From: Mohammed Shafi Shajakhan <[email protected]>
Found this obvious typo while going through the spectral
code design in ath10k
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath10k/spectral.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/spectral.c b/drivers/net/wireless/ath/ath10k/spectral.c
index 4671cfb..7d9b0da 100644
--- a/drivers/net/wireless/ath/ath10k/spectral.c
+++ b/drivers/net/wireless/ath/ath10k/spectral.c
@@ -101,9 +101,9 @@ int ath10k_spectral_process_fft(struct ath10k *ar,
break;
case 80:
/* TODO: As experiments with an analogue sender and various
- * configuaritions (fft-sizes of 64/128/256 and 20/40/80 Mhz)
+ * configurations (fft-sizes of 64/128/256 and 20/40/80 Mhz)
* show, the particular configuration of 80 MHz/64 bins does
- * not match with the other smaples at all. Until the reason
+ * not match with the other samples at all. Until the reason
* for that is found, don't report these samples.
*/
if (bin_len == 64)
--
1.9.1
Mohammed Shafi Shajakhan <[email protected]> wrote:
> From: Mohammed Shafi Shajakhan <[email protected]>
>
> Found this obvious typo while going through the spectral
> code design in ath10k
>
> Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
Thanks, 1 patch applied to ath-next branch of ath.git:
3fa35bacc16a ath10k: fix some typo in spectral code commments
--
Sent by pwcli
https://patchwork.kernel.org/patch/9181333/