From: David Bauer <[email protected]>
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Tested-by: Christoph Krapp <[email protected]>
Signed-off-by: David Bauer <[email protected]>
Signed-off-by: Daniel Golle <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index e95c101c271113..3a035afcf7f99c 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1093,6 +1093,19 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
kfree(rt2x00dev->spec.channels_info);
}
+static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = {
+ { .throughput = 0 * 1024, .blink_time = 334 },
+ { .throughput = 1 * 1024, .blink_time = 260 },
+ { .throughput = 2 * 1024, .blink_time = 220 },
+ { .throughput = 5 * 1024, .blink_time = 190 },
+ { .throughput = 10 * 1024, .blink_time = 170 },
+ { .throughput = 25 * 1024, .blink_time = 150 },
+ { .throughput = 54 * 1024, .blink_time = 130 },
+ { .throughput = 120 * 1024, .blink_time = 110 },
+ { .throughput = 265 * 1024, .blink_time = 80 },
+ { .throughput = 586 * 1024, .blink_time = 50 },
+};
+
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -1174,6 +1187,11 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
#undef RT2X00_TASKLET_INIT
+ ieee80211_create_tpt_led_trigger(rt2x00dev->hw,
+ IEEE80211_TPT_LEDTRIG_FL_RADIO,
+ rt2x00_tpt_blink,
+ ARRAY_SIZE(rt2x00_tpt_blink));
+
/*
* Register HW.
*/
--
2.37.3