++++++-----------------------------------
3 files changed, 99 insertions(+), 174 deletions(-)
--
2.31.1
After we factor out the inline data write procedure from
ext4_da_write_end(), we don't need to start journal handle for the cases
of both buffer overwrite and append-write. If we need to update
i_disksize, mark_inode_dirty() do start handle and update inode buffer.
So we could just remove all the journal handle codes in the delalloc
write procedure.
After this patch, we could get a lot of performance improvement. Below
is the Unixbench comparison data test on my machine with 'Intel Xeon
Gold 5120' CPU and nvme SSD backend.
Test cmd:
./Run -c 56 -i 3 fstime fsbuffer fsdisk
Before this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 422965.0 1068.1
File Copy 256 bufsize 500 maxblocks 1655.0 105077.0 634.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 1429092.0 2464.0
======
System Benchmarks Index Score (Partial Only) 1186.6
After this patch:
System Benchmarks Partial Index BASELINE RESULT INDEX
File Copy 1024 bufsize 2000 maxblocks 3960.0 732716.0 1850.3
File Copy 256 bufsize 500 maxblocks 1655.0 184940.0 1117.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 2427152.0 4184.7
======
System Benchmarks Index Score (Partial Only) 2053.0
Signed-off-by: Zhang Yi <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
---
fs/ext4/inode.c | 60 +++++--------------------------------------------
1 file changed, 5 insertions(+), 55 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 9324353fdb7b..b265bed07b67 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2910,19 +2910,6 @@ static int ext4_nonda_switch(struct super_block *sb)
return 0;
}
-/* We always reserve for an inode update; the superblock could be there too */
-static int ext4_da_write_credits(struct inode *inode, loff_t pos, unsigned len)
-{
- if (likely(ext4_has_feature_large_file(inode->i_sb)))
- return 1;
-
- if (pos + len <= 0x7fffffffULL)
- return 1;
-
- /* We might need to update the superblock to set LARGE_FILE */
- return 2;
-}
-
static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
@@ -2931,7 +2918,6 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
struct page *page;
pgoff_t index;
struct inode *inode = mapping->host;
- handle_t *handle;
if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb))))
return -EIO;
@@ -2957,41 +2943,11 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
return 0;
}
- /*
- * grab_cache_page_write_begin() can take a long time if the
- * system is thrashing due to memory pressure, or if the page
- * is being written back. So grab it first before we start
- * the transaction handle. This also allows us to allocate
- * the page (if needed) without using GFP_NOFS.
- */
-retry_grab:
+retry:
page = grab_cache_page_write_begin(mapping, index, flags);
if (!page)
return -ENOMEM;
- unlock_page(page);
-
- /*
- * With delayed allocation, we don't log the i_disksize update
- * if there is delayed block allocation. But we still need
- * to journalling the i_disksize update if writes to the end
- * of file which has an already mapped buffer.
- */
-retry_journal:
- handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE,
- ext4_da_write_credits(inode, pos, len));
- if (IS_ERR(handle)) {
- put_page(page);
- return PTR_ERR(handle);
- }
- lock_page(page);
- if (page->mapping != mapping) {
- /* The page got truncated from under us */
- unlock_page(page);
- put_page(page);
- ext4_journal_stop(handle);
- goto retry_grab;
- }
/* In case writeback began while the page was unlocked */
wait_for_stable_page(page);
@@ -3003,20 +2959,18 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
#endif
if (ret < 0) {
unlock_page(page);
- ext4_journal_stop(handle);
+ put_page(page);
/*
* block_write_begin may have instantiated a few blocks
* outside i_size. Trim these off again. Don't need
- * i_size_read because we hold i_mutex.
+ * i_size_read because we hold inode lock.
*/
if (pos + len > inode->i_size)
ext4_truncate_failed_write(inode);
if (ret == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries))
- goto retry_journal;
-
- put_page(page);
+ goto retry;
return ret;
}
@@ -3053,8 +3007,6 @@ static int ext4_da_write_end(struct file *file,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
- int ret;
- handle_t *handle = ext4_journal_current_handle();
loff_t new_i_size;
unsigned long start, end;
int write_mode = (int)(unsigned long)fsdata;
@@ -3093,9 +3045,7 @@ static int ext4_da_write_end(struct file *file,
ext4_da_should_update_i_disksize(page, end))
ext4_update_i_disksize(inode, new_i_size);
- copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
- ret = ext4_journal_stop(handle);
- return ret ? ret : copied;
+ return generic_write_end(file, mapping, pos, len, copied, page, fsdata);
}
/*
--
2.31.1
Now that the inline_data file write end procedure are falled into the
common write end functions, it is not clear. Factor them out and do
some cleanup. This patch also drop ext4_da_write_inline_data_end()
and switch to use ext4_write_inline_data_end() instead because we also
need to do the same error processing if we failed to write data into
inline entry.
Signed-off-by: Zhang Yi <[email protected]>
---
fs/ext4/ext4.h | 3 --
fs/ext4/inline.c | 117 ++++++++++++++++++++++++-----------------------
fs/ext4/inode.c | 73 ++++++++++-------------------
3 files changed, 84 insertions(+), 109 deletions(-)
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 3c51e243450d..d4799e619048 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -3530,9 +3530,6 @@ extern int ext4_da_write_inline_data_begin(struct address_space *mapping,
unsigned flags,
struct page **pagep,
void **fsdata);
-extern int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos,
- unsigned len, unsigned copied,
- struct page *page);
extern int ext4_try_add_inline_entry(handle_t *handle,
struct ext4_filename *fname,
struct inode *dir, struct inode *inode);
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 28b666f25ac2..3d227b32b21c 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -729,34 +729,76 @@ int ext4_try_to_write_inline_data(struct address_space *mapping,
int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
unsigned copied, struct page *page)
{
- int ret, no_expand;
+ handle_t *handle = ext4_journal_current_handle();
+ int no_expand;
void *kaddr;
struct ext4_iloc iloc;
+ int ret = 0, ret2;
if (unlikely(copied < len) && !PageUptodate(page))
- return 0;
+ copied = 0;
- ret = ext4_get_inode_loc(inode, &iloc);
- if (ret) {
- ext4_std_error(inode->i_sb, ret);
- return ret;
- }
+ if (likely(copied)) {
+ ret = ext4_get_inode_loc(inode, &iloc);
+ if (ret) {
+ unlock_page(page);
+ put_page(page);
+ ext4_std_error(inode->i_sb, ret);
+ goto out;
+ }
+ ext4_write_lock_xattr(inode, &no_expand);
+ BUG_ON(!ext4_has_inline_data(inode));
- ext4_write_lock_xattr(inode, &no_expand);
- BUG_ON(!ext4_has_inline_data(inode));
+ kaddr = kmap_atomic(page);
+ ext4_write_inline_data(inode, &iloc, kaddr, pos, copied);
+ kunmap_atomic(kaddr);
+ SetPageUptodate(page);
+ /* clear page dirty so that writepages wouldn't work for us. */
+ ClearPageDirty(page);
- kaddr = kmap_atomic(page);
- ext4_write_inline_data(inode, &iloc, kaddr, pos, copied);
- kunmap_atomic(kaddr);
- SetPageUptodate(page);
- /* clear page dirty so that writepages wouldn't work for us. */
- ClearPageDirty(page);
+ ext4_write_unlock_xattr(inode, &no_expand);
+ brelse(iloc.bh);
- ext4_write_unlock_xattr(inode, &no_expand);
- brelse(iloc.bh);
- mark_inode_dirty(inode);
+ /*
+ * It's important to update i_size while still holding page
+ * lock: page writeout could otherwise come in and zero
+ * beyond i_size.
+ */
+ ext4_update_inode_size(inode, pos + copied);
+ }
+ unlock_page(page);
+ put_page(page);
+
+ /*
+ * Don't mark the inode dirty under page lock. First, it unnecessarily
+ * makes the holding time of page lock longer. Second, it forces lock
+ * ordering of page lock and transaction start for journaling
+ * filesystems.
+ */
+ if (likely(copied))
+ mark_inode_dirty(inode);
+out:
+ /*
+ * If we have allocated more blocks and copied less. We will have
+ * blocks allocated outside inode->i_size, so truncate them.
+ */
+ if (pos + len > inode->i_size && ext4_can_truncate(inode))
+ ext4_orphan_add(handle, inode);
- return copied;
+ ret2 = ext4_journal_stop(handle);
+ if (!ret)
+ ret = ret2;
+ if (pos + len > inode->i_size) {
+ ext4_truncate_failed_write(inode);
+ /*
+ * If truncate failed early the inode might still be
+ * on the orphan list; we need to make sure the inode
+ * is removed from the orphan list in that case.
+ */
+ if (inode->i_nlink)
+ ext4_orphan_del(NULL, inode);
+ }
+ return ret ? ret : copied;
}
struct buffer_head *
@@ -937,43 +979,6 @@ int ext4_da_write_inline_data_begin(struct address_space *mapping,
return ret;
}
-int ext4_da_write_inline_data_end(struct inode *inode, loff_t pos,
- unsigned len, unsigned copied,
- struct page *page)
-{
- int ret;
-
- ret = ext4_write_inline_data_end(inode, pos, len, copied, page);
- if (ret < 0) {
- unlock_page(page);
- put_page(page);
- return ret;
- }
- copied = ret;
-
- /*
- * No need to use i_size_read() here, the i_size
- * cannot change under us because we hold i_mutex.
- *
- * But it's important to update i_size while still holding page lock:
- * page writeout could otherwise come in and zero beyond i_size.
- */
- if (pos+copied > inode->i_size)
- i_size_write(inode, pos+copied);
- unlock_page(page);
- put_page(page);
-
- /*
- * Don't mark the inode dirty under page lock. First, it unnecessarily
- * makes the holding time of page lock longer. Second, it forces lock
- * ordering of page lock and transaction start for journaling
- * filesystems.
- */
- mark_inode_dirty(inode);
-
- return copied;
-}
-
#ifdef INLINE_DIR_DEBUG
void ext4_show_inline_dir(struct inode *dir, struct buffer_head *bh,
void *inline_start, int inline_size)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 5bbf9f3b8b6f..9324353fdb7b 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1282,23 +1282,14 @@ static int ext4_write_end(struct file *file,
loff_t old_size = inode->i_size;
int ret = 0, ret2;
int i_size_changed = 0;
- int inline_data = ext4_has_inline_data(inode);
bool verity = ext4_verity_in_progress(inode);
trace_ext4_write_end(inode, pos, len, copied);
- if (inline_data) {
- ret = ext4_write_inline_data_end(inode, pos, len,
- copied, page);
- if (ret < 0) {
- unlock_page(page);
- put_page(page);
- goto errout;
- }
- copied = ret;
- ret = 0;
- } else
- copied = block_write_end(file, mapping, pos,
- len, copied, page, fsdata);
+
+ if (ext4_has_inline_data(inode))
+ return ext4_write_inline_data_end(inode, pos, len, copied, page);
+
+ copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
/*
* it's important to update i_size while still holding page lock:
* page writeout could otherwise come in and zero beyond i_size.
@@ -1319,10 +1310,9 @@ static int ext4_write_end(struct file *file,
* ordering of page lock and transaction start for journaling
* filesystems.
*/
- if (i_size_changed || inline_data)
+ if (i_size_changed)
ret = ext4_mark_inode_dirty(handle, inode);
-errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
@@ -1394,7 +1384,6 @@ static int ext4_journalled_write_end(struct file *file,
int partial = 0;
unsigned from, to;
int size_changed = 0;
- int inline_data = ext4_has_inline_data(inode);
bool verity = ext4_verity_in_progress(inode);
trace_ext4_journalled_write_end(inode, pos, len, copied);
@@ -1403,17 +1392,10 @@ static int ext4_journalled_write_end(struct file *file,
BUG_ON(!ext4_handle_valid(handle));
- if (inline_data) {
- ret = ext4_write_inline_data_end(inode, pos, len,
- copied, page);
- if (ret < 0) {
- unlock_page(page);
- put_page(page);
- goto errout;
- }
- copied = ret;
- ret = 0;
- } else if (unlikely(copied < len) && !PageUptodate(page)) {
+ if (ext4_has_inline_data(inode))
+ return ext4_write_inline_data_end(inode, pos, len, copied, page);
+
+ if (unlikely(copied < len) && !PageUptodate(page)) {
copied = 0;
ext4_journalled_zero_new_buffers(handle, page, from, to);
} else {
@@ -1436,13 +1418,12 @@ static int ext4_journalled_write_end(struct file *file,
if (old_size < pos && !verity)
pagecache_isize_extended(inode, old_size, pos);
- if (size_changed || inline_data) {
+ if (size_changed) {
ret2 = ext4_mark_inode_dirty(handle, inode);
if (!ret)
ret = ret2;
}
-errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
@@ -3072,7 +3053,7 @@ static int ext4_da_write_end(struct file *file,
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
- int ret = 0, ret2;
+ int ret;
handle_t *handle = ext4_journal_current_handle();
loff_t new_i_size;
unsigned long start, end;
@@ -3083,6 +3064,12 @@ static int ext4_da_write_end(struct file *file,
len, copied, page, fsdata);
trace_ext4_da_write_end(inode, pos, len, copied);
+
+ if (write_mode != CONVERT_INLINE_DATA &&
+ ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) &&
+ ext4_has_inline_data(inode))
+ return ext4_write_inline_data_end(inode, pos, len, copied, page);
+
start = pos & (PAGE_SIZE - 1);
end = start + copied - 1;
@@ -3102,26 +3089,12 @@ static int ext4_da_write_end(struct file *file,
* ext4_da_write_inline_data_end().
*/
new_i_size = pos + copied;
- if (copied && new_i_size > inode->i_size) {
- if (ext4_has_inline_data(inode) ||
- ext4_da_should_update_i_disksize(page, end))
- ext4_update_i_disksize(inode, new_i_size);
- }
-
- if (write_mode != CONVERT_INLINE_DATA &&
- ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) &&
- ext4_has_inline_data(inode))
- ret = ext4_da_write_inline_data_end(inode, pos, len, copied,
- page);
- else
- ret = generic_write_end(file, mapping, pos, len, copied,
- page, fsdata);
-
- copied = ret;
- ret2 = ext4_journal_stop(handle);
- if (unlikely(ret2 && !ret))
- ret = ret2;
+ if (copied && new_i_size > inode->i_size &&
+ ext4_da_should_update_i_disksize(page, end))
+ ext4_update_i_disksize(inode, new_i_size);
+ copied = generic_write_end(file, mapping, pos, len, copied, page, fsdata);
+ ret = ext4_journal_stop(handle);
return ret ? ret : copied;
}
--
2.31.1
After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <=
isize"), i_disksize could always be updated to i_size in ext4_setattr(),
and we could sure that i_disksize <= i_size since holding inode lock and
if i_disksize < i_size there are delalloc writes pending in the range
upto i_size. If the end of the current write is <= i_size, there's no
need to touch i_disksize since writeback will push i_disksize upto
i_size eventually. So we can switch to check i_size instead of
i_disksize in ext4_da_write_end() when write to the end of the file.
we also could remove ext4_mark_inode_dirty() together because we defer
inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
Signed-off-by: Zhang Yi <[email protected]>
---
fs/ext4/inode.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d8de607849df..dca8e3810443 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3084,35 +3084,37 @@ static int ext4_da_write_end(struct file *file,
end = start + copied - 1;
/*
- * generic_write_end() will run mark_inode_dirty() if i_size
- * changes. So let's piggyback the i_disksize mark_inode_dirty
- * into that.
+ * Since we are holding inode lock, we are sure i_disksize <=
+ * i_size. We also know that if i_disksize < i_size, there are
+ * delalloc writes pending in the range upto i_size. If the end of
+ * the current write is <= i_size, there's no need to touch
+ * i_disksize since writeback will push i_disksize upto i_size
+ * eventually. If the end of the current write is > i_size and
+ * inside an allocated block (ext4_da_should_update_i_disksize()
+ * check), we need to update i_disksize here as neither
+ * ext4_writepage() nor certain ext4_writepages() paths not
+ * allocating blocks update i_disksize.
+ *
+ * Note that we defer inode dirtying to generic_write_end() /
+ * ext4_da_write_inline_data_end().
*/
new_i_size = pos + copied;
- if (copied && new_i_size > EXT4_I(inode)->i_disksize) {
+ if (copied && new_i_size > inode->i_size) {
if (ext4_has_inline_data(inode) ||
- ext4_da_should_update_i_disksize(page, end)) {
+ ext4_da_should_update_i_disksize(page, end))
ext4_update_i_disksize(inode, new_i_size);
- /* We need to mark inode dirty even if
- * new_i_size is less that inode->i_size
- * bu greater than i_disksize.(hint delalloc)
- */
- ret = ext4_mark_inode_dirty(handle, inode);
- }
}
if (write_mode != CONVERT_INLINE_DATA &&
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) &&
ext4_has_inline_data(inode))
- ret2 = ext4_da_write_inline_data_end(inode, pos, len, copied,
+ ret = ext4_da_write_inline_data_end(inode, pos, len, copied,
page);
else
- ret2 = generic_write_end(file, mapping, pos, len, copied,
+ ret = generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
- copied = ret2;
- if (ret2 < 0)
- ret = ret2;
+ copied = ret;
ret2 = ext4_journal_stop(handle);
if (unlikely(ret2 && !ret))
ret = ret2;
--
2.31.1
Current error path of ext4_write_inline_data_end() is not correct.
Firstly, it should pass out the error value if ext4_get_inode_loc()
return fail, or else it could trigger infinite loop if we inject error
here. And then it's better to add inode to orphan list if it return fail
in ext4_journal_stop(), otherwise we could not restore inline xattr
entry after power failure. Finally, we need to reset the 'ret' value if
ext4_write_inline_data_end() return success in ext4_write_end() and
ext4_journalled_write_end(), otherwise we could not get the error return
value of ext4_journal_stop().
Signed-off-by: Zhang Yi <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
---
fs/ext4/inline.c | 15 +++++----------
fs/ext4/inode.c | 7 +++++--
2 files changed, 10 insertions(+), 12 deletions(-)
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 70cb64db33f7..28b666f25ac2 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -733,25 +733,20 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
void *kaddr;
struct ext4_iloc iloc;
- if (unlikely(copied < len)) {
- if (!PageUptodate(page)) {
- copied = 0;
- goto out;
- }
- }
+ if (unlikely(copied < len) && !PageUptodate(page))
+ return 0;
ret = ext4_get_inode_loc(inode, &iloc);
if (ret) {
ext4_std_error(inode->i_sb, ret);
- copied = 0;
- goto out;
+ return ret;
}
ext4_write_lock_xattr(inode, &no_expand);
BUG_ON(!ext4_has_inline_data(inode));
kaddr = kmap_atomic(page);
- ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
+ ext4_write_inline_data(inode, &iloc, kaddr, pos, copied);
kunmap_atomic(kaddr);
SetPageUptodate(page);
/* clear page dirty so that writepages wouldn't work for us. */
@@ -760,7 +755,7 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
ext4_write_unlock_xattr(inode, &no_expand);
brelse(iloc.bh);
mark_inode_dirty(inode);
-out:
+
return copied;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index dca8e3810443..5bbf9f3b8b6f 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1295,6 +1295,7 @@ static int ext4_write_end(struct file *file,
goto errout;
}
copied = ret;
+ ret = 0;
} else
copied = block_write_end(file, mapping, pos,
len, copied, page, fsdata);
@@ -1321,13 +1322,14 @@ static int ext4_write_end(struct file *file,
if (i_size_changed || inline_data)
ret = ext4_mark_inode_dirty(handle, inode);
+errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
* inode->i_size. So truncate them
*/
ext4_orphan_add(handle, inode);
-errout:
+
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
@@ -1410,6 +1412,7 @@ static int ext4_journalled_write_end(struct file *file,
goto errout;
}
copied = ret;
+ ret = 0;
} else if (unlikely(copied < len) && !PageUptodate(page)) {
copied = 0;
ext4_journalled_zero_new_buffers(handle, page, from, to);
@@ -1439,6 +1442,7 @@ static int ext4_journalled_write_end(struct file *file,
ret = ret2;
}
+errout:
if (pos + len > inode->i_size && !verity && ext4_can_truncate(inode))
/* if we have allocated more blocks and copied
* less. We will have blocks allocated outside
@@ -1446,7 +1450,6 @@ static int ext4_journalled_write_end(struct file *file,
*/
ext4_orphan_add(handle, inode);
-errout:
ret2 = ext4_journal_stop(handle);
if (!ret)
ret = ret2;
--
2.31.1
On Thu 15-07-21 09:54:49, Zhang Yi wrote:
> After commit 3da40c7b0898 ("ext4: only call ext4_truncate when size <=
> isize"), i_disksize could always be updated to i_size in ext4_setattr(),
> and we could sure that i_disksize <= i_size since holding inode lock and
> if i_disksize < i_size there are delalloc writes pending in the range
> upto i_size. If the end of the current write is <= i_size, there's no
> need to touch i_disksize since writeback will push i_disksize upto
> i_size eventually. So we can switch to check i_size instead of
> i_disksize in ext4_da_write_end() when write to the end of the file.
> we also could remove ext4_mark_inode_dirty() together because we defer
> inode dirtying to generic_write_end() or ext4_da_write_inline_data_end().
>
> Signed-off-by: Zhang Yi <[email protected]>
Looks good. Feel free to add:
Reviewed-by: Jan Kara <[email protected]>
Honza
> ---
> fs/ext4/inode.c | 34 ++++++++++++++++++----------------
> 1 file changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
> index d8de607849df..dca8e3810443 100644
> --- a/fs/ext4/inode.c
> +++ b/fs/ext4/inode.c
> @@ -3084,35 +3084,37 @@ static int ext4_da_write_end(struct file *file,
> end = start + copied - 1;
>
> /*
> - * generic_write_end() will run mark_inode_dirty() if i_size
> - * changes. So let's piggyback the i_disksize mark_inode_dirty
> - * into that.
> + * Since we are holding inode lock, we are sure i_disksize <=
> + * i_size. We also know that if i_disksize < i_size, there are
> + * delalloc writes pending in the range upto i_size. If the end of
> + * the current write is <= i_size, there's no need to touch
> + * i_disksize since writeback will push i_disksize upto i_size
> + * eventually. If the end of the current write is > i_size and
> + * inside an allocated block (ext4_da_should_update_i_disksize()
> + * check), we need to update i_disksize here as neither
> + * ext4_writepage() nor certain ext4_writepages() paths not
> + * allocating blocks update i_disksize.
> + *
> + * Note that we defer inode dirtying to generic_write_end() /
> + * ext4_da_write_inline_data_end().
> */
> new_i_size = pos + copied;
> - if (copied && new_i_size > EXT4_I(inode)->i_disksize) {
> + if (copied && new_i_size > inode->i_size) {
> if (ext4_has_inline_data(inode) ||
> - ext4_da_should_update_i_disksize(page, end)) {
> + ext4_da_should_update_i_disksize(page, end))
> ext4_update_i_disksize(inode, new_i_size);
> - /* We need to mark inode dirty even if
> - * new_i_size is less that inode->i_size
> - * bu greater than i_disksize.(hint delalloc)
> - */
> - ret = ext4_mark_inode_dirty(handle, inode);
> - }
> }
>
> if (write_mode != CONVERT_INLINE_DATA &&
> ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) &&
> ext4_has_inline_data(inode))
> - ret2 = ext4_da_write_inline_data_end(inode, pos, len, copied,
> + ret = ext4_da_write_inline_data_end(inode, pos, len, copied,
> page);
> else
> - ret2 = generic_write_end(file, mapping, pos, len, copied,
> + ret = generic_write_end(file, mapping, pos, len, copied,
> page, fsdata);
>
> - copied = ret2;
> - if (ret2 < 0)
> - ret = ret2;
> + copied = ret;
> ret2 = ext4_journal_stop(handle);
> if (unlikely(ret2 && !ret))
> ret = ret2;
> --
> 2.31.1
>
--
Jan Kara <[email protected]>
SUSE Labs, CR
On Thu 15-07-21 09:54:51, Zhang Yi wrote:
> Now that the inline_data file write end procedure are falled into the
> common write end functions, it is not clear. Factor them out and do
> some cleanup. This patch also drop ext4_da_write_inline_data_end()
> and switch to use ext4_write_inline_data_end() instead because we also
> need to do the same error processing if we failed to write data into
> inline entry.
>
> Signed-off-by: Zhang Yi <[email protected]>
Just two small comments below.
> diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
> index 28b666f25ac2..3d227b32b21c 100644
> --- a/fs/ext4/inline.c
> +++ b/fs/ext4/inline.c
...
> +out:
> + /*
> + * If we have allocated more blocks and copied less. We will have
> + * blocks allocated outside inode->i_size, so truncate them.
> + */
> + if (pos + len > inode->i_size && ext4_can_truncate(inode))
> + ext4_orphan_add(handle, inode);
I don't think we need this error handling here. For inline data we never
allocate any blocks so shorter writes don't need any cleanup.
> - return copied;
> + ret2 = ext4_journal_stop(handle);
> + if (!ret)
> + ret = ret2;
> + if (pos + len > inode->i_size) {
> + ext4_truncate_failed_write(inode);
> + /*
> + * If truncate failed early the inode might still be
> + * on the orphan list; we need to make sure the inode
> + * is removed from the orphan list in that case.
> + */
> + if (inode->i_nlink)
> + ext4_orphan_del(NULL, inode);
> + }
And this can go away as well...
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR
On 2021/7/15 20:08, Jan Kara wrote:
> On Thu 15-07-21 09:54:51, Zhang Yi wrote:
>> Now that the inline_data file write end procedure are falled into the
>> common write end functions, it is not clear. Factor them out and do
>> some cleanup. This patch also drop ext4_da_write_inline_data_end()
>> and switch to use ext4_write_inline_data_end() instead because we also
>> need to do the same error processing if we failed to write data into
>> inline entry.
>>
>> Signed-off-by: Zhang Yi <[email protected]>
>
> Just two small comments below.
>
>> diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
>> index 28b666f25ac2..3d227b32b21c 100644
>> --- a/fs/ext4/inline.c
>> +++ b/fs/ext4/inline.c
> ...
>> +out:
>> + /*
>> + * If we have allocated more blocks and copied less. We will have
>> + * blocks allocated outside inode->i_size, so truncate them.
>> + */
>> + if (pos + len > inode->i_size && ext4_can_truncate(inode))
>> + ext4_orphan_add(handle, inode);
>
> I don't think we need this error handling here. For inline data we never
> allocate any blocks so shorter writes don't need any cleanup.
>
>> - return copied;
>> + ret2 = ext4_journal_stop(handle);
>> + if (!ret)
>> + ret = ret2;
>> + if (pos + len > inode->i_size) {
>> + ext4_truncate_failed_write(inode);
>> + /*
>> + * If truncate failed early the inode might still be
>> + * on the orphan list; we need to make sure the inode
>> + * is removed from the orphan list in that case.
>> + */
>> + if (inode->i_nlink)
>> + ext4_orphan_del(NULL, inode);
>> + }
>
> And this can go away as well...
>
Yeah, but if we don't call ext4_truncate_failed_write()->..->
ext4_inline_data_truncate(), it will lead to incorrect larger i_inline_size
and data entry. Although it seems harmless (i_size can prevent read zero
data), I think it's better to restore the data entry(the comments need
change later), or else it will occupy more xattr space. What do you think ?
Thanks,
Yi.
On Fri 16-07-21 11:56:06, Zhang Yi wrote:
> On 2021/7/15 20:08, Jan Kara wrote:
> > On Thu 15-07-21 09:54:51, Zhang Yi wrote:
> >> Now that the inline_data file write end procedure are falled into the
> >> common write end functions, it is not clear. Factor them out and do
> >> some cleanup. This patch also drop ext4_da_write_inline_data_end()
> >> and switch to use ext4_write_inline_data_end() instead because we also
> >> need to do the same error processing if we failed to write data into
> >> inline entry.
> >>
> >> Signed-off-by: Zhang Yi <[email protected]>
> >
> > Just two small comments below.
> >
> >> diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
> >> index 28b666f25ac2..3d227b32b21c 100644
> >> --- a/fs/ext4/inline.c
> >> +++ b/fs/ext4/inline.c
> > ...
> >> +out:
> >> + /*
> >> + * If we have allocated more blocks and copied less. We will have
> >> + * blocks allocated outside inode->i_size, so truncate them.
> >> + */
> >> + if (pos + len > inode->i_size && ext4_can_truncate(inode))
> >> + ext4_orphan_add(handle, inode);
> >
> > I don't think we need this error handling here. For inline data we never
> > allocate any blocks so shorter writes don't need any cleanup.
> >
> >> - return copied;
> >> + ret2 = ext4_journal_stop(handle);
> >> + if (!ret)
> >> + ret = ret2;
> >> + if (pos + len > inode->i_size) {
> >> + ext4_truncate_failed_write(inode);
> >> + /*
> >> + * If truncate failed early the inode might still be
> >> + * on the orphan list; we need to make sure the inode
> >> + * is removed from the orphan list in that case.
> >> + */
> >> + if (inode->i_nlink)
> >> + ext4_orphan_del(NULL, inode);
> >> + }
> >
> > And this can go away as well...
> >
>
> Yeah, but if we don't call ext4_truncate_failed_write()->..->
> ext4_inline_data_truncate(), it will lead to incorrect larger i_inline_size
> and data entry. Although it seems harmless (i_size can prevent read zero
> data), I think it's better to restore the data entry(the comments need
> change later), or else it will occupy more xattr space. What do you think ?
Good point. I've found this out last time when I was reviewing your patches
and then forgot again. So please leave the code there but fix this
misleading comment:
/*
* If we have allocated more blocks and copied less. We will have
* blocks allocated outside inode->i_size, so truncate them.
*/
Something like:
/*
* If we didn't copy as much data as expected, we need to trim back size of
* xattr containing inline data.
*/
Honza
--
Jan Kara <[email protected]>
SUSE Labs, CR
On 2021/7/16 18:08, Jan Kara wrote:
> On Fri 16-07-21 11:56:06, Zhang Yi wrote:
>> On 2021/7/15 20:08, Jan Kara wrote:
>>> On Thu 15-07-21 09:54:51, Zhang Yi wrote:
>>>> Now that the inline_data file write end procedure are falled into the
>>>> common write end functions, it is not clear. Factor them out and do
>>>> some cleanup. This patch also drop ext4_da_write_inline_data_end()
>>>> and switch to use ext4_write_inline_data_end() instead because we also
>>>> need to do the same error processing if we failed to write data into
>>>> inline entry.
>>>>
>>>> Signed-off-by: Zhang Yi <[email protected]>
>>>
>>> Just two small comments below.
>>>
>>>> diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
>>>> index 28b666f25ac2..3d227b32b21c 100644
>>>> --- a/fs/ext4/inline.c
>>>> +++ b/fs/ext4/inline.c
>>> ...
>>>> +out:
>>>> + /*
>>>> + * If we have allocated more blocks and copied less. We will have
>>>> + * blocks allocated outside inode->i_size, so truncate them.
>>>> + */
>>>> + if (pos + len > inode->i_size && ext4_can_truncate(inode))
>>>> + ext4_orphan_add(handle, inode);
>>>
>>> I don't think we need this error handling here. For inline data we never
>>> allocate any blocks so shorter writes don't need any cleanup.
>>>
>>>> - return copied;
>>>> + ret2 = ext4_journal_stop(handle);
>>>> + if (!ret)
>>>> + ret = ret2;
>>>> + if (pos + len > inode->i_size) {
>>>> + ext4_truncate_failed_write(inode);
>>>> + /*
>>>> + * If truncate failed early the inode might still be
>>>> + * on the orphan list; we need to make sure the inode
>>>> + * is removed from the orphan list in that case.
>>>> + */
>>>> + if (inode->i_nlink)
>>>> + ext4_orphan_del(NULL, inode);
>>>> + }
>>>
>>> And this can go away as well...
>>>
>>
>> Yeah, but if we don't call ext4_truncate_failed_write()->..->
>> ext4_inline_data_truncate(), it will lead to incorrect larger i_inline_size
>> and data entry. Although it seems harmless (i_size can prevent read zero
>> data), I think it's better to restore the data entry(the comments need
>> change later), or else it will occupy more xattr space. What do you think ?
>
> Good point. I've found this out last time when I was reviewing your patches
> and then forgot again. So please leave the code there but fix this
> misleading comment:
>
> /*
> * If we have allocated more blocks and copied less. We will have
> * blocks allocated outside inode->i_size, so truncate them.
> */
>
> Something like:
>
> /*
> * If we didn't copy as much data as expected, we need to trim back size of
> * xattr containing inline data.
> */
>
OK.
Thanks,
Yi.