According to the mke2fs man page, the supported cluster-size values
for an ext4 filesystem are 2048 to 256M bytes. However, this is not
the case.
When mkfs is run to create a filesystem with following specifications:
* 1k blocksize and cluster-size greater than 32M
* 2k blocksize and cluster-size greater than 64M
* 4k blocksize and cluster-size greater than 128M
mkfs fails with "Invalid argument passed to ext2 library while trying
to create journal" error. In general, when the cluster-size to blocksize
ratio is greater than 32k, mkfs fails with this error.
Went through the code and found out that the function
`ext2fs_new_range()` is the source of this error. This is because when
the cluster-size to blocksize ratio exceeds 32k, the length argument
to the function `ext2fs_new_range()` results in 0. Hence, the error.
This patch corrects the valid cluster-size values.
v2->v3:
Remove redundant words and add info about how cluster-sizes that are
not powers of 2 are rounded.
---
misc/mke2fs.8.in | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in
index 30f97bb5..c7b21f9d 100644
--- a/misc/mke2fs.8.in
+++ b/misc/mke2fs.8.in
@@ -232,9 +232,13 @@ test is used instead of a fast read-only test.
.TP
.B \-C " cluster-size"
Specify the size of cluster in bytes for file systems using the bigalloc
-feature. Valid cluster-size values are from 2048 to 256M bytes per
-cluster. This can only be specified if the bigalloc feature is
-enabled. (See the
+feature. Valid cluster-size values range from 2 to 32768 times the
+filesystem blocksize and must be a power of 2. If a cluster-size that is
+not a power of 2 is provided, it will be rounded down to the nearest
+power of 2 that is less than the given cluster-size. For example,
+specifying '-C 20k', '-C 30k', or '-C 17k' will result in a cluster-size
+of 16k. The cluster-size can only be specified if the
+bigalloc feature is enabled. (See the
.B ext4 (5)
man page for more details about bigalloc.) The default cluster size if
bigalloc is enabled is 16 times the block size.
--
2.39.3
On Wed, Apr 03, 2024 at 04:30:37AM +0000, Srivathsa Dara wrote:
> According to the mke2fs man page, the supported cluster-size values
> for an ext4 filesystem are 2048 to 256M bytes. However, this is not
> the case.
>
> When mkfs is run to create a filesystem with following specifications:
> * 1k blocksize and cluster-size greater than 32M
> * 2k blocksize and cluster-size greater than 64M
> * 4k blocksize and cluster-size greater than 128M
> mkfs fails with "Invalid argument passed to ext2 library while trying
> to create journal" error. In general, when the cluster-size to blocksize
> ratio is greater than 32k, mkfs fails with this error.
>
> Went through the code and found out that the function
> `ext2fs_new_range()` is the source of this error. This is because when
> the cluster-size to blocksize ratio exceeds 32k, the length argument
> to the function `ext2fs_new_range()` results in 0. Hence, the error.
>
> This patch corrects the valid cluster-size values.
>
> v2->v3:
> Remove redundant words and add info about how cluster-sizes that are
> not powers of 2 are rounded.
> ---
> misc/mke2fs.8.in | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/misc/mke2fs.8.in b/misc/mke2fs.8.in
> index 30f97bb5..c7b21f9d 100644
> --- a/misc/mke2fs.8.in
> +++ b/misc/mke2fs.8.in
> @@ -232,9 +232,13 @@ test is used instead of a fast read-only test.
> .TP
> .B \-C " cluster-size"
> Specify the size of cluster in bytes for file systems using the bigalloc
> -feature. Valid cluster-size values are from 2048 to 256M bytes per
> -cluster. This can only be specified if the bigalloc feature is
> -enabled. (See the
> +feature. Valid cluster-size values range from 2 to 32768 times the
> +filesystem blocksize and must be a power of 2. If a cluster-size that is
> +not a power of 2 is provided, it will be rounded down to the nearest
> +power of 2 that is less than the given cluster-size. For example,
> +specifying '-C 20k', '-C 30k', or '-C 17k' will result in a cluster-size
> +of 16k. The cluster-size can only be specified if the
> +bigalloc feature is enabled. (See the
Thanks for updating the documentation,
Reviewed-by: Darrick J. Wong <[email protected]>
--D
> .B ext4 (5)
> man page for more details about bigalloc.) The default cluster size if
> bigalloc is enabled is 16 times the block size.
> --
> 2.39.3
>
>
On Wed, 03 Apr 2024 04:30:37 +0000, Srivathsa Dara wrote:
> According to the mke2fs man page, the supported cluster-size values
> for an ext4 filesystem are 2048 to 256M bytes. However, this is not
> the case.
>
> When mkfs is run to create a filesystem with following specifications:
> * 1k blocksize and cluster-size greater than 32M
> * 2k blocksize and cluster-size greater than 64M
> * 4k blocksize and cluster-size greater than 128M
> mkfs fails with "Invalid argument passed to ext2 library while trying
> to create journal" error. In general, when the cluster-size to blocksize
> ratio is greater than 32k, mkfs fails with this error.
>
> [...]
Applied, thanks!
[1/1] e2fsprogs: misc/mke2fs.8.in: Correct valid cluster-size values
commit: 87cbb381f2e2fb9aab316187a70acca9f6d5061b
Best regards,
--
Theodore Ts'o <[email protected]>