Parsing data using bitfields is messy, because it makes endian handling
much harder. AR9002 and earlier got it right, AR9003 got it wrong.
This might lead to either using too high or too low tx power values,
depending on frequency and eeprom settings.
Fix it by getting rid of the CTL related bitfields entirely and use
masks instead.
Signed-off-by: Felix Fietkau <[email protected]>
Cc: [email protected]
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 73 ++++++++++++-----------
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 9 +--
drivers/net/wireless/ath/ath9k/eeprom.c | 6 +-
drivers/net/wireless/ath/ath9k/eeprom.h | 13 +---
4 files changed, 47 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index c418235..a7b82f0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -55,6 +55,8 @@
#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
+#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
+
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
@@ -290,20 +292,21 @@ static const struct ar9300_eeprom ar9300_default = {
}
},
.ctlPowerData_2G = {
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
},
.modalHeader5G = {
/* 4 idle,t1,t2,b (4 bits per setting) */
@@ -568,56 +571,56 @@ static const struct ar9300_eeprom ar9300_default = {
.ctlPowerData_5G = {
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 0}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 0}, {60, 1}, {60, 1}, {60, 0},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
- {60, 0}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 0}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
}
},
}
@@ -1827,9 +1830,9 @@ static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
if (is2GHz)
- return ctl_2g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
else
- return ctl_5g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
}
static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
@@ -1847,12 +1850,12 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
if (is2GHz) {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
- ctl_2g[idx].ctlEdges[edge - 1].flag)
- return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
} else {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
- ctl_5g[idx].ctlEdges[edge - 1].flag)
- return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
}
return AR9300_MAX_RATE_POWER;
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 3c533bb..655b303 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -261,17 +261,12 @@ struct cal_tgt_pow_ht {
u8 tPow2x[14];
} __packed;
-struct cal_ctl_edge_pwr {
- u8 tPower:6,
- flag:2;
-} __packed;
-
struct cal_ctl_data_2g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
} __packed;
struct cal_ctl_data_5g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
struct ar9300_eeprom {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index 1266333..2bbf94d 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -240,16 +240,16 @@ u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower,
for (i = 0; (i < num_band_edges) &&
(pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
- twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+ twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl);
break;
} else if ((i > 0) &&
(freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
is2GHz))) {
if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel,
is2GHz) < freq &&
- pRdEdgesPower[i - 1].flag) {
+ CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) {
twiceMaxEdgePower =
- pRdEdgesPower[i - 1].tPower;
+ CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl);
}
break;
}
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index dacb45e..41ad1fe 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -233,6 +233,9 @@
#define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
+#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
+#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
@@ -535,18 +538,10 @@ struct cal_target_power_ht {
u8 tPow2x[8];
} __packed;
-
-#ifdef __BIG_ENDIAN_BITFIELD
-struct cal_ctl_edges {
- u8 bChannel;
- u8 flag:2, tPower:6;
-} __packed;
-#else
struct cal_ctl_edges {
u8 bChannel;
- u8 tPower:6, flag:2;
+ u8 ctl;
} __packed;
-#endif
struct cal_data_op_loop_ar9287 {
u8 pwrPdg[2][5];
--
1.7.3.2
A few LNA control related flags were also specified as a bitfields, however
for some strange reason they were written in big-endian order this time.
Fix this by using flags instead.
Signed-off-by: Felix Fietkau <[email protected]>
---
drivers/net/wireless/ath/ath9k/eeprom.h | 14 ++++++++++----
drivers/net/wireless/ath/ath9k/eeprom_def.c | 11 ++++++-----
2 files changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 41ad1fe..dd59f09 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -236,6 +236,15 @@
#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+#define LNA_CTL_BUF_MODE BIT(0)
+#define LNA_CTL_ISEL_LO BIT(1)
+#define LNA_CTL_ISEL_HI BIT(2)
+#define LNA_CTL_BUF_IN BIT(3)
+#define LNA_CTL_FEM_BAND BIT(4)
+#define LNA_CTL_LOCAL_BIAS BIT(5)
+#define LNA_CTL_FORCE_XPA BIT(6)
+#define LNA_CTL_USE_ANT1 BIT(7)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
@@ -381,10 +390,7 @@ struct modal_eep_header {
u8 xatten2Margin[AR5416_MAX_CHAINS];
u8 ob_ch1;
u8 db_ch1;
- u8 useAnt1:1,
- force_xpaon:1,
- local_bias:1,
- femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+ u8 lna_ctl;
u8 miscBits;
u16 xpaBiasLvlFreq[3];
u8 futureModal[6];
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 76b4d65..526d7c9 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -451,9 +451,10 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
AR_AN_TOP2_LOCALBIAS,
AR_AN_TOP2_LOCALBIAS_S,
- pModal->local_bias);
+ !!(pModal->lna_ctl &
+ LNA_CTL_LOCAL_BIAS));
REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
- pModal->force_xpaon);
+ !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
}
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
@@ -1428,9 +1429,9 @@ static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
num_ant_config = 1;
- if (pBase->version >= 0x0E0D)
- if (pModal->useAnt1)
- num_ant_config += 1;
+ if (pBase->version >= 0x0E0D &&
+ (pModal->lna_ctl & LNA_CTL_USE_ANT1))
+ num_ant_config += 1;
return num_ant_config;
}
--
1.7.3.2