The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.
Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
Cc: [email protected]
Signed-off-by: Ivan T. Ivanov <[email protected]>
Reviewed-by: Hector Martin <[email protected]>
---
Changes since v1
Rewrite commit message according feedback.
https://lore.kernel.org/all/[email protected]/
drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index a83699de01ec..fdd0c9abc1a1 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -79,7 +79,8 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
/* Apple ARM64 platforms have their own idea of board type, passed in
* via the device tree. They also have an antenna SKU parameter
*/
- if (!of_property_read_string(np, "brcm,board-type", &prop))
+ err = of_property_read_string(np, "brcm,board-type", &prop);
+ if (!err)
settings->board_type = prop;
if (!of_property_read_string(np, "apple,antenna-sku", &prop))
@@ -87,7 +88,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
/* Set board-type to the first string of the machine compatible prop */
root = of_find_node_by_path("/");
- if (root && !settings->board_type) {
+ if (root && err) {
char *board_type;
const char *tmp;
--
2.35.3
On 1/6/2023 2:19 PM, Ivan T. Ivanov wrote:
> The introduction of support for Apple board types inadvertently changed
> the precedence order, causing hybrid SMBIOS+DT platforms to look up the
> firmware using the DMI information instead of the device tree compatible
> to generate the board type. Revert back to the old behavior,
> as affected platforms use firmwares named after the DT compatible.
>
> Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
>
> [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
>
> Cc: [email protected]
> Signed-off-by: Ivan T. Ivanov <[email protected]>
Looks good to me. I do have a question about the devicetree node for
brcmfmac. The driver does a compatible check against
"brcm,bcm4329-fmac". I actually expect all devicetree specifications to
use this. That said I noticed the check for it in brcmf_of_probe()
should be moved so it is the first check done.
Reviewed-by: Arend van Spriel <[email protected]>
> Reviewed-by: Hector Martin <[email protected]>
> ---
> Changes since v1
> Rewrite commit message according feedback.
> https://lore.kernel.org/all/[email protected]/
>
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> index a83699de01ec..fdd0c9abc1a1 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> @@ -79,7 +79,8 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
> /* Apple ARM64 platforms have their own idea of board type, passed in
> * via the device tree. They also have an antenna SKU parameter
> */
> - if (!of_property_read_string(np, "brcm,board-type", &prop))
> + err = of_property_read_string(np, "brcm,board-type", &prop);
> + if (!err)
> settings->board_type = prop;
>
> if (!of_property_read_string(np, "apple,antenna-sku", &prop))
> @@ -87,7 +88,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>
> /* Set board-type to the first string of the machine compatible prop */
> root = of_find_node_by_path("/");
> - if (root && !settings->board_type) {
> + if (root && err) {
> char *board_type;
> const char *tmp;
>
On 07/01/2023 01.21, Arend Van Spriel wrote:
> On 1/6/2023 2:19 PM, Ivan T. Ivanov wrote:
>> The introduction of support for Apple board types inadvertently changed
>> the precedence order, causing hybrid SMBIOS+DT platforms to look up the
>> firmware using the DMI information instead of the device tree compatible
>> to generate the board type. Revert back to the old behavior,
>> as affected platforms use firmwares named after the DT compatible.
>>
>> Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
>>
>> [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
>>
>> Cc: [email protected]
>> Signed-off-by: Ivan T. Ivanov <[email protected]>
>
> Looks good to me. I do have a question about the devicetree node for
> brcmfmac. The driver does a compatible check against
> "brcm,bcm4329-fmac". I actually expect all devicetree specifications to
> use this. That said I noticed the check for it in brcmf_of_probe()
> should be moved so it is the first check done.
We're talking about the machine compatible in the root OF node, not the
compatible for the device itself. That's how firmware selection for
non-Apple platforms works (and has worked since before the Apple stuff
got introduced): first try the machine type which is either derived from
DMI info or the root compatible, and fall back to generic firmware.
The device compatible is indeed always brcm,bcm4329-fmac.
- Hector
On Fri, Jan 6, 2023 at 1:19 PM Ivan T. Ivanov <[email protected]> wrote:
>
> The introduction of support for Apple board types inadvertently changed
> the precedence order, causing hybrid SMBIOS+DT platforms to look up the
> firmware using the DMI information instead of the device tree compatible
> to generate the board type. Revert back to the old behavior,
> as affected platforms use firmwares named after the DT compatible.
>
> Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
>
> [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
>
> Cc: [email protected]
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> Reviewed-by: Hector Martin <[email protected]>
Tested-by: Peter Robinson <[email protected]>
Tested on a RPi3B+, a RPi4B and a Rockchips device with 6.2rc2 and it
fixed the issue I had seen on Fedora.
Thanks
> ---
> Changes since v1
> Rewrite commit message according feedback.
> https://lore.kernel.org/all/[email protected]/
>
> drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> index a83699de01ec..fdd0c9abc1a1 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
> @@ -79,7 +79,8 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
> /* Apple ARM64 platforms have their own idea of board type, passed in
> * via the device tree. They also have an antenna SKU parameter
> */
> - if (!of_property_read_string(np, "brcm,board-type", &prop))
> + err = of_property_read_string(np, "brcm,board-type", &prop);
> + if (!err)
> settings->board_type = prop;
>
> if (!of_property_read_string(np, "apple,antenna-sku", &prop))
> @@ -87,7 +88,7 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
>
> /* Set board-type to the first string of the machine compatible prop */
> root = of_find_node_by_path("/");
> - if (root && !settings->board_type) {
> + if (root && err) {
> char *board_type;
> const char *tmp;
>
> --
> 2.35.3
>
"Ivan T. Ivanov" <[email protected]> wrote:
> The introduction of support for Apple board types inadvertently changed
> the precedence order, causing hybrid SMBIOS+DT platforms to look up the
> firmware using the DMI information instead of the device tree compatible
> to generate the board type. Revert back to the old behavior,
> as affected platforms use firmwares named after the DT compatible.
>
> Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
>
> [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
>
> Cc: [email protected]
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> Reviewed-by: Hector Martin <[email protected]>
> Reviewed-by: Arend van Spriel <[email protected]>
> Tested-by: Peter Robinson <[email protected]>
Dave applied this directly to net tree:
https://git.kernel.org/linus/a5a36720c3f6
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches