From: Brian Cavagnolo <[email protected]>
When the mwl8k driver attempts and fails to switch from sta to ap
firmware (or vice-versa) in the mwl8k_add_interface routine, the
mwl8k_stop routine will be called. This routine must not attempt
to free the irq if it was not requested.
Signed-off-by: Brian Cavagnolo <[email protected]>
Signed-off-by: Nishant Sarmukadam <[email protected]>
---
drivers/net/wireless/mwl8k.c | 9 ++++++++-
1 files changed, 8 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index d5e0479..8913180 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -157,6 +157,7 @@ struct mwl8k_ampdu_stream {
struct mwl8k_priv {
struct ieee80211_hw *hw;
struct pci_dev *pdev;
+ int irq;
struct mwl8k_device_info *device_info;
@@ -4272,9 +4273,11 @@ static int mwl8k_start(struct ieee80211_hw *hw)
rc = request_irq(priv->pdev->irq, mwl8k_interrupt,
IRQF_SHARED, MWL8K_NAME, hw);
if (rc) {
+ priv->irq = -1;
wiphy_err(hw->wiphy, "failed to register IRQ handler\n");
return -EIO;
}
+ priv->irq = priv->pdev->irq;
/* Enable TX reclaim and RX tasklets. */
tasklet_enable(&priv->poll_tx_task);
@@ -4311,6 +4314,7 @@ static int mwl8k_start(struct ieee80211_hw *hw)
if (rc) {
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
free_irq(priv->pdev->irq, hw);
+ priv->irq = -1;
tasklet_disable(&priv->poll_tx_task);
tasklet_disable(&priv->poll_rx_task);
}
@@ -4329,7 +4333,10 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
/* Disable interrupts */
iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
- free_irq(priv->pdev->irq, hw);
+ if (priv->irq != -1) {
+ free_irq(priv->pdev->irq, hw);
+ priv->irq = -1;
+ }
/* Stop finalize join worker */
cancel_work_sync(&priv->finalize_join_worker);
--
1.6.0.3