Regression test for:
c5c72d8 ext4: fix online resizing for ext3-compat file systems
Signed-off-by: Eric Sandeen <[email protected]>
---
diff --git a/tests/ext4/306 b/tests/ext4/306
new file mode 100755
index 0000000..6a961ee
--- /dev/null
+++ b/tests/ext4/306
@@ -0,0 +1,83 @@
+#! /bin/bash
+# FS QA Test No. ext4/306
+#
+# Test that blocks are available to non-extent files after a resize2fs
+# Regression test for commit:
+# c5c72d8 ext4: fix online resizing for ext3-compat file systems
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+PIDS=""
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ _scratch_unmount
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs ext4
+_supported_os Linux
+
+_require_scratch
+
+# This needs to mount ext3; might require ext3 driver, or ext4
+# might handle it itself. Find out if we have it one way or another.
+modprobe ext3 > /dev/null 2>&1
+grep -q ext3 /proc/filesystems || _notrun "This test requires ext3 support"
+
+rm -f $seqres.full
+echo "Silence is golden"
+
+# Make a small ext3 fs, (extents disabled) & mount it
+yes | mkfs.ext3 $SCRATCH_DEV 512m >> $seqres.full 2>&1
+_scratch_mount -t ext3 || _fail "couldn't mount fs as ext3"
+# Create a small non-extent-based file
+echo "Create 1m testfile1"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 0 1m" | _filter_xfs_io
+echo "Create testfile2 to fill the fs"
+# A large non-extent-based file filling the fs; this will run out & fail
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile2 -c "pwrite 0 512m" | _filter_xfs_io
+
+# Remount as ext4
+_scratch_unmount
+_scratch_mount -t ext4 || _fail "couldn't remount fs as ext4"
+df -h $SCRATCH_MNT >> $seqres.full
+
+# Grow it by 512m
+echo "Resize to 1g"
+resize2fs $SCRATCH_DEV 1g >> $seqres.full 2>&1 || _fail "Could not resize to 1g"
+df -h $SCRATCH_MNT >> $seqres.full
+
+# See if we can add more blocks to the files
+echo "append 2m to testfile1"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 1m 2m" | _filter_xfs_io
+echo "append 2m to testfile2"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 512m 2m" | _filter_xfs_io
+
+status=0
+exit
diff --git a/tests/ext4/306.out b/tests/ext4/306.out
new file mode 100644
index 0000000..654637d
--- /dev/null
+++ b/tests/ext4/306.out
@@ -0,0 +1,14 @@
+QA output created by 306
+Silence is golden
+Create 1m testfile1
+wrote 1048576/1048576 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Create testfile2 to fill the fs
+pwrite64: No space left on device
+Resize to 1g
+append 2m to testfile1
+wrote 2097152/2097152 bytes at offset 1048576
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+append 2m to testfile2
+wrote 2097152/2097152 bytes at offset 536870912
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/ext4/group b/tests/ext4/group
index 53af708..4c3e2f4 100644
--- a/tests/ext4/group
+++ b/tests/ext4/group
@@ -9,3 +9,4 @@
303 aio dangerous ioctl rw stress
304 aio dangerous ioctl rw stress
305 auto
+306 dangerous rw resize quick
On Fri, May 10, 2013 at 6:02 AM, Eric Sandeen <[email protected]> wrote:
> Regression test for:
>
> c5c72d8 ext4: fix online resizing for ext3-compat file systems
>
> Signed-off-by: Eric Sandeen <[email protected]>
> ---
>
> diff --git a/tests/ext4/306 b/tests/ext4/306
> new file mode 100755
> index 0000000..6a961ee
> --- /dev/null
> +++ b/tests/ext4/306
> @@ -0,0 +1,83 @@
> +#! /bin/bash
> +# FS QA Test No. ext4/306
> +#
> +# Test that blocks are available to non-extent files after a resize2fs
> +# Regression test for commit:
> +# c5c72d8 ext4: fix online resizing for ext3-compat file systems
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +PIDS=""
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + _scratch_unmount
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs ext4
> +_supported_os Linux
> +
> +_require_scratch
> +
> +# This needs to mount ext3; might require ext3 driver, or ext4
> +# might handle it itself. Find out if we have it one way or another.
> +modprobe ext3 > /dev/null 2>&1
> +grep -q ext3 /proc/filesystems || _notrun "This test requires ext3
> support"
> +
> +rm -f $seqres.full
> +echo "Silence is golden"
>
The test has verbose output log, so "Silence is golden" is not true here,
remove this line or redirect other echo to $seqres.full ?
> +
> +# Make a small ext3 fs, (extents disabled) & mount it
> +yes | mkfs.ext3 $SCRATCH_DEV 512m >> $seqres.full 2>&1
> +_scratch_mount -t ext3 || _fail "couldn't mount fs as ext3"
> +# Create a small non-extent-based file
> +echo "Create 1m testfile1"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 0 1m" | _filter_xfs_io
> +echo "Create testfile2 to fill the fs"
> +# A large non-extent-based file filling the fs; this will run out & fail
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile2 -c "pwrite 0 512m" | _filter_xfs_io
> +
> +# Remount as ext4
> +_scratch_unmount
> +_scratch_mount -t ext4 || _fail "couldn't remount fs as ext4"
> +df -h $SCRATCH_MNT >> $seqres.full
> +
> +# Grow it by 512m
> +echo "Resize to 1g"
> +resize2fs $SCRATCH_DEV 1g >> $seqres.full 2>&1 || _fail "Could not resize
> to 1g"
> +df -h $SCRATCH_MNT >> $seqres.full
> +
> +# See if we can add more blocks to the files
> +echo "append 2m to testfile1"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 1m 2m" | _filter_xfs_io
> +echo "append 2m to testfile2"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 512m 2m" |
> _filter_xfs_io
> +
> +status=0
> +exit
> diff --git a/tests/ext4/306.out b/tests/ext4/306.out
> new file mode 100644
> index 0000000..654637d
> --- /dev/null
> +++ b/tests/ext4/306.out
> @@ -0,0 +1,14 @@
> +QA output created by 306
> +Silence is golden
> +Create 1m testfile1
> +wrote 1048576/1048576 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Create testfile2 to fill the fs
> +pwrite64: No space left on device
> +Resize to 1g
> +append 2m to testfile1
> +wrote 2097152/2097152 bytes at offset 1048576
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +append 2m to testfile2
> +wrote 2097152/2097152 bytes at offset 536870912
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/ext4/group b/tests/ext4/group
> index 53af708..4c3e2f4 100644
> --- a/tests/ext4/group
> +++ b/tests/ext4/group
> @@ -9,3 +9,4 @@
> 303 aio dangerous ioctl rw stress
> 304 aio dangerous ioctl rw stress
> 305 auto
> +306 dangerous rw resize quick
>
I'm wondering why it's not in auto group :)
Otherwise patch looks good to me.
Eryu Guan
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ext4" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On 5/9/13 10:03 PM, Eryu Guan wrote:
> On Fri, May 10, 2013 at 6:02 AM, Eric Sandeen <[email protected] <mailto:[email protected]>> wrote:
>
...
> index 53af708..4c3e2f4 100644
> --- a/tests/ext4/group
> +++ b/tests/ext4/group
> @@ -9,3 +9,4 @@
> 303 aio dangerous ioctl rw stress
> 304 aio dangerous ioctl rw stress
> 305 auto
> +306 dangerous rw resize quick
>
>
> I'm wondering why it's not in auto group :)
because I forgot about auto! :)
But it's also somewhat dangerous; it could oops or hang, so perhaps
auto is not a good idea.
-Eric
> Otherwise patch looks good to me.
>
> Eryu Guan
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
On Thu, May 09, 2013 at 10:05:56PM -0500, Eric Sandeen wrote:
> On 5/9/13 10:03 PM, Eryu Guan wrote:
> > On Fri, May 10, 2013 at 6:02 AM, Eric Sandeen <[email protected] <mailto:[email protected]>> wrote:
> >
>
> ...
>
> > index 53af708..4c3e2f4 100644
> > --- a/tests/ext4/group
> > +++ b/tests/ext4/group
> > @@ -9,3 +9,4 @@
> > 303 aio dangerous ioctl rw stress
> > 304 aio dangerous ioctl rw stress
> > 305 auto
> > +306 dangerous rw resize quick
> >
> >
> > I'm wondering why it's not in auto group :)
>
>
> because I forgot about auto! :)
>
> But it's also somewhat dangerous; it could oops or hang, so perhaps
> auto is not a good idea.
If the bug has already been fixed, then auto rather than dangerous
should be used. If the hang/panic cannot be fixed, or is going to
take some time to be fixed, that's when dangerous should be used.
Cheers,
Dave.
--
Dave Chinner
[email protected]
Regression test for:
c5c72d8 ext4: fix online resizing for ext3-compat file systems
Signed-off-by: Eric Sandeen <[email protected]>
---
V2: s/dangerous/auto/
good luck!
diff --git a/tests/ext4/306 b/tests/ext4/306
new file mode 100755
index 0000000..6a961ee
--- /dev/null
+++ b/tests/ext4/306
@@ -0,0 +1,83 @@
+#! /bin/bash
+# FS QA Test No. ext4/306
+#
+# Test that blocks are available to non-extent files after a resize2fs
+# Regression test for commit:
+# c5c72d8 ext4: fix online resizing for ext3-compat file systems
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+PIDS=""
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ _scratch_unmount
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+_supported_fs ext4
+_supported_os Linux
+
+_require_scratch
+
+# This needs to mount ext3; might require ext3 driver, or ext4
+# might handle it itself. Find out if we have it one way or another.
+modprobe ext3 > /dev/null 2>&1
+grep -q ext3 /proc/filesystems || _notrun "This test requires ext3 support"
+
+rm -f $seqres.full
+echo "Silence is golden"
+
+# Make a small ext3 fs, (extents disabled) & mount it
+yes | mkfs.ext3 $SCRATCH_DEV 512m >> $seqres.full 2>&1
+_scratch_mount -t ext3 || _fail "couldn't mount fs as ext3"
+# Create a small non-extent-based file
+echo "Create 1m testfile1"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 0 1m" | _filter_xfs_io
+echo "Create testfile2 to fill the fs"
+# A large non-extent-based file filling the fs; this will run out & fail
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile2 -c "pwrite 0 512m" | _filter_xfs_io
+
+# Remount as ext4
+_scratch_unmount
+_scratch_mount -t ext4 || _fail "couldn't remount fs as ext4"
+df -h $SCRATCH_MNT >> $seqres.full
+
+# Grow it by 512m
+echo "Resize to 1g"
+resize2fs $SCRATCH_DEV 1g >> $seqres.full 2>&1 || _fail "Could not resize to 1g"
+df -h $SCRATCH_MNT >> $seqres.full
+
+# See if we can add more blocks to the files
+echo "append 2m to testfile1"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 1m 2m" | _filter_xfs_io
+echo "append 2m to testfile2"
+$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 512m 2m" | _filter_xfs_io
+
+status=0
+exit
diff --git a/tests/ext4/306.out b/tests/ext4/306.out
new file mode 100644
index 0000000..654637d
--- /dev/null
+++ b/tests/ext4/306.out
@@ -0,0 +1,14 @@
+QA output created by 306
+Silence is golden
+Create 1m testfile1
+wrote 1048576/1048576 bytes at offset 0
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Create testfile2 to fill the fs
+pwrite64: No space left on device
+Resize to 1g
+append 2m to testfile1
+wrote 2097152/2097152 bytes at offset 1048576
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+append 2m to testfile2
+wrote 2097152/2097152 bytes at offset 536870912
+XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
diff --git a/tests/ext4/group b/tests/ext4/group
index 53af708..4c3e2f4 100644
--- a/tests/ext4/group
+++ b/tests/ext4/group
@@ -9,3 +9,4 @@
303 aio dangerous ioctl rw stress
304 aio dangerous ioctl rw stress
305 auto
+306 auto rw resize quick
On Fri, May 10, 2013 at 9:23 PM, Eric Sandeen <[email protected]> wrote:
> Regression test for:
>
> c5c72d8 ext4: fix online resizing for ext3-compat file systems
>
> Signed-off-by: Eric Sandeen <[email protected]>
> ---
>
> V2: s/dangerous/auto/
>
> good luck!
>
> diff --git a/tests/ext4/306 b/tests/ext4/306
> new file mode 100755
> index 0000000..6a961ee
> --- /dev/null
> +++ b/tests/ext4/306
> @@ -0,0 +1,83 @@
> +#! /bin/bash
> +# FS QA Test No. ext4/306
> +#
> +# Test that blocks are available to non-extent files after a resize2fs
> +# Regression test for commit:
> +# c5c72d8 ext4: fix online resizing for ext3-compat file systems
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +PIDS=""
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + _scratch_unmount
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +_supported_fs ext4
> +_supported_os Linux
> +
> +_require_scratch
> +
> +# This needs to mount ext3; might require ext3 driver, or ext4
> +# might handle it itself. Find out if we have it one way or another.
> +modprobe ext3 > /dev/null 2>&1
> +grep -q ext3 /proc/filesystems || _notrun "This test requires ext3
> support"
> +
> +rm -f $seqres.full
> +echo "Silence is golden"
>
Is the "Silence is golden" output still needed? I see that it's not
"silence" in 306.out
Otherwise looks good to me.
Thanks,
Eryu Guan
> +
> +# Make a small ext3 fs, (extents disabled) & mount it
> +yes | mkfs.ext3 $SCRATCH_DEV 512m >> $seqres.full 2>&1
> +_scratch_mount -t ext3 || _fail "couldn't mount fs as ext3"
> +# Create a small non-extent-based file
> +echo "Create 1m testfile1"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 0 1m" | _filter_xfs_io
> +echo "Create testfile2 to fill the fs"
> +# A large non-extent-based file filling the fs; this will run out & fail
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile2 -c "pwrite 0 512m" | _filter_xfs_io
> +
> +# Remount as ext4
> +_scratch_unmount
> +_scratch_mount -t ext4 || _fail "couldn't remount fs as ext4"
> +df -h $SCRATCH_MNT >> $seqres.full
> +
> +# Grow it by 512m
> +echo "Resize to 1g"
> +resize2fs $SCRATCH_DEV 1g >> $seqres.full 2>&1 || _fail "Could not resize
> to 1g"
> +df -h $SCRATCH_MNT >> $seqres.full
> +
> +# See if we can add more blocks to the files
> +echo "append 2m to testfile1"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 1m 2m" | _filter_xfs_io
> +echo "append 2m to testfile2"
> +$XFS_IO_PROG -f $SCRATCH_MNT/testfile1 -c "pwrite 512m 2m" |
> _filter_xfs_io
> +
> +status=0
> +exit
> diff --git a/tests/ext4/306.out b/tests/ext4/306.out
> new file mode 100644
> index 0000000..654637d
> --- /dev/null
> +++ b/tests/ext4/306.out
> @@ -0,0 +1,14 @@
> +QA output created by 306
> +Silence is golden
> +Create 1m testfile1
> +wrote 1048576/1048576 bytes at offset 0
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +Create testfile2 to fill the fs
> +pwrite64: No space left on device
> +Resize to 1g
> +append 2m to testfile1
> +wrote 2097152/2097152 bytes at offset 1048576
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> +append 2m to testfile2
> +wrote 2097152/2097152 bytes at offset 536870912
> +XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/ext4/group b/tests/ext4/group
> index 53af708..4c3e2f4 100644
> --- a/tests/ext4/group
> +++ b/tests/ext4/group
> @@ -9,3 +9,4 @@
> 303 aio dangerous ioctl rw stress
> 304 aio dangerous ioctl rw stress
> 305 auto
> +306 auto rw resize quick
>
> _______________________________________________
> xfs mailing list
> [email protected]
> http://oss.sgi.com/mailman/listinfo/xfs
>