The two important features coded in mesh.c are:
Recently Multicast Cache: in on-demand HWMP, multicast traffic is retransmitted
by every receiving node. Even though a mesh TTL counter avoids infinite loops,
it is also necessary to avoid traffic explosion by keeping a cache of multicast
mesh frame that have been received recently. With this feature, maximum number
of retransmissions of a multicast frame for the case of N nodes within the range
of each other would be N. Without it, the maximum number of retransmissions
would be in the order of N^(MESH_TTL - 1).
Code to support mesh tables.
Signed-off-by: Luis Carlos Cobo <[email protected]>
---
net/mac80211/mesh.c | 373 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 373 insertions(+), 0 deletions(-)
create mode 100644 net/mac80211/mesh.c
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
new file mode 100644
index 0000000..36005e8
--- /dev/null
+++ b/net/mac80211/mesh.c
@@ -0,0 +1,373 @@
+/*
+ * Copyright (c) 2008 open80211s Ltd.
+ * Authors: Luis Carlos Cobo <[email protected]>
+ * Javier Cardona <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ieee80211_i.h"
+#include "mesh.h"
+
+#define PP_OFFSET 1 /* Path Selection Protocol */
+#define PM_OFFSET 5 /* Path Selection Metric */
+#define CC_OFFSET 9 /* Congestion Control Mode */
+#define CAPAB_OFFSET 17
+#define ACCEPT_PLINKS 0x80
+
+int mesh_allocated;
+static struct kmem_cache *rm_cache;
+
+void ieee80211s_init(void)
+{
+ mesh_pathtbl_init();
+ mesh_allocated = 1;
+ rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
+ 0, 0, NULL);
+}
+
+void ieee80211s_stop(void)
+{
+ mesh_pathtbl_unregister();
+ kmem_cache_destroy(rm_cache);
+}
+
+/**
+ * mesh_matches_local - check if the config of a mesh point matches ours
+ *
+ * @ie: information elements of a management frame from the mesh peer
+ * @dev: local mesh interface
+ *
+ * This function checks if the mesh configuration of a mesh point matches the
+ * local mesh configuration, i.e. if both nodes belong to the same mesh network.
+ */
+bool mesh_matches_local(struct ieee802_11_elems *ie, struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_if_sta *sta = &sdata->u.sta;
+
+ if (sta->mesh_id_len == ie->mesh_id_len &&
+ memcmp(sta->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
+ memcmp(sta->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
+ memcmp(sta->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
+ memcmp(sta->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0)
+ /*
+ * As support for each feature is added, check for matching
+ * - On mesh config capabilities
+ * - Power Save Support En
+ * - Sync support enabled
+ * - Sync support active
+ * - Sync support required from peer
+ * - MDA enabled
+ * - Power management control on fc
+ */
+ return true;
+
+ return false;
+}
+
+/**
+ * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
+ *
+ * @ie: information elements of a management frame from the mesh peer
+ * @dev: local mesh interface
+ */
+bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie,
+ struct net_device *dev)
+{
+ return (*(ie->mesh_config + CAPAB_OFFSET) & ACCEPT_PLINKS) != 0;
+}
+
+/**
+ * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
+ *
+ * @dev: mesh interface in which mesh beacons are going to be updated
+ */
+void mesh_accept_plinks_update(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ bool free_plinks;
+
+ /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
+ * the mesh interface might be able to establish plinks with peers that
+ * are already on the table but are not on ESTAB state. However, in
+ * general the mesh interface is not accepting peer link requests from
+ * new peers, and that must be reflected in the beacon
+ */
+ free_plinks = mesh_plink_availables(sdata);
+
+ if (free_plinks != sdata->u.sta.accepting_plinks)
+ ieee80211_sta_timer((unsigned long) sdata);
+}
+
+void mesh_ids_set_default(struct ieee80211_if_sta *sta)
+{
+ u8 def_id[4] = {0x00, 0x0F, 0xAC, 0xff};
+
+ memcpy(sta->mesh_pp_id, def_id, 4);
+ memcpy(sta->mesh_pm_id, def_id, 4);
+ memcpy(sta->mesh_cc_id, def_id, 4);
+}
+
+int mesh_rmc_init(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ int i;
+
+ sdata->u.sta.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
+ if (!sdata->u.sta.rmc)
+ return -ENOMEM;
+ sdata->u.sta.rmc->idx_mask = RMC_BUCKETS - 1;
+ for (i = 0; i < RMC_BUCKETS; i++)
+ INIT_LIST_HEAD(&sdata->u.sta.rmc->bucket[i].list);
+ return 0;
+}
+
+void mesh_rmc_free(struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct mesh_rmc *rmc = sdata->u.sta.rmc;
+ struct rmc_entry *p, *n;
+ int i;
+
+ if (!sdata->u.sta.rmc)
+ return;
+
+ for (i = 0; i < RMC_BUCKETS; i++)
+ list_for_each_entry_safe(p, n, &rmc->bucket[i].list, list) {
+ list_del(&p->list);
+ kmem_cache_free(rm_cache, p);
+ }
+
+ kfree(rmc);
+ sdata->u.sta.rmc = NULL;
+}
+
+/**
+ * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
+ *
+ * @sa: source address
+ * @mesh_hdr: mesh_header
+ *
+ * Returns: 0 if the frame is not in the cache, nonzero otherwise.
+ *
+ * Checks using the source address and the mesh sequence number if we have
+ * received this frame lately. If the frame is not in the cache, it is added to
+ * it.
+ */
+int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
+ struct net_device *dev)
+{
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct mesh_rmc *rmc = sdata->u.sta.rmc;
+ u32 seqnum = 0;
+ int entries = 0;
+ u8 idx;
+ struct rmc_entry *p, *n;
+
+ /* Don't care about endianness since only match matters */
+ memcpy(&seqnum, mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
+ idx = mesh_hdr->seqnum[0] & rmc->idx_mask;
+ list_for_each_entry_safe(p, n, &rmc->bucket[idx].list, list) {
+ ++entries;
+ if (time_after(jiffies, p->exp_time) ||
+ (entries == RMC_QUEUE_MAX_LEN)) {
+ list_del(&p->list);
+ kmem_cache_free(rm_cache, p);
+ --entries;
+ } else if ((seqnum == p->seqnum)
+ && (memcmp(sa, p->sa, ETH_ALEN) == 0))
+ return -1;
+ }
+
+ p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
+ if (!p) {
+ printk(KERN_DEBUG "o11s: could not allocate RMC entry\n");
+ return 0;
+ }
+ p->seqnum = seqnum;
+ p->exp_time = jiffies + RMC_TIMEOUT;
+ memcpy(p->sa, sa, ETH_ALEN);
+ list_add(&p->list, &rmc->bucket[idx].list);
+ return 0;
+}
+
+void mesh_mgmt_ies_add(struct sk_buff *skb, struct net_device *dev)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_supported_band *sband;
+ u8 *pos;
+ int len, i, rate;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+ len = sband->n_bitrates;
+ if (len > 8)
+ len = 8;
+ pos = skb_put(skb, len + 2);
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos++ = len;
+ for (i = 0; i < len; i++) {
+ rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+
+ if (sband->n_bitrates > len) {
+ pos = skb_put(skb, sband->n_bitrates - len + 2);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = sband->n_bitrates - len;
+ for (i = len; i < sband->n_bitrates; i++) {
+ rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
+ }
+
+ pos = skb_put(skb, 2 + sdata->u.sta.mesh_id_len);
+ *pos++ = WLAN_EID_MESH_ID;
+ *pos++ = sdata->u.sta.mesh_id_len;
+ if (sdata->u.sta.mesh_id_len)
+ memcpy(pos, sdata->u.sta.mesh_id, sdata->u.sta.mesh_id_len);
+
+ pos = skb_put(skb, 21);
+ *pos++ = WLAN_EID_MESH_CONFIG;
+ *pos++ = MESH_CFG_LEN;
+ /* Version */
+ *pos++ = 1;
+
+ /* Active path selection protocol ID */
+ memcpy(pos, sdata->u.sta.mesh_pp_id, 4);
+ pos += 4;
+
+ /* Active path selection metric ID */
+ memcpy(pos, sdata->u.sta.mesh_pm_id, 4);
+ pos += 4;
+
+ /* Congestion control mode identifier */
+ memcpy(pos, sdata->u.sta.mesh_cc_id, 4);
+ pos += 4;
+
+ /* Channel precedence:
+ * Not running simple channel unification protocol
+ */
+ memset(pos, 0x00, 4);
+ pos += 4;
+
+ /* Mesh capability */
+ sdata->u.sta.accepting_plinks = mesh_plink_availables(sdata);
+ *pos++ = sdata->u.sta.accepting_plinks ? ACCEPT_PLINKS : 0x00;
+ *pos++ = 0x00;
+
+ return;
+}
+
+u32 mesh_table_hash(u8 *addr, struct net_device *dev, struct mesh_table *tbl)
+{
+ /* Use last four bytes of hw addr and interface index as hash index */
+ return jhash_2words(*(u32 *)(addr+2), dev->ifindex, tbl->hash_rnd)
+ & tbl->hash_mask;
+}
+
+u8 mesh_id_hash(u8 *mesh_id, int mesh_id_len)
+{
+ if (!mesh_id_len)
+ return 1;
+ else if (mesh_id_len == 1)
+ return (u8) mesh_id[0];
+ else
+ return (u8) (mesh_id[0] + 2 * mesh_id[1]);
+}
+
+struct mesh_table *mesh_table_alloc(int size_order)
+{
+ int i;
+ struct mesh_table *newtbl;
+
+ newtbl = kmalloc(sizeof(struct mesh_table), GFP_KERNEL);
+ if (!newtbl)
+ return NULL;
+
+ newtbl->hash_buckets = kzalloc(sizeof(struct hlist_head) *
+ (1 << size_order), GFP_KERNEL);
+
+ if (!newtbl->hash_buckets) {
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->hashwlock = kmalloc(sizeof(spinlock_t) *
+ (1 << size_order), GFP_KERNEL);
+ if (!newtbl->hashwlock) {
+ kfree(newtbl->hash_buckets);
+ kfree(newtbl);
+ return NULL;
+ }
+
+ newtbl->size_order = size_order;
+ newtbl->hash_mask = (1 << size_order) - 1;
+ atomic_set(&newtbl->entries, 0);
+ get_random_bytes(&newtbl->hash_rnd,
+ sizeof(newtbl->hash_rnd));
+ for (i = 0; i <= newtbl->hash_mask; i++)
+ spin_lock_init(&newtbl->hashwlock[i]);
+
+ return newtbl;
+}
+
+void mesh_table_free(struct mesh_table *tbl, bool free_leafs)
+{
+ struct hlist_head *mesh_hash;
+ struct hlist_node *p, *q;
+ int i;
+
+ mesh_hash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++) {
+ spin_lock(&tbl->hashwlock[i]);
+ hlist_for_each_safe(p, q, &mesh_hash[i]) {
+ tbl->free_node(p, free_leafs);
+ atomic_dec(&tbl->entries);
+ }
+ spin_unlock(&tbl->hashwlock[i]);
+ }
+ kfree(tbl->hash_buckets);
+ kfree(tbl->hashwlock);
+ kfree(tbl);
+}
+
+struct mesh_table *mesh_table_grow(struct mesh_table *tbl)
+{
+ struct mesh_table *newtbl;
+ struct hlist_head *oldhash;
+ struct hlist_node *p;
+ int err = 0;
+ int i;
+
+ if (atomic_read(&tbl->entries)
+ < tbl->mean_chain_len * (tbl->hash_mask + 1)) {
+ err = -EPERM;
+ goto endgrow;
+ }
+
+ newtbl = mesh_table_alloc(tbl->size_order + 1);
+ if (!newtbl) {
+ err = -ENOMEM;
+ goto endgrow;
+ }
+
+ newtbl->free_node = tbl->free_node;
+ newtbl->mean_chain_len = tbl->mean_chain_len;
+ newtbl->copy_node = tbl->copy_node;
+ atomic_set(&newtbl->entries, atomic_read(&tbl->entries));
+
+ oldhash = tbl->hash_buckets;
+ for (i = 0; i <= tbl->hash_mask; i++)
+ hlist_for_each(p, &oldhash[i])
+ tbl->copy_node(p, newtbl);
+
+endgrow:
+ if (err)
+ return NULL;
+ else
+ return newtbl;
+}
--
1.5.2.5
> + if (sta->mesh_id_len == ie->mesh_id_len &&
> + memcmp(sta->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
> + memcmp(sta->mesh_pp_id, ie->mesh_config + PP_OFFSET, 4) == 0 &&
> + memcmp(sta->mesh_pm_id, ie->mesh_config + PM_OFFSET, 4) == 0 &&
> + memcmp(sta->mesh_cc_id, ie->mesh_config + CC_OFFSET, 4) == 0)
> + /*
> + * As support for each feature is added, check for matching
> + * - On mesh config capabilities
> + * - Power Save Support En
> + * - Sync support enabled
> + * - Sync support active
> + * - Sync support required from peer
> + * - MDA enabled
> + * - Power management control on fc
> + */
> + return true;
Can the comment be before the if please?
johannes
On Fri, 2008-02-22 at 17:25 +0100, Johannes Berg wrote:
> > + * - Sync support required from peer
> > + * - MDA enabled
> > + * - Power management control on fc
> > + */
> > + return true;
>
> Can the comment be before the if please?
Ok, will make a patch when the series you submitted make it to wireless
testing.
--
Luis Carlos Cobo Rus GnuPG ID: 44019B60
cozybit Inc.