Adding a module parameter to allow setting the global debug level.
No need to recompile the module anymore to set the debug level.
Signed-off-by: Stefan Assmann <[email protected]>
---
drivers/net/wireless/rtlwifi/debug.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
index 5fa7385..1d82639 100644
--- a/drivers/net/wireless/rtlwifi/debug.c
+++ b/drivers/net/wireless/rtlwifi/debug.c
@@ -28,12 +28,16 @@
#include "wifi.h"
+static unsigned int debug = DBG_EMERG;
+module_param(debug, uint, 0);
+MODULE_PARM_DESC(debug, "Set global debug level for rtlwifi (uint)");
+
void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
u8 i;
- rtlpriv->dbg.global_debuglevel = DBG_EMERG;
+ rtlpriv->dbg.global_debuglevel = debug;
rtlpriv->dbg.global_debugcomponents =
COMP_ERR | COMP_FW | COMP_INIT | COMP_RECV | COMP_SEND |
--
1.7.6
On 12.08.2011 22:33, Larry Finger wrote:
> On 08/12/2011 02:22 PM, Stefan Assmann wrote:
>> Adding a module parameter to allow setting the global debug level.
>> No need to recompile the module anymore to set the debug level.
>>
>> Signed-off-by: Stefan Assmann<[email protected]>
>> ---
>> drivers/net/wireless/rtlwifi/debug.c | 6 +++++-
>> 1 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
>> index 5fa7385..1d82639 100644
>> --- a/drivers/net/wireless/rtlwifi/debug.c
>> +++ b/drivers/net/wireless/rtlwifi/debug.c
>> @@ -28,12 +28,16 @@
>>
>> #include "wifi.h"
>>
>> +static unsigned int debug = DBG_EMERG;
>> +module_param(debug, uint, 0);
>> +MODULE_PARM_DESC(debug, "Set global debug level for rtlwifi (uint)");
>
> As the system puts a (uint) following the description when the modinfo command
> is used, the one above is redundant. Replace it with (0,2-5) instead. I have no
> idea why there is a hole in the debug levels, but I hesitate to close it. Also,
> send patches to John Linville with Cc to wireless.
>
> Thanks for doing this. I'll sign off on it when you send V2.
Snap, I missed that. Thanks for pointing it out. V2 should be coming
around shortly.
Stefan
On 08/12/2011 02:22 PM, Stefan Assmann wrote:
> Adding a module parameter to allow setting the global debug level.
> No need to recompile the module anymore to set the debug level.
>
> Signed-off-by: Stefan Assmann<[email protected]>
> ---
> drivers/net/wireless/rtlwifi/debug.c | 6 +++++-
> 1 files changed, 5 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
> index 5fa7385..1d82639 100644
> --- a/drivers/net/wireless/rtlwifi/debug.c
> +++ b/drivers/net/wireless/rtlwifi/debug.c
> @@ -28,12 +28,16 @@
>
> #include "wifi.h"
>
> +static unsigned int debug = DBG_EMERG;
> +module_param(debug, uint, 0);
> +MODULE_PARM_DESC(debug, "Set global debug level for rtlwifi (uint)");
As the system puts a (uint) following the description when the modinfo command
is used, the one above is redundant. Replace it with (0,2-5) instead. I have no
idea why there is a hole in the debug levels, but I hesitate to close it. Also,
send patches to John Linville with Cc to wireless.
Thanks for doing this. I'll sign off on it when you send V2.
Larry
> +
> void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
> {
> struct rtl_priv *rtlpriv = rtl_priv(hw);
> u8 i;
>
> - rtlpriv->dbg.global_debuglevel = DBG_EMERG;
> + rtlpriv->dbg.global_debuglevel = debug;
>
> rtlpriv->dbg.global_debugcomponents =
> COMP_ERR | COMP_FW | COMP_INIT | COMP_RECV | COMP_SEND |