added new macros ATH5K_INFO, ATH5K_WARN and ATH5K_ERR for more consistent
logging inside ath5k. they prepend "ath5k phyX:" to all lines so we can
distinguish between different cards in multi-card setups. ATH5K_WARN and
ATH5K_ERR use net_ratelimit(), so they can be used anywhere without having to
check net_ratelimit() seperately.
the macros get a reference to sc, so we can automatically add additional
information: right now it is used to get the phy name, but having this in one
central place gived us the flexibility to switch to dev_info/warn/... or others
instead too. i think using "phyX" makes the output most readable and easier to
match with the output from mac80211. in cases where we don't have sc available
we still use ATH5K_PRINTF.
changed all printk, most dev_info and most AR5K_PRINTF lines to use these
macros instead. deleted AR5K_PRINT because it's easy to use ATH5K_PRINTF
instead.
for base.c
Changes-licensed-under: 3-clause-BSD
for all others...
Changes-licensed-under: ISC
Signed-off-by: Bruno Randolf <[email protected]>
---
drivers/net/wireless/ath5k/ath5k.h | 23 ++++++++-
drivers/net/wireless/ath5k/base.c | 94 ++++++++++++++++-------------------
drivers/net/wireless/ath5k/hw.c | 78 +++++++++++++++++-------------
drivers/net/wireless/ath5k/phy.c | 31 +++++++-----
4 files changed, 126 insertions(+), 100 deletions(-)
diff --git a/drivers/net/wireless/ath5k/ath5k.h b/drivers/net/wireless/ath5k/ath5k.h
index c5e37d2..1b542f9 100644
--- a/drivers/net/wireless/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath5k/ath5k.h
@@ -69,8 +69,27 @@
GENERIC DRIVER DEFINITIONS
\****************************/
-#define AR5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
-#define AR5K_PRINT(fmt) printk("%s: " fmt, __func__)
+#define ATH5K_PRINTF(fmt, ...) printk("%s: " fmt, __func__, ##__VA_ARGS__)
+
+#define ATH5K_PRINTK(_sc, _level, _fmt, ...) \
+ printk(_level "ath5k %s: " _fmt, \
+ ((_sc) && (_sc)->hw) ? wiphy_name((_sc)->hw->wiphy) : "", \
+ ##__VA_ARGS__)
+
+#define ATH5K_PRINTK_LIMIT(_sc, _level, _fmt, ...) do { \
+ if (net_ratelimit()) \
+ ATH5K_PRINTK(_sc, _level, _fmt, ##__VA_ARGS__); \
+ } while (0)
+
+#define ATH5K_INFO(_sc, _fmt, ...) \
+ ATH5K_PRINTK(_sc, KERN_INFO, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_WARN(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_WARNING, _fmt, ##__VA_ARGS__)
+
+#define ATH5K_ERR(_sc, _fmt, ...) \
+ ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
+
#ifdef AR5K_DEBUG
#define AR5K_TRACE printk(KERN_DEBUG "%s:%d\n", __func__, __LINE__)
#else
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 77e3855..31197a3 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -519,6 +519,8 @@ ath5k_pci_probe(struct pci_dev *pdev,
goto err_map;
}
+ dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
/* Initialize driver private data */
SET_IEEE80211_DEV(hw, &pdev->dev);
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
@@ -554,7 +556,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
/* Setup interrupt handler */
ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (ret) {
- dev_err(&pdev->dev, "request_irq failed\n");
+ ATH5K_ERR(sc, "request_irq failed\n");
goto err_free;
}
@@ -570,7 +572,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
if (ret)
goto err_ah;
- dev_info(&pdev->dev, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
sc->ah->ah_mac_srev,
sc->ah->ah_phy_revision);
@@ -580,27 +582,28 @@ ath5k_pci_probe(struct pci_dev *pdev,
if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
/* No 5GHz support -> report 2GHz radio */
if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
- dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
} else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
- dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
/* Multiband radio */
} else {
- dev_info(&pdev->dev, "RF%s multiband radio found (0x%x)\n",
+ ATH5K_INFO(sc, "RF%s multiband radio found"
+ " (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
}
}
/* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
- dev_info(&pdev->dev, "RF%s 5GHz radio found (0x%x)\n",
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
sc->ah->ah_radio_5ghz_revision);
- dev_info(&pdev->dev, "RF%s 2GHz radio found (0x%x)\n",
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
sc->ah->ah_radio_2ghz_revision);
}
@@ -737,7 +740,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
*/
ret = ath5k_getchannels(hw);
if (ret) {
- dev_err(&pdev->dev, "can't get channels\n");
+ ATH5K_ERR(sc, "can't get channels\n");
goto err;
}
@@ -752,7 +755,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
*/
ret = ath5k_desc_alloc(sc, pdev);
if (ret) {
- dev_err(&pdev->dev, "can't allocate descriptors\n");
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
goto err;
}
@@ -764,14 +767,14 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
*/
ret = ath5k_beaconq_setup(ah);
if (ret < 0) {
- dev_err(&pdev->dev, "can't setup a beacon xmit queue\n");
+ ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
goto err_desc;
}
sc->bhalq = ret;
sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
if (IS_ERR(sc->txq)) {
- dev_err(&pdev->dev, "can't setup xmit queue\n");
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
ret = PTR_ERR(sc->txq);
goto err_bhal;
}
@@ -810,7 +813,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
ret = ieee80211_register_hw(hw);
if (ret) {
- dev_err(&pdev->dev, "can't register ieee80211 hw\n");
+ ATH5K_ERR(sc, "can't register ieee80211 hw\n");
goto err_queues;
}
@@ -944,7 +947,7 @@ ath5k_copy_channels(struct ath5k_hw *ah,
chfreq = CHANNEL_2GHZ;
break;
default:
- printk(KERN_WARNING "bad mode, not copying channels\n");
+ ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
return 0;
}
@@ -998,7 +1001,7 @@ ath5k_register_mode(struct ieee80211_hw *hw, u8 m)
continue;
ret = ieee80211_register_hwmode(hw, &modes[i]);
if (ret) {
- printk(KERN_ERR "can't register hwmode %u\n", m);
+ ATH5K_ERR(sc, "can't register hwmode %u\n", m);
return ret;
}
return 0;
@@ -1094,7 +1097,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
ath5k_rx_stop(sc); /* turn off frame recv */
ret = ath5k_hw_reset(ah, sc->opmode, chan, true);
if (ret) {
- printk(KERN_ERR "%s: unable to reset channel %u "
+ ATH5K_ERR(sc, "%s: unable to reset channel %u "
"(%u Mhz)\n", __func__, chan->chan, chan->freq);
return ret;
}
@@ -1106,7 +1109,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
*/
ret = ath5k_rx_start(sc);
if (ret) {
- printk(KERN_ERR "%s: unable to restart recv logic\n",
+ ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
__func__);
return ret;
}
@@ -1232,7 +1235,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
(ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
if (sc->desc == NULL) {
- dev_err(&pdev->dev, "can't allocate descriptors\n");
+ ATH5K_ERR(sc, "can't allocate descriptors\n");
ret = -ENOMEM;
goto err;
}
@@ -1244,7 +1247,7 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
sizeof(struct ath5k_buf), GFP_KERNEL);
if (bf == NULL) {
- dev_err(&pdev->dev, "can't allocate bufptr\n");
+ ATH5K_ERR(sc, "can't allocate bufptr\n");
ret = -ENOMEM;
goto err_free;
}
@@ -1320,7 +1323,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
*/
skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
if (unlikely(skb == NULL)) {
- printk(KERN_ERR "ath: can't alloc skbuff of size %u\n",
+ ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
sc->rxbufsize + sc->cachelsz - 1);
return -ENOMEM;
}
@@ -1337,7 +1340,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
bf->skbaddr = pci_map_single(sc->pdev,
skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
- printk(KERN_ERR "%s: DMA mapping failed\n", __func__);
+ ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
dev_kfree_skb(skb);
bf->skb = NULL;
return -ENOMEM;
@@ -1482,7 +1485,7 @@ ath5k_txq_setup(struct ath5k_softc *sc,
return ERR_PTR(qnum);
}
if (qnum >= ARRAY_SIZE(sc->txqs)) {
- printk(KERN_ERR "hw qnum %u out of range, max %tu!\n",
+ ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
qnum, ARRAY_SIZE(sc->txqs));
ath5k_hw_release_tx_queue(ah, qnum);
return ERR_PTR(-EINVAL);
@@ -1535,7 +1538,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
if (ret) {
- printk(KERN_ERR "%s: unable to update parameters for beacon "
+ ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
"hardware queue!\n", __func__);
return ret;
}
@@ -1739,8 +1742,7 @@ ath5k_tasklet_rx(unsigned long data)
spin_lock(&sc->rxbuflock);
do {
if (unlikely(list_empty(&sc->rxbuf))) {
- if (net_ratelimit())
- printk(KERN_WARNING "ath: empty rx buf pool\n");
+ ATH5K_WARN(sc, "empty rx buf pool\n");
break;
}
bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
@@ -1759,15 +1761,12 @@ ath5k_tasklet_rx(unsigned long data)
if (unlikely(ret == -EINPROGRESS))
break;
else if (unlikely(ret)) {
- if (net_ratelimit())
- printk(KERN_ERR "ath: error in processing rx "
- "descriptor\n");
+ ATH5K_ERR(sc, "error in processing rx descriptor\n");
return;
}
if (unlikely(ds->ds_rxstat.rs_more)) {
- if (net_ratelimit())
- printk(KERN_INFO "ath: unsupported jumbo\n");
+ ATH5K_WARN(sc, "unsupported jumbo\n");
goto next;
}
@@ -1874,8 +1873,8 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
if (unlikely(ret == -EINPROGRESS))
break;
else if (unlikely(ret)) {
- printk(KERN_ERR "ath: error %d while processing "
- "queue %u\n", ret, txq->qnum);
+ ATH5K_ERR(sc, "error %d while processing queue %u\n",
+ ret, txq->qnum);
break;
}
@@ -1950,7 +1949,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
"skbaddr %llx\n", __func__, skb, skb->data, skb->len,
(unsigned long long)bf->skbaddr);
if (pci_dma_mapping_error(bf->skbaddr)) {
- printk(KERN_ERR "ath: beacon DMA mapping failed\n");
+ ATH5K_ERR(sc, "beacon DMA mapping failed\n");
return -EIO;
}
@@ -2006,8 +2005,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
- printk(KERN_WARNING "ath: bf=%p bf_skb=%p\n", bf,
- bf ? bf->skb : NULL);
+ ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
return;
}
/*
@@ -2043,8 +2041,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
* are still pending on the queue.
*/
if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
- printk(KERN_WARNING "ath: beacon queue %u didn't stop?\n",
- sc->bhalq);
+ ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
/* NB: hw still stops DMA, so proceed */
}
pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
@@ -2184,7 +2181,7 @@ ath5k_init(struct ath5k_softc *sc)
sc->curchan = sc->hw->conf.chan;
ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
if (ret) {
- printk(KERN_ERR "unable to reset hardware: %d\n", ret);
+ ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
goto done;
}
/*
@@ -2376,9 +2373,8 @@ ath5k_intr(int irq, void *dev_id)
}
} while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
- if (unlikely(!counter && net_ratelimit()))
- printk(KERN_WARNING "ath: too many interrupts, giving up for "
- "now\n");
+ if (unlikely(!counter))
+ ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
return IRQ_HANDLED;
}
@@ -2419,7 +2415,7 @@ ath5k_calibrate(unsigned long data)
ath5k_reset(sc->hw);
}
if (ath5k_hw_phy_calibrate(ah, sc->curchan))
- printk(KERN_ERR "ath: calibration of channel %u failed\n",
+ ATH5K_ERR(sc, "calibration of channel %u failed\n",
sc->curchan->chan);
mod_timer(&sc->calib_tim, round_jiffies(jiffies +
@@ -2510,10 +2506,8 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
if (hdrlen & 3) {
pad = hdrlen % 4;
if (skb_headroom(skb) < pad) {
- if (net_ratelimit())
- printk(KERN_ERR "ath: tx hdrlen not %%4: %d "
- "not enough headroom to pad %d\n",
- hdrlen, pad);
+ ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
+ " headroom to pad %d\n", hdrlen, pad);
return -1;
}
skb_push(skb, pad);
@@ -2524,9 +2518,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
spin_lock_irqsave(&sc->txbuflock, flags);
if (list_empty(&sc->txbuf)) {
- if (net_ratelimit())
- printk(KERN_ERR "ath: no further txbuf available, "
- "dropping packet\n");
+ ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
spin_unlock_irqrestore(&sc->txbuflock, flags);
ieee80211_stop_queue(hw, ctl->queue);
return -1;
@@ -2573,14 +2565,14 @@ ath5k_reset(struct ieee80211_hw *hw)
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
if (unlikely(ret)) {
- printk(KERN_ERR "ath: can't reset hardware (%d)\n", ret);
+ ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
}
ath5k_update_txpow(sc);
ret = ath5k_rx_start(sc);
if (unlikely(ret)) {
- printk(KERN_ERR "ath: can't start recv logic\n");
+ ATH5K_ERR(sc, "can't start recv logic\n");
goto err;
}
/*
@@ -2845,7 +2837,7 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
case SET_KEY:
ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
if (ret) {
- printk(KERN_ERR "ath: can't set the key\n");
+ ATH5K_ERR(sc, "can't set the key\n");
goto unlock;
}
__set_bit(key->keyidx, sc->keymap);
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 4aca069..0cdc195 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -128,7 +128,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
if (ah == NULL) {
ret = -ENOMEM;
- AR5K_PRINT("out of memory\n");
+ ATH5K_ERR(sc, "out of memory\n");
goto err;
}
@@ -203,14 +203,14 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
/* Return on unsuported chips (unsupported eeprom etc) */
if(srev >= AR5K_SREV_VER_AR5416){
- printk(KERN_ERR "ath5k: Device not yet supported.\n");
+ ATH5K_ERR(sc, "Device not yet supported.\n");
ret = -ENODEV;
goto err_free;
}
/* Warn for partially supported chips (unsupported phy etc) */
if(srev >= AR5K_SREV_VER_AR2424){
- printk(KERN_DEBUG "ath5k: Device partially supported.\n");
+ ATH5K_WARN(sc, "Device only partially supported.\n");
}
/* Identify single chip solutions */
@@ -248,14 +248,14 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
ret = ath5k_eeprom_init(ah);
if (ret) {
- AR5K_PRINT("unable to init EEPROM\n");
+ ATH5K_ERR(sc, "unable to init EEPROM\n");
goto err_free;
}
/* Get misc capabilities */
ret = ath5k_hw_get_capabilities(ah);
if (ret) {
- AR5K_PRINTF("unable to get device capabilities: 0x%04x\n",
+ ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
sc->pdev->device);
goto err_free;
}
@@ -263,7 +263,7 @@ struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
/* Get MAC address */
ret = ath5k_eeprom_read_mac(ah, mac);
if (ret) {
- AR5K_PRINTF("unable to read address from EEPROM: 0x%04x\n",
+ ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
sc->pdev->device);
goto err_free;
}
@@ -328,7 +328,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
else
mode |= AR5K_PHY_MODE_MOD_DYN;
} else {
- AR5K_PRINT("invalid radio modulation mode\n");
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
return -EINVAL;
}
} else if (flags & CHANNEL_5GHZ) {
@@ -338,11 +339,12 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
if (flags & CHANNEL_OFDM)
mode |= AR5K_PHY_MODE_MOD_OFDM;
else {
- AR5K_PRINT("invalid radio modulation mode\n");
+ ATH5K_ERR(ah->ah_sc,
+ "invalid radio modulation mode\n");
return -EINVAL;
}
} else {
- AR5K_PRINT("invalid radio frequency mode\n");
+ ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
return -EINVAL;
}
@@ -352,7 +354,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
if (initial == true) {
/* ...reset hardware */
if (ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCI)) {
- AR5K_PRINT("failed to reset the PCI chipset\n");
+ ATH5K_ERR(ah->ah_sc,
+ "failed to reset the PCI chipset\n");
return -EIO;
}
@@ -362,7 +365,7 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/* ...wakeup */
ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
- AR5K_PRINT("failed to resume the MAC Chip\n");
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
return ret;
}
@@ -373,7 +376,8 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/* ...reset chipset */
if (ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_CHIP)) {
- AR5K_PRINT("failed to reset the AR5210 chipset\n");
+ ATH5K_ERR(ah->ah_sc,
+ "failed to reset the AR5210 chipset\n");
return -EIO;
}
@@ -383,7 +387,7 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/* ...reset chipset and PCI device */
if (ah->ah_single_chip == false && ath5k_hw_nic_reset(ah,
AR5K_RESET_CTL_CHIP | AR5K_RESET_CTL_PCI)) {
- AR5K_PRINT("failed to reset the MAC Chip + PCI\n");
+ ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip + PCI\n");
return -EIO;
}
@@ -393,13 +397,13 @@ static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
/* ...wakeup */
ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
- AR5K_PRINT("failed to resume the MAC Chip\n");
+ ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
return ret;
}
/* ...final warm reset */
if (ath5k_hw_nic_reset(ah, 0)) {
- AR5K_PRINT("failed to warm reset the MAC Chip\n");
+ ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
return -EIO;
}
@@ -643,7 +647,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
if (ah->ah_radio != AR5K_RF5111 &&
ah->ah_radio != AR5K_RF5112 &&
ah->ah_radio != AR5K_RF5413) {
- AR5K_PRINTF("invalid phy radio: %u\n", ah->ah_radio);
+ ATH5K_ERR(ah->ah_sc,
+ "invalid phy radio: %u\n", ah->ah_radio);
return -EINVAL;
}
@@ -681,7 +686,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
break;
case CHANNEL_XR:
if (ah->ah_version == AR5K_AR5211) {
- AR5K_PRINTF("XR mode not available on 5211");
+ ATH5K_ERR(ah->ah_sc,
+ "XR mode not available on 5211");
return -EINVAL;
}
mode = AR5K_INI_VAL_XR;
@@ -690,7 +696,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
driver_mode = MODE_IEEE80211A;
break;
default:
- AR5K_PRINTF("invalid channel: %d\n", channel->freq);
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->freq);
return -EINVAL;
}
@@ -905,7 +912,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_CAL, 0, false)) {
- AR5K_PRINTF("calibration timeout (%uMHz)\n", channel->freq);
+ ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+ channel->freq);
return -EAGAIN;
}
@@ -917,8 +925,9 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_NF, 0, false)) {
- AR5K_PRINTF("noise floor calibration timeout (%uMHz)\n",
- channel->freq);
+ ATH5K_ERR(ah->ah_sc,
+ "noise floor calibration timeout (%uMHz)\n",
+ channel->freq);
return -EAGAIN;
}
@@ -935,7 +944,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
}
if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
- AR5K_PRINTF("noise floor calibration failed (%uMHz)\n",
+ ATH5K_ERR(ah->ah_sc,
+ "noise floor calibration failed (%uMHz)\n",
channel->freq);
return -EIO;
}
@@ -962,7 +972,8 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
ret = ath5k_hw_reset_tx_queue(ah, i);
if (ret) {
- AR5K_PRINTF("failed to reset TX queue #%d\n", i);
+ ATH5K_ERR(ah->ah_sc,
+ "failed to reset TX queue #%d\n", i);
return ret;
}
}
@@ -1504,7 +1515,7 @@ int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
* print the register value.
*/
if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
- AR5K_PRINTF("0x%08x\n", data);
+ ATH5K_PRINTF("0x%08x\n", data);
return 0;
}
@@ -1645,7 +1656,7 @@ static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data)
udelay(15);
}
#endif
- AR5K_PRINTF("EEPROM Write is disabled!");
+ ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
return -EIO;
}
@@ -1856,7 +1867,7 @@ static int ath5k_eeprom_init(struct ath5k_hw *ah)
cksum ^= val;
}
if (cksum != AR5K_EEPROM_INFO_CKSUM) {
- AR5K_PRINTF("Invalid EEPROM checksum 0x%04x\n", cksum);
+ ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
return -EIO;
}
#endif
@@ -3092,8 +3103,9 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
break;
case AR5K_TX_QUEUE_XR_DATA:
if (ah->ah_version != AR5K_AR5212)
- AR5K_PRINTF("XR data queues only supported in "
- "5212!\n");
+ ATH5K_ERR(ah->ah_sc,
+ "XR data queues only supported in"
+ " 5212!\n");
queue = AR5K_TX_QUEUE_ID_XR_DATA;
break;
default:
@@ -4232,9 +4244,9 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
{
#ifdef AR5K_DEBUG
#define AR5K_PRINT_REGISTER(_x) \
- AR5K_PRINTF("(%s: %08x) ", #_x, ath5k_hw_reg_read(ah, AR5K_##_x));
+ ATH5K_PRINTF("(%s: %08x) ", #_x, ath5k_hw_reg_read(ah, AR5K_##_x));
- AR5K_PRINT("MAC registers:\n");
+ ATH5K_PRINTF("MAC registers:\n");
AR5K_PRINT_REGISTER(CR);
AR5K_PRINT_REGISTER(CFG);
AR5K_PRINT_REGISTER(IER);
@@ -4302,9 +4314,9 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
AR5K_PRINT_REGISTER(FCS_FAIL);
AR5K_PRINT_REGISTER(BEACON_CNT);
AR5K_PRINT_REGISTER(TSF_PARM);
- AR5K_PRINT("\n");
+ ATH5K_PRINTF("\n");
- AR5K_PRINT("PHY registers:\n");
+ ATH5K_PRINTF("PHY registers:\n");
AR5K_PRINT_REGISTER(PHY_TURBO);
AR5K_PRINT_REGISTER(PHY_AGC);
AR5K_PRINT_REGISTER(PHY_TIMING_3);
@@ -4322,7 +4334,7 @@ ath5k_hw_dump_state(struct ath5k_hw *ah)
AR5K_PRINT_REGISTER(PHY_RADAR);
AR5K_PRINT_REGISTER(PHY_ANT_SWITCH_TABLE_0);
AR5K_PRINT_REGISTER(PHY_ANT_SWITCH_TABLE_1);
- AR5K_PRINT("\n");
+ ATH5K_PRINTF("\n");
#endif
}
diff --git a/drivers/net/wireless/ath5k/phy.c b/drivers/net/wireless/ath5k/phy.c
index d5aec18..a4968b6 100644
--- a/drivers/net/wireless/ath5k/phy.c
+++ b/drivers/net/wireless/ath5k/phy.c
@@ -23,6 +23,7 @@
#include "ath5k.h"
#include "reg.h"
+#include "base.h"
/* Struct to hold initial RF register values (RF Banks) */
struct ath5k_ini_rf {
@@ -719,7 +720,7 @@ static unsigned int ath5k_hw_rfregs_op(u32 *rf, u32 offset, u32 reg, u32 bits,
return 0;
if (!(col <= 3 && bits <= 32 && first + bits <= 319)) {
- AR5K_PRINTF("invalid values at offset %u\n", offset);
+ ATH5K_PRINTF("invalid values at offset %u\n", offset);
return 0;
}
@@ -880,11 +881,10 @@ static s32 ath5k_hw_rfregs_gain_adjust(struct ath5k_hw *ah)
done:
#ifdef AR5K_DEBUG
- AR5K_PRINTF("ret %d, gain step %u, current gain %u, target gain %u\n",
+ ATH5K_PRINTF("ret %d, gain step %u, current gain %u, target gain %u\n",
ret, ah->ah_gain.g_step_idx, ah->ah_gain.g_current,
ah->ah_gain.g_target);
#endif
-
return ret;
}
@@ -908,7 +908,7 @@ static int ath5k_hw_rf5111_rfregs(struct ath5k_hw *ah,
/* Copy values to modify them */
for (i = 0; i < rf_size; i++) {
if (rfregs_5111[i].rf_bank >= AR5K_RF5111_INI_RF_MAX_BANKS) {
- AR5K_PRINT("invalid bank\n");
+ ATH5K_ERR(ah->ah_sc, "invalid bank\n");
return -EINVAL;
}
@@ -1017,7 +1017,7 @@ static int ath5k_hw_rf5112_rfregs(struct ath5k_hw *ah,
/* Copy values to modify them */
for (i = 0; i < rf_size; i++) {
if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
- AR5K_PRINT("invalid bank\n");
+ ATH5K_ERR(ah->ah_sc, "invalid bank\n");
return -EINVAL;
}
@@ -1105,7 +1105,7 @@ static int ath5k_hw_rf5413_rfregs(struct ath5k_hw *ah,
/* Copy values to modify them */
for (i = 0; i < rf_size; i++) {
if (rf_ini[i].rf_bank >= AR5K_RF5112_INI_RF_MAX_BANKS) {
- AR5K_PRINT("invalid bank\n");
+ ATH5K_ERR(ah->ah_sc, "invalid bank\n");
return -EINVAL;
}
@@ -1167,7 +1167,7 @@ int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel,
/* XXX do extra checks? */
ah->ah_rf_banks = kmalloc(ah->ah_rf_banks_size, GFP_KERNEL);
if (ah->ah_rf_banks == NULL) {
- AR5K_PRINT("out of memory\n");
+ ATH5K_ERR(ah->ah_sc, "out of memory\n");
return -ENOMEM;
}
}
@@ -1484,7 +1484,8 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
channel->freq > ah->ah_capabilities.cap_range.range_2ghz_max) &&
(channel->freq < ah->ah_capabilities.cap_range.range_5ghz_min ||
channel->freq > ah->ah_capabilities.cap_range.range_5ghz_max)) {
- AR5K_PRINTF("channel out of supported range (%u MHz)\n",
+ ATH5K_ERR(ah->ah_sc,
+ "channel out of supported range (%u MHz)\n",
channel->freq);
return -EINVAL;
}
@@ -1605,7 +1606,8 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
ath5k_hw_reg_write(ah, phy_sat, AR5K_PHY_ADCSAT);
if (ret) {
- AR5K_PRINTF("calibration timeout (%uMHz)\n", channel->freq);
+ ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+ channel->freq);
return ret;
}
@@ -1617,8 +1619,9 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
AR5K_PHY_AGCCTL_NF, 0, false);
if (ret) {
- AR5K_PRINTF("noise floor calibration timeout (%uMHz)\n",
- channel->freq);
+ ATH5K_ERR(ah->ah_sc,
+ "noise floor calibration timeout (%uMHz)\n",
+ channel->freq);
return ret;
}
@@ -1635,7 +1638,7 @@ static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
}
if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
- AR5K_PRINTF("noise floor calibration failed (%uMHz)\n",
+ ATH5K_ERR(ah->ah_sc, "noise floor calibration failed (%uMHz)\n",
channel->freq);
return -EIO;
}
@@ -1847,7 +1850,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
AR5K_TRACE;
if (txpower > AR5K_TUNE_MAX_TXPOWER) {
- AR5K_PRINTF("invalid tx power: %u\n", txpower);
+ ATH5K_ERR(ah->ah_sc, "invalid tx power: %u\n", txpower);
return -EINVAL;
}
@@ -1901,7 +1904,7 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
AR5K_TRACE;
#ifdef AR5K_DEBUG
- AR5K_PRINTF("changing txpower to %d\n", power);
+ ATH5K_PRINTF("changing txpower to %d\n", power);
#endif
return ath5k_hw_txpower(ah, channel, power);
}
--
1.5.3.4
On Nov 21, 2007 4:07 AM, Bruno Randolf <[email protected]> wrote:
> added new macros ATH5K_INFO, ATH5K_WARN and ATH5K_ERR for more consistent
> logging inside ath5k. they prepend "ath5k phyX:" to all lines so we can
> distinguish between different cards in multi-card setups. ATH5K_WARN and
> ATH5K_ERR use net_ratelimit(), so they can be used anywhere without having to
> check net_ratelimit() seperately.
>
> the macros get a reference to sc, so we can automatically add additional
> information: right now it is used to get the phy name, but having this in one
> central place gived us the flexibility to switch to dev_info/warn/... or others
> instead too. i think using "phyX" makes the output most readable and easier to
> match with the output from mac80211. in cases where we don't have sc available
> we still use ATH5K_PRINTF.
>
> changed all printk, most dev_info and most AR5K_PRINTF lines to use these
> macros instead. deleted AR5K_PRINT because it's easy to use ATH5K_PRINTF
> instead.
>
> for base.c
> Changes-licensed-under: 3-clause-BSD
>
> for all others...
> Changes-licensed-under: ISC
>
> Signed-off-by: Bruno Randolf <[email protected]>
Thanks for splitting this. I believe you missed some notes I made in
the previous e-mail. The boring legal notes are specially important.
Luis