From: Ben Greear <[email protected]>
Without this change, garbage is seen in the hwmon name and sensors output
for mt7915 is garbled. It appears that the hwmon logic does not make a
copy of the incoming string, but instead just copies a char* and expects
it to never go away.
Fixes: d6938251bb5b ("mt76: mt7915: add thermal sensor device support")
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
---
v6: Use devm_kasprintf to add a generic prefix "mt7915-" on wiphy name.
Drop an unrelated change.
v5: Use devm_kstrdup on the wiphy name as suggested.
v4: Simplify flow.
v3: Add 'fixes' tag to aid backports.
---
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index acc83e9f409b..f43e4077489b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -160,9 +160,12 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
struct wiphy *wiphy = phy->mt76->hw->wiphy;
struct thermal_cooling_device *cdev;
struct device *hwmon;
+ const char *name;
- cdev = thermal_cooling_device_register(wiphy_name(wiphy), phy,
- &mt7915_thermal_ops);
+ name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7915-%s",
+ wiphy_name(wiphy));
+
+ cdev = thermal_cooling_device_register(name, phy, &mt7915_thermal_ops);
if (!IS_ERR(cdev)) {
if (sysfs_create_link(&wiphy->dev.kobj, &cdev->device.kobj,
"cooling_device") < 0)
@@ -174,8 +177,7 @@ static int mt7915_thermal_init(struct mt7915_phy *phy)
if (!IS_REACHABLE(CONFIG_HWMON))
return 0;
- hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev,
- wiphy_name(wiphy), phy,
+ hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy,
mt7915_hwmon_groups);
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
--
2.29.2