2022-03-22 01:35:07

by yebin (H)

[permalink] [raw]
Subject: [PATCH -next] ext4: fix bug_on in start_this_handle during umount filesystem

We got issue as follows:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:389!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
Workqueue: events flush_stashed_error_work
RIP: 0010:start_this_handle+0x41c/0x1160
RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
jbd2__journal_start+0x38a/0x790
jbd2_journal_start+0x19/0x20
flush_stashed_error_work+0x110/0x2b3
process_one_work+0x688/0x1080
worker_thread+0x8b/0xc50
kthread+0x26f/0x310
ret_from_fork+0x22/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---

Above issue may happen as follows:
umount read procfs error_work
ext4_put_super
flush_work(&sbi->s_error_work);

ext4_mb_seq_groups_show
ext4_mb_load_buddy_gfp
ext4_mb_init_group
ext4_mb_init_cache
ext4_read_block_bitmap_nowait
ext4_validate_block_bitmap
ext4_error
ext4_handle_error
schedule_work(&EXT4_SB(sb)->s_error_work);

ext4_unregister_sysfs(sb);
jbd2_journal_destroy(sbi->s_journal);
journal_kill_thread
journal->j_flags |= JBD2_UNMOUNT;

flush_stashed_error_work
jbd2_journal_start
start_this_handle
BUG_ON(journal->j_flags & JBD2_UNMOUNT);

To solve this issue, we call 'ext4_unregister_sysfs' in 'ext4_put_super' firstly
like 'ext4_fill_super' error handle.

Signed-off-by: Ye Bin <[email protected]>
---
fs/ext4/super.c | 19 ++++++++++++-------
1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 81749eaddf4c..a673012e35c8 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1199,20 +1199,25 @@ static void ext4_put_super(struct super_block *sb)
int aborted = 0;
int i, err;

- ext4_unregister_li_request(sb);
- ext4_quota_off_umount(sb);
-
- flush_work(&sbi->s_error_work);
- destroy_workqueue(sbi->rsv_conversion_wq);
- ext4_release_orphan_info(sb);
-
/*
* Unregister sysfs before destroying jbd2 journal.
* Since we could still access attr_journal_task attribute via sysfs
* path which could have sbi->s_journal->j_task as NULL
+ * Unregister sysfs before flush sbi->s_error_work.
+ * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
+ * read metadata verify failed then will queue error work.
+ * flush_stashed_error_work will call start_this_handle may trigger
+ * BUG_ON.
*/
ext4_unregister_sysfs(sb);

+ ext4_unregister_li_request(sb);
+ ext4_quota_off_umount(sb);
+
+ flush_work(&sbi->s_error_work);
+ destroy_workqueue(sbi->rsv_conversion_wq);
+ ext4_release_orphan_info(sb);
+
if (sbi->s_journal) {
aborted = is_journal_aborted(sbi->s_journal);
err = jbd2_journal_destroy(sbi->s_journal);
--
2.31.1


2022-03-22 05:32:43

by Ritesh Harjani

[permalink] [raw]
Subject: Re: [PATCH -next] ext4: fix bug_on in start_this_handle during umount filesystem

On 22/03/22 09:24AM, Ye Bin wrote:
> We got issue as follows:
> ------------[ cut here ]------------
> kernel BUG at fs/jbd2/transaction.c:389!
> invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
> CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
> Workqueue: events flush_stashed_error_work
> RIP: 0010:start_this_handle+0x41c/0x1160
> RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
> RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
> RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
> RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
> R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
> R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
> FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> <TASK>
> jbd2__journal_start+0x38a/0x790
> jbd2_journal_start+0x19/0x20
> flush_stashed_error_work+0x110/0x2b3
> process_one_work+0x688/0x1080
> worker_thread+0x8b/0xc50
> kthread+0x26f/0x310
> ret_from_fork+0x22/0x30
> </TASK>
> Modules linked in:
> ---[ end trace 0000000000000000 ]---
>
> Above issue may happen as follows:
> umount read procfs error_work
> ext4_put_super
> flush_work(&sbi->s_error_work);
>
> ext4_mb_seq_groups_show
> ext4_mb_load_buddy_gfp
> ext4_mb_init_group
> ext4_mb_init_cache
> ext4_read_block_bitmap_nowait
> ext4_validate_block_bitmap
> ext4_error
^^^^^^^ I am guessing this occurred due to some error
injection framework? or was it a bad disk?

> ext4_handle_error
> schedule_work(&EXT4_SB(sb)->s_error_work);
>
> ext4_unregister_sysfs(sb);
> jbd2_journal_destroy(sbi->s_journal);
> journal_kill_thread
> journal->j_flags |= JBD2_UNMOUNT;
>
> flush_stashed_error_work
> jbd2_journal_start
> start_this_handle
> BUG_ON(journal->j_flags & JBD2_UNMOUNT);
>
> To solve this issue, we call 'ext4_unregister_sysfs' in 'ext4_put_super' firstly
> like 'ext4_fill_super' error handle.

I don't see a reason why not. In fact to simulate this more reliably and to add
a fstest around this - we could do following.
(If we are adding a fstest we might also explore checking other exported sysfs options
racing with umount/mount or module load/unload).
Like in past it was journal_task at [1]


Thread-1 Thread-2
while [ 1 ]: while [ 1 ]:
echo 1 > /sys/fs/ext4/<dev>/trigger_fs_error umount /dev/<dev>
sleep random sleep random
mount /dev/<dev> /mnt

Currently we call flush_work(&sbi->s_error_work) and then
ext4_unregister_sysfs(). So if someone triggered an fs error before
unregistering from sysfs, it will schedule_work() which might race similar
to jbd2_journal_destroy() like what you showed above.

So calling ext4_unregister_sysfs() as the first thing in ext4_put_super(),
looks good to me.

Reviewed-by: Ritesh Harjani <[email protected]>


[1]: https://lore.kernel.org/all/[email protected]/


>
> Signed-off-by: Ye Bin <[email protected]>
> ---
> fs/ext4/super.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 81749eaddf4c..a673012e35c8 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -1199,20 +1199,25 @@ static void ext4_put_super(struct super_block *sb)
> int aborted = 0;
> int i, err;
>
> - ext4_unregister_li_request(sb);
> - ext4_quota_off_umount(sb);
> -
> - flush_work(&sbi->s_error_work);
> - destroy_workqueue(sbi->rsv_conversion_wq);
> - ext4_release_orphan_info(sb);
> -
> /*
> * Unregister sysfs before destroying jbd2 journal.
> * Since we could still access attr_journal_task attribute via sysfs
> * path which could have sbi->s_journal->j_task as NULL
> + * Unregister sysfs before flush sbi->s_error_work.
> + * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
> + * read metadata verify failed then will queue error work.
> + * flush_stashed_error_work will call start_this_handle may trigger
> + * BUG_ON.
> */
> ext4_unregister_sysfs(sb);
>
> + ext4_unregister_li_request(sb);
> + ext4_quota_off_umount(sb);
> +
> + flush_work(&sbi->s_error_work);
> + destroy_workqueue(sbi->rsv_conversion_wq);
> + ext4_release_orphan_info(sb);
> +
> if (sbi->s_journal) {
> aborted = is_journal_aborted(sbi->s_journal);
> err = jbd2_journal_destroy(sbi->s_journal);
> --
> 2.31.1
>

2022-03-22 12:40:54

by Jan Kara

[permalink] [raw]
Subject: Re: [PATCH -next] ext4: fix bug_on in start_this_handle during umount filesystem

On Tue 22-03-22 09:24:19, Ye Bin wrote:
> We got issue as follows:
> ------------[ cut here ]------------
> kernel BUG at fs/jbd2/transaction.c:389!
> invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
> CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
> Workqueue: events flush_stashed_error_work
> RIP: 0010:start_this_handle+0x41c/0x1160
> RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
> RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
> RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
> RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
> R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
> R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
> FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> <TASK>
> jbd2__journal_start+0x38a/0x790
> jbd2_journal_start+0x19/0x20
> flush_stashed_error_work+0x110/0x2b3
> process_one_work+0x688/0x1080
> worker_thread+0x8b/0xc50
> kthread+0x26f/0x310
> ret_from_fork+0x22/0x30
> </TASK>
> Modules linked in:
> ---[ end trace 0000000000000000 ]---
>
> Above issue may happen as follows:
> umount read procfs error_work
> ext4_put_super
> flush_work(&sbi->s_error_work);
>
> ext4_mb_seq_groups_show
> ext4_mb_load_buddy_gfp
> ext4_mb_init_group
> ext4_mb_init_cache
> ext4_read_block_bitmap_nowait
> ext4_validate_block_bitmap
> ext4_error
> ext4_handle_error
> schedule_work(&EXT4_SB(sb)->s_error_work);
>
> ext4_unregister_sysfs(sb);
> jbd2_journal_destroy(sbi->s_journal);
> journal_kill_thread
> journal->j_flags |= JBD2_UNMOUNT;
>
> flush_stashed_error_work
> jbd2_journal_start
> start_this_handle
> BUG_ON(journal->j_flags & JBD2_UNMOUNT);
>
> To solve this issue, we call 'ext4_unregister_sysfs' in 'ext4_put_super' firstly
> like 'ext4_fill_super' error handle.
>
> Signed-off-by: Ye Bin <[email protected]>

Looks good. Thanks! Feel free to add:

Reviewed-by: Jan Kara <[email protected]>

Honza

> ---
> fs/ext4/super.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/fs/ext4/super.c b/fs/ext4/super.c
> index 81749eaddf4c..a673012e35c8 100644
> --- a/fs/ext4/super.c
> +++ b/fs/ext4/super.c
> @@ -1199,20 +1199,25 @@ static void ext4_put_super(struct super_block *sb)
> int aborted = 0;
> int i, err;
>
> - ext4_unregister_li_request(sb);
> - ext4_quota_off_umount(sb);
> -
> - flush_work(&sbi->s_error_work);
> - destroy_workqueue(sbi->rsv_conversion_wq);
> - ext4_release_orphan_info(sb);
> -
> /*
> * Unregister sysfs before destroying jbd2 journal.
> * Since we could still access attr_journal_task attribute via sysfs
> * path which could have sbi->s_journal->j_task as NULL
> + * Unregister sysfs before flush sbi->s_error_work.
> + * Since user may read /proc/fs/ext4/xx/mb_groups during umount, If
> + * read metadata verify failed then will queue error work.
> + * flush_stashed_error_work will call start_this_handle may trigger
> + * BUG_ON.
> */
> ext4_unregister_sysfs(sb);
>
> + ext4_unregister_li_request(sb);
> + ext4_quota_off_umount(sb);
> +
> + flush_work(&sbi->s_error_work);
> + destroy_workqueue(sbi->rsv_conversion_wq);
> + ext4_release_orphan_info(sb);
> +
> if (sbi->s_journal) {
> aborted = is_journal_aborted(sbi->s_journal);
> err = jbd2_journal_destroy(sbi->s_journal);
> --
> 2.31.1
>
--
Jan Kara <[email protected]>
SUSE Labs, CR

2022-04-04 08:49:05

by Theodore Ts'o

[permalink] [raw]
Subject: Re: [PATCH -next] ext4: fix bug_on in start_this_handle during umount filesystem

On Tue, 22 Mar 2022 09:24:19 +0800, Ye Bin wrote:
> We got issue as follows:
> ------------[ cut here ]------------
> kernel BUG at fs/jbd2/transaction.c:389!
> invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
> CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197
> Workqueue: events flush_stashed_error_work
> RIP: 0010:start_this_handle+0x41c/0x1160
> RSP: 0018:ffff888106b47c20 EFLAGS: 00010202
> RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac
> RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050
> RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a
> R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000
> R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000
> FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
> Call Trace:
> <TASK>
> jbd2__journal_start+0x38a/0x790
> jbd2_journal_start+0x19/0x20
> flush_stashed_error_work+0x110/0x2b3
> process_one_work+0x688/0x1080
> worker_thread+0x8b/0xc50
> kthread+0x26f/0x310
> ret_from_fork+0x22/0x30
> </TASK>
> Modules linked in:
> ---[ end trace 0000000000000000 ]---
>
> [...]

Applied, thanks!

[1/1] ext4: fix bug_on in start_this_handle during umount filesystem
commit: 20164749617e56d584313ad775d6dd3b7da40dc1

Best regards,
--
Theodore Ts'o <[email protected]>