Fix the value of PG version for 128x at sysfs, remove write permissions
from PG version (hw_pg_ver) in sysfs and add remove files
(hw_pg_ver,bt_coex_state) from sysfs while freeing hardware.
New macro names for register Fuse_data_2_1 depend on architecture.
Propagate chip id through wiphy in PLT mode which still not work of
a bug in ethtool.
Signed-off-by: Gery Kahn <[email protected]>
---
The patch replacing the other patch "wl12xx: Fix for PG version and sysfs files"
drivers/net/wireless/wl12xx/boot.c | 13 ++++++++-----
drivers/net/wireless/wl12xx/boot.h | 3 ++-
drivers/net/wireless/wl12xx/main.c | 12 +++++++++++-
3 files changed, 21 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 5ebc64d..a816f2f 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -549,13 +549,13 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
{
u32 fuse;
- fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
+ if (wl->chip.id == CHIP_ID_1283_PG20)
+ fuse = wl1271_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1);
+ else
+ fuse = wl1271_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1);
fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;
wl->hw_pg_ver = (s8)fuse;
-
- if (((wl->hw_pg_ver & PG_MAJOR_VER_MASK) >> PG_MAJOR_VER_OFFSET) < 3)
- wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
}
static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
@@ -696,7 +696,8 @@ static int wl127x_boot_clk(struct wl1271 *wl)
u32 pause;
u32 clk;
- wl1271_boot_hw_version(wl);
+ if (((wl->hw_pg_ver & PG_MAJOR_VER_MASK) >> PG_MAJOR_VER_OFFSET) < 3)
+ wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
wl->ref_clock == CONF_REF_CLK_38_4_E ||
@@ -750,6 +751,8 @@ int wl1271_load_firmware(struct wl1271 *wl)
u32 tmp, clk;
int selected_clock = -1;
+ wl1271_boot_hw_version(wl);
+
if (wl->chip.id == CHIP_ID_1283_PG20) {
ret = wl128x_boot_clk(wl, &selected_clock);
if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/boot.h b/drivers/net/wireless/wl12xx/boot.h
index e8f8255..06dad93 100644
--- a/drivers/net/wireless/wl12xx/boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -55,7 +55,8 @@ struct wl1271_static_data {
#define OCP_REG_CLK_POLARITY 0x0cb2
#define OCP_REG_CLK_PULL 0x0cb4
-#define REG_FUSE_DATA_2_1 0x050a
+#define WL127X_REG_FUSE_DATA_2_1 0x050a
+#define WL128X_REG_FUSE_DATA_2_1 0x2152
#define PG_VER_MASK 0x3c
#define PG_VER_OFFSET 2
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index e58c22d..1bed104 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1395,6 +1395,7 @@ out:
int wl1271_plt_start(struct wl1271 *wl)
{
int retries = WL1271_BOOT_RETRIES;
+ struct wiphy *wiphy = wl->hw->wiphy;
int ret;
mutex_lock(&wl->mutex);
@@ -1428,6 +1429,11 @@ int wl1271_plt_start(struct wl1271 *wl)
wl1271_notice("firmware booted in PLT mode (%s)",
wl->chip.fw_ver_str);
+ /* update hw/fw version info in wiphy struct */
+ wiphy->hw_version = wl->chip.id;
+ strncpy(wiphy->fw_version, wl->chip.fw_ver_str,
+ sizeof(wiphy->fw_version));
+
goto out;
irq_disable:
@@ -4126,7 +4132,7 @@ static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev,
return len;
}
-static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR,
+static DEVICE_ATTR(hw_pg_ver, S_IRUGO,
wl1271_sysfs_show_hw_pg_ver, NULL);
static ssize_t wl1271_sysfs_read_fwlog(struct file *filp, struct kobject *kobj,
@@ -4522,6 +4528,10 @@ int wl1271_free_hw(struct wl1271 *wl)
mutex_unlock(&wl->mutex);
device_remove_bin_file(&wl->plat_dev->dev, &fwlog_attr);
+
+ device_remove_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver);
+
+ device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state);
platform_device_unregister(wl->plat_dev);
free_page((unsigned long)wl->fwlog);
dev_kfree_skb(wl->dummy_packet);
--
1.7.0.4
On Mon, 2011-07-18 at 14:21 +0300, Gery Kahn wrote:
> Fix the value of PG version for 128x at sysfs, remove write permissions
> from PG version (hw_pg_ver) in sysfs and add remove files
> (hw_pg_ver,bt_coex_state) from sysfs while freeing hardware.
> New macro names for register Fuse_data_2_1 depend on architecture.
> Propagate chip id through wiphy in PLT mode which still not work of
> a bug in ethtool.
>
>
> Signed-off-by: Gery Kahn <[email protected]>
> ---
Applied and pushed, thanks Gery.
--
Cheers,
Luca.