John,
A few fixes and cleanup. Could you please send the first patch to 2.6.30
also? Patches 2 to 4 are waited upon and also address the "iwl3945
registration regression" reported in
http://marc.info/?l=linux-wireless&m=123925660426062&w=2 and applies on top
of the fix that Johannes posted for it there
(http://marc.info/?l=linux-wireless&m=123926378000661&w=2 ).
[PATCH 01/11] iwlwifi: fix EEPROM validation mask to include OTP only devices
[PATCH 02/11] iwlwifi: rename PROBE_OPTION_MAX_API1 to PROBE_OPTION_MAX_3945
[PATCH 03/11] iwlwifi: improve scan support
[PATCH 04/11] iwlwifi: support truly passive scanning
[PATCH 05/11] iwl3945: add debugfs to 3945
[PATCH 06/11] iwl3945: calculate debugfs isr statistics
[PATCH 07/11] iwlwifi: clean up unused NL80211_IFTYPE_MONITOR for Monitor mode
[PATCH 08/11] iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
[PATCH 09/11] iwlcore: Fix stay in table function.
[PATCH 10/11] iwlwifi: remove radio disable parameter.
[PATCH 11/11] iwlwifi: allow config if device not ready
Thank you
Reinette
From: Mohamed Abbas <[email protected]>
Function rs_stay_in_table was flushing the rate scale table way to early. time_after
macro in expecting long value and was failing because we passing u32 value.
Signed-off-by: Mohamed Abbas <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 26 ++++++++++----------------
1 files changed, 10 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 98b6b37..3504279 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -52,7 +52,7 @@
/* max allowed rate miss before sync LQ cmd */
#define IWL_MISSED_RATE_MAX 15
/* max time to accum history 2 seconds */
-#define IWL_RATE_SCALE_FLUSH_INTVL (2*HZ)
+#define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ)
static u8 rs_ht_to_legacy[] = {
IWL_RATE_6M_INDEX, IWL_RATE_6M_INDEX,
@@ -135,7 +135,7 @@ struct iwl_lq_sta {
u32 table_count;
u32 total_failed; /* total failed frames, any/all rates */
u32 total_success; /* total successful frames, any/all rates */
- u32 flush_timer; /* time staying in mode before new search */
+ u64 flush_timer; /* time staying in mode before new search */
u8 action_counter; /* # mode-switch actions tried */
u8 is_green;
@@ -1025,6 +1025,7 @@ static void rs_set_stay_in_table(struct iwl_priv *priv, u8 is_legacy,
lq_sta->table_count = 0;
lq_sta->total_failed = 0;
lq_sta->total_success = 0;
+ lq_sta->flush_timer = jiffies;
}
/*
@@ -1914,8 +1915,8 @@ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta)
/* Elapsed time using current modulation mode */
if (lq_sta->flush_timer)
flush_interval_passed =
- time_after(jiffies,
- (unsigned long)(lq_sta->flush_timer +
+ time_after(jiffies,
+ (unsigned long)(lq_sta->flush_timer +
IWL_RATE_SCALE_FLUSH_INTVL));
/*
@@ -2249,6 +2250,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
update_lq = 1;
index = low;
}
+
break;
case 1:
/* Increase starting rate, update uCode's rate table */
@@ -2314,8 +2316,11 @@ lq_update:
tbl->current_rate, index);
rs_fill_link_cmd(priv, lq_sta, tbl->current_rate);
iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
- }
+ } else
+ done_search = 1;
+ }
+ if (done_search && !lq_sta->stay_in_tbl) {
/* If the "active" (non-search) mode was legacy,
* and we've tried switching antennas,
* but we haven't been able to try HT modes (not available),
@@ -2350,17 +2355,6 @@ lq_update:
lq_sta->action_counter = 0;
rs_set_stay_in_table(priv, 0, lq_sta);
}
-
- /*
- * Else, don't search for a new modulation mode.
- * Put new timestamp in stay-in-modulation-mode flush timer if:
- * 1) Not changing rates right now
- * 2) Not just finishing up a search
- * 3) flush timer is empty
- */
- } else {
- if ((!update_lq) && (!done_search) && (!lq_sta->flush_timer))
- lq_sta->flush_timer = jiffies;
}
out:
--
1.5.6.3
From: Abhijeet Kolekar <[email protected]>
Patch adds debugfs to 3945. Also fix debugfs registration in iwlagn
to return error code if it fails.
Signed-off-by: Abhijeet Kolekar <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 ++++++
2 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 12de63e..2751736 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2829,7 +2829,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = iwl_dbgfs_register(priv, DRV_NAME);
if (err)
- IWL_ERR(priv, "failed to create debugfs files\n");
+ IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
/* If platform's RF_KILL switch is NOT set to KILL */
if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 5520a79..4e1331d 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4346,6 +4346,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
if (err)
goto out_remove_sysfs;
+ err = iwl_dbgfs_register(priv, DRV_NAME);
+ if (err)
+ IWL_ERR(priv, "failed to create debugfs files. Ignoring error: %d\n", err);
+
err = iwl_rfkill_init(priv);
if (err)
IWL_ERR(priv, "Unable to initialize RFKILL system. "
@@ -4396,6 +4400,8 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
IWL_DEBUG_INFO(priv, "*** UNLOAD DRIVER ***\n");
+ iwl_dbgfs_unregister(priv);
+
set_bit(STATUS_EXIT_PENDING, &priv->status);
if (priv->mac80211_registered) {
--
1.5.6.3
Users reported lockup with work still trying to run
after module has been unloaded.
http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601
Signed-off-by: Reinette Chatre <[email protected]>
Reported-by: TJ <[email protected]>
Reported-by: Huaxu Wan <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index e22282e..a776326 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4436,7 +4436,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
iwl_rfkill_unregister(priv);
- cancel_delayed_work(&priv->rfkill_poll);
+ cancel_delayed_work_sync(&priv->rfkill_poll);
iwl3945_dealloc_ucode_pci(priv);
--
1.5.6.3
From: Wey-Yi Guy <[email protected]>
This patch clean up the code for NL80211_IFTYPE_MONITOR mode,
priv->iw_mode is set in add_interface, but add_interface is never called
for monitor mode.
The only way mac80211 informs us about monitor mode is through
configuring filter; since iw_mode will never set to
NL80211_IFTYPE_MONITOR, modify and remove all the code refer to
NL80211_IFTYPE_MONITOR and replace with iwl_is_monitor_mode() function
call.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-agn.c | 2 --
drivers/net/wireless/iwlwifi/iwl-core.c | 8 ++------
drivers/net/wireless/iwlwifi/iwl-core.h | 1 +
drivers/net/wireless/iwlwifi/iwl-rx.c | 7 -------
drivers/net/wireless/iwlwifi/iwl-scan.c | 2 +-
drivers/net/wireless/iwlwifi/iwl-sta.c | 5 -----
drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 ++--
8 files changed, 7 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 2751736..fc52d32 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2001,8 +2001,6 @@ static int iwl_mac_start(struct ieee80211_hw *hw)
out:
priv->is_open = 1;
- /* default to MONITOR mode */
- priv->iw_mode = NL80211_IFTYPE_MONITOR;
IWL_DEBUG_MAC80211(priv, "leave\n");
return 0;
}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c43c57d..bf7ad51 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -904,10 +904,11 @@ static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
* never called for monitor mode. The only way mac80211 informs us about
* monitor mode is through configuring filters (call to configure_filter).
*/
-static bool iwl_is_monitor_mode(struct iwl_priv *priv)
+bool iwl_is_monitor_mode(struct iwl_priv *priv)
{
return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK);
}
+EXPORT_SYMBOL(iwl_is_monitor_mode);
/**
* iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
@@ -1071,11 +1072,6 @@ void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode)
RXON_FILTER_ACCEPT_GRP_MSK;
break;
- case NL80211_IFTYPE_MONITOR:
- priv->staging_rxon.dev_type = RXON_DEV_TYPE_SNIFFER;
- priv->staging_rxon.filter_flags = RXON_FILTER_PROMISC_MSK |
- RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_ACCEPT_GRP_MSK;
- break;
default:
IWL_ERR(priv, "Unsupported interface type %d\n", mode);
break;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 8ab60df..3bc2f6c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -267,6 +267,7 @@ int iwl_setup_mac(struct iwl_priv *priv);
int iwl_set_hw_params(struct iwl_priv *priv);
int iwl_init_drv(struct iwl_priv *priv);
void iwl_uninit_drv(struct iwl_priv *priv);
+bool iwl_is_monitor_mode(struct iwl_priv *priv);
void iwl_post_associate(struct iwl_priv *priv);
void iwl_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8f65908..fae8426 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1102,13 +1102,6 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
if (rx_start->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
rx_status.flag |= RX_FLAG_SHORTPRE;
- /* Take shortcut when only in monitor mode */
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR) {
- iwl_pass_packet_to_mac80211(priv, include_phy,
- rxb, &rx_status);
- return;
- }
-
network_packet = iwl_is_network_packet(priv, header);
if (network_packet) {
priv->last_rx_rssi = rx_status.signal;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 25311e1..799f5eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -747,7 +747,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
scan->tx_cmd.len = cpu_to_le16(cmd_len);
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+ if (iwl_is_monitor_mode(priv))
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index b8f18c6..17a4dd2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -1078,11 +1078,6 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
return priv->hw_params.bcast_sta_id;
- /* If we are in monitor mode, use BCAST. This is required for
- * packet injection. */
- case NL80211_IFTYPE_MONITOR:
- return priv->hw_params.bcast_sta_id;
-
default:
IWL_WARN(priv, "Unknown mode of operation: %d\n",
priv->iw_mode);
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index c734c5f..58cdd32 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -728,7 +728,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
/* drop all data frame if we are not associated */
if (ieee80211_is_data(fc) &&
- (priv->iw_mode != NL80211_IFTYPE_MONITOR ||
+ (!iwl_is_monitor_mode(priv) ||
!(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */
(!iwl_is_associated(priv) ||
((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id) ||
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index f4978bd..e22282e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -729,7 +729,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
/* drop all data frame if we are not associated */
if (ieee80211_is_data(fc) &&
- (priv->iw_mode != NL80211_IFTYPE_MONITOR) && /* packet injection */
+ (!iwl_is_monitor_mode(priv)) && /* packet injection */
(!iwl_is_associated(priv) ||
((priv->iw_mode == NL80211_IFTYPE_STATION) && !priv->assoc_id))) {
IWL_DEBUG_DROP(priv, "Dropping - !iwl_is_associated\n");
@@ -3113,7 +3113,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
- if (priv->iw_mode == NL80211_IFTYPE_MONITOR)
+ if (iwl_is_monitor_mode(priv))
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
scan->channel_count =
--
1.5.6.3
John,
Could you please submit this patch to 2.6.30 also?
Thank you
Reinette
On Mon, 2009-04-20 at 14:37 -0700, Chatre, Reinette wrote:
> Users reported lockup with work still trying to run
> after module has been unloaded.
>
> http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601
>
> Signed-off-by: Reinette Chatre <[email protected]>
> Reported-by: TJ <[email protected]>
> Reported-by: Huaxu Wan <[email protected]>
> ---
> drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
> index e22282e..a776326 100644
> --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
> +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
> @@ -4436,7 +4436,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev)
> sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
>
> iwl_rfkill_unregister(priv);
> - cancel_delayed_work(&priv->rfkill_poll);
> + cancel_delayed_work_sync(&priv->rfkill_poll);
>
> iwl3945_dealloc_ucode_pci(priv);
>
From: Johannes Berg <[email protected]>
This modifies iwlwifi to
* no longer build its own probe request, but use mac80211's
* therefore, support arbitrary scan IEs (up to the max len)
* support multiple scan SSIDs
* support passive scanning
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-commands.h | 1 +
drivers/net/wireless/iwlwifi/iwl-core.c | 6 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl-scan.c | 187 +++++---------------------
drivers/net/wireless/iwlwifi/iwl3945-base.c | 48 ++++---
6 files changed, 73 insertions(+), 177 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 411a5d2..7b84d52 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2474,6 +2474,7 @@ struct iwl_ssid_ie {
#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
#define IWL_GOOD_CRC_TH cpu_to_le16(1)
#define IWL_MAX_SCAN_SIZE 1024
+#define IWL_MAX_PROBE_REQUEST 200
/*
* REPLY_SCAN_CMD = 0x80 (command)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index f231752..c43c57d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1309,8 +1309,10 @@ int iwl_setup_mac(struct iwl_priv *priv)
BIT(NL80211_IFTYPE_ADHOC);
hw->wiphy->custom_regulatory = true;
- hw->wiphy->max_scan_ssids = 1;
- hw->wiphy->max_scan_ie_len = 0; /* XXX for now */
+
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 8773d73..8ab60df 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -396,8 +396,8 @@ int iwl_scan_cancel(struct iwl_priv *priv);
int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
int iwl_scan_initiate(struct iwl_priv *priv);
int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req);
-u16 iwl_fill_probe_req(struct iwl_priv *priv, enum ieee80211_band band,
- struct ieee80211_mgmt *frame, int left);
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+ const u8 *ie, int ie_len, int left);
void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
enum ieee80211_band band,
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 0922e33..e363d9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -889,9 +889,7 @@ struct iwl_priv {
unsigned long scan_start_tsf;
void *scan;
int scan_bands;
- int one_direct_scan;
- u8 direct_ssid_len;
- u8 direct_ssid[IW_ESSID_MAX_SIZE];
+ struct cfg80211_scan_request *scan_request;
u8 scan_tx_ant[IEEE80211_NUM_BANDS];
u8 mgmt_tx_ant;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 23644cf..9edcf8c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -448,13 +448,6 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
unsigned long flags;
struct iwl_priv *priv = hw->priv;
int ret;
- u8 *ssid = NULL;
- size_t ssid_len = 0;
-
- if (req->n_ssids) {
- ssid = req->ssids[0].ssid;
- ssid_len = req->ssids[0].ssid_len;
- }
IWL_DEBUG_MAC80211(priv, "enter\n");
@@ -488,13 +481,7 @@ int iwl_mac_hw_scan(struct ieee80211_hw *hw,
goto out_unlock;
}
- if (ssid_len) {
- priv->one_direct_scan = 1;
- priv->direct_ssid_len = ssid_len;
- memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
- } else {
- priv->one_direct_scan = 0;
- }
+ priv->scan_request = req;
ret = iwl_scan_initiate(priv);
@@ -533,73 +520,14 @@ void iwl_bg_scan_check(struct work_struct *data)
EXPORT_SYMBOL(iwl_bg_scan_check);
/**
- * iwl_supported_rate_to_ie - fill in the supported rate in IE field
- *
- * return : set the bit for each supported rate insert in ie
- */
-static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate,
- u16 basic_rate, int *left)
-{
- u16 ret_rates = 0, bit;
- int i;
- u8 *cnt = ie;
- u8 *rates = ie + 1;
-
- for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) {
- if (bit & supported_rate) {
- ret_rates |= bit;
- rates[*cnt] = iwl_rates[i].ieee |
- ((bit & basic_rate) ? 0x80 : 0x00);
- (*cnt)++;
- (*left)--;
- if ((*left <= 0) ||
- (*cnt >= IWL_SUPPORTED_RATES_IE_LEN))
- break;
- }
- }
-
- return ret_rates;
-}
-
-
-static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband,
- u8 *pos, int *left)
-{
- struct ieee80211_ht_cap *ht_cap;
-
- if (!sband || !sband->ht_cap.ht_supported)
- return;
-
- if (*left < sizeof(struct ieee80211_ht_cap))
- return;
-
- *pos++ = sizeof(struct ieee80211_ht_cap);
- ht_cap = (struct ieee80211_ht_cap *) pos;
-
- ht_cap->cap_info = cpu_to_le16(sband->ht_cap.cap);
- memcpy(&ht_cap->mcs, &sband->ht_cap.mcs, 16);
- ht_cap->ampdu_params_info =
- (sband->ht_cap.ampdu_factor & IEEE80211_HT_AMPDU_PARM_FACTOR) |
- ((sband->ht_cap.ampdu_density << 2) &
- IEEE80211_HT_AMPDU_PARM_DENSITY);
- *left -= sizeof(struct ieee80211_ht_cap);
-}
-
-/**
* iwl_fill_probe_req - fill in all required fields and IE for probe request
*/
-u16 iwl_fill_probe_req(struct iwl_priv *priv,
- enum ieee80211_band band,
- struct ieee80211_mgmt *frame,
- int left)
+u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
+ const u8 *ies, int ie_len, int left)
{
int len = 0;
u8 *pos = NULL;
- u16 active_rates, ret_rates, cck_rates, active_rate_basic;
- const struct ieee80211_supported_band *sband =
- iwl_get_hw_mode(priv, band);
-
/* Make sure there is enough space for the probe request,
* two mandatory IEs and the data */
@@ -627,62 +555,12 @@ u16 iwl_fill_probe_req(struct iwl_priv *priv,
len += 2;
- /* fill in supported rate */
- left -= 2;
- if (left < 0)
- return 0;
-
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos = 0;
-
- /* exclude 60M rate */
- active_rates = priv->rates_mask;
- active_rates &= ~IWL_RATE_60M_MASK;
-
- active_rate_basic = active_rates & IWL_BASIC_RATES_MASK;
-
- cck_rates = IWL_CCK_RATES_MASK & active_rates;
- ret_rates = iwl_supported_rate_to_ie(pos, cck_rates,
- active_rate_basic, &left);
- active_rates &= ~ret_rates;
-
- ret_rates = iwl_supported_rate_to_ie(pos, active_rates,
- active_rate_basic, &left);
- active_rates &= ~ret_rates;
+ if (WARN_ON(left < ie_len))
+ return len;
- len += 2 + *pos;
- pos += (*pos) + 1;
-
- if (active_rates == 0)
- goto fill_end;
-
- /* fill in supported extended rate */
- /* ...next IE... */
- left -= 2;
- if (left < 0)
- return 0;
- /* ... fill it in... */
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos = 0;
- iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left);
- if (*pos > 0) {
- len += 2 + *pos;
- pos += (*pos) + 1;
- } else {
- pos--;
- }
-
- fill_end:
-
- left -= 2;
- if (left < 0)
- return 0;
-
- *pos++ = WLAN_EID_HT_CAPABILITY;
- *pos = 0;
- iwl_ht_cap_to_ie(sband, pos, &left);
- if (*pos > 0)
- len += 2 + *pos;
+ memcpy(pos, ies, ie_len);
+ len += ie_len;
+ left -= ie_len;
return (u16)len;
}
@@ -703,10 +581,10 @@ static void iwl_bg_request_scan(struct work_struct *data)
u32 rate_flags = 0;
u16 cmd_len;
enum ieee80211_band band;
- u8 n_probes = 2;
+ u8 n_probes = 0;
u8 rx_chain = priv->hw_params.valid_rx_ant;
u8 rate;
- DECLARE_SSID_BUF(ssid);
+ bool is_active = false;
conf = ieee80211_get_hw_conf(priv->hw);
@@ -796,19 +674,25 @@ static void iwl_bg_request_scan(struct work_struct *data)
scan_suspend_time, interval);
}
- /* We should add the ability for user to lock to PASSIVE ONLY */
- if (priv->one_direct_scan) {
- IWL_DEBUG_SCAN(priv, "Start direct scan for '%s'\n",
- print_ssid(ssid, priv->direct_ssid,
- priv->direct_ssid_len));
- scan->direct_scan[0].id = WLAN_EID_SSID;
- scan->direct_scan[0].len = priv->direct_ssid_len;
- memcpy(scan->direct_scan[0].ssid,
- priv->direct_ssid, priv->direct_ssid_len);
- n_probes++;
- } else {
- IWL_DEBUG_SCAN(priv, "Start indirect scan.\n");
- }
+ if (priv->scan_request->n_ssids) {
+ int i, p = 0;
+ IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+ for (i = 0; i < priv->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!priv->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ priv->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
scan->tx_cmd.sta_id = priv->hw_params.bcast_sta_id;
@@ -850,10 +734,11 @@ static void iwl_bg_request_scan(struct work_struct *data)
cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) |
(rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) |
(0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS));
-
- cmd_len = iwl_fill_probe_req(priv, band,
- (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan));
+ cmd_len = iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan));
scan->tx_cmd.len = cpu_to_le16(cmd_len);
@@ -864,8 +749,7 @@ static void iwl_bg_request_scan(struct work_struct *data)
RXON_FILTER_BCON_AWARE_MSK);
scan->channel_count =
- iwl_get_channels_for_scan(priv, band, 1, /* active */
- n_probes,
+ iwl_get_channels_for_scan(priv, band, is_active, n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
if (scan->channel_count == 0) {
@@ -928,6 +812,7 @@ void iwl_bg_scan_completed(struct work_struct *work)
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
+ priv->scan_request = NULL;
ieee80211_scan_completed(priv->hw, false);
/* Since setting the TXPOWER may have been deferred while
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 5937933..94f10f2 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -2942,9 +2942,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
int rc = 0;
struct iwl3945_scan_cmd *scan;
struct ieee80211_conf *conf = NULL;
- u8 n_probes = 2;
+ u8 n_probes = 0;
enum ieee80211_band band;
- DECLARE_SSID_BUF(ssid);
+ bool is_active = false;
conf = ieee80211_get_hw_conf(priv->hw);
@@ -3043,18 +3043,25 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
scan_suspend_time, interval);
}
- /* We should add the ability for user to lock to PASSIVE ONLY */
- if (priv->one_direct_scan) {
- IWL_DEBUG_SCAN(priv, "Kicking off one direct scan for '%s'\n",
- print_ssid(ssid, priv->direct_ssid,
- priv->direct_ssid_len));
- scan->direct_scan[0].id = WLAN_EID_SSID;
- scan->direct_scan[0].len = priv->direct_ssid_len;
- memcpy(scan->direct_scan[0].ssid,
- priv->direct_ssid, priv->direct_ssid_len);
- n_probes++;
+ if (priv->scan_request->n_ssids) {
+ int i, p = 0;
+ IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
+ for (i = 0; i < priv->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!priv->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ priv->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ priv->scan_request->ssids[i].ssid,
+ priv->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
} else
- IWL_DEBUG_SCAN(priv, "Kicking off one indirect scan.\n");
+ IWL_DEBUG_SCAN(priv, "Kicking off passive scan.\n");
/* We don't build a direct scan probe request; the uCode will do
* that based on the direct_mask added to each channel entry */
@@ -3079,9 +3086,11 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
}
scan->tx_cmd.len = cpu_to_le16(
- iwl_fill_probe_req(priv, band,
- (struct ieee80211_mgmt *)scan->data,
- IWL_MAX_SCAN_SIZE - sizeof(*scan)));
+ iwl_fill_probe_req(priv,
+ (struct ieee80211_mgmt *)scan->data,
+ priv->scan_request->ie,
+ priv->scan_request->ie_len,
+ IWL_MAX_SCAN_SIZE - sizeof(*scan)));
/* select Rx antennas */
scan->flags |= iwl3945_get_antenna_flags(priv);
@@ -3090,8 +3099,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
scan->filter_flags = RXON_FILTER_PROMISC_MSK;
scan->channel_count =
- iwl3945_get_channels_for_scan(priv, band, 1, /* active */
- n_probes,
+ iwl3945_get_channels_for_scan(priv, band, is_active, n_probes,
(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
if (scan->channel_count == 0) {
@@ -4119,7 +4127,9 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
hw->wiphy->custom_regulatory = true;
- hw->wiphy->max_scan_ssids = 1; /* WILL FIX */
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
/* Default value; 4 EDCA QOS priorities */
hw->queues = 4;
--
1.5.6.3
From: Johannes Berg <[email protected]>
If passive scanning is requested we should not ask the
microcode to do active scanning after detecting traffic
on a channel -- that should only be used when an active
scan is requested but some channels are marked passive.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-scan.c | 7 ++++++-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 7 ++++++-
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 9edcf8c..25311e1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -712,7 +712,12 @@ static void iwl_bg_request_scan(struct work_struct *data)
} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
band = IEEE80211_BAND_5GHZ;
rate = IWL_RATE_6M_PLCP;
- scan->good_CRC_th = IWL_GOOD_CRC_TH;
+ /*
+ * If active scaning is requested but a certain channel
+ * is marked passive, we can do active scanning if we
+ * detect transmissions.
+ */
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
/* Force use of chains B and C (0x6) for scan Rx for 4965
* Avoid A (0x1) because of its off-channel reception on A-band.
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 94f10f2..5520a79 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3078,7 +3078,12 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
band = IEEE80211_BAND_2GHZ;
} else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) {
scan->tx_cmd.rate = IWL_RATE_6M_PLCP;
- scan->good_CRC_th = IWL_GOOD_CRC_TH;
+ /*
+ * If active scaning is requested but a certain channel
+ * is marked passive, we can do active scanning if we
+ * detect transmissions.
+ */
+ scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0;
band = IEEE80211_BAND_5GHZ;
} else {
IWL_WARN(priv, "Invalid scan band count\n");
--
1.5.6.3
From: Abhijeet Kolekar <[email protected]>
This patch calculates interrupt statistics for debugfs.
Signed-off-by: Abhijeet Kolekar <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl3945-base.c | 19 ++++++++++++++++---
1 files changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 4e1331d..f4978bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1543,6 +1543,7 @@ static void iwl3945_rx_handle(struct iwl_priv *priv)
"r = %d, i = %d, %s, 0x%02x\n", r, i,
get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
+ priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
} else {
/* No handling needed */
IWL_DEBUG(priv, IWL_DL_HCMD | IWL_DL_RX | IWL_DL_ISR,
@@ -1845,6 +1846,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
/* Tell the device to stop sending interrupts */
iwl_disable_interrupts(priv);
+ priv->isr_stats.hw++;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_HW_ERR;
@@ -1857,13 +1859,17 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
#ifdef CONFIG_IWLWIFI_DEBUG
if (priv->debug_level & (IWL_DL_ISR)) {
/* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD)
+ if (inta & CSR_INT_BIT_SCD) {
IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
"the frame/frames.\n");
+ priv->isr_stats.sch++;
+ }
/* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE)
+ if (inta & CSR_INT_BIT_ALIVE) {
IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+ priv->isr_stats.alive++;
+ }
}
#endif
/* Safely ignore these bits for debug checks below */
@@ -1873,6 +1879,8 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
if (inta & CSR_INT_BIT_SW_ERR) {
IWL_ERR(priv, "Microcode SW error detected. "
"Restarting 0x%X.\n", inta);
+ priv->isr_stats.sw++;
+ priv->isr_stats.sw_err = inta;
iwl_irq_handle_error(priv);
handled |= CSR_INT_BIT_SW_ERR;
}
@@ -1888,6 +1896,7 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
iwl_txq_update_write_ptr(priv, &priv->txq[4]);
iwl_txq_update_write_ptr(priv, &priv->txq[5]);
+ priv->isr_stats.wakeup++;
handled |= CSR_INT_BIT_WAKEUP;
}
@@ -1896,11 +1905,13 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
* notifications from uCode come through here*/
if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
iwl3945_rx_handle(priv);
+ priv->isr_stats.rx++;
handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
}
if (inta & CSR_INT_BIT_FH_TX) {
IWL_DEBUG_ISR(priv, "Tx interrupt\n");
+ priv->isr_stats.tx++;
iwl_write32(priv, CSR_FH_INT_STATUS, (1 << 6));
if (!iwl_grab_nic_access(priv)) {
@@ -1911,8 +1922,10 @@ static void iwl3945_irq_tasklet(struct iwl_priv *priv)
handled |= CSR_INT_BIT_FH_TX;
}
- if (inta & ~handled)
+ if (inta & ~handled) {
IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ priv->isr_stats.unhandled++;
+ }
if (inta & ~CSR_INI_SET_MASK) {
IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
--
1.5.6.3
From: Abhijeet Kolekar <[email protected]>
Patch removes the "manual radio disable" parameter
as there is no usage scenario of disabling radio using this module parameter.
User can use iwconfig's txpower to enable and disable radio.
This module parameter also does not work as expected. During module load
the status of radio is set, the radio is not actually disabled. Even so,
the moment mac80211 requests the interface to be up the radio will be
enabled again.
Signed-off-by: Abhijeet Kolekar <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-4965.c | 2 --
drivers/net/wireless/iwlwifi/iwl-5000.c | 3 ---
drivers/net/wireless/iwlwifi/iwl-agn.c | 14 ++------------
drivers/net/wireless/iwlwifi/iwl-core.h | 1 -
drivers/net/wireless/iwlwifi/iwl3945-base.c | 18 ++----------------
5 files changed, 4 insertions(+), 34 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index e4762e5..a98ff4e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -2361,8 +2361,6 @@ MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl4965_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(debug, iwl4965_mod_params.debug, uint, 0444);
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 5bbb4f9..d731a83 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -1655,9 +1655,6 @@ struct iwl_cfg iwl5150_agn_cfg = {
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
-module_param_named(disable50, iwl50_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable50,
- "manually disable the 50XX radio (default 0 [radio on])");
module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
MODULE_PARM_DESC(swcrypto50,
"using software crypto engine (default 0 [hardware])\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index fc52d32..9e41e1b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2774,18 +2774,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
goto out_free_eeprom;
/* At this point both hw and priv are initialized. */
- /**********************************
- * 7. Initialize module parameters
- **********************************/
-
- /* Disable radio (SW RF KILL) via parameter when loading driver */
- if (priv->cfg->mod_params->disable) {
- set_bit(STATUS_RF_KILL_SW, &priv->status);
- IWL_DEBUG_INFO(priv, "Radio disabled.\n");
- }
-
/********************
- * 8. Setup services
+ * 7. Setup services
********************/
spin_lock_irqsave(&priv->lock, flags);
iwl_disable_interrupts(priv);
@@ -2809,7 +2799,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
iwl_setup_rx_handlers(priv);
/**********************************
- * 9. Setup and register mac80211
+ * 8. Setup and register mac80211
**********************************/
/* enable interrupts if needed: hw bug w/a */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 3bc2f6c..d4c60af 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -176,7 +176,6 @@ struct iwl_ops {
};
struct iwl_mod_params {
- int disable; /* def: 0 = enable radio */
int sw_crypto; /* def: 0 = using hardware encryption */
u32 debug; /* def: 0 = minimal debug log messages */
int disable_hw_scan; /* def: 0 = use h/w scan */
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index a776326..34c53ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -4309,20 +4309,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
IWL_INFO(priv, "Detected Intel Wireless WiFi Link %s\n",
priv->cfg->name);
- /***********************************
- * 7. Initialize Module Parameters
- * **********************************/
-
- /* Initialize module parameter values here */
- /* Disable radio (SW RF KILL) via parameter when loading driver */
- if (iwl3945_mod_params.disable) {
- set_bit(STATUS_RF_KILL_SW, &priv->status);
- IWL_DEBUG_INFO(priv, "Radio disabled.\n");
- }
-
-
/***********************
- * 8. Setup Services
+ * 7. Setup Services
* ********************/
spin_lock_irqsave(&priv->lock, flags);
@@ -4350,7 +4338,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
iwl3945_setup_rx_handlers(priv);
/*********************************
- * 9. Setup and Register mac80211
+ * 8. Setup and Register mac80211
* *******************************/
iwl_enable_interrupts(priv);
@@ -4528,8 +4516,6 @@ MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(disable, iwl3945_mod_params.disable, int, 0444);
-MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto,
"using software crypto (default 1 [software])\n");
--
1.5.6.3
From: Johannes Berg <[email protected]>
This limit applies to current (APIv1 and APIv2) 3945 firmware only, not
supported firmware of any of the other cards.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-commands.h | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 29d4074..411a5d2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2469,8 +2469,8 @@ struct iwl_ssid_ie {
u8 ssid[32];
} __attribute__ ((packed));
-#define PROBE_OPTION_MAX_API1 0x4
-#define PROBE_OPTION_MAX 0x14
+#define PROBE_OPTION_MAX_3945 4
+#define PROBE_OPTION_MAX 20
#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
#define IWL_GOOD_CRC_TH cpu_to_le16(1)
#define IWL_MAX_SCAN_SIZE 1024
@@ -2552,7 +2552,7 @@ struct iwl3945_scan_cmd {
struct iwl3945_tx_cmd tx_cmd;
/* For directed active scans (set to all-0s otherwise) */
- struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_API1];
+ struct iwl_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
/*
* Probe request frame, followed by channel list.
--
1.5.6.3
From: Mohamed Abbas <[email protected]>
Allow user to config the device all the time but only allow commiting
these changes to card if the card is up and running.
Signed-off-by: Mohamed Abbas <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
drivers/net/wireless/iwlwifi/iwl-core.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index bf7ad51..3dec2d2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2474,12 +2474,6 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
mutex_lock(&priv->mutex);
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- ret = -EIO;
- goto out;
- }
-
IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
conf->channel->hw_value, changed);
@@ -2574,6 +2568,11 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
goto out;
}
+ if (!iwl_is_ready(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ goto out;
+ }
+
if (scan_active)
goto out;
--
1.5.6.3
From: Jay Sternberg <[email protected]>
Fix the bug where some revisions of 6000 series hardware cannot
be used. Later versions of 6000 series have the EEPROM replaced by
OTP. For these devices to be used we need to expand valid EEPROM mask.
Signed-off-by: Jay Sternberg <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
---
Please apply this patch to 2.6.30 also.
drivers/net/wireless/iwlwifi/iwl-csr.h | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 2f12424..6e98314 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -223,7 +223,7 @@
#define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000)
/* EEPROM GP */
-#define CSR_EEPROM_GP_VALID_MSK (0x00000006)
+#define CSR_EEPROM_GP_VALID_MSK (0x00000007)
#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
--
1.5.6.3