From: Juuso Oikarinen <[email protected]>
On the disassociation event from the mac80211, the wl12xx driver does not
clear the chipset configuration related to the AP - i.e. it does not perform
a DISCONNECT and then a JOIN with zero SSID and dummy BSSID. Also, it does not
unset the BSSID filter.
Often this is not a problem, as the above is performed upon entering idle
state. But if a scenario arises where a new association is attempted without
cycling through idle state, the new association will fail.
Fix this by resetting the firmware state on disassociation.
Signed-off-by: Juuso Oikarinen <[email protected]>
---
v2: Changed the function calls to ones with a bit narrower scope
drivers/net/wireless/wl12xx/main.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 31f0e2f..c523778 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2012,6 +2012,10 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
/* Disable the keep-alive feature */
ret = wl1271_acx_keep_alive_mode(wl, false);
+ /* restore the bssid filter and go to dummy bssid */
+ wl1271_handle_idle(wl, true);
+ wl1271_handle_idle(wl, false);
+
if (ret < 0)
goto out_sleep;
}
--
1.7.1