Channel 14 is only supported in Japan (JP country code in).
The FW limits tranmissions to CCK only on this channel.
Tested in both STA and AP modes to work correctly.
Signed-off-by: Arik Nemtsov <[email protected]>
---
drivers/net/wireless/wl12xx/main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 9076555..59582ab 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -2771,6 +2771,7 @@ static struct ieee80211_channel wl1271_channels[] = {
{ .hw_value = 11, .center_freq = 2462, .max_power = 25 },
{ .hw_value = 12, .center_freq = 2467, .max_power = 25 },
{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
+ { .hw_value = 14, .center_freq = 2484, .max_power = 25 },
};
/* mapping to indexes for wl1271_rates */
--
1.7.1
On Tue, 2011-01-18 at 20:39 +0100, Arik Nemtsov wrote:
> Channel 14 is only supported in Japan (JP country code in).
> The FW limits tranmissions to CCK only on this channel.
>
> Tested in both STA and AP modes to work correctly.
>
> Signed-off-by: Arik Nemtsov <[email protected]>
> ---
Good, thanks Arik!
I guess instead of (JP country code in) you meant (JP country code in
regdb), right? I'll fix that manually before applying.
--
Cheers,
Luca.
On Tue, 2011-01-18 at 20:39 +0100, Arik Nemtsov wrote:
> Channel 14 is only supported in Japan (JP country code in).
> The FW limits tranmissions to CCK only on this channel.
>
> Tested in both STA and AP modes to work correctly.
>
> Signed-off-by: Arik Nemtsov <[email protected]>
> ---
Applied to wl12xx. Thank you!
--
Cheers,
Luca.
On Wed, Jan 19, 2011 at 09:05, Luciano Coelho <[email protected]> wrote:
>
> On Tue, 2011-01-18 at 20:39 +0100, Arik Nemtsov wrote:
> > Channel 14 is only supported in Japan (JP country code in).
> > The FW limits tranmissions to CCK only on this channel.
> >
> > Tested in both STA and AP modes to work correctly.
> >
> > Signed-off-by: Arik Nemtsov <[email protected]>
> > ---
>
> Good, thanks Arik!
>
> I guess instead of (JP country code in) you meant (JP country code in
> regdb), right? I'll fix that manually before applying.
>
Yes Luca. Thanks.
Regards,
Arik