Single patch for nfsd in 2.6.16. As the comment say, it is sensible
for this to sit in -mm for a while just in case.
### Comments for Changeset
NFSd makes sure there is enough space to hold the maximum possible
reply before accepting a request. The units for this maximum is
(4byte) words. However in three places, particularly for read
request, the number given is a number of bytes.
This means too much space is reserved which is slightly wasteful.
This is the sort of patch that could uncover a deeper bug, and it is
not critical, so it would be best for it to spend a while in -mm before going in to mainline.
Discovered-by: "Eivind Sarto" <[email protected]>
Cc: "Eivind Sarto" <[email protected]>
Signed-off-by: Neil Brown <[email protected]>
### Diffstat output
./fs/nfsd/nfs3proc.c | 2 +-
./fs/nfsd/nfs4proc.c | 2 +-
./fs/nfsd/nfsproc.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff ./fs/nfsd/nfs3proc.c~current~ ./fs/nfsd/nfs3proc.c
--- ./fs/nfsd/nfs3proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
+++ ./fs/nfsd/nfs3proc.c 2006-03-30 16:48:58.000000000 +1100
@@ -682,7 +682,7 @@ static struct svc_procedure nfsd_proced
PROC(lookup, dirop, dirop, fhandle2, RC_NOCACHE, ST+FH+pAT+pAT),
PROC(access, access, access, fhandle, RC_NOCACHE, ST+pAT+1),
PROC(readlink, readlink, readlink, fhandle, RC_NOCACHE, ST+pAT+1+NFS3_MAXPATHLEN/4),
- PROC(read, read, read, fhandle, RC_NOCACHE, ST+pAT+4+NFSSVC_MAXBLKSIZE),
+ PROC(read, read, read, fhandle, RC_NOCACHE, ST+pAT+4+NFSSVC_MAXBLKSIZE/4),
PROC(write, write, write, fhandle, RC_REPLBUFF, ST+WC+4),
PROC(create, create, create, fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
PROC(mkdir, mkdir, create, fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
diff ./fs/nfsd/nfs4proc.c~current~ ./fs/nfsd/nfs4proc.c
--- ./fs/nfsd/nfs4proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
+++ ./fs/nfsd/nfs4proc.c 2006-03-30 16:48:58.000000000 +1100
@@ -973,7 +973,7 @@ struct nfsd4_voidargs { int dummy; };
*/
static struct svc_procedure nfsd_procedures4[2] = {
PROC(null, void, void, void, RC_NOCACHE, 1),
- PROC(compound, compound, compound, compound, RC_NOCACHE, NFSD_BUFSIZE)
+ PROC(compound, compound, compound, compound, RC_NOCACHE, NFSD_BUFSIZE/4)
};
struct svc_version nfsd_version4 = {
diff ./fs/nfsd/nfsproc.c~current~ ./fs/nfsd/nfsproc.c
--- ./fs/nfsd/nfsproc.c~current~ 2006-03-30 16:48:30.000000000 +1100
+++ ./fs/nfsd/nfsproc.c 2006-03-30 16:48:58.000000000 +1100
@@ -553,7 +553,7 @@ static struct svc_procedure nfsd_proced
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(lookup, diropargs, diropres, fhandle, RC_NOCACHE, ST+FH+AT),
PROC(readlink, readlinkargs, readlinkres, none, RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
- PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE),
+ PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE/4),
PROC(none, void, void, none, RC_NOCACHE, ST),
PROC(write, writeargs, attrstat, fhandle, RC_REPLBUFF, ST+AT),
PROC(create, createargs, diropres, fhandle, RC_REPLBUFF, ST+FH+AT),
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
NFS maillist - [email protected]
https://lists.sourceforge.net/lists/listinfo/nfs
Hi Neil
Can we use this opportunity to change NFSSVC_MAXBLKSIZE from 32K to 64K to
match RPCSVC_MAXPAYLOAD. It makes real difference in I/O performance (we
will still be saving half the space we used to allocate :).
Thanks, Marc.
NeilBrown wrote on 03/29/2006 09:53:50 PM:
> Single patch for nfsd in 2.6.16. As the comment say, it is sensible
> for this to sit in -mm for a while just in case.
>
> ### Comments for Changeset
>
> NFSd makes sure there is enough space to hold the maximum possible
> reply before accepting a request. The units for this maximum is
> (4byte) words. However in three places, particularly for read
> request, the number given is a number of bytes.
>
> This means too much space is reserved which is slightly wasteful.
>
> This is the sort of patch that could uncover a deeper bug, and it is
> not critical, so it would be best for it to spend a while in -mm
> before going in to mainline.
>
> Discovered-by: "Eivind Sarto" <[email protected]>
>
> Cc: "Eivind Sarto" <[email protected]>
>
> Signed-off-by: Neil Brown <[email protected]>
>
> ### Diffstat output
> ./fs/nfsd/nfs3proc.c | 2 +-
> ./fs/nfsd/nfs4proc.c | 2 +-
> ./fs/nfsd/nfsproc.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff ./fs/nfsd/nfs3proc.c~current~ ./fs/nfsd/nfs3proc.c
> --- ./fs/nfsd/nfs3proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfs3proc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -682,7 +682,7 @@ static struct svc_procedure nfsd_proced
> PROC(lookup, dirop, dirop, fhandle2, RC_NOCACHE,
> ST+FH+pAT+pAT),
> PROC(access, access, access, fhandle, RC_NOCACHE,
ST+pAT+1),
> PROC(readlink, readlink, readlink, fhandle, RC_NOCACHE,
> ST+pAT+1+NFS3_MAXPATHLEN/4),
> - PROC(read, read, read, fhandle, RC_NOCACHE,
> ST+pAT+4+NFSSVC_MAXBLKSIZE),
> + PROC(read, read, read, fhandle, RC_NOCACHE,
> ST+pAT+4+NFSSVC_MAXBLKSIZE/4),
> PROC(write, write, write, fhandle, RC_REPLBUFF,
ST+WC+4),
> PROC(create, create, create, fhandle2, RC_REPLBUFF,
> ST+(1+FH+pAT)+WC),
> PROC(mkdir, mkdir, create, fhandle2, RC_REPLBUFF,
> ST+(1+FH+pAT)+WC),
>
> diff ./fs/nfsd/nfs4proc.c~current~ ./fs/nfsd/nfs4proc.c
> --- ./fs/nfsd/nfs4proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfs4proc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -973,7 +973,7 @@ struct nfsd4_voidargs { int dummy; };
> */
> static struct svc_procedure nfsd_procedures4[2] = {
> PROC(null, void, void, void, RC_NOCACHE, 1),
> - PROC(compound, compound, compound, compound, RC_NOCACHE,
NFSD_BUFSIZE)
> + PROC(compound, compound, compound, compound, RC_NOCACHE,
> NFSD_BUFSIZE/4)
> };
>
> struct svc_version nfsd_version4 = {
>
> diff ./fs/nfsd/nfsproc.c~current~ ./fs/nfsd/nfsproc.c
> --- ./fs/nfsd/nfsproc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfsproc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -553,7 +553,7 @@ static struct svc_procedure nfsd_proced
> PROC(none, void, void, none, RC_NOCACHE, ST),
> PROC(lookup, diropargs, diropres, fhandle, RC_NOCACHE,
ST+FH+AT),
> PROC(readlink, readlinkargs, readlinkres, none,
> RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
> - PROC(read, readargs, readres, fhandle, RC_NOCACHE,
> ST+AT+1+NFSSVC_MAXBLKSIZE),
> + PROC(read, readargs, readres, fhandle, RC_NOCACHE,
> ST+AT+1+NFSSVC_MAXBLKSIZE/4),
> PROC(none, void, void, none, RC_NOCACHE, ST),
> PROC(write, writeargs, attrstat, fhandle, RC_REPLBUFF,
ST+AT),
> PROC(create, createargs, diropres, fhandle,
RC_REPLBUFF,ST+FH+AT),
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by xPML, a groundbreaking scripting
language
> that extends applications into web and mobile media. Attend the live
webcast
> and join the prime developer group breaking into this new coding
territory!
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
> _______________________________________________
> NFS maillist - [email protected]
> https://lists.sourceforge.net/lists/listinfo/nfs
On Thu, 2006-03-30 at 16:53 +1100, NeilBrown wrote:
> Single patch for nfsd in 2.6.16. As the comment say, it is sensible
> for this to sit in -mm for a while just in case.
>
> ### Comments for Changeset
>
> NFSd makes sure there is enough space to hold the maximum possible
> reply before accepting a request. The units for this maximum is
> (4byte) words. However in three places, particularly for read
> request, the number given is a number of bytes.
>
> This means too much space is reserved which is slightly wasteful.
>
> This is the sort of patch that could uncover a deeper bug, and it is
> not critical, so it would be best for it to spend a while in -mm before going in to mainline.
>
> Discovered-by: "Eivind Sarto" <[email protected]>
>
> Cc: "Eivind Sarto" <[email protected]>
>
> Signed-off-by: Neil Brown <[email protected]>
>
> ### Diffstat output
> ./fs/nfsd/nfs3proc.c | 2 +-
> ./fs/nfsd/nfs4proc.c | 2 +-
> ./fs/nfsd/nfsproc.c | 2 +-
> 3 files changed, 3 insertions(+), 3 deletions(-)
>
> diff ./fs/nfsd/nfs3proc.c~current~ ./fs/nfsd/nfs3proc.c
> --- ./fs/nfsd/nfs3proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfs3proc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -682,7 +682,7 @@ static struct svc_procedure nfsd_proced
> PROC(lookup, dirop, dirop, fhandle2, RC_NOCACHE, ST+FH+pAT+pAT),
> PROC(access, access, access, fhandle, RC_NOCACHE, ST+pAT+1),
> PROC(readlink, readlink, readlink, fhandle, RC_NOCACHE, ST+pAT+1+NFS3_MAXPATHLEN/4),
> - PROC(read, read, read, fhandle, RC_NOCACHE, ST+pAT+4+NFSSVC_MAXBLKSIZE),
> + PROC(read, read, read, fhandle, RC_NOCACHE, ST+pAT+4+NFSSVC_MAXBLKSIZE/4),
Hmm... Wouldn't it be safer to use XDR_QUADLEN()? I doubt that we will
ever set a NFSSVC_MAXBLKSIZE that is not divisible by 4, but...
> PROC(write, write, write, fhandle, RC_REPLBUFF, ST+WC+4),
> PROC(create, create, create, fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
> PROC(mkdir, mkdir, create, fhandle2, RC_REPLBUFF, ST+(1+FH+pAT)+WC),
>
> diff ./fs/nfsd/nfs4proc.c~current~ ./fs/nfsd/nfs4proc.c
> --- ./fs/nfsd/nfs4proc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfs4proc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -973,7 +973,7 @@ struct nfsd4_voidargs { int dummy; };
> */
> static struct svc_procedure nfsd_procedures4[2] = {
> PROC(null, void, void, void, RC_NOCACHE, 1),
> - PROC(compound, compound, compound, compound, RC_NOCACHE, NFSD_BUFSIZE)
> + PROC(compound, compound, compound, compound, RC_NOCACHE, NFSD_BUFSIZE/4)
Ditto...
> };
>
> struct svc_version nfsd_version4 = {
>
> diff ./fs/nfsd/nfsproc.c~current~ ./fs/nfsd/nfsproc.c
> --- ./fs/nfsd/nfsproc.c~current~ 2006-03-30 16:48:30.000000000 +1100
> +++ ./fs/nfsd/nfsproc.c 2006-03-30 16:48:58.000000000 +1100
> @@ -553,7 +553,7 @@ static struct svc_procedure nfsd_proced
> PROC(none, void, void, none, RC_NOCACHE, ST),
> PROC(lookup, diropargs, diropres, fhandle, RC_NOCACHE, ST+FH+AT),
> PROC(readlink, readlinkargs, readlinkres, none, RC_NOCACHE, ST+1+NFS_MAXPATHLEN/4),
> - PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE),
> + PROC(read, readargs, readres, fhandle, RC_NOCACHE, ST+AT+1+NFSSVC_MAXBLKSIZE/4),
> PROC(none, void, void, none, RC_NOCACHE, ST),
> PROC(write, writeargs, attrstat, fhandle, RC_REPLBUFF, ST+AT),
> PROC(create, createargs, diropres, fhandle, RC_REPLBUFF, ST+FH+AT),
Cheers,
Trond