From: Mohammed Shafi Shajakhan <[email protected]>
checking the status of PAPRD_AGC2_POWER(Log(ADC_power) measured after
last gain-change in dB) field suggests whether the PAPRD is completely/properly
done. This is an additional check apart from polling for PAPRD done bit being set.
Susinder suggests that the ideal power range value should be
0xf0 to 0xfe. With AR9382 we do have the values in this range. to have a
common check for all platforms we take agc2_power should be atleast greater
than 0xe0
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mohammed Shafi Shajakhan <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 21 ++++++++++++++++++++-
drivers/net/wireless/ath/ath9k/hw.h | 5 +++--
2 files changed, 23 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 2e7f0f2..fc9c08f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -785,7 +785,26 @@ EXPORT_SYMBOL(ar9003_paprd_init_table);
bool ar9003_paprd_is_done(struct ath_hw *ah)
{
- return !!REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_STAT1,
+ int paprd_done, agc2_pwr;
+ paprd_done = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_STAT1,
AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE);
+
+ if (paprd_done == 0x1) {
+ agc2_pwr = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_STAT1,
+ AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_AGC2_PWR);
+
+ ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+ "AGC2_PWR = 0x%x training done = 0x%x\n",
+ agc2_pwr, paprd_done);
+ /*
+ * agc2_pwr range should not be less than 'IDEAL_AGC2_PWR_CHANGE'
+ * when the training is completely done, otherwise retraining is
+ * done to make sure the value is in ideal range
+ */
+ if (agc2_pwr <= PAPRD_IDEAL_AGC2_PWR_RANGE)
+ paprd_done = 0;
+ }
+
+ return !!paprd_done;
}
EXPORT_SYMBOL(ar9003_paprd_is_done);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 6a6fb54..66d2225 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -157,8 +157,9 @@
#define ATH9K_HW_RX_HP_QDEPTH 16
#define ATH9K_HW_RX_LP_QDEPTH 128
-#define PAPRD_GAIN_TABLE_ENTRIES 32
-#define PAPRD_TABLE_SZ 24
+#define PAPRD_GAIN_TABLE_ENTRIES 32
+#define PAPRD_TABLE_SZ 24
+#define PAPRD_IDEAL_AGC2_PWR_RANGE 0xe0
enum ath_hw_txq_subtype {
ATH_TXQ_AC_BE = 0,
--
1.7.0.4